Two pyrazine derivatives as inhibitors of the cold rolled steel corrosion in hydrochloric acid solution

The inhibition effect of two pyrazine derivatives of 2-aminopyrazine (AP) and 2-amino-5-bromopyrazine (ABP) on the corrosion of cold rolled steel (CRS) in 1.0 M hydrochloric acid (HCl) was studied by weight loss, potentiodynamic polarization curves, and electrochemical impedance spectroscopy (EIS) methods. The results show that both AP and ABP are good inhibitors, and inhibition efficiency follows the order: ABP > AP. The adsorption of each inhibitor on CRS surface obeys Langmuir adsorption isotherm. Potentiodynamic polarization curves show that two pyrazine derivatives act as mixed-type inhibitors. EIS spectra exhibit one capacitive loop and confirm the inhibitive ability.     

Synergistic inhibition effect of 6-benzylaminopurine and iodide ion on the corrosion of cold rolled steel in H3PO4 solution

The synergistic inhibition effect of 6-benzylaminopurine (BAP) and iodide ion (I⁻) on the corrosion of cold rolled steel (CRS) in 1.0 M H₃PO₄ solution was studied by weight loss, potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) methods. The results show that BAP has a moderate inhibitive effect. However, incorporation of BAP with I⁻ improves the inhibition performance significantly. The adsorption of BAP in the absence and presence of I⁻ obeys Langmuir adsorption isotherm. BAP and BAP/I⁻ mixture act as mixed-type inhibitors. A probable synergism mechanism is proposed.     

Inhibition effect of 6-benzylaminopurine on the corrosion of cold rolled steel in H2SO4 solution

The inhibition effect of 6-benzylaminopurine (BAP) on the corrosion of cold rolled steel (CRS) in 1.0-7.0 M H₂SO₄ at 25-50 °C was studied by weight loss and potentiodynamic polarization methods. Fourier transform infrared spectroscopy (FTIR) and atomic force microscope (AFM) were used to characterize the CRS surface. The results showed that BAP was a good inhibitor in 1.0 M H₂SO₄, and the adsorption of BAP obeyed the Temkin adsorption isotherm. Polarization curves showed that BAP acted as a mixed-type inhibitor in sulfuric acid. Depending on the results, the inhibitive mechanism was proposed.     

Alizarin violet 3B as a novel corrosion inhibitor for steel in HCl, H2SO4 solutions

The inhibition effect of alizarin violet 3B (AV3B) on the corrosion of cold rolled steel (CRS) in 1.0 M HCl and 0.5 M H₂SO₄ solutions was investigated for the first time by weight loss, potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) methods. The results show that AV3B is a good inhibitor, and exhibits more efficient in 1.0 M HCl than 0.5 M H₂SO₄. The adsorption of AV3B on CRS surface obeys Langmuir adsorption isotherm in both acids. Polarization curves reveal that AV3B acts as a mixed-type inhibitor.     

Triazolyl blue tetrazolium bromide as a novel corrosion inhibitor for steel in HCl and H2SO4 solutions

The inhibition effect of triazolyl blue tetrazolium bromide (TBTB) on the corrosion of cold rolled steel (CRS) in 1.0 M HCl and 0.5 M H₂SO₄ solution was investigated for the first time by weight loss, potentiodynamic polarization curves, and electrochemical impedance spectroscopy (EIS) methods. The results show that TBTB is a very good inhibitor, and is more efficiency in 1.0 M HCl than 0.5 M H₂SO₄. The adsorption of TBTB on CRS surface obeys Langmuir adsorption isotherm. Polarization curves reveal that TBTB acts as a mixed-type inhibitor in both acids.     

Synergism between red tetrazolium and uracil on the corrosion of cold rolled steel in H2SO4 solution

The synergism between red tetrazolium (RT) and uracil (Ur) on the corrosion of cold rolled steel (CRS) in H₂SO₄ solution is first investigated by weight loss, potentiodynamic polarization, and atomic force microscope (AFM). Effects of inhibitor concentration (25-500 mg l⁻¹), temperature (20-50 °C), and acid concentration (1.0-5.0 M) on synergism are discussed systematically. The results reveal that RT has a moderate inhibitive effect, and its adsorption obeys the Freundlich adsorption isotherm. For Ur, it has a poor effect. However, incorporation of RT with Ur significantly improves the inhibition performance, and produces synergistic inhibition effect.     

