Performance analysis of a solar photovoltaic operated domestic refrigerator

This paper describes the fabrication, experimentation and simulation stages of converting a 165 l domestic electric refrigerator to a solar powered one. A conventional domestic refrigerator was chosen for this purpose and was redesigned by adding battery bank, inverter and transformer, and powered by solar photovoltaic (SPV) panels. Various performance tests were carried out to study the performance of the system. The coefficient of performance (COP) was observed to decrease with time from morning to afternoon and a maximum COP of 2.102 was observed at 7 AM. Simulations regarding economic feasibility of the system for the climatic conditions of Jaipur city (India) were also carried out using RETScreen 4. It was observed that the system can only be economically viable with carbon trading option taken into account, and an initial subsidy or a reduction in the component costs – mainly SPV panels and battery bank.     

Why the oil companies lost solar

Solar energy is a growing source of electricity supply. Oil companies including BP and Shell recognized this early on and entered the solar industry when it was still in its relative infancy. These companies invested heavily in vertically integrated solar companies that were at one point among the largest in the world. But neither BP nor Shell was successful, and they both decided to exit the solar market. This stands as a paradox since such companies have the funds, the long-term perspectives, the management systems, the multinational presence and the lobbying clout to potentially succeed in this new energy industry. Why were they not successful, and why did they ultimately exit? This paper uses innovation theory to explore the reasons why large incumbent corporations typically fail to succeed in commercializing disruptive innovations at scale. Evidence from semi-structured interviews and discussions with former employees of BP Solar and Shell Solar confirm the explanatory power of key constructs from innovation theory in accounting for the big oil companies' experience with solar technology. Ultimately, the findings suggest that oil companies would have done better to treat their solar businesses as separate stand-alone entities.     

Design,development and testing of an improved multipurpose solar energy device

This paper reports the design, development and testing of an improved multipurpose solar energy device. The novel feature of the device is that it can be used as a solar water heater and solar still simultaneously and, when required, as a solar cabinet dryer by incorporating minor changes.     

Design and testing of Sudanese solar box cooker

This study aimed at developing a solar box cooker to be used in Sudan. The cooker was designed and fabricated in the workshop of Centre for Energy Studies, Indian Institute of Technology (IIT), Delhi. A series of tests were carried out during nine days to determine the two factors of merits F1 and F2 in order to make comparison of the cooker against the other Indian designs. The results obtained verified acceptability of the cooker and found successful.     

An investigation of mismatch losses in solar photovoltaic cell networks

Solar photovoltaic (PV) arrays in field conditions deliver lower power than the array rating. In this paper, the sensitivity of solar cell parameters in the variation of available power from the array is investigated. The parameters characteristic of aging and fresh cells used in prototype field systems have been used for computation of reduction in the available power. It is found that in series string the fractional power loss would increase from 2% to 12% with aging of solar cells. However, this fractional power loss may be reduced to 0.4–2.4% by an appropriate series-paralleling.     

Performance of off-grid residential solar photovoltaic power systems using five solar tracking modes in Kunming,China

This paper compares the performance of a 2.02 kW_p off-grid residential solar photovoltaic (PV) power system using PVSYST simulation software for a household in Kunming, Yunnan province, China. The monthly available solar energy; missing energy; array, final, and reference yields, performance ratio; and array capture and system losses were analyzed for five solar tracking modes: fixed tilted plane, seasonal tilt adjustment, horizontal axis tracking, vertical axis tracking, and dual axis tracking. Although there were some similar aspects across the five systems, minimum available solar energy (2461 kWh/y) and maximum missing energy (134.68 kWh/y) were obtained using the fixed tilted plane system (tilt angle = 25°, azimuth angle = 0°), whereas maximum available solar energy (3081 kWh/y) and minimum missing energy (48.53 kWh/y) in October were obtained using the dual axis tracking system. Average monthly performance ratio was maximal for the fixed tilted plane system (0.689), and minimal for the dual axis tracking system (0.596).     

Development and testing of a solar air-heater with conical concentrator

The free convection performance of a solar air heater with a cylindrical absorber centred to a conical concentrator for focusing incident solar radiation was studied. The primary objective was to heat air to higher temperatures than those obtainable in flat-plate collectors.The experiments were carried out and the data recorded in summer daytime, considering collector tilting angle and type of absorbing surface as the investigation parameters.It was found that a tilting angle under local latitude would be appropriate for collector installation. Although the efficiency of the heater at free convection conditions was very much smaller than flat-plate solar air-heaters, exit air temperatures reached up to 150 °C, which could allow utilisation in high temperature applications. A selective absorber surface improved appreciably the performance of the solar air-heater.     

