Quantitative high-resolution13C and1H nuclear magnetic resonance of ω3 fatty acids from white muscle of atlantic salmon (Salmo salar)

High-resolution¹³C nuclear magnetic resonance (NMR) spectra have been obtained and used to define the ω3 (n-3) fatty acid distribution in lipid extract and white muscle from Atlantic salmon (Salmo salar). The¹³C spectrum of lipid extracted from muscle gives quantitative information about the individual n-3 fatty acids, 18:2n-6, 20:1/22:1 and groups of fatty acids. The quantitative data compare favorably with those obtained by gas-liquid chromatography. The¹H NMR spectrum of the lipid extract gives information about the amount of 22:6n-3 and the total content of n-3 fatty acids. The¹³C NMR technique also revealed the positional distribution (1,3- and 2-acyl) of the important 20:5n-3 and 22:6n-3 acids in the triacylglycerol molecules. In the quantitative¹³C NMR spectrum of white muscle, the methyl region of the acyl chains of triacylglycerols gave rise to sufficiently resolved signals to permit estimation of the total concentration of lipids and the n-3 fatty acid content. The NMR data are in good agreement with corresponding data obtained by traditional methods.     

Quantitative high resolution13C nuclear magnetic resonance of the olefinic and carbonyl carbons of edible vegetable oils

The acyl distribution and acyl positional distribution (1,3-acyl and 2-acyl) of triacylglycerols derived from edible vegetable oils has been examined by¹³C nuclear magnetic resonance (NMR) spectroscopy. The acyl profile of three natural oils (corn, peanut, canola) and one specialty oil (high oleic sunflower oil, Trisun^® 80) has been defined from the high resolution (medium field 75.4 MHz) spectrum of the carbonyl and olefinic regions. The quantitative integrity of the NMR derived acyl profile is substantiated by gas chromatographic (GC) analysis. The positional distribution data of the three natural oils indicates that polyunsaturates are replaced in the 1,3-glycerol position exclusively by saturates, while the oley distribution remains, for the most part, randomly distributed. The same is not true for Trisun^® 80, which shows a more random distribution of the linoleyl groups as well.     

Investigation of the structure of poly(vinyl alcohol)-iodine complex hydrogels prepared from the concentrated polymer solutions

The structure and dynamics of poly(vinyl alcohol) (PVA)-iodine complex hydrogels that were prepared from concentrated PVA solutions have been characterized by high-resolution solid-state ¹³C NMR spectroscopy. The fully relaxed dipolar decoupling (DD)/MAS ¹³C NMR spectrum indicates that the hydrogels contain at least two components, a highly mobile and broader components. The former is assigned to the soluble or well water-swollen PVA chains that are not closely associated with the PVA-iodine complexes, whereas the latter may be mainly ascribed to the aggregated PVA chains that are produced by the formation of the PVA-iodine complexes because no diffraction peaks due to the conventional PVA crystallites are observed by wide-angle X-ray diffractometry. Furthermore, ¹³C spin-lattice relaxation time (T_1C) analyses reveal that the broader component is composed of the highly restricted component probably assignable to PVA molecular chain aggregates containing the PVA-iodine complexes and the less mobile component. As for the former component, their CH resonance line measured by the T_1C-filtering method is successfully resolved into 7 constituent lines by the least-squares curve fitting. The statistical analysis of the integrated intensities of the constituent lines thus obtained also reveals that the probability f_a for the formation of intramolecular hydrogen bonding in the successive two OH groups along each chain and another probability f_t of the trans conformation are, respectively, as high as 0.86 and 0.88. This fact indicates that the PVA molecular chain aggregates containing the PVA-iodine complexes should be composed of PVA segments with the trans-rich conformation and the PVA-iodine complexes therein may also be formed with these several trans-rich segments surrounding the rod-like polyiodine cores in agreement with the so-called aggregation model. Moreover, several new diffraction peaks that should be interpreted in terms of the hexagonal structure are observed for the PVA-iodine complex hydrogels in the low 2θ region in the wide-angle X-ray diffraction (WAXD) profile measured by a strong X-ray source at SPring-8. This suggests the necessity of more detailed WAXD characterization to propose a new structure model, which should be referred to as the hexagonal aggregation model, for the PVA-iodine complexes.     

