Nitrogen-doped/carbon-coated 2D TiO2 Scaly clusters as high-performance anode for Lithium-ion batteries

Journal of Materials Science: Materials in Electronics - TiO2 has been considered as a promising anode material for lithium-ion batteries (LIBs) due to its low cost and high stability, but its low...     

Laser synthesis of hybrid Fe/Cr 2D structures based on their oxides for thermo-sensors with high sensitivity

Journal of Materials Science: Materials in Electronics - Semiconductors are considered promising materials for the fabrication of new thermo-sensors. The photons generated by a KrF laser source...     

The effect of post-deposition annealing on the chemical,structural and electrical properties of Al/ZrO2/La2O3/ZrO2/Al high-k nanolaminated MIM capacitors

Journal of Materials Science: Materials in Electronics - The metal-insulator-metal (MIM) is being used as the potential device in the research interest of modern materials for nanoelectronics...     

Multifunctional WSe2/SnSe2/WSe2 van der Waals heterostructures

Journal of Materials Science: Materials in Electronics - In this study, we report the fabrication of WSe2/SnSe2/WSe2 van der Waals (vdW) heterostructures for potential applications as tunnel...     

D.c. conductivity of amorphous CulnSe2 films

Journal of Materials Science Letters -     

Liquid-phase exfoliation of WSe2 nanosheets for ITO/WSe2 photodetector

Journal of Materials Science: Materials in Electronics - The potential application of atomically thin two-dimensional (2D)-layered WSe2 in future wearable electronics has sparked a lot of interest....     

Improved microwave dielectric properties of wolframite MgZrNb2O8 ceramics by (Ti1/2W1/2)5+ ionic co-substitution

Journal of Materials Science: Materials in Electronics - In this study, (Ti1/2W1/2)5+ ionic co-substitution effects on the crystal structural evolution, microstructure, and microwave dielectric...     

2D Real Microstructure Simulation Method for Metal Materials

Strength of Materials - The method of constructing a 2D simulation model based on the real microstructure is developed to simulate the microstructural evolution of materials. Microstructure...     

Preparation and microwave absorption characteristics of MoS2/Nd2O2CO3 composites

Journal of Materials Science: Materials in Electronics - The neodymium oxide carbonate (Nd2O2CO3) was prepared from neodymium hydroxide (Nd(OH)3) by hydrothermal and 550 °C heat treatment....     

Effect of B2O3 additive on the sintering temperature and microwave dielectric properties of Ba(Mg1/3Ta2/3)O3 ceramics

Journal of Materials Science: Materials in Electronics - This paper reported a research of the sinterability, microstructures, and microwave dielectric properties of Ba(Mg1/3Ta2/3)O3 (BMT) ceramics...     

Constructing BiOBr/g-C3N4/Bi2O2CO3 Z-scheme photocatalyst with enhanced photocatalytic activity

Journal of Materials Science: Materials in Electronics - In this work, the novel camellia-structured double Z-scheme BiOBr/g-C3N4/Bi2O2CO3 was simply prepared by a hydrothermal method. XRD, FTIR,...     

Effect of oxygen on the dielectric and energy storage performances of lead-free Bi2Mg2/3Nb4/3O7 thin films prepared by magnetron sputtering

Journal of Materials Science: Materials in Electronics - Bi2Mg2/3Nb4/3O7 (BMN) thin films are prepared on Pt–Si substrates by magnetron sputtering, the influence of oxygen on dielectric and...     

Synthesis of Ag@TiO2/NiFe2O4 ternary nanostructures and evaluation of their photocatalytic activities

Journal of Materials Science: Materials in Electronics - Synthesis and characterization of novel and ternary photocatalysts Ag@TiO2/NiFe2O4 for the three potential applications, such as...     

Developments of Multi-nanostitched 3D Carbon/epoxy Nanocomposites: Tensile/shear and Interlaminar Properties

Applied Composite Materials - Mechanical properties such as tensile, shear and interlaminar shear of multi-nanostitched three dimensional (3D) carbon/epoxy composites were studied. Introducing the...     

Photoelectrochemical characterization of the hetero-junction Ag/CuBi2O4 application under visible light irradiation

Journal of Materials Science: Materials in Electronics - The hetero-junction Ag/CuBi2O4 synthesized for the first time by sol gel method using citrate as chelating agent was characterized by X-ray...     

Influence of zirconium ions on the key characteristics of V2O5 nanorods and current–voltage features of the n-ZrxV2O5/p-Si photodetector

Journal of Materials Science: Materials in Electronics - This article reports microstructural, morphological, optical, and photoresponse characteristics of pure and zirconium-doped V2O5 nanorods...     

Enhanced dielectric properties of PVA/PEDOT:PSS/MnO2 based composites for electronic applications

Journal of Materials Science: Materials in Electronics - Polymer composite (PC) films comprising polyvinyl alcohol (PVA) and poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS)...     

Preparation and photocatalytic properties of nanocrystalline ZnWO4/TiO2

Journal of Materials Science: Materials in Electronics - In order to combine ZnWO4 and TiO2 to form a heterojunction, a sol–gel method combined with a hydrothermal method was used to...     

Quasi-solid-state dye-sensitized solar cells utilizing TiO2/graphite composite counter electrode and TiO2/N719 sensitizer photoelectrode for low-cost power generation

Journal of Materials Science: Materials in Electronics - Dye-sensitized solar cells (DSCs) have evolved through the highest devotion of the research community as a low-cost alternative for...     

Enhanced performance of FeOOH/ZnIn2S4/Au nanosheet arrays for visible light water splitting

Journal of Materials Science: Materials in Electronics - Carrier separation, charge transport, and visible light absorption are the main factors affecting the solar water splitting performance of a...