共查询到20条相似文献,搜索用时 93 毫秒
1.
抗氧剂在聚氯乙烯加工中的应用 总被引:1,自引:0,他引:1
重点研究了抗氧剂对高钛白颜料含量和含金属颜料的PVC压延膜制品加工过程的作用机理及效果,指出对于高钛白含量的PVC压延膜制品,使用受阻酚类抗氧剂是有效且可取的;对于含有金属颜料的PVC压延膜制品,加入金属钝化剂和受阻酚类抗氧剂能有效阻止其在加工过程中的热降解及氧化降解。 相似文献
2.
3.
4.
5.
本文通过色差计、光度计、电子万能试验机以及扫描电子显微镜对比重质碳酸钙、轻质碳酸钙以及纳米碳酸钙填充PVC压延膜的热稳定性、力学性能和喷绘效果的影响进行研究。结果表明,三种碳酸钙均能确保PVC压延膜的热稳定性,而纳米碳酸钙喷绘效果最好。纳米碳酸钙的填充的PVC压延膜拉伸强度为14.7 MPa、断裂伸长率为279.9%,而重质碳酸钙和轻质碳酸钙的为13.2%、256.6%和11.9 MPa、243.1%,这是由于纳米碳酸钙颗粒比表面积大、分散性好,能均匀分散在PVC基体中,与PVC基体中的界面接触面积大,界面附着力增强所致。 相似文献
6.
分析了两种矿种制备出的不同细度重质碳酸钙(南召1号~8号和连州1号~5号)的性能指标,研究了这些不同细度重质碳酸钙粉体应用于PVC压延膜对其白度、拉伸强度、耐热性能与遮盖性能的影响。研究结果发现:从南召1号到8号,粉体的粒径在逐渐变小,粒径分布逐渐变窄,白度和吸油值均在逐渐增加;连州1号到5号粉体具有类似的变化规律。南召1号至8号粉体随着粉体白度和细度的提升,其应用于PVC压延膜的白度、拉伸强度、耐热性和遮盖力性能都在明显提升,其中,5号以上的产品填充PVC压延膜可以获得较好的综合性能,7号具有最佳的综合性能。连州1号至5号填充PVC压延膜,白度变化不大,拉伸强度增大,耐热性能和遮盖性能逐渐变好,其中,3号以上的产品均可获得较好的综合性能,5号具有最佳的综合性能。 相似文献
7.
8.
9.
10.
本文研究了低聚合度PVC透明料树脂的特性指标——透明度的测试方法。用压延成膜法选择了硬配方和有关的制片条件;在不同光学仪器上评价膜特性的基础上,选用光度计法的透光率值来表征PVC透明料的透明度;并考核了方法的重现性和误差,实测了典型样品。 相似文献
11.
A series of colorants based on renewable resources and food‐grade colorants have been evaluated for use in polypropylene (PP) and polyvinylchloride (PVC). It has been found that most of these colorants can be processed in PP at 200°C or even 260°C while maintaining good color intensity and color brightness. The colorants evaluated cover a large part of the color spectrum. In PP, the light stability of alizarin (red), carmine (red), indigo (blue), purpurin (red), quinizarin (red), and the aluminium lakes of quinoline yellow (yellow) and indigo carmine (blue) is close to the requirements for indoor applications. The blue colorants indigo and the aluminium lake of indigo carmine are, in principle, sufficiently light stable in PP for indoor applications. A few colorants showed bleeding from PP. Bonding of migrating colorants to the reactive carrier maleic anhydride grafted polypropylene, however, reduced bleeding of the colorant to a large extent. Also after processing in PVC at 200°C, good color intensity and saturation is maintained. Quinizarin, a structural analog of alizarin and purpurin, shows a light stability performance that is close to commercial lead chromate/molybdate orange based colorants. The best performing natural colorants are sufficiently heat and light stable for applications where moderate properties concerning heat resistance and (UV) light stability are required, such as underground PVC water drainage pipes and indoor PP applications. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2961‐2969, 2004 相似文献
12.
13.
