High-Temperature Phase Relations in the System Y2O3-Ta2O5

The phase relations for the system y₂o₃–Ta₂o₅ in the composition range 50 to 100 mol% Y₂O₃ have been studied by solid-state reactions at 1350°, 1500°, or 17000C and by thermal analyses up to the melting temperatures. Weberite-type orthorhombic phases (W2 phase, space group C222₁), fluorite-type cubic phases (F phase, space group Fm3m )and another orthorhombic phase (O phase, space group Cmmm )are found in the system. The W2 phase forms in 75 mol% Y₂O₃ under 17000C and O phase in 70 mol% Y₂O₃ up to 1700°C These phases seem to melt incongruently. The F phase forms in about 80 mol% Y₂O₃ and melts congruently at 2454° 3°C. Two eutectic points seem to exist at about 2220°C 90 mol% Y²O₃, and at about 1990°C, 62 mol% Y₂O₃. A Phase diagram including the above three phases were not identified with each other.     

Phase Relations in the Pyrochlore-Rich Part of the Bi2O3−TiO2−Nd2O3 System

In this study we used solid-state synthesis to determine the phase relations in the pyrochlore-rich part of the Bi₂O₃−TiO₂−Nd₂O₃ system at 1100°C. The samples were analyzed using X-ray powder diffraction and scanning electron microscopy with energy- and wavelength-dispersive spectroscopy. A single-phase pyrochlore ceramic was obtained with the addition of 4.5 mol% of Nd₂O₃. We determined the solubility limits for the three solid solutions: (i) the pyrochlore solid solution Bi_{(1.6–1.08 x )}Nd _x Ti₂O_{(6.4+0.3 x )}, where 0.25< x <0.96; (ii) the solid solution Bi_{4− x} Nd _x Ti₃O₁₂, where 0< x <2.6; and (iii) the Nd_{2− x} Bi _x Ti₂O₇ solid solution, where 0< x <0.35. The determined phase relations in the pyrochlore-rich part are presented in a partial phase diagram of the Bi₂O₃−TiO₂−Nd₂O₃ system in air at 1100°C.     

Phase Equilibria in the Pseudoternary System ZrO2−Y2O3−Cr2O3 at 1600°C in Air

The pseudoternary system ZrO₂-Y₂O₃-Cr₂O₃ was studied at 1600°C in air by the quenching method. Only one intermediate compound, YCrO₃, was observed on the Y₂O₃−Cr₂O₃ join. ZrO₂ and Y₂O₃ formed solid solutions with solubility limits of 47 and 38 mol%, respectively. The apex of the compatibility triangle for the cubic ZrO₂, Cr₂O₃, and YCrO₃ three-phase region was located at =17 mol% Y₂O₃ (83 mol% ZrO₂). Below 17 mol% Y₂O₃, ZrO₂ solid solution coexisted with Cr₂O₃. Cr₂O₃ appears to be slightly soluble in ZrO₂(ss).     

Solid-Liquid Reaction in the Si3N4-AlN-Y2O3 System under 1 MPa of Nitrogen

The melting behaviors of selected compositions in the Si₃N₄-AlN-Y₂O₃ system were determined under 1 MPa of nitrogen. The phase diagrams of the ternary and their binary systems are presented. The lowest melting composition of the ternary system contains 15 mol % Si₃N₄, 25 mol % AIN, and 60 mol % Y₂O₃ and has a melting temperature of 1650°C. The binary eutectic compositions and temperatures are 15 mol % Si₃N₄ and 85 mol % Y₂O₃ at 1720°C, and 20 mol % AIN and 80 mol% Y₂O₃ at 1730°C.     

