Spectroelectrochemical sensing based on multimode selectivity simultaneously achievable in a single device. 16. Sensing by fluorescence

A fluorescence spectroelectrochemical sensor capable of detecting very low concentrations of metal complexes is described. The sensor is based on a novel spectroelectrochemical sensor that incorporates multiple internal reflection spectroscopy at an optically transparent electrode (OTE) coated with a selective film to enhance detection limits by preconcentrating the analyte at the OTE surface. Nafion was used as the selective cation exchange film for detecting Ru(bpy)(3)(2+), the model analyte, which fluoresces at 605 nm when excited with a 441.6-nm HeCd laser. The unoptimized linear dynamic range of the sensor for Ru(bpy)(3)(2+) is between 1 x 10(-)(11) and 1 x 10(-)(7) M with a calculated 2 x 10(-)(13) M detection limit. The sensor employs extremely thin films ( approximately 12 nm) without significantly sacrificing its sensitivity. The sensor response is demonstrated with varying film thicknesses. A state-of-the-art flow cell design allows variable cell volumes as low as approximately 4 microL. Fluorescence of the sample can be controlled by electromodulation between 0.7 and 1.3 V. Sensor operation is not reversible for the chosen model film (Nafion) and sample (Ru(bpy)(3)(2+)) but it can be regenerated with ethanol for multiple uses.     

Semi-infinite linear diffusion spectroelectrochemistry on an aqueous micro-drop

We report a technique for conducting semi-infinite diffusion spectroelectrochemistry on an aqueous micro-drop as an easy and economic way of investigating spectroelectrochemical behavior of redox active compounds and correlating spectroscopic properties with thermodynamic potentials on a small scale. The chemical systems used to demonstrate the aqueous micro-drop technique were an absorbance based ionic probe [Fe(CN)(6)](3-/4-) and an emission based ionic probe [Re(dmpe)(3)](2+/+). These chemical systems in a micro-drop were evaluated using cyclic voltammetry and UV-visible absorbance and luminescence spectroscopies.     

O(2)-responsive chemical sensors based on hybrid xerogels that contain fluorinated precursors

We report the development and analytical figures of merit associated with several new O(2)-responsive sensor materials. These new sensing materials are formed by sequestering the luminophore tris(4,7-diphenyl-1,10-phenanthroline)ruthenium(II) ([Ru(dpp)(3)](2+)) within hybrid xerogels that are composed of two of the following methoxysilanes: tetramethoxysilane, n-propyl-trimethoxysilane, 3,3,3-trifluoropropyl-trimethoxysilane, phenethyl-trimethoxysilane, and pentafluorophenylpropyl-trimethoxysilane. Steady-state and time-resolved luminescence measurements are used to investigate these hybrid xerogel-based sensor materials and elucidate the underlying reasons for the observed performance. The results show that many of the [Ru(dpp)(3)](2+)-doped composites form visually uniform, crack-free xerogel films that can be used to construct O(2) sensors that have linear calibration curves and excellent long-term stability. To the best of our knowledge, the [Ru(dpp)(3)](2+)-doped fluorinated hybrid xerogels also exhibit the highest O(2) sensitivity of any reported [Ru(dpp)(3)](2+)-based sensor platform.     

Use of polymeric indicator for electrochemical DNA sensors: poly(4-vinylpyridine) derivative bearing [Os(5,6-dimethyl-1,10-phenanthroline)2Cl]2+

A poly(4-vinylpyridine) (PVP) derivative bearing redox-active osmium complexes, PVP-[Os(5,6-dmphen)(2)Cl](2+) (5,6-dmphen = 5,6-dimethyl-1,10-phenanthroline), was employed as a hybridization indicator for electrochemical DNA sensors. PVP-[Os(5,6-dmphen)(2)Cl](2+) exhibited approximately 1000 times higher sensitivity than the corresponding monomeric analogue, [Os(5,6-dmphen)(3)](2+), in DNA determination due to polymeric effects. The detection limit of the present sensor was approximately 0.5 amol. Another merit of the polymeric indicator is that the redox potential was found to be +360 mV (vs Ag/AgCl), which is significantly lower than that reported for the monomeric analogue (+672 mV). The polymeric indicator was applicable to the discrimination of single- and double-base-mismatched DNAs from fully matched target DNA. The polymeric indicator can be removed from the electrode surface by rinsing the electrode in a high-temperature buffer for 6 min, and thus, the polymeric indicator-based DNA sensor can be used repeatedly.     

