Synthesis and characterization of CeO2 supported ZSM-5 zeolite for organic dye degradation

Journal of Materials Science: Materials in Electronics - ZSM-5:CeO2 nanocomposites were prepared by two-step hydrothermal method in combination with the wet impregnation method. The synthesized...     

Improved dehydrogenation properties of surface-oxidized LiBH4@NiO nanostructure

Journal of Materials Science: Materials in Electronics - In this work, flower-like NiO was synthesized by facile hydrothermal method and LiBH4@NiO was prepared by simple wet ultrasonication method....     

Preparation and photocatalytic properties of nanocrystalline ZnWO4/TiO2

Journal of Materials Science: Materials in Electronics - In order to combine ZnWO4 and TiO2 to form a heterojunction, a sol–gel method combined with a hydrothermal method was used to...     

Ferroelectric phase transitions in PbHPO4-type crystals

Journal of Materials Science: Materials in Electronics - The statistical retarded double-time temperature-dependent Green’s function method and modified two sublattice pseudospin lattice...     

手工搬举作业的人因工程量化评估与改进研究

针对制造业生产过程中手工搬举作业的人因改善问题,研究了基于复合搬运指数的人因量化评估与改进方法。该方法针对实际搬运作业多任务构成的特点引入了复合搬运指数对其进行人因量化评估,通过复合搬举任务的选取及分析、复合搬举指标的计算、复合搬举任务的优化改进和基于人因仿真的改善方案多方位验证四个步骤可有效完成搬举作业的人因工程量化评估与改进。该方法在汽车公司车轮分装工序人因工程改进中的成功应用验证了其可行性和有效性。     

Sulphur doping induced band gap narrowing and enhancement of green emission in ZnO nanorods

Journal of Materials Science: Materials in Electronics - Sulphur doped ZnO nanostructures were synthesized by a cost-effective wet chemical method. Structural characterization indicated that the...     

Facile synthesis of multi-shelled AgI/ZnO composite as Z-scheme photocatalyst for efficient ciprofloxacin degradation and H2 production

Journal of Materials Science: Materials in Electronics - Overcoming defects through effective modification methods have become the main method for material performance optimization. In this paper,...     

Effect of different nanostructures of Cu2ZnSnS4 on visible light-driven photocatalytic degradation of organic pollutants

Journal of Materials Science: Materials in Electronics - Surface-modified hydrophilic CZTS nanostructures have been successfully synthesized through hot injection method followed by bi-phase ligand...     

NaLaMgWO6 microwave dielectric ceramics and their sub-6 GHz band microstrip patch antenna applications

Journal of Materials Science: Materials in Electronics - NaLaMgWO6 microwave dielectric ceramics have been synthesized via the standard solid-state reaction method. The Rietveld refinement of the...     

Facile synthesis of SnS nanostructures with different morphologies for supercapacitor and dye-sensitized solar cell applications

Journal of Materials Science: Materials in Electronics - In this paper, tin Sulfide (SnS) nanoparticles are synthesized with three different solvents through hydrothermal method and characterized...     

Superparamagnetic ZnFe2O4/ZnS nanocomposites with a highly recyclable for degradation of bisphenol A under visible-light

Journal of Materials Science: Materials in Electronics - Superparamagnetic ZnFe2O4/ZnS core–shell sub-microspheres were fabricated via a two-step forming method for recyclable photocatalytic...     

Enhanced magnetic properties of FeSiAl soft magnetic composites prepared by utilizing phosphate: PSA as insulating layer

Journal of Materials Science: Materials in Electronics - The phosphating treatment method has been extensively applied in the field of insulating soft magnetic powders because of its simplicity and...     

Ag-CuO/rGO/PVDF nanocomposite synthesized via simple method as a broadband non-linear optical material for optronic applications

Journal of Materials Science: Materials in Electronics - Ag-CuO/rGO nanoparticles were synthesized successfully using the low-cost co-precipitation method. The obtained nanoparticles were...     

Electrical and magnetic properties of epitaxial La1−xAgxMnO3 thin films prepared by a facile chemical solution deposition

Journal of Materials Science: Materials in Electronics - A facile chemical solution deposition method was used to prepare La1?xAgxMnO3 thin films with...     

Sintering behaviors,microstructure and dielectric properties of Ce0.5Nd0.5O1.75 ceramic at microwave frequencies

Journal of Materials Science: Materials in Electronics - A new temperature-stable Ce0.5Nd0.5O1.75 ceramics were synthesized by the conventional solid-state reaction method, and its sintering...     

Electrical characteristics and photosensing properties of Al/symmetrical CuPc/p-Si photodiodes

Journal of Materials Science: Materials in Electronics - In this study, the symmetrical copper-phthalocyanine (CuPc) was coated on p-Si wafer by spin-coating method. The photoresponse and...     

Optoelectronic properties of optimally grown ZnO nanorods

Journal of Materials Science: Materials in Electronics - Simple yet most reproducible method of dense, well-aligned, oriented and high crystalline quality zinc oxide nanorods (ZnO-NRs) is...     

New modeling of AgFeNi2S4-graphene-TiO2 ternary nanocomposite with chelate compounds and its photocatalytic reduction of CO2

Journal of Materials Science: Materials in Electronics - The most efficient method of converting CO2 to hydrocarbon fuels is a photocatalyst-based process, in which the efficient charge transfer...     

Studies on structural,spectral and morphological properties of co-precipitation derived Co-doped ZnO nanocapsules for NO2 sensing applications

Journal of Materials Science: Materials in Electronics - Pristine and Co-doped ZnO (CZ) nanocapsules (NCs) have been successfully prepared using a simple and cost-effective co-precipitation method....     

Enhancing mechanical properties via adding Ni and Zn in Cu/Sn3.5Ag/Cu transient liquid phase bonding for advanced electronic packaging

Journal of Materials Science: Materials in Electronics - Recently, the transient liquid phase (TLP) bonding process has become a promising method in advanced electronic packaging. Full...