Phase Relations in the System Fe2O3–Fe3O4–YFeO3 in Air

Measurements were made of temperature and ternary composition for coexisting liquid and crystalline phases on the air isobar in the system Fe₂O₃-Fe₃O₄-YFeO₃ with particular regard to the stability range and compositional limits of yttrium iron garnet. Phase equilibrium relations were determined by conventional quenching techniques combined with measurements of loss in weight at the reaction temperature to locate true ternary compositions. The intersection of the air isobar with the ternary univariant boundary curve for coexisting magnetite, garnet, and liquid phases results in a eutectic-type situation at the composition Y_0.27Fe_1.73 O_2.87 and 1469°± 2°C. A similar intersection of the isobar with the boundary curve for coexisting garnet, orthoferrite, and liquid phases gives rise to a peritectic-type reaction at 1555° 3°C. and Y_0.44Fe_1.56 O_2.89 The yttrium iron garnet crystallizing from liquids within these temperature and composition limits contains up to 0.5 mole % iron oxide in excess of the stoichiometric formula in terms of the starting composition 37.5 mole % Y₂O₃, 62.5 mole % Fe₂O₃. At 1470° C. the garnet phase in equilibrium with oxide liquid contains 2 mole % FeO in solid solution. The small solubility of excess of iron oxide and partial reduction of the garnet phase in air are unavoidable during equilibrium growth from the melt.     

Phase Equilibria and Ordering in the System ZrO2-Y2O3

The phase diagram for the system ZrO₂-Y₂O₃ was redetermined. The extent of the fluorite-type ZrO₂-Y_zO₃ solid solution field was determined with a high-temperature X-ray furnace, precise lattice parameter measurements, and a hydrothermal technique. Long range ordering occurred at 40 mol% Y₂O₃ and the corresponding ordered phase was Zr₃Y₄OL₁₂. The compound has rhombohedra1 symmetry (space group R 3), is isostructural with UY₆O_l2 and decomposes above 1250±50°C. The results indicate that the eutectoid may occur at a temperature <400°C at a composition between 20 and 30 mol% Y₂O₃ Determination of the liquidus line indicated a eutectic at 83± 1 mol% Y₂O₃ and a peritectic at 76 ± 1 mol% Y₂O₃.     

Subsolidus Phase Equilibria and Ordering in the System ZrO2-Y2O3

The subsolidus phase relations in the entire system ZrO₂-Y₂O₃ were established using DTA, expansion measurements, and room- and high-temperature X-ray diffraction. Three eutectoid reactions were found in the system: ( a ) tetragonal zirconia solid solution→monoclinic zirconia solid solution+cubic zirconia solid solution at 4.5 mol% Y₂O₃ and ∼490°C, ( b ) cubic zirconia solid solutiow→δ-phase Y₄Zr₃O₁₂+hexagonalphase Y₆ZrO₁₁ at 45 mol% Y₂O₃ and ∼1325°±25°C, and ( c ) yttria C -type solid solution→wcubic zirconia solid solution+ hexagonal phase Y₆ZrO₁₁ at ∼72 mol% Y₂O₃ and 1650°±50°C. Two ordered phases were also found in the system, one at 40 mol% Y₂O₃ with ideal formula Y₄Zr₃O₁₂, and another, a new hexagonal phase, at 75 mol% Y₂O₃ with formula Y₆ZrO₁₁. They decompose at 1375° and >1750°C into cubic zirconia solid solution and yttria C -type solid solution, respectively. The extent of the cubic zirconia and yttria C -type solid solution fields was also redetermined. By incorporating the known tetragonal-cubic zirconia transition temperature and the liquidus temperatures in the system, a new tentative phase diagram is given for the system ZrO₂-Y₂O₃.     