Simple template-free solution route for the synthesis of Ni(SO(4))(0.3)(OH)(1.4) nanobelts and their thermal degradation

Nanobelts of nickel hydroxyl sulfate have been prepared on a large scale via a simple template-free hydrothermal reaction on the basis of a complex [Ni(NH(3))(6)](2+) formed with Ni(2+) and ammonia in an ethanol-water solution. The as-synthesized nanobelts were single crystals, with several tens of microns in length and 50-150?nm in width. The nanobelts were enclosed by top surfaces (100) and side surfaces (001) and their growth direction was parallel to [010]. The function of aqueous ammonia and ethanol was discussed. Furthermore, nanostructures of a mixture of crystralline NiO and amorphous nickel sulfate with various morphologies, such as nanobelts, porous nanobelts, and nanoparticles, were obtained by the thermal treatment of the as-synthesized Ni(SO(4))(0.3)(OH)(1.4) nanobelts at different temperatures.     

Spectroelectrochemical sensing based on multimode selectivity simultaneously achievable in a single device. 20. Detection of metal ions in different oxidation states

Spectroelectrochemical sensing a metal in two different oxidation states, both of which are weakly absorbing in the visible wavelength range, was demonstrated with ferrous and ferric ion. The sensor consisted of an indium tin oxide optically transparent electrode (ITO OTE) coated with a thin film of Nafion preloaded with the ligand 2,2'-bipyridine (bipy). Fe2+ in the sample partitioned into the film where it reacted with bipy to form Fe(bipy)3(2+), which absorbs strongly at 520 nm. The change in absorbance (DeltaA) at 520 nm associated with the accumulation of Fe(bipy)3(2+) complex in the film was measured by attenuated total reflectance spectroscopy and was proportional to the concentration of Fe2+ in the sample. Iron in the Fe3+ form can also be determined, but it has a more complex coordination chemistry involving formation of [Fe2(bipy)4O(H2O)2]4+ as well as Fe(bipy)3(3+) in the film. Fe3+ was detected indirectly by reducing the nonabsorbing Fe3+-bipy complexes that accumulated in the film to absorbing Fe(bipy)3(2+) and monitoring DeltaA at 520 nm. The effects of film thickness and ligand concentration in the film on sensor sensitivity and response time for Fe2+ were evaluated. Detection limits of 0.6 x 10(-6) M for Fe2+ and 2 x 10(-6) M for Fe3+ were obtained with 300 nm thick films after 30 min of exposure to a quiescent sample. Careful manipulation of the potential applied with simultaneous optical detection enables Fe2+ to be distinguished from Fe3+, which is the first step in developing a sensor for speciating the two oxidation states in a mixture.     

Fluorescence quenching of the europium tetracycline hydrogen peroxide complex by copper (II) and other metal ions

The europium-tetracycline complex [Eu(Tc)] is known to show only weak fluorescence with an emission maximum at 615 nm. On addition of hydrogen peroxide (HP), the strongly fluorescent [Eu(Tc)(HP)] complex is formed, which displays a 15-fold stronger luminescence intensity. This study describes the decrease in luminescence intensity of the [Eu(Tc)(HP)] complex in aqueous solution in the presence of Cu2+, Fe3+, Ag+, Al3+, Zn2+, Co2+, Ni2+, Mn2+, Ca2+, and Mg2+. Static and dynamic quenching can be induced by Cu2+, and these processes were quantified by means of their quenching constants. Stern-Volmer plots were also derived from lifetime imaging measurements accomplished by the rapid lifetime determination (RLD) technique based on microwell plate assays, and also by the time-correlated single photon counting (TCSPC) technique. According to those data, a time-resolved fluorescent method for copper determination can be proposed that is based on dynamic quenching of the [Eu(Tc)(HP)] complex by Cu2+ ions. The response to copper concentrations is linear up to 1.6 micromol L(-1), providing a detection limit of 0.2 micromol L(-1).     