Quantitative triacylglycerol analysis of whole vegetable seeds by1H and13C magic angle sample spinning NMR spectroscopy

High-resolution¹³C and¹H magic angle sample spinning nuclear magnetic resonance (NMR) spectra have been obtained and used to define the relative unsaturated acyl distribution of triacylglycerols in whole oil seeds. Inverse gated proton decoupled¹³C and¹H NMR spectra permit the quantitative analysis of seeds containing simple oils,e.g., sunflower seeds containing oleyl and linoleyl unsaturates only. More sensitive¹³C NMR techniques are necessary for the analysis of specific seed classes. One such class is the rapeseed, which is especially difficult due to its low oil content (≈ 2 mg oil/seed) and complex unsaturated acyl profile of oleyl, linoleyl, linolenyl, erucyl, and eicosenoyl. The Distortionless Enhancement by Polarization Transfer technique significantly improves sensitivity to the extent that single rapeseeds can be examined within an hour of acquisition time. Furthermore, some positional (1,3- or 2-glycerol attachment) groups can be identified leading to a partial estimation of the 1,3-, 2-acyl distribution.     

Applicability of natural abundance S solid-state NMR to cement chemistry

With the development of high-magnetic field spectrometers, ³³S solid-state NMR is now clearly feasible but remains complex, especially considering the low sensitivity of ³³S NMR. This communication briefly explores the potential of ³³S NMR in the field of cement chemistry. Based on a few significant examples such as the one of ettringite, whose sulfur NMR spectrum is reported here for the first time, it appears that ³³S solid-state NMR might be able to distinguish between the sulphates present in a cement paste taking advantage of both the chemical shift and the quadrupolar interaction.     

NMR determination of crystallinity for poly(?-l-lysine)

Crystallinity of poly(?-l-lysine) (?-PL) was discussed by analyzing the differences in the ¹H spin-spin relaxation times (T₂^H), the ¹³C spin-lattice relaxation times (T₁^C), and the ¹³C NMR signal shapes between the crystalline and the non-crystalline phases. The observed ¹H relaxation curve (free induction decay followed by solid-echo method) showed the sum of Gaussian and exponential decays. Similarly, the observed ¹³C relaxation curves obtained from the Torchia method were double-exponential. The ¹³C NMR spectrum of ?-PL was divided into the narrow and the broad lines by utilizing the intrinsic differences in the ¹H spin-lattice relaxation times in the rotating-frame between them, which are attributed to the crystalline and the non-crystalline phases, respectively. Even though the crystallinity is obtained from the identical NMR measurements, the estimated values are different with each other. The crystallinity estimated from the T₂^H differences was 75.8 ± 0.1% at 333 K and 60.7 ± 0.4% at 353 K. From the T₁^C differences, the value was estimated to be 62 ± 11%. Furthermore, the value estimated from the NMR signal separation was 54 ± 5%. In this study we have explained these discrepancies by the difference in susceptibility among the experiments for the inter-phase, which exists in-between the crystalline and the amorphous phases. Furthermore, the estimated crystallinity was ascertained by the X-ray diffraction experiment.     

129Xe NMR study of 12-tungstophosphoric heteropoly acid supported on silica

The structure of 12-tungstophosphoric heteropoly acid (H₃PW₁₂O₄₀) supported on silica has been studied by¹²⁹Xe NMR of adsorbed xenon. The¹²⁹Xe NMR spectra are found to depend on the surface HPA concentration. The¹²⁹Xe NMR data provide evidence for the presence of an organized microporous structure within HPA overlayers. These results are in agreement with nitrogen adsorption and capillary condensation (77 K) measurements. The high sensitivity of the¹²⁹Xe NMR method and its applicability for testing of silica-based HPA catalysts are demonstrated.A preliminary report of this work was presented to the Second European Congress on Catalysis EUROPACAT-II, Maastricht, The Netherlands, 3–8 September 1995.Deceased.     

Niobium oxide acidity studied by proton broad-line NMR at 4 K and MAS NMR at room temperature

The quantitative study of the Brønsted acidity of niobic acid (Nb₂O₅·xH₂O) using broad-line¹H NMR at 4 K has been performed by interacting niobic acid, pretreated at 573 K under vacuum, with water molecules. The number of oxyprotonated species (H₃O⁺ and H₂O...HO species formed, unreacted acidic OH groups or excess H₂O molecules) deduced from the simulations of the broad-line¹H NMR spectra shows a continuous increase in the number of H₃O⁺ species with adsorbed water molecules. This increase may be due to a classical dilution effect or to a synergistic interaction between Brønsted and Lewis acid sites. These results are compared with those of some HY zeolites with or without framework defects.     