A preliminary investigation of corrosion inhibition of mild steel in 0.5 M H2SO4 by 2-amino-5-(n-pyridyl)-1,3,4-thiadiazole: Polarization, EIS and molecular dynamics simulations

The efficiency, as steel corrosion inhibitors in 0.5 M H₂SO₄, of two thiadiazole derivatives, 2-amino-5-(3-pyridyl)-1,3,4-thiadiazole (3-APTD) and 2-amino-5-(4-pyridyl)-1,3,4-thiadiazole (4-APTD), was investigated by polarization and electrochemical impedance spectroscopy. The protection efficiency increases with increasing inhibitors concentration, but the temperature has hardly effect on the inhibition efficiency of APTD. The adsorption of APTD on iron surface obeys the Langmuir isotherm. The experimental results show that the inhibition efficiency of 4-APTD is higher than that of 3-APTD, and the molecular dynamics (MD) simulations show that the adsorption of 4-APTD on iron surface has the higher binding energy than that of 3-APTD.     

Synergistic inhibition effect of rare earth cerium(IV) ion and anionic surfactant on the corrosion of cold rolled steel in H2SO4 solution

The synergistic inhibition effect of rare earth cerium(IV) ion and anionic surfactant of sodium oleate (C₁₇H₃₃-COONa, SO) on the corrosion of cold rolled steel (CRS) in H₂SO₄ solution was first investigated by weight loss and potentiodynamic polarization methods. The results revealed that SO had a moderate inhibitive effect, and the adsorption of SO obeyed the Freundlich adsorption isotherm. For the cerium(IV) ion, it had a negligible effect. However, incorporation of Ce⁴⁺ with SO significantly improved the inhibition performance, and produced strong synergistic inhibition effect. Depending on the results, the synergism mechanism was proposed.     

Synergistic inhibition effect of rare earth cerium(IV) ion and 3,4-dihydroxybenzaldehye on the corrosion of cold rolled steel in H2SO4 solution

The synergistic inhibition effect of rare earth cerium(IV) ion and 3,4-dihydroxybenzaldehye (DHBA) on corrosion of cold rolled steel (CRS) in H₂SO₄ solution was first investigated by weight loss and potentiodynamic polarization methods. Effects of inhibitor concentration, temperature, immersion time and acid concentration on synergism are discussed in detail. The results reveal that DHBA has moderate inhibitive effect and its adsorption obeys Temkin adsorption isotherm. For the cerium(IV) ion, it has negligible effect. However, incorporation of Ce⁴⁺ with DHBA improves the inhibition performance significantly, and produces strong synergistic inhibition effect.     

Application of some ferrocene derivatives in the field of corrosion inhibition

Three ferrocene derivatives, namely 1,1′-diacetylferrocene (Diacetyl Fc), 1,1′-diformylferrocene (Diformyl Fc) and 2-benzimidazolythioacetylferrocene (BIM Fc) were synthesized and their inhibitive effects against mild steel corrosion in aerated 0.5 M H₂SO₄ and 1 M HCl solutions were evaluated. Corrosion measurements based on polarization resistance (R_p), potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) indicate that Diacetyl Fc, in most cases, accelerates mild steel corrosion in HCl while Diformyl Fc and BIM Fc act as weak inhibitors. In H₂SO₄ solution, ferrocene derivatives show good inhibition performance. The efficiency of the inhibitors follows the order: BIM Fc > Diformyl Fc ? Diacetyl Fc. Adsorption of both Diacetyl Fc and Diformyl Fc obey Langmuir adsorption isotherm with very low value of free energy of adsorption ΔG^° for the Diformyl Fc (physisorption) while adsorption of BIM Fc follows that of Frumkin with high negative value of ΔG^° (chemisorption). Both Diformyl Fc and BIM Fc act as mixed-type inhibitors with predominant effect on the anodic dissolution of iron. Analysis of the polarization curves and impedance spectra indicates that charge transfer process mainly controls mild steel corrosion in H₂SO₄ solution without and with ferrocene compounds. The mechanism of corrosion inhibition or acceleration by ferrocene derivatives was discussed in the light of the molecular structure of the additives.     