Diffusion boundary layer of a rotating disk electrode as a thin-layer spectroelectrochemical cell

A UV-visible rapid scan spectrophotometer (RSS) was coupled to a Au rotating disk electrode (RDE) for monitoring at near-normal incidence the reflection-absorption spectrum of the diffusion boundary layer in [Fe(CN)(6)](4)(-) aqueous solutions over a potential region in which [Fe(CN)(6)](4-) oxidizes, generating highly absorbing [Fe(CN)(6)](3-) (lambda(max) = 420 nm). Measurements were performed under steady-state conditions at rotation rates, omega, in the range 300 相似文献   

Stable tris(2,2'-bipyridine)ruthenium(III) for chemiluminescence detection

Two exceedingly stable [Ru(bipy)(3)](3+) reagents were prepared by dissolving either [Ru(bipy)(3)](ClO(4))(2) in acetonitrile (containing 0.05 M HClO(4)) or [Ru(bipy)(3)]Cl(2)·6H(2)O in 95:5 glacial acetic acid-acetic anhydride (containing 0.05 M H(2)SO(4)) followed by oxidation with PbO(2). These conveniently prepared solutions provide highly reproducible chemiluminescence detection over long periods of analysis, avoiding the need for recalibration or preparation of fresh reagent solutions and without the complications associated with online chemical or electrochemical oxidations. The reagent prepared in acetonitrile produced much greater signal intensities with a range of analytes and was deemed most suitable for high-performance liquid chromatography (HPLC) with postcolumn chemiluminescence detection.     

Enthalpy vs Entropy Driven Complexation of Homoallylic Alcohols by Rh(I) Complexes

The thermodynamics of binding between several homoallylic alcohols and simple olefinic Rh(I) compounds was examined with (1)H NMR spectroscopy and ITC. (1)H NMR titrations revealed moderate binding of these alcohols with [Rh(COD)(2)](+) (1) and [Rh(COD)(CH(3)CN)(2)](+) (3), but weaker binding with [Rh(NBD)(2)](+) (2). ITC indicated that the complexation with [Rh(COD)(2)](+) is mainly governed by enthalpy whereas binding with [Rh(COD)(CH(3)CN)(2)](+) is entirely driven by entropy. The thermodynamic parameters for the homoallylic alcohol binding of Rh(I) complexes 1-3 are consistent with crystallographic data.     

Reaction of Aryl Diazonium Salts and Diiron(I) Dithiolato Carbonyls: Evidence for Radical Intermediates

Treatment of Fe(2)(pdt)(CO)(4)(dppv) (1) with aryldiazonium salts affords the 34e(-) adducts [Fe(2)(pdt)(μ-N(2)Ar)(CO)(4)(dppv)](+) (pdt(2-) = 1,3-propanedithiolate, dppv = cis-C(2)H(2)(PPh(2))(2)). Under some conditions, the same reaction gave substantial amounts of [1](+), the product of electron-transfer. Consistent with the influence of electron transfer in the reactions of some electrophiles with Fe(I)Fe(I) dithiolates, the reaction of [Me(3)S(2)](+) and Fe(2)(pdt)(CO)(4)(dppbz) was found to give [Fe(2)(pdt)(CO)(4)(dppbz)](+) as well as Me(2)S and Me(2)S(2) (dppbz = 1,2-bis(diphenylphosphino)benzene).     