A two dimensional thermal network model for a photovoltaic solar wall

A two dimensional thermal network model is proposed to predict the temperature distribution for a section of photovoltaic solar wall installed in an outdoor room laboratory in Concordia University, Montréal, Canada. The photovoltaic solar wall is constructed with a pair of glass coated photovoltaic modules and a polystyrene filled plywood board as back panel. The active solar ventilation through a photovoltaic solar wall is achieved with an exhaust fan fixed in the outdoor room laboratory. The steady state thermal network nodal equations are developed for conjugate heat exchange and heat transport for a section of a photovoltaic solar wall. The matrix solution procedure is adopted for formulation of conductance and heat source matrices for obtaining numerical solution of one dimensional heat conduction and heat transport equations by performing two dimensional thermal network analyses. The temperature distribution is predicted by the model with measurement data obtained from the section of a photovoltaic solar wall. The effect of conduction heat flow and multi-node radiation heat exchange between composite surfaces is useful for predicting a ventilation rate through a solar ventilation system.     

Design and development of a solar cooker cum drier

A solar cooker cum drier has been designed and developed. In designing this unit, optimum booster-collector geometry has been considered in order to eliminate the requirement of sun tracking. Tilting arrangements have also been provided to capture more solar energy. This dual purpose device has been found useful for cooking food and dehydrating fruit or vegetables.     

Design, development and testing of a double reflector hot box solar cooker with a transparent insulation material

A double reflector hot box solar cooker with a Transparent Insulation Material (TIM) has been designed, fabricated, tested and the performance compared with a single reflector hot box solar cooker without TIM. A 40 mm thick honeycomb made of polycarbonate capillaries was encapsulated between two glazing sheets of the cooker to minimise convective losses from the window so that even during an extremely cold but sunny day two meals can be prepared, which is not possible in a hot box solar cooker without TIM. The use of one more reflectors resulted in an avoidance of tracking towards sun for 3 h so that cooking operations could be performed unattended, as compared to a hot box solar cooker where tracking ahead of the sun is required every hour. The efficiencies were 30.5% and 24.5% for cookers with and without a TIM respectively, during the winter season at Jodhpur. The energy saving by use of a solar cooker with TIM has been estimated to be 1485.0 MJ of fuel equivalent per year. The payback period varies between 1.66 and 4.23 y depending upon the fuel it replaces, and is in increasing order with respect to the following fuels: electricity, firewood, coal, LPG and kerosene. The estimated life is about 15 y. Therefore, the use of a solar cooker is economical. The double reflector hot box solar cooker with TIM will be a boon in popularising solar cookers in developing countries.     

Expanding photovoltaic penetration with residential distributed generation from hybrid solar photovoltaic and combined heat and power systems

The recent development of small scale combined heat and power (CHP) systems has provided the opportunity for in-house power backup of residential-scale photovoltaic (PV) arrays. This paper investigates the potential of deploying a distributed network of PV + CHP hybrid systems in order to increase the PV penetration level in the U.S. The temporal distribution of solar flux, electrical and heating requirements for representative U.S. single family residences were analyzed and the results clearly show that hybridizing CHP with PV can enable additional PV deployment above what is possible with a conventional centralized electric generation system. The technical evolution of such PV + CHP hybrid systems was developed from the present (near market) technology through four generations, which enable high utilization rates of both PV-generated electricity and CHP-generated heat. A method to determine the maximum percent of PV-generated electricity on the grid without energy storage was derived and applied to an example area. The results show that a PV + CHP hybrid system not only has the potential to radically reduce energy waste in the status quo electrical and heating systems, but it also enables the share of solar PV to be expanded by about a factor of five.     

Performance and testing of large-size solar water heater cum solar cooker

The performance of a novel device has been tested. The device can be used as a collector cum storage type solar water heater during the winter, and, with minor adjustments, it can be used as a hot-box solar cooker. The device can provide hot water at 50–60°C in the evening, which can be maintained at 40–45°C until the following morning. It can also be used for cooking food for about 40 people. The efficiencies of the device as a solar water heater and as a solar cooker have been found to be 67.7% and 29.8%, respectively. The payback period varies between 1.64 to 5.90 years depending on the fuel it replaces. The payback periods are of increasing length with respect to the fuels firewood, coal, electricity, LPG and kerosene.     

Demonstration plant of a multi wick solar still

A solar distillation plant of capacity 70 litres/day (annual average) has been installed at the Centre of Energy Studies, Indian Institute of Technology, New Delhi, India. The system has been working for the last 1 year, and its performance is found to be satisfactory. It meets the requirements of distilled water in the Institute.     

Optimum power from a solar thermal power plant using solar concentrators

In this paper, the optimum temperature of operation of a solar concentrator and thus the maximum power obtained from a solar thermal power plant has been calculated. Results are plotted graphically and discussed.     

