Optimal insertion of pilot symbols for transmissions over time-varying flat fading channels

Two major training techniques for wireless channels are time-division multiplexed (TDM) training and superimposed training. For the TDM schemes with regular periodic placements (RPPs), the closed-form expression for the steady-state minimum mean square error (MMSE) of the channel estimate is obtained as a function of placement for Gauss-Markov flat fading channels. We then show that among all periodic placements, the single pilot RPP scheme (RPP-1) minimizes the maximum steady-state channel MMSE. For binary phase-shift keying (BPSK) and quadrature phase-shift keying (QPSK) signaling, we further show that the optimal placement that minimizes the maximum uncoded bit error rate (BER) is also RPP-1. We next compare the MMSE and BER performance under the superimposed training scheme with those under the optimal TDM scheme. It is shown that while the RPP-1 scheme performs better at high SNR and for slowly varying channels, the superimposed scheme outperforms RPP-1 in the other regimes. This demonstrates the potential for using superimposed training in relatively fast time-varying environments.     

Bayesian generation of dependent erasures for frequency-hopcommunications and fading channels

The use of block coding and errors-and-erasures decoding can enhance performance in frequency-hop (FH) communication systems, provided that a good scheme is employed to determine which symbols to erase. The problem of making erasure decisions from collections of receiver outputs is investigated in this paper. Methods to determine which received symbols to erase are derived from Bayesian decision theory. Decision rules are developed for a system with M-ary orthogonal signaling, noncoherent demodulation, and frequency-selective fading. One result is a class of Bayesian schemes in which erasure decisions are made independently from symbol to symbol. Within this class is a rule that uses signal amplitude estimates for improved performance. A second result is a Bayesian technique in which erasure decisions are mutually dependent and are made collectively for each codeword. These techniques are analyzed and compared with the performance of receivers that use erasure techniques that require multiple applications of bounded distance decoding. The performance of the Bayesian techniques for dependent erasures are also compared with the performance of receivers that do not permit erasures. It is found that each of the Bayesian techniques offers substantial performance gains over errors-only decoding, and the dependent erasure scheme provides the best performance among the techniques of lower complexity     

Cross-Modulation Interference and Mitigation Technique for Ultrawideband PPM Signaling

The detection issues of ultrawideband (UWB) signals depend on the type of modulation scheme that is used during the transmission. Cross-modulation interference (CMI) is a problem that is specific to UWB pulse-position-modulation (PPM) signaling. In this paper, the effects of CMI on the performance of noncoherent UWB receivers are analyzed. The probabilities of error for transmitted-reference (TR) and energy detector (ED) receivers in the presence and absence of CMI are derived. Optimal and suboptimal CMI avoidance algorithms, which are based on novel acquisition techniques, are proposed for Rake receivers. The results show that the performance degradation in both receivers, which is due to the CMI effects, can be significant, depending on the modulation index. TR receivers still can be functional in the presence of CMI, and the target performance level determines the modulation index to be used. It is unlikely that effects of CMI on the performance of ED receivers in the presence of CMI are more severe relative to TR receivers, and the performance level is not acceptable. As a result, PPM signaling is not an appropriate modulation technique for ED receivers that are operating in the CMI region, unless CMI mitigation algorithms can be developed. Furthermore, the proposed optimal and suboptimal algorithms are two promising schemes for avoiding the CMI effects and, consequently, for improving the performance of Rake receivers operating in the CMI region.     

Comparison of downlink transmission strategies for distributed antenna systems with multi-antenna arrays

In multi-user distributed antenna systems(DAS),the scenario where each distributed antenna port is a multi-antenna array has not been comprehensively studied.In this article,four simple extended methods for downlink transmission are analyzed and compared in this scenario,two of which are based on the block diagonalization(BD) algorithm,namely joint BD and intra BD method.The other two methods are joint time division multiplexing(TDM) method and central antenna system(CAS) method.These four methods are evalu...     