DNA biosensor for detection of Helicobacter pylori using phen-dione as the electrochemically active ligand in osmium complexes

A surface-based method for the study of the interactions of DNA with redox-active 1,10-phenantroline-5,6-dione (phen-dione) osmium complexes is described. The study was carried out using gold electrodes modified with DNA via adsorption and [Os(bpy)(2)(phe-dione)](3+/2+) (bpy = 2,2'-bipyridyl) or [Os(phen)(2)(phen-dione)](3+/2+) (phen = 1,10-phenantroline) as electrochemical reported molecules. The method, which is simple and reagent-saving, allows the accumulation of osmium complexes within the DNA layer. The amount of osmium complex bound by the adsorbed layer of DNA was determined from the voltammetric charge associated with the osmium redox process of the immobilized metal complex. The quinone moiety of the phen-dione ligand was useful as an indicator for electrochemical DNA sensing because of its redox response at low potentials. A thiol-linked single-stranded Helicobacter pylori DNA probe was immobilized, through S-Au bonds on to a gold electrode (density of modification 86 pmol/cm(2)). Following hybridization with the complementary DNA sequence, the osmium complex was electrochemically accumulated within the double-stranded DNA layer. Electrochemical detection was performed by differential pulse voltammetry over the potential range where the quinone moiety was redox active (i.e., at very low potentials, -0.020 V vs SSCE); with this approach, a sequence of the H. pylori could be quantified over the range from 5 to 20 pmol with a linear correlation of r = 0.9888 and a detection limit of approximately 6 pmol.     

Hybrid oxygen-responsive reflective Bragg grating platforms

Oxygen responsive sensor platforms were fabricated by pin printing tris(4,7-diphenyl-1,10-phenanthroline)ruthenium(II) ([Ru(dpp)(3)](2+)) doped sols onto wavelength tuned reflective Bragg gratings. In an epi-luminescence configuration, these Bragg gratings (Gr) were designed to selectively reflect the O(2) responsive [Ru(dpp)(3)](2+) emission toward the detector to enhance the detected signal magnitude. The xerogel based sensors were formed onto (i) glass (XGl), (ii) directly on top of the grating (XGrGl), or (iii) on the glass substrate opposite the grating (XGlGr). The results show that all sensors exhibit linear, statistically equivalent O(2) sensitivities, and the XGrGl platform yields up to an 8-fold increase in relative detected analytical signal (RDAS) in comparison to the control (XGl) platform.     

Controlled self-assembly of metal-organic frameworks on metal nanoparticles for efficient synthesis of hybrid nanostructures

We report a novel approach for synthesizing inorganic nanoparticle/metal-organic frameworks (MOFs) heterostructured nanocomposites by self-assembly of MOFs on nanoparticles. This approach involves the synthesis of Au nanoparticles and preferential growth of [Cu(3)(btc)(2)](n) frameworks consisting of Cu(2+) ions and benzene-1,3,5-tricarboxylate (btc) on nanoparticles. Aggregates consisting of 11-mercaptoundecanoic acid (MUA)-stabilized Au nanoparticles linked by Cu(2+) ions were necessary for preferential self-assembly of [Cu(3)(btc)(2)](n) frameworks on the aggregates, resulting in the formation of Au nanoparticles/[Cu(3)(btc)(2)](n) nanocomposites. The present approach was confirmed to be applicable for other hybrids consisting of Au nanoparticles and tetragonal [Cu(2)(ndc)(2)(dabco)](n) frameworks.     

DNA binding to fluorescent ruthenium species released from calcium phosphate/nanoporous silicon structures

This work centers on an analysis of calf thymus DNA binding to emissive Ru complexes which diffuse from biocompatible calcium phosphate/nanoporous silicon films. These nanostructures were characterized by scanning electron microscopy, atomic force microscopy, energy dispersive X-ray analysis, and infrared vibrational spectroscopy. In terms of polynucleotide binding, three different systems were analyzed: (1) an aqueous solution of Ru(phen)(3)2+ (a control); (2) surface-adsorbed Ru(phen)(3)2+ onto undoped calcium phosphate/porous Si/Si in aqueous solution; (3) as-prepared and annealed Ru(phen)3(2+)-doped calcium phosphate/porous Si structures in water. For films with fluorescent Ru originally embedded throughout the film, biphasic diffusion character is found; such behavior is attributed to DNA binding to both surface-bound Ru(phen)(3)2+ and species which originate from deeper regions of the film.     