Changes upon heating of the distribution of Al,P and Si atoms in the SAPO-37 molecular sieve

A drastic change in the environment of Si atoms in SAPO-37 after heating at 1173 K is seen in the²⁹Si MAS NMR spectrum. This suggests a modification of the location of Si, Al and P atoms. Three main phases would coexist in large amounts in the faujasite structure, the SAPO-37 originating phase, pure SiO₄ islands and an aluminosilicate phase comparable to Si-Al faujasite.     

Solid-state nuclear magnetic resonance investigation of cation siting in LiNaLSX zeolites

The location of Li⁺ and Na⁺ cations in a series of dehydrated low-silica LiNaX zeolites (LiNaLSX, framework Si/Al ratio=1.0) were characterized by ⁷Li and ²³Na magic-angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. Depending on the Li⁺ content, up to three lines were observed in the ⁷Li MAS NMR spectra attributed to Li⁺ cations on SI′, SII and SIII sites. The ²³Na MAS NMR spectra of the pure sodium form NaLSX and of LiNaLSX samples with low Li⁺ contents contain up to five lines belong to Na⁺ cations located on SI, SI′, SII, and two different SIII′ sites. LiNaLSX zeolites containing more than 40% of Li⁺ show only a single narrow line in the ²³Na MAS NMR spectra attributed to mobile sodium cations. The populations of the different cation sites were determined from the relative line intensities of the MAS NMR spectra. Below about 70% Li⁺ exchange, lithium cations are located only on sites SI′ and SII. Between 70% and 100% Li⁺ content these sites are fully occupied by Li⁺, and the population of site SIII by Li⁺ increases. It was found that the nitrogen-adsorption capacity correlates well with the occupation of Li⁺ at site SIII.     

Use of 13C nuclear magnetic resonance distortionless enhancement by polarization transfer pulse sequence and multivariate analysis to discriminate olive oil cultivars

Distortionless enhancement by polarization transfer (DEPT) pulse sequence was used to set up a quantitative high-resolution ¹³C nuclear magnetic resonance (NMR) method to discriminate olive oils by cultivars and geographical origin. DEPT pulse sequence enhances the intensity of NMR signals from nuclei of low magnetogyric ratio. The nuclear spin polarization is transferred from spins with large Boltzmann population differences (usually protons) to nuclear species characterized by low Boltzmann factors, e.g., ¹³C. The signal enhancement of ¹³C spectra ensures the accuracy of resonance integration, which is a major task when the resonance intensities of different spectra must be compared. The resonances of triglyceride acyl chains C _n:0, C_18:1, C_18:2, and C_18:3, were also assigned. Multivariate analysis was carried out on the 35 carbon signals obtained. By using variable reduction techniques, coupled with standard statistical methods—partial least squares and principal components analysis—it was largely possible to separate the samples according to their variety and region of origin. With one problem variety removed, 100% prediction of the three remaining varieties was achieved. Similarly, by using the three regions with greatest representation in the data, all but one of a test set of 34 samples were correctly predicted. Thus, the composition of olive oils from different cultivars and of different geographical origin were compared and successfully studied by multivariate analysis. These considerations in conjunction with the structural elucidations of triglyceride molecules demonstrated that ¹³C NMR is among the most powerful techniques yet described for analysis of olive oils.     

Isomerization of α-pinene over dealuminated ferrierite-type zeolites

Isomerization of α-pinene was performed on a series of dealuminated ferrierite (FER)-type zeolites in liquid phase at 363 K using a batch reactor. The course of zeolite dealumination was followed in detail using ²⁹Si, ²⁷Al, ¹H MAS NMR, XRD, FTIR, and sorption of nitrogen. The ammonium form of FER was dealuminated with aqueous solutions of HCl. While retaining the crystallinity of the zeolite particles, the treatments removed up to 53% of the tetrahedrally coordinated aluminum atoms from the FER framework. According to ²⁹Si MAS NMR studies, the framework aluminum atoms located at the 10-membered rings in the main channels of FER (T_B sites) were depleted preferentially from their positions. Even relatively mild dealumination of FER led to an active catalyst containing both Brønsted and Lewis centers, yielding up to 97% conversion of α-pinene at 363 K, in contrast to the 72% observed for the parent hydrogen form. Such catalytic behavior was discussed in terms of the conversion of a reactant inside micropores of the zeolite catalyst, on Brønsted acid centers with enhanced strength located probably in the vicinity of Lewis sites. The selectivity toward camphene and limonene changed smoothly with the dealumination level; thus, a higher selectivity toward limonene was observed at the expense of camphene formation with increasing the n_Si/n_Al ratio of the catalysts. The selectivity toward camphene and limonene was close to 85% for all of the materials studied. The initial rates of α-pinene transformations over FER-type materials exceeded those observed for other catalytic systems, heteropoly acid/SiO₂ and H₂SO₄/ZrO₂. This study demonstrates the successful application of a medium-pore zeolite for the catalytic transformation of α-pinene in liquid phase.     