Adsorption and inhibitive properties of some new Mannich bases of Isatin derivatives on corrosion of mild steel in acidic media

Adsorption of four derivatives of piperidinylmethylindoline-2-one on mild steel surface in 1 M HCl solution and its corrosion inhibition properties has been studied by a series of techniques, such as polarization, electrochemical impedance spectroscopy (EIS), weight loss and quantum chemical calculation methods. The values of activation energy (E_a) for mild steel corrosion and various thermodynamic parameters were calculated and discussed. Potentiodynamic polarization measurements showed that all inhibitors are mixed type. The degree of surface coverage was determined by using weight loss measurements and it was found that adsorption process of studied inhibitors on mild steel surface obeys Langmuir adsorption isotherm.     

Nitrotetrazolium blue chloride as a novel corrosion inhibitor of steel in sulfuric acid solution

The inhibition effect of nitrotetrazolium blue chloride (NTBC) on the corrosion of cold rolled steel (CRS) in 0.5 M H₂SO₄ was investigated by weight loss, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) methods. The results show that NTBC is a good inhibitor, and the adsorption of NTBC on CRS surface obeys Langmuir adsorption isotherm. Polarization curves show that NTBC acts as a mixed-type inhibitor. EIS spectra consist of large capacitive loop at high frequencies followed by a small inductive one at low frequency values, and charge transfer resistance increases with the inhibitor concentration.     

Thermodynamic, electrochemical and quantum chemical investigation of some Schiff bases as corrosion inhibitors for mild steel in hydrochloric acid solutions

The corrosion inhibition of mild steel in 1.0 M HCl solution by four Schiff bases was investigated using weight loss and electrochemical measurements and quantum chemical calculations. All compounds showed >90% inhibition efficiency at their optimum concentrations. The activation energy (E_a) of corrosion and other thermodynamic parameters were calculated to elaborate the mechanism of corrosion inhibition. The adsorption of the inhibitors on the mild steel surface follows Langmuir isotherm model. Polarization studies indicated that all studied inhibitors are mixed type. The computed quantum chemical properties viz., electron affinity (EA) and molecular band gap (ΔE_MBG) show good correlation with experimental inhibition efficiencies.     

Corrosion inhibition of carbon steel in tetra-n-butylammonium bromide aqueous solution by benzotriazole and Na3PO4

The corrosion inhibition behavior of benzotriazole, Na₃PO₄ and their mixture on carbon steel in 20 wt.% (0.628 mol l⁻¹) tetra-n-butylammonium bromide aerated aqueous solution was investigated by weight-loss test, potentiodynamic polarization measurement, electrochemical impedance spectroscopy and scanning electron microscope/energy dispersive X-ray techniques. The inhibition action of BTA or SP or inhibitors mixture on the corrosion of carbon steel is mainly due to the inhibition of anodic process of corrosion. The results revealed that inhibitors mixtures have shown synergistic effects at lower concentration of inhibitors. At 2 g l⁻¹ BTA and 2 g l⁻¹ SP showed optimum enhanced inhibition compared with their individual effects.     

Hydroxymethyl urea and 1,3-bis(hydroxymethyl) urea as corrosion inhibitors for steel in HCl solution

The inhibition effect of two urea derivatives of hydroxymethyl urea (HMU) and 1,3-bis(hydroxymethyl) urea (BHMU) on the corrosion of cold rolled steel (CRS) in 1.0 M HCl solution was studied by weight loss, potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS), quantum chemical calculation and molecular dynamics (MD) simulation methods. Inhibition efficiency values of 20.0 mM HMU and BHMU are higher than 80% and 85% at 20–50 °C, respectively. The adsorption of each inhibitor on steel surface obeys Langmuir adsorption isotherm, and is mainly the chemical adsorption. Inhibition efficiency follows the order: BHMU > HMU.     