Novel high efficient offline sensorless dual-axis solar tracker for using in photovoltaic systems and solar concentrators

In this study, a novel high accurate offline sensorless dual-axis solar tracker is proposed that can be widely used in photovoltaic systems and solar concentrators. The offline estimated data extracted from solar map equations are used by the tracker to find the sun direction where the maximum value of solar energy is captured. The solar tracker has been built, and it is experimentally verified that 19.1%–30.2% more solar energy can be captured depending on the seasons by utilizing the tracker. The contribution of this work is that the proposed offline sensorless dual-axis solar tracker not only has a very simple structure with a fabrication cost much less than sensor based solar trackers but also high accurately tracks the sun direction with a very small tracking error of only 0.43° which is less than the other sensorless and sensor based dual-axis solar trackers reported in the literature excluding the sensor based dual-axis solar trackers equipped with expensive sensors mounted on high accurate mechanical carriers. Furthermore, unlike all sensor based solar trackers, since the technique is offline, the proposed tracker does not use any feedback signal, and thus, its operation is independent from external disturbances and weather conditions such as cloudy sky.     

Lead emissions from solar photovoltaic energy systems in China and India

China and India are embarking on ambitious initiatives over the next decade to expand solar photovoltaic (PV) power in underserved regions. China proposes adding 1.6 GW of solar capacity by 2020, while India plans 12 GW in addition to 20 million solar lanterns by 2022. These technologies rely heavily on lead-acid batteries (LABs) for storage. China and India’s lead mining, battery production, and recycling industries are relatively inefficient—33% and 22% environmental loss rates, respectively. Based on the quantity of lead batteries employed in existing PV systems, we estimate environmental lead emissions in China and India for new units installed under their solar energy goals. The average loss rates are 12 kg (China) and 8.5 kg (India) of lead lost per kW-year of installed PV capacity in these countries. The planned systems added in China and India will be responsible for 386 and 2030 kt of environmental lead loss, respectively, over their lifespan—equal to 1/3 of global lead production in 2009. Investments in environmental controls in lead smelting, battery manufacturing, and recycling industries along with improvements in battery take-back policies should complement deployment of solar PV systems to mitigate negative impacts of lead pollution.     

Improved photovoltaic energy output for cloudy conditions with a solar tracking system

This work describes measurements of the solar irradiance made during cloudy periods in order to improve the amount of solar energy captured during such periods. It is well-known that 2-axis tracking, in which solar modules are pointed at the sun, improves the overall capture of solar energy by a given area of modules by 30-50% versus modules with a fixed tilt. On sunny days the direct sunshine accounts for up to 90% of the total solar energy, with the other 10% from diffuse (scattered) solar energy. However, during overcast conditions nearly all of the solar irradiance is diffuse radiation that is isotropically-distributed over the whole sky. An analysis of our data shows that during overcast conditions, tilting a solar module or sensor away from the zenith reduces the irradiance relative to a horizontal configuration, in which the sensor or module is pointed toward the zenith (horizontal module tilt), and thus receives the highest amount of this isotropically-distributed sky radiation. This observation led to an improved tracking algorithm in which a solar array would track the sun during cloud-free periods using 2-axis tracking, when the solar disk is visible, but go to a horizontal configuration when the sky becomes overcast. During cloudy periods we show that a horizontal module orientation increases the solar energy capture by nearly 50% compared to 2-axis solar tracking during the same period. Improving the harvesting of solar energy on cloudy days is important to using solar energy on a daily basis for fueling fuel-cell electric vehicles or charging extended-range electric vehicles because it improves the energy capture on the days with the lowest hydrogen generation, which in turn reduces the system size and cost.     

Applications of carbon materials in photovoltaic solar cells

Carbon-based photovoltaic cells (PVCs) have attracted a great deal of interest for both scientific fundamentals and potential applications. In this paper, applications of various carbon materials in PVCs, especially in silicon-based solar cells, organic solar cells and dye-sensitized solar cells, are reviewed. The roles carbon materials played in the PVCs are discussed. Further research on solar cells comprised solely of carbon is prospected.     

Design and development of a simple solar dehydrator for crop drying

In this paper, a simple solar collector cum crop drying system is described. The categorical objectives of this paper are (1) to identify a suitable medium capacity solar drying system and (2) to study analytically and experimentally the performance characteristics of this newly fabricated solar drying system. The drying ratio, rehydration ratio, culinary and organoleptic characteristics, of Methi and Bhendi crops were studied and presented in this paper.     

Design optimization of solar cooker

Various designs of solar cookers have been theoretically investigated with a view to optimize their performance. Starting from a conventional box type cooker, various combinations of booster mirrors have been studied to arrive at a final design, aimed at providing a cooker, which can be fixed on a south facing window (for countries of northern hemisphere, mainly situated near the tropic of Cancer). This cooker, with a rear window opening, may provide higher cooking temperature for a fairly large duration of the day. Two or three changes in positions of the side booster mirrors, without moving the cooker as a whole has been proposed. The new design has been experimentally implemented and compared with a conventional box type solar cooker. Besides the convenience of a rear window opening, the cooker provides temperatures sufficiently high to enable cooking two meals a day.