Solid-state nuclear magnetic resonance (NMR): Application to precursors of ceramics—Polycarbosilane

The chemical structures of oxidation- and electron irradiation-cured polycarbosilane fibers has been studied by IR and chemical analysis, but its structure has not been identified in detail. In this work, the chemical structure and curing mechanism was examined by solid-state high-resolution NMR spectroscopy. From the analysis of NMR spectra, it is explained that (i) in oxidation curing of PCS fibers, oxygen attacks first the SiC₃H bond and forms the SiC₃O bond and, next, the SiC₄ backbone bond and forms the SiC₂O₂ units; (ii) in electron irradiation curing, the signal intensity of SiC₃H units decreases with the increase in dose, the increase in the signal being due to the formation of SiC₄ units; (iii) solid-state²⁹Si high-resolution (CP/MAS) NMR spectroscopy is a powerful tool for investigating the chemical structure and curing mechanism of PCS fibers complementing infrared and solid-state¹³C high-resolution NMR spectroscopy; and (iv)¹H CRAMPS NMR spectroscopy is very useful for investigating the chemical structure and curing mechanism of PCS fibers.     

31P nuclear magnetic resonance studies on alkyl phosphate emulsifiers in cosmetic oil-in-water emulsions

Cosmetic oil-in-water emulsions with a stearyl phosphate emulsifier are examined by means of static and dynamic ³¹P nuclear magnetic resonance (NMR) techniques to characterize the molecular properties of the emulsifier in situ. The interfacially bound emulsifier can be deteced by high-resolution NMR spectroscopy, whereas the excess emulsifier exists as a solid lipid phase not detectable by this technique. The emulsions and the emulsifier raw material, consisting of monostearyl phosphate as well as distearly phosphate, are examined by solid state cross polarization magic angle spinning NMR spectroscopy to prove the existence of solid emulsifier phases in the emulsions. By applying dynamic ³¹P NMR methods to the interfacially bound emulsifier, information about the molecular dynamics at the interface is obtained. The results of the T ₁ and T ₂ relaxation time measurements indicate a restricted motion of the molecules that is dependent on the oil droplet size in the emulsions. This is verified by ³¹P NMR pulsed gradient spin echo self-diffusion measurements on emulsions with different droplet sizes. Only about 5 wt% of the total emulsifier used is bound at the interface; the excess forms solid lipid phases. The coverage of the interface seems to be independent of the emulsifier concentration. Only the monoester of the emulsifier raw material shows interfacial activity. Its mobility indicates the two-dimensional environment of the molecules on the surface of the oil droplets.     

Proton NMR studies on concentrated aqueous sulfuric acid solutions and Nafion-H

Sulfuric acid containing limited amounts of water, H₂SO_4.nH₂O with 0.23≤n≤4, has been studied by ¹H broad-line NMR at 4 K and MAS NMR at room temperature. The broad-line NMR spectra indicate the formation of H₃O⁺ and HSO₄ ^- ions. H₂SO_4.2H₂O is correctly written as H₃O⁺HSO₄ ^-.H₂O. The results are compared with the Nafion- H/water system. This revised version was published online in July 2006 with corrections to the Cover Date.     

A novel method for determination of polyester end-groups by NMR spectroscopy

An efficient, convenient and quantitative method for characterising polyester end-groups is described. We have found that trichloroacetyl isocyanate (TAI) reacts rapidly and quantitatively with both carboxyl [C(O)OH] and hydroxyl (OH) chain ends to form derivatives that can be readily determined by ¹H NMR spectroscopy. The TAI capped end-groups give rise to characteristic imidic NH resonances in a normally clear region of the ¹H NMR spectrum [δ∼10-11.5 for C(O)-O-C(O)-NH-C(O)CCl₃ from C(O)OH, δ∼8-9 for O-C(O)-NH-C(O)CCl₃ from OH]. The method has been successfully applied to quantitative determination of the end-groups of a wide variety of oligomeric polyesters. It has also been applied to higher molecular weight polyesters including commercial, bottle grade, poly(ethylene terephthalate) (PET) and PET based copolyesters (e.g. PETG).     