Ionic Conductivity of Cubic Solid Solutions in the System CaO—Y2O3—ZrO2

The ionic conductivity of cubic solid solutions in the system CaO -Y₂O₃-ZrO₂ was examined. Particular Y₂O₃-ZrO₂ binary compositions were more conductive at elevated temperatures (>600°C) than either CaO-ZrO₂ binary or CaO-Y₂O₃-ZrO₂ ternary compositions. The higher ionic conductivity appears to be related to a lower activation energy rather than to the number of oxygen vacancies dictated by composition. Those compositions of highest conductivity lie close to the cubic-monoclinic solid-solution phase boundary. Conductivity-temperature data are presented that indicate a reversible order-disorder transition for Y₂O₃-ZrO₂ cubic solid solutions containing 20 and 25 mole % Y₂O₃. The transference number for the oxygen ion at 1000°C for Y₂O₂-ZrO₂ cubic solid solutions is greater than 0.99.     

Phase Equilibria in the System CaO-Yb2O3

Phase equilibrium relations in the system CaO-Yb₂O₃ were studied. Results of this work demonstrated the existence of four crystalline phases: Yb₂O₃.3CaO, Yb₂O₃.2CaO, Yb₂O₃°CaO, and 2Yb₂O₃°CaO. The 2Yb₂O₃°CaO phase is metastable at all temperatures and was obtained only by rapid quenching from the melt. The crystalline solubility limit of Yb_aO₃ in CaO at 1850°C is slightly greater than 8 mole %, whereas no solubility of CaO in Yb₂O₃ was detected. All four compounds have subsolidus minimums of stability and dissociate into the component oxides below 1800°C. Data are also presented for the systems CaO-Gd₂O₃ and CaO-La₂O₃.     

Subsolidus Relations in the La2O3─CuO─CaO Phase Diagram and the La2O3─CuO Binary Join

The phase diagram for the CuO-rich part of the La₂O₃─CuO join was redetermined. La₂Cu₂O₅ was found to have a lower limit of stability at 1002°± 5°C and an incongruent melting temperature of ∼1035°C. LagCu₇O₁₉ had both a lower (1012°± 5°C) and an upper (1027°± 5°C) limit of stability. Subsolidus phase relations were studied in the La₂O₃─CuO─CaO system at 1000°, 1020°, and 1050°C in air. Two ternary phases, La_1.9Ca_1.1Cu₂O_5.9 and LaCa₂Cu₃O_8.6, were stable at these temperatures, with three binary phases, Ca₂CuO₃, CaCu₂O₃, and La₂CuO₄. La₂Cu₂O₅ and La₈Cu₇O₁₉ were stable only at 1020°C, and did not support solid-solution formation.     

Experimental Investigation and Thermodynamic Assessment of the Nd2O3–Y2O3 System

The phase relations in the Nd₂O₃–Y₂O₃ system were experimentally studied in the 1300°–1600°C range. X-ray diffraction, scanning electron microscopy, and electron probe microanalysis were applied to analyze the phase composition of annealed Nd₂O₃–Y₂O₃ mixtures with varying Y₂O₃ content. A thermodynamic assessment was conducted using the experimental data obtained. The excess Gibbs energies of the solution phases were described based on a simple substitutional solution model. A consistent set of optimized interaction parameters was derived for the Gibbs energy of the constituent phases, resulting in a good match between calculated and experimental data.     

Phase Equilibria in the System HfO2–Y2O3–CaO

Phase equilibria in the system HfO₂–Y₂O₃–CaO were studied in the temperature range 1250° to 2850°C by both experimental methods (X-ray phase analysis at 20° to 2000°C, petrography, annealing and quenching, differential thermal analysis in He at temperatures to 2500°C, thermal analysis in air using a solar furnace at temperatures to 3000°C, and electron microprobe X-ray analysis) and theoretical means (development of a mathematical model for the liquidus surface by means of the reduced polynomial method). Phase equilibria were determined by the structure of the restricting binary systems. No ternary compounds were found. The liquidus was characterized by the presence of six four-phase, invariant equilibria. Solid solutions were based on monoclinic (M), tetragonal (T), and cubic (F) modifications of HfO₂; C and H forms of Y₂O₃; CaO; and CaHfO₃ that crystallized in two polymorphous modifications, namely, the cubic and rhombic perovskite-type structure.     