Erasure insertion in frequency-hop communications with fading andpartial-band interference

The use of block coding and errors-and-erasures decoding can enhance performance substantially in frequency-hop communication systems, provided that a good scheme is employed to determine which symbols to erase. In this paper, methods for determining erasures derived from Bayesian decision theory are applied to the mitigation of fading and partial-band interference. The performance of receivers using the Bayesian technique is compared with that of receivers that make erasure decisions using Viterbi's (1982) ratio-threshold test. The performance of hard-decision demodulation and the theoretical performance of receivers with access to perfect side information are also compared. It is found that the Bayesian receiver provides the best performance, and that error probabilities for the Bayesian receiver are lower than those for hard-decision demodulation by as much as six orders of magnitude     

光纤局域网中一种新的光缓存器级联结构

采用光分路器级联光纤延迟线作为波分复用星形网的光接收机缓存可以提高网络的性能.光纤延迟线的个数影响网络的性能,它们之间级联的方式影响整个网络的性价比.对网络性能模拟的结果表明当光纤延迟线的个数增加到一定数量之后再继续增加,网络性能的提高很小.在此基础上,提出了一种新的光纤延迟线级联结构,这种结构具有无源、可模块化、高可靠性和高性价比的突出优点.     

Multidestination Protocols for Satellite Broadcast Channels

Two retransmission procedures, the go-back-N(GBN) scheme and the selective repeat (SR) scheme, have been analyzed for data transfer from one transmitter to many receivers. We consider transfer of error-controlled bulk data over a satellite broadcast channel. Two retransmission strategies, the dynamic retransmission group reduction (DRGR) technique and the fixed retransmission group (FRG) technique, are proposed. We study the GBN and SR schemes for both strategies. Analytic expressions are derived for the throughput performance of the GBN scheme and of the SR scheme with infinite resources, while discrete event simulation is used to estimate the throughput of the selective repeat scheme with finite resources. Only the SR scheme using the DRGR technique provides acceptable performance for high-speed bulk data transfer. For the DRGR technique, the throughput falls logarithmically with an increase in the number of receivers. In contrast, the throughput for the FRG technique falls exponentially with an increase in the number of receivers.     

New Relay Protocols with AMC Scheme for Throughput Enhancement in LTE-Advanced System

We propose an adaptive modulation and coding (AMC) scheme using relay protocols AF, DF and DMF. The AMC scheme is used for improving the throughput and reliability of a communication system, using different modulation and coding schemes. We analyze the performance of relay protocols with the AMC scheme and observe that relay protocols with the AMC scheme are capable of providing better average throughput at a lower signal to noise ratio (SNR) level as compared to the conventional scheme with no AMC. We perform Monte Carlo simulations based on 3GPP long term evolution-advanced parameters to prove the performance comparison of adaptive modulation and coding scheme (MCS) relay protocols with non-adaptive MCS relay protocols. The simulation results of the proposed system with adaptive MCS prove that among the amplify-and-forward (AF), decode-and-forward (DF) and de-modulate-and-forward (DMF), the DMF protocol performs best, at a lower SNR value and higher average throughput.     

Lightweight PIM—a new multicast routing protocol

Multicast holds out great promise to significantly reduce network load between the sender and a group of receivers by delivering a single data stream to many recipients. Protocol‐Independent Multicast (PIM) Sparse Mode and its variant PIM Source‐Specific Multicast (PIM SSM) are the most widely used IP multicast protocols. Protocols offer low latency data delivery capabilities with relatively high reliability and are characterized by large signaling overhead. This article presents a new multicast protocol, called Lightweight PIM (LPIM), tackling the main problem hindering widespread usage of IP multicast protocols, which is a large volume of signaling traffic. Given the existing usability of the PIM family protocols, a decision was made to base the new LPIM protocol on PIM SSM. The improvements used in LPIM lead to a considerable reduction of state data and signaling messages required by LPIM as compared with PIM SSM. Similar to its predecessor, LPIM is capable of handling large groups, although with significantly lower overhead. Copyright © 2012 John Wiley & Sons, Ltd.     

A fault‐tolerant energy‐efficient clustering protocol of a wireless sensor network

Energy efficiency in specific clustering protocols is highly desired in wireless sensor networks. Most existing clustering protocols periodically form clusters and statically assign cluster heads (CHs) and thus are not energy efficient. Every non‐CH node of these protocols sends data to the CH in every time slot of a frame allocated to them using the time division multiple access scheme, which is an energy‐consuming process. Moreover, these protocols do not provide any fault tolerance mechanism. Considering these limitations, we have proposed an efficient fault‐tolerant and energy‐efficient clustering protocol for a wireless sensor network. The performance of the proposed protocol was tested by means of a simulation and compared against the low energy adaptive clustering hierarchy and dynamic static clustering protocols. Simulation results showed that the fault‐tolerant and energy‐efficient clustering protocol has better performance than both the low energy adaptive clustering hierarchy and dynamic static clustering protocols in terms of energy efficiency and reliability. Copyright © 2012 John Wiley & Sons, Ltd.     