Ion-Pair Extraction of Metalloporphyrins into Acetonitrile for Determination of Copper(II)

Equilibrium study of ion-pair extraction of a cationic water-soluble porphyrin [5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrin, H(2)tmpyp(4+)] and its metalloporphyrins (MP) into the acetonitrile layer, separated by addition of sodium chloride (4.00 mol dm(-)(3)) to a 1:1 (v/v) acetonitrile-water mixed solvent, was carried out to develop a new and useful method for the determination of a subnanogram amount of copper(II). M denotes Zn(2+), Cu(2+), Co(3+), Fe(3+), and Mn(3+), and P(2)(-) is porphyrinate ion. The extraction and dissociation constants of the ion-pair complexes, defined by K(ex) = [MP(ClO(4))(4)](org)[MP(4+)](aq)(-)(1)[ClO(4)(-)](aq)(-)(4), K(dis,1) = [MP(ClO(4))(3)(+)](org)[ClO(4)(-)](org)[MP(ClO(4))(4)](org)(-)(1), and K(dis,2) = [MP(ClO(4))(2)(2+)](org)[ClO(4)(-)](org)[MP(ClO(4))(3)(+)](org)(-)(1), were determined by taking into account the partition constant of sodium perchlorate (K(D) = 1.82 ± 0.01). The equilibrium constants were found to be K(ex)K(dis,1) = (7.2 ± 1.3) × 10(4), (6.4 ± 0.9) × 10(4), (1.35 ± 0.13) × 10(5), (4.8 ± 0.6) × 10(3), (1.23 ± 0.05) × 10(4), and (1.42 ± 0.07) × 10(3) at 25 °C for the free base porphyrin (H(2)tmpyp(4+)) and the metalloporphyrins of zinc(II), copper(II), cobalt(III), iron(III), and manganese(III), respectively. The K(dis,2) values were (2.9 ± 1.4) × 10(-)(2), (3.1 ± 1.1) × 10(-)(2), (8.0 ± 4.9) × 10(-)(3), and (5.1 ± 2.2) × 10(-)(2) for the free base porphyrins and the metalloporphyrins of zinc(II), copper(II), and cobalt(III), respectively. The results were developed for determination of a trace amount of copper(II) (3 × 10(-)(8)-4 × 10(-)(6) mol dm(-)(3)) in natural water samples using H(2)tmpyp(4+) with a molar absorptivity of 3.1 × 10(5) mol(-)(1) dm(3) cm(-)(1) at a precision of 1.3% (RSD). The determination of copper(II) was not interfered by the presence of 10(-)(4) mol dm(-)(3) of Mn(2+), Co(2+), Ni(2+), Hg(2+), Cd(2+), Ag(+), Cr(3+), V(5+), Al(3+), Mg(2+), Ca(2+), Br(-), I(-), SCN(-), and S(2)O(3)(2)(-) and 10(-)(5) mol dm(-)(3) of Fe(3+), Zn(2+), and Pd(2+).     

The effects of nonionic surfactants on the tris(2,2'-bipyridyl)ruthenium(II)--tripropylamine electrochemiluminescence system

The electrochemistry and electrogenerated chemiluminescence (ECL) of Ru(bpy)3(2+) (bpy = 2,2'-bipyridyl) were studied in the presence of the nonionic surfactants Triton X-100, Thesit, and Nonidet P40. The anodic oxidation of Ru(bpy)3(2+) produces ECL in the presence of tri-n-propylamine in both aqueous and surfactant solutions. Increases in both ECL efficiency (> or =8-fold) and duration of the ECL signal were observed in surfactant media. A shift to lower energies of the Ru(bpy)3(2+) ECL emission by approximately 8 nm was also observed. The one-electron oxidation of Ru(bpy)3(2+) to Ru(bpy)3(3t) occurs at + 1.03 V vs Ag/AgCl in aqueous buffered (0.2 M potassium phosphate) solution as found by square wave voltammetry. This potential did not shift in surfactant systems, indicating that the redshifts in ECL emission are due to stabilization of ligand pi* orbitals in the metal-to-ligand charge-transfer excited state. These results are consistent with hydrophobic interactions between Ru(bpy)3(2+) and the nonionic surfactants.     