Interactions between fullerene(C60) and poly(ethylene oxide) in their complexes as revealed by high-resolution solid-state C NMR spectroscopy

A series of poly(ethylene oxide) (PEO)/fullerene(C₆₀) complexes are prepared by lyophilization. The intermolecular interaction and molecular motion in the complex are investigated by solid-state ¹³C NMR spectroscopy. An intense C₆₀ signal due to the intermolecular cross-polarization is observed in the ¹³C CP/MAS spectra of the complex samples, indicating a high degree of dispersion of C₆₀s in the complexes. By measuring the ¹³C spin-lattice relaxation times and ¹H transverse relaxation times of the complex sample and by comparing the static ¹³C spectrum of the pure C₆₀ sample with that of the complex sample, it is demonstrated that there exist n-π interactions between the n-orbitals of the PEO ether oxygen and the π-system of C₆₀. The C₆₀ molecules act as physical cross-links in the amorphous region of PEO, which greatly inhibit the mobility of the surrounding PEO chains, while the rapid isotropic rotation of C₆₀ molecules is also reduced to some extent due to the interactions with the polymer chains.     

High lithium conductivities in weakly-ionophilic low-dimensional block copolymer electrolytes

The structure of amphiphilic low-dimensional copolymer electrolytes I of similar overall composition but prepared by different synthetic procedures X and Y are described. I are copolymers of poly[2,5,8,11,14-pentaoxapentadecamethylene(5-alkyloxy-1,3-phenylene)] (CmO5) and poly[2,-oxatrimethylene(5-alkyloxy-1,3-phenylene)] (CmO1) where the alkyl side chains having m carbons are hexadecyl or mixed dodecyl/octadecyl (50/50). ¹H NMR shows that the copolymers have 50% (m = 16) or only 18 and 13% of CmO5 units and DSC indicates that the copolymers have ‘block’ sequencing of CmO1 and CmO5 segments. Molecular dynamics modelling indicates that in CmO5 Li⁺ and BF₄⁻ ions are separated by Li⁺ encapsulation in tetraethoxy segments but in ionophobic CmO1 units the salt is mostly present as neutral aggregates decoupled from the polymer. Conductivities of these microphase-separated mixtures with salt-bridge amphiphilic polyethers II and III of each system are similar. They have low temperature dependence over the range 20 °C to 110 °C at ∼10⁻³ S cm⁻¹. ⁷Li NMR linewidth measurements confirm high lithium mobilities at −20 °C. A conduction mechanism is proposed whereby Li⁺ hopping takes place along rows of decoupled aggregates (dimers/quadrupoles) within an essentially block copolymer structure. Subambient measurements to −10 °C gave a conductivity of 4 × 10⁻⁵ S cm⁻¹.     

Comparison of (non)-sulfided NiNaY zeolite catalysts prepared by ion-exchange and impregnation by xenon adsorption and129Xe NMR

Ni²⁺ exchanged and NiCl₂ impregnated non-sulfided and sulfided NaY zeolites were characterized by xenon adsorption isotherms,¹²⁹ Xe NMR and thiophene hydrodesulfurization. The nickel species are located mainly inside the micropores of the zeolites in all samples. Ion-exchange results in a more homogeneous distribution of these species than impregnation. This explains their lower hydrodesulfurization activity compared to the ion-exchanged samples.On leave of absence from the Institute of Isotopes, Budapest, Hungary.     

Determination of Cis- and Trans-18:1 fatty acid isomers in hydrogenated vegetable oils by high-resolution carbon nuclear magnetic resonance

Carbon nuclear magnetic resonance (¹³C NMR) methods for determining the composition of cis-/trans- and positional isomers in hydrogenated vegetable oils were developed to reduce analytical time. By selecting appropriate olefinic carbon peaks and by measuring individual peak areas subsequent to the identification of isomeric peaks on the NMR spectrum, compositional results of the isomers coincided well with those obtained by conventional gas chromatography (GC). Therefore, it is highly beneficial to choose the ¹³C NMR method when analysis time is limited. Though the proposed ¹³C NMR method is promising, further development is needed. For the time being, combination with the traditional GC method is still encouraged for precise compositional analysis of cis-/trans- and positional isomers.