The probability of multiple correct packet receptions indirect-sequence spread-spectrum networks

We provide methods to evaluate the probabilities P(l, m-l|K), l=0, 1, ..., m and m⩽K of exactly l correct packet receptions in a group of m receivers, given that K packets are transmitted simultaneously from users employing direct-sequence spread spectrum (DS/SS) signalling schemes. This quantity is useful for the design and performance evaluation of protocols for admission control and dynamic code allocation in multiple-access spread spectrum packet radio networks intended for terrestrial or satellite applications. The evaluations are carried out for DS/SS networks employing BPSK modulation with coherent demodulation and convolutional codes with Viterbi decoding. Systems with geographically dispersed receivers and systems with colocated receivers are considered. Approximations based on the independent receiver operation assumption (IROA) and the Gaussian multivariate distribution are developed, and their accuracy is checked against the exact expressions derived for synchronous systems. The joint first error event approximation (JFEEA) is also developed for coded systems and compared to the IROA     

An All-Optical Access-Metro Interface for Hybrid WDM/TDM PON Based on OBS

A new all-optical access-metro network interface based on optical burst switching (OBS) is proposed. A hybrid wavelength-division multiplexing/time-division multiplexing (WDM/TDM) access architecture with reflective optical network units (ONUs), an arrayed-waveguide-grating outside plant, and a tunable laser stack at the optical line terminal (OLT) is presented as a solution for the passive optical network. By means of OBS and a dynamic bandwidth allocation (DBA) protocol, which polls the ONUs, the available access bandwidth is managed. All the network intelligence and costly equipment is located at the OLT, where the DBA module is centrally implemented, providing quality of service (QoS). To scale this access network, an optical cross connect (OXC) is then used to attain a large number of ONUs by the same OLT. The hybrid WDM/TDM structure is also extended toward the metropolitan area network (MAN) by introducing the concept of OBS multiplexer (OBS-M). The network element OBS-M bridges the MAN and access networks by offering all-optical cross connection, wavelength conversion, and data signaling. The proposed innovative OBS-M node yields a full optical data network, interfacing access and metro with a geographically distributed access control. The resulting novel access-metro architectures are nonblocking and, with an improved signaling, provide QoS, scalability, and very low latency. Finally, numerical analysis and simulations demonstrate the traffic performance of the proposed access scheme and all-optical access-metro interface and architectures     

Spatial and temporal adaptive receiver for DS-CDMA systems

The objective of this paper is to propose a reception scheme to improve the performance of DS-CDMA (Direct Sequence Code Division Multiple Access) systems, compared to conventional direct channel receivers. The technique employs a spatial and temporal adaptive receiver composed of N spatial processors (associated with M antennas) and N Decision Feedback Equalizers (DFE), both of which are trained using a TMDP (Time Multiplexed Dedicated Pilot) sequence. The spatial and temporal receiver associated with TMDP offers considerable benefits when compared to the conventional Rake-Finger receiver. Performance results and details of the functioning of the proposed reception scheme are presented.     

A dynamic resource allocation scheme for delay-constrained multimedia services in CDMA 1/spl times/EV-DV forward link

CDMA2000 1/spl times/EV-DV has been proposed as one of the global standards of third-generation (3G) networks, which adopts TDM/CDM and adaptive modulation and coding (AMC) techniques to enhance the data rate. The current CDMA2000 1/spl times/EV-DV standard specifies all possible combinations of system parameters, but there is no any further specification in the standard on how to dynamically change the system parameters to support the quality-of-service (QoS) requirements imposed by the upper-layer applications. In the meantime, one of the major deficiencies of previous research work done in this area is that they all are based on the channel models of physical layer such as Rayleigh model, which is unable to capture the link-layer QoS parameters such as queueing delay. Since the dynamic resource allocation usually resides in the data link layer, a wireless channel model at the link layer would be desirable to handle the QoS requirements. In this paper, we develop a dynamic resource allocation scheme using the effective capacity link model to support delay-bounded multimedia services in CDMA2000 1/spl times/EV-DV networks. Extensive simulations have been set up and the simulation results show that the proposed dynamic resource allocation scheme significantly improves the delay and throughput performance for all types of application traffic with various QoS requirements.     