Harrey E. Sarvis 《乙烯基与添加剂工艺杂志》1993,15(3):148-152
Polyvinyl chloride—PVC—has been commercial since the mid-1930s. It is one of the most versatile of all thermoplastic resins. By the end of this year, United States consumption of PVC resin could reach 4.2 million metric tons. Some of the key markets for PVC are pipe, siding, windows, floor coverings, wire and cable insulation, and protective coatings, to name just a few. As you would expect, color plays an integral part in many of these applications. The purpose of this paper is to review the major colorant types and families that are used to color PVC, with special emphasis placed on end-use applications. Within the context of coloring PVC, the continued use or replacement of lead and cadmium bearing colorants is discussed. 相似文献
14.
通过玻璃涂层法分别制备了纯聚氯乙烯(PVC)薄膜和添加钙钛矿型铌酸银(AgNbO3)光催化剂的复合膜(PVC/AgNbO3)。在紫外光照射条件下分别对PVC和PVC/AgNbO3薄膜进行了光催化降解实验。利用扫描电子显微镜、X射线衍射仪和傅里叶红外光谱对光照前后薄膜的形貌及光催化降解过程进行了分析表征。结果表明,6 W紫外光辐射480 h后,纯PVC薄膜失重为3.92 %;PVC/3 % AgNbO3、PVC/6 % AgNbO3、PVC/9 % AgNbO3、PVC/15 % AgNbO3复合薄膜分别失重19.16 %、22.94 %、26.59 %、31.75 %,AgNbO3光催化剂加速了PVC薄膜降解。 相似文献
15.
16.
综述了近年来PVC膜改性的技术进展,对PVC膜进行物理和化学改性,可以改变它的表面性质、阻止增塑剂向表面迁移并赋予PVC膜生物相容性等。改性后的PVC膜,不仅能应用于传统领域。还能应用于一些新的领域。 相似文献
17.
用纳米SiO2和纳米CaCO3来抑制喷绘用聚氯乙烯(PVC)膜中增塑剂的析出,并探讨了纳米SiO2和纳米CaCO3对喷绘PVC膜喷绘性能的影响。结果表明,纳米CaCO3和纳米SiO2可以有效抑制喷绘PVC膜中增塑剂的析出,纳米无机粒子含量越高,其抑制作用越明显,但纳米无机粒子含量超过20份时,PVC膜的力学性能和喷绘性能下降;纳米无机粒子提高了喷绘PVC膜的油墨吸收速度;当纳米SiO2和纳米CaCO3团聚颗粒较大时,对PVC膜的喷绘性能产生不利影响。 相似文献
18.
研究了增塑剂和无机填料的种类和含量对喷绘用聚氯乙烯(PVC)膜的喷绘性能的影响,结果表明:增塑效率高的增塑剂用于PVC膜,其喷绘性能更优异,无机填料的颗粒大小、种类和含量都对膜的喷绘性能有影响;并探讨了PVC膜的喷绘色彩机理及吸墨机理。 相似文献
19.
将马来酸单酯稀土热稳定剂(RETM)用于保鲜膜中,并对用RETM作稳定剂的PVC自粘膜的成膜性、粘附性、透明性、防雾性等进行了研究,结果表明:马来酸单酯稀土热稳定剂能改善PVC的塑化均匀性。提高熔体强度,改善自粘膜的成膜性。采用马来酸单酯稀土热稳定剂的自粘膜的粘附性、防雾性比采用有机锡热稳定剂(京锡8831)要好,而透光性与京锡8831基本相当,因此可以代替昂贵的有机锡热稳定剂在PVC自粘保鲜膜中应用。 相似文献
20.
以石墨粉和三氯化钛为原料,通过Hummers和水解法制备得石墨烯/二氧化钛(G/TiO2),将G/TiO2作为填料添加到聚氯乙烯(PVC)中,探究其对PVC薄膜性能的影响。结果表明,添加G/TiO2提高了PVC薄膜的力学性能、抗静电性能和耐紫外老化性能。添加G/TiO2的PVC薄膜的拉伸强度由纯PVC薄膜的12.79 MPa提升至22.74 MPa,提高了77.80%,断裂伸长率由77.73%提升至98.23%,提高了26.37%,表面电阻由大于1.034×1012Ω降低至8.156×105Ω,达到抗静电材料要求;经过150 h紫外老化后,纯PVC薄膜的拉伸强度由12.79 MPa降低至8.49 MPa,下降了33.62%;添加G/TiO2的PVC薄膜的拉伸强度由22.74 MPa降低至18.54 MPa,仅下降18.64%。 相似文献