Phase Relations and Ordering in the Systems MgO-Y2O3-ZrO2 and CaO-MgO-ZrO2

The phase relations in the systems MgO-Y₂O₃-ZrO₂ and CaO-MgO-ZrO₂ were established at 1220° and 1420°C. The system MgO-Y₂O₃-ZrO₂ possesses a much-larger cubic ZrO₂ solid solution phase field than the system CaO-MgO-ZrO₂ at both temperatures. The ordered δ phase (Zr₃Y₄O₁₂) was found to be stable in the system ZrO₂-Y₂O₃ at 1220°C. Two ordered phases φ₁ (CaZr₄O₉) and φ₂ (Ca₆Zr₁₉O₄₄) were stable at 1220°C in the system ZrO₂-CaO. At 1420°C no ordered phase appears in either system, in agreement with the previously determined temperature limits of the stability for the δ, φ₁, and φ₂ phases. The existence of the compound Mg₃Y_zO₆ could not be confirmed.     

High-Temperature Phase Relations in the Sc2O3-Ta2O5 System

The phase relations for the Sc₂O₃-Ta₂O₅ system in the composition range of 50-100 mol% Sc₂O₃ have been studied by using solid-state reactions at 1350°, 1500°, or 1700°C and by using thermal analyses up to the melting temperatures. The Sc_5.5Ta_1.5O₁₂ phase, defect-fluorite-type cubic phase (F-phase, space group Fm 3 m ), ScTaO₄, and Sc₂O₃ were found in the system. The Sc_5.5Ta_1.5O₁₂ phase formed in 78 mol% Sc₂O₃ at <1700°C and seemed to melt incongruently. The F-phase formed in ∼75 mol% Sc₂O₃ and decomposed to Sc_5.5Ta_1.5O₁₂ and ScTaO₄ at <1700°C. The F-phase melted congruently at 2344°± 2°C in 80 mol% Sc₂O₃. The eutectic point seemed to exist at ∼2300°C in 90 mol% Sc₂O₃. A phase diagram that includes the four above-described phases has been proposed, instead of the previous diagram in which those phases were not identified.     

Zirconium Aluminum Carbides: New Precursors for Synthesizing ZrO2–Al2O3 Composites

ZrO₂–Al₂O₃ nanocrystalline powders have been synthesized by oxidizing ternary Zr₂Al₃C₄ powders. The simultaneous oxidation of Al and Zr in Zr₂Al₃C₄ results in homogeneous mixture of ZrO₂ and Al₂O₃ at nanoscale. Bulk nano- and submicro-composites were prepared by hot-pressing as-oxidized powders at 1100°–1500°C. The composition and microstructure evolution during sintering was investigated by XRD, Raman spectroscopy, SEM, and TEM. The crystallite size of ZrO₂ in the composites increased from 7.5 nm for as-oxidized powders to about 0.5 μm at 1500°C, while the tetragonal polymorph gradually converted to monolithic one with increasing crystallite size. The Al₂O₃ in the composites transformed from an amorphous phase in as oxidized powders to θ phase at 1100°C and α phase at higher temperatures. The hardness of the composite increased from 2.0 GPa at 1100°C to 13.5 GPa at 1400°C due to the increase of density.     

The System Al2O3-Cr2O3-Sio2

Liquidus phase equilibrium data are presented for the system Al₂O₃-Cr₂O₃-SiO₂. The liquidus diagram is dominated by a large, high-temperature, two-liquid region overlying the primary phase field of corundum solid solution. Other important features are a narrow field for mullite solid solution, a very small cristobalite field, and a ternary eutectic at 1580°C. The eutectic liquid (6Al₂O₃-ICr₂O₃-93SiO₂) coexists with a mullite solid solution (61Al₂O₃-10Cr₂O₃-29SiO₂), a corundum solid solution (19Al₂O₃-81Cr₂O₃), and cristobalite (SO₂). Diagrams are presented to show courses of fractional crystallization, courses of equilibrium crystallization, and phase relations on isothermal planes at 1800°, 1700°, and 1575°C. Tie lines were sketched to indicate the composition of coexisting mullite and corundum solid solution phases.     