Signaling Schemes for Distributed Connection Management in Wavelength-Routed Optical Mesh Networks

The next-generation optical transport network will evolve from point-to-point connectivity to mesh networking, which can provide fast and automatic provisioning with enhanced flexibility and survivability. Signaling is used to support connection setup, maintenance, and teardown in such a network. In this paper, we study the performance of two hop-by-hop and one parallel signaling schemes in wavelength-routed optical mesh networks. Based on the sequence between optical crossconnect (OXC) switching and signaling message processing, we classify hop-by-hop signaling into two types that comply with the requirements of GMPLS signaling protocols. These two types are forward before switching configuration (FBSC) and forward after switching configuration (FASC). Also, we propose a parallel signaling scheme that is different from the existing hop-by-hop GMPLS signaling protocols. Considering OXC architectures and traffic patterns, we compare the FBSC, FASC, and parallel signaling schemes using simulation experiments, in terms of network blocking probability and reservation time. The simulation data reveal that the performance of a signaling scheme depends on the nature of the signaling as well as the network setting (e.g., the OXC architecture and traffic pattern). We analyze reasons for this result and discuss tradeoffs between these signaling schemes. This work offers some insight into designing an efficient signaling protocol for wavelength-routed optical mesh networks.     

Comparison of Partial CSI Encoding Methods in Multi-User MIMO Systems

In this paper, we discuss different algorithms that can be used to encode channel state information (CSI) in realistic multi-user multiple-input multiple-output (MIMO) systems where there are only few users experiencing similar propagation conditions and the mobile user receivers do not necessarily have the same number of receive antennas. We divide systems with CSI encoding into four classes: time-division multiplexing (TDM) with and without linear pre-coding, and multiple user scheduling with and without linear pre-coding. The practical aspects such as system’s complexity and approaches for transmitting the CSI feedback and rate information from the mobile receivers to the base station are discussed and compared for different bit rates in the feedback link. We show that significant increases of the mean throughput of the multi-user scheduling systems demand much higher feedback link bit rates than TDM solutions. We also demonstrate that, while optimum, the non-linear pre-coding systems may introduce unacceptable degree of complexity into the base station design while linear pre-coding offers a very good trade-off between performance and complexity.     

AMRoute: Ad Hoc Multicast Routing Protocol

The Ad hoc Multicast Routing protocol (AMRoute) presents a novel approach for robust IP Multicast in mobile ad hoc networks by exploiting user-multicast trees and dynamic logical cores. It creates a bidirectional, shared tree for data distribution using only group senders and receivers as tree nodes. Unicast tunnels are used as tree links to connect neighbors on the user-multicast tree. Thus, AMRoute does not need to be supported by network nodes that are not interested/capable of multicast, and group state cost is incurred only by group senders and receivers. Also, the use of tunnels as tree links implies that tree structure does not need to change even in case of a dynamic network topology, which reduces the signaling traffic and packet loss. Thus AMRoute does not need to track network dynamics; the underlying unicast protocol is solely responsible for this function. AMRoute does not require a specific unicast routing protocol; therefore, it can operate seamlessly over separate domains with different unicast protocols. Certain tree nodes are designated by AMRoute as logical cores, and are responsible for initiating and managing the signaling component of AMRoute, such as detection of group members and tree setup. Logical cores differ significantly from those in CBT and PIM-SM, since they are not a central point for data distribution and can migrate dynamically among member nodes. Simulation results (using ns-2) demonstrate that AMRoute signaling traffic remains at relatively low level for typical group sizes. The results also indicate that group members receive a high proportion of data multicast by senders, even in the case of a highly dynamic network.     

突发通信中基于叠加训练的信道估计方案

针对无线突发通信中频带利用率低、信道参数获取困难等问题,提出了一种应用于突发通信的叠加训练信道估计与检测方案。该方案将信息和训练叠加发送,通过预失真发送信息符号使得训练与信息在频域正交,收端采用一阶统计信道估计和最大似然符号检测,并设计了抗直流干扰的信道估计方案。仿真表明,新方案在消除训练序列的频带开销的情况下获得了较好的信道估计和符号检测性能,与采用时分复用训练的方案相比,其有效吞吐率更优。