Sodium molybdate as a corrosion inhibitor for aluminium in H3PO4 solution

The inhibition effect of sodium molybdate (Na₂MoO₄) on the corrosion of aluminium in 1.0 M H₃PO₄ solution was studied by weight loss, potentiodynamic polarisation curves and electrochemical impedance spectroscopy (EIS) methods. The results show that Na₂MoO₄ is a good inhibitor, and the inhibition efficiency obtained by three methods is higher than 84% at 20 mM. The adsorption of Na₂MoO₄ obeys Freundlich isotherm at lower concentrations (1–7 mM), while Langmuir isotherm at higher concentrations (7–20 mM). Polarisation curves indicate that Na₂MoO₄ acts as an anodic inhibitor. EIS spectra exhibit three loops (two capacitive loops and one inductive loop).     

Sodium tungstate as a corrosion inhibitor of cold rolled steel in peracetic acid solution

Sodium tungstate (Na₂WO₄) as a corrosion inhibitor of cold rolled steel (CRS) in peracetic acid (PAA) solution was investigated by weight loss, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS). All the data obtained from the experiments indicate that Na₂WO₄ is capable of inhibiting the corrosion of CRS in PAA solution. Polarization data show that Na₂WO₄ behaves as an anodic type inhibitor in PAA solution. Adsorption of Na₂WO₄ is found to follow the Temkin adsorption isotherm. The calculated free energy of adsorption (ΔG_ads) probably indicates that both physical adsorption and chemical adsorption may take place in the adsorption process.     

Synergistic inhibition behaviour of methylbenzyl quaternary imidazoline derivative and iodide ions on mild steel in H2SO4 solutions

The inhibition behaviour of 2-undecyl-1-ethylamino-1-methylbenzyl quaternary imidazoline (2UMQI) and KI on mild steel in 1.0 M H₂SO₄ solutions was investigated at 25 °C using electrochemical methods. The results indicated that 2UMQI inhibited the corrosion of mild steel and the extent of inhibition increased with 2UMQI concentrations. The inhibition action in the presence of 2UMQI is due to physical adsorption of 2UMQI. A mixed-inhibition mechanism is proposed for the inhibitive effects of 2UMQI. Inhibition efficiency of 2UMQI was enhanced by the addition of iodide ions. In the presence of KI, the potentials of unpolarization, E_u was observed and increased with KI concentration.     

Corrosion and corrosion control of mild steel in concentrated H2SO4 solutions by a newly synthesized glycine derivative

A newly synthesized glycine derivative (GlyD1), 2-(4-(dimethylamino)benzylamino)acetic acid hydrochloride, was used to control mild steel corrosion in 4.0 M H₂SO₄ solutions at different temperatures (278–338 K). Tafel extrapolation, linear polarization resistance (LPR) and impedance methods were used to test corrosion inhibitor efficiency. An independent method of chemical analysis, namely ICP-AES (inductively coupled plasma atomic emission spectrometry) was also used to test validity of corrosion rate measured by Tafel extrapolation method. Results obtained were compared with an available glycine derivative (GlyD2) and glycine (Gly). Tafel polarization measurements revealed that the three tested inhibitors function as mixed-type compounds. The inhibition efficiency increased with increase in inhibitor concentration and decreased with temperature, suggesting the occurrence of physical adsorption. The adsorptive behaviour of the three inhibitors followed Temkin-type isotherm and the standard free energy changes of adsorption () were evaluated for the three tested inhibitors as a function of temperature. The inhibition performance of GlyD1 was much better than those of GlyD2 and Gly itself. Results obtained from the different corrosion evaluation techniques were in good agreement.     

Benzimidazole and its derivatives as corrosion inhibitors for mild steel in 1M HCl solution

In this paper, the inhibition ability of benzimidazole and its derivatives against the corrosion of mild steel in 1M HCl solution was studied. The change of impedance parameters observed by variation of inhibitors concentration within the range of 50-250 ppm was an indication of their adsorption. The thermodynamic adsorption parameters proposed that these inhibitors retard both cathodic and anodic processes through physical adsorption and blocking the active corrosion sites. The adsorption of these compounds obeyed the Langmuir’s adsorption isotherm. The inhibition efficiency was increased with inhibitor concentration in the order of 2-mercaptobenzimidazole > 2-methylbenzimidazole > benzimidazole, which is in accordance with the variation of apparent activation energy of corrosion.