Phase Relations in the System Al2O3–B2O3–Nd2O3

The phase relations at a temperature below "subsolidus" in the system Al₂O₃–B₂O₃–Nd₂O₃ are reported. Specimens were prepared from various compositions of Al₂O₃, B₂O₃, and Nd₂O₃ of purity 99.5%, 99.99%, and 99.9%, respectively, and fired at 1100°C. There are six binary compounds and one ternary compound in this system. The ternary compound, NdAl₃(BO₃)₄ (NAB), has a phase transition at 950°C ± 15°C. The high-temperature form of NAB has a second harmonic generation (SHG) efficiency of KH₂PO₄ (KDP) of the order of magnitude of the form which has been used as a good self-activated laser material, and the low-temperature form of NAB has no SHG efficiency.     

Phase Relations in the System ZrO2-Y2O3 at Low Y2O3 Contents

Subsolidus phase relations in the low-Y₂O₃ portion of the system ZrO_2-Y₂O₃ were studied using DTA with fired samples and X-ray phase identification and lattice parameter techniques with quenched samples. Approximately 1.5% Y₂O₃ is soluble in monoclinic ZrO₂, a two-phase monoclinic solid solution plus cubic solid solution region exists to ∼7.5% Y₂O₃ below ∼500°C, and a two-phase tetragonal solid solution plus cubic solid solution exists from ∼1.5 to 7.5% Y₂O₃ from ∼500° to ∼1600°C. At higher Y₂O₃ compositions, cubic ZrO₂ solid solution occurs.     

The System Si3N4-SiO2-Y2O3

Subsolidus phase relations were established in the system Si₃N₄-SiO₂-Y₂O₃. Four ternary compounds were confirmed, with compositions of Y₄Si₂O₇N₂, Y₂Si₃O₃N₄, YSiO₂N, and Y₁₀(SiO₄)₆N₂. The eutectic in the triangle Si₃N₄-Y₂Si₂O₇-Y₁₀(SiO₄)₆N₂ melts at 1500°C and that in the triangle Si₂N₂O-SiO₂-Y₂Si₂O₇ at 1550°C. The eutectic temperature of the Si₃N₄-Y₂Si₂O₇ join was ∼ 1520°C.     

Massive Transformation in the Y2O3-Bi2O3 System

Cubic solid solutions in the Y₂O₃-Bi₂O₃ system with ∼25% Y₂O₃ undergo a transformation to a rhombohedral phase when annealed at temperatures ≤ 700°C. This transformation is composition-invariant and is thermally activated, and the product phase can propagate across matrix grain boundaries, indicating that there is no special crystallo-graphic orientation relationship between the product and the parent phases. Based on these observations, it is proposed that cubic → rhombohedral phase transformation in the Y₂O₃-Bi₂O₃ system is a massive transformation. Samples of composition 25% Y₂O₃-75% Bi₂O₃ with and without aliovalent dopants were annealed at temperatures ≤ 700°C for up to 10000 h. ZrO₂ as a dopant suppressed while CaO and SrO as dopants enhanced the kinetics of phase transformation. The rate of cubic/rhombohedra1 interface migration (growth rate or interface velocity) was also similarly affected by the additions of dopants; ZrO₂ suppressed while CaO enhanced the growth rate. Diffusion studies further showed that ZrO₂ suppressed while CaO enhanced cation interdiffusion coefficient. These observations are rationalized on the premise that cation interstitials are more mobile compared to cation vacancies in cubic bismuth oxide. The maximum growth rate measured was ∼10⁻¹⁰ m/s, which is orders of magnitude smaller than typical growth rates measured in metallic alloys. This difference is explained in terms of substantially lower diffusion coefficients in these oxide systems compared to metallic alloys.