Multilabeling biomolecules at a single site. 1. Synthesis and characterization of a dendritic label for electrochemiluminescence assays

Ultrasensitive bioanalytical assays are of great value for early detection of human diseases and pathogens. The sensitivities of immunoassays and DNA probing can be enhanced by multilabeling the biorecognition partner used for affinity-based assays. However, the bioreactivity of biomolecules is affected by a high degree of multilabeling at multiple functional sites. It is proposed that dendritic scaffoldings be used to link multiple signal-generating units to a single site with potentially minimum impact on the bioaffinity. A prototype label, a zeroth-generation dendron, bearing three [Ru(bpy)(3)](2+) units for electrochemiluminescence (ECL) assays was synthesized and characterized preliminarily by spectroscopic, electrochemical, and ECL methods. No evidence of interaction between the neighboring [Ru(bpy)(3)](2+) units in the label molecule was found from these characterizations. Both the photoluminescence and ECL of the prototype label have features very similar to those of mononuclear [Ru(bpy)(3)](2+) compounds. Labeling a model protein with a triad of [Ru(bpy)(3)](2+) at one NH(2) position was demonstrated. The results reported here provide support to applying the proposed multilabeling strategy to affinity-based bioanalytical assays.     

Chemiluminescence detection using regenerable tris(2,2'-bipyridyl)ruthenium(II) immobilized in Nafion.

The development of a detection method based on the electrogenerated chemiluminescence of tris(2,2'-bipyridine)ruthenium(II), (Ru(bpy)3(2+], immobilized in a Nafion film coated on an electrode is discussed. Control of the electrode potential controls creation of the reactive reagent Ru(bpy)3(3+) which reacts with certain analytes to yield chemiluminescence emission of intensity proportional to the analyte concentration. The reaction results in Ru(bpy)3(3+) being converted to Ru(bpy)3(2+), which then is recycled to Ru(bpy)3(3+) again at the electrode. This sensor has been used in flow injection to determine oxalate, alkylamines, and NADH. Detection limits are 1 microM, 10 nM, and 1 microM, respectively, with working ranges extending over 4 decades in concentration. Sensitivity is constant over the wide pH range from 3 to 10. With oxalate, and to a small extent with amines, emission intensities increase with increasing ionic strength; this was shown to be a phenomenon related to the Nafion film and not to the chemiluminescence reaction. Emission intensities increase with temperature. The sensor remains stable for several days with suitable storage conditions. Significant amounts of Ru(bpy)3(3+) are shown to be capable of storage within the film.     

Large-amplitude Fourier transformed high-harmonic alternating current cyclic voltammetry: kinetic discrimination of interfering Faradaic processes at glassy carbon and at boron-doped diamond electrodes

Significant advantages of Fourier transformed large-amplitude ac higher (second to eighth) harmonics relative to responses obtained with conventional small-amplitude ac or dc cyclic voltammetric methods have been demonstrated with respect to (i) the suppression of capacitive background currents, (ii) the separation of the reversible reduction of [Ru(NH(3))(6)](3+) from the overlapping irreversible oxygen reduction process under conditions where aerobic oxygen remains present in the electrochemical cell, and (iii) the kinetic resolution of the reversible [Ru(NH(3))(6)](3+/2+) process in mixtures of [Fe(CN)(6)](3-) and [Ru(NH(3))(6)](3+) at appropriately treated boron-doped diamond electrodes, even when highly unfavorable [Fe(CN)(6)](3-) to [Ru(NH(3))(6)](3+) concentration ratios are employed. Theoretical support for the basis of kinetic discrimination in large-amplitude higher harmonic ac cyclic voltammetry is provided.