The unidirectional glass fiber reinforced furfuryl alcohol for pultrusion. II. Correlation of processing parameters for optimizing the process

Unidirectional glass fiber reinforced furfuryl alcohol (FA) composites have been prepared by the pultrusion processes. The optimum processing parameters of the glass fiber reinforced FA composites by pultrusion has been studied. The effects of the optimum processing parameters on the properties (flexural strength, flexural modulus, notched Izod impact strength, glass transition temperature (T_g), dynamic shear storage modulus (E'), shrinkage ratio, and roughness) investigated including die temperature, pulling rate, postcure temperature and time, and filler type and content. Results show that the pultruded composites possessed various optimum pulling rates at different die temperatures. On the basis of the DSC diagram, the swelling ratio and the mechanical properties of pultruded composites, the optimum die temperature can be determined. The mechanical properties and T_g increase at a suitable postcure temperature and time. Furthermore, the properties which decrease due to the degradation of pultruded composites for a long postcure time will be discussed. The mechanical properties of pultruded composites reach a maximum value at various filler content corresponding to the talc and calcium carbonate, respectively, and then decreased. When the fillers are added to the pultruded glass fiber reinforced FA composites, the shrinkage ratio of composites become smaller, and the surface of composites became smooth. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Pultruded fiber reinforced blocked polyurethane (PU) composites. II. Processing variables and dynamic mechanical properties

Unidirectional fiber reinforced blocked polyurethane (PU) composites have been prepared by the pultrusion process. The effects of processing variables on the mechanical properties and dynamic mechanical properties of fiber reinforced PU composites by pultrusion have been studied. The processing variables investigated included pulling rate (in-line speed), die temperature, postcure time and temperature, and filler type and content. The dynamic mechanical properties of the composites produced by the process were studied utilizing dynamic mechanical spectrometer. Results show that the composites possessed various optimum pulling rates at different die temperatures. From the DSC data analysis, swelling ratio, and mechanical properties, the optimum die temperature was determined. It was found that the mechanical properties increase with filler content for various types of filler. The increasing of mechanical properties depends on the optimum postcure temperature and time. However, the properties decreased for longer postcure times since the composite materials were degraded. The glass-transition temperature (T_g) increased slightly and the damping peak (tan δ) was broadened due to fiber reinforcement. The dynamic mechanical moduli (G′, G″) of pultruded PU composites are apparently higher than those of the matrices. The moduli (G′, G″) increase with increasing fiber and filler content, and the damping peak becomes broad. Effect of postcuring on the degree of crosslinking, T_g, and dynamic modulus will be discussed.     

Pultruded fiber-reinforced poly(methyl methacrylate) composites. I. Effect of processing parameters on mechanical properties

A feasibility study of pultrusion of fiber-reinforced thermoplastic PMMA composite has been conducted using a proprietary method. Effect of processing parameters, preparation of methyl methacrylate (MMA) prepolymer on the mechanical properties (tensile, flexural strength and modulus, impact strength, etc.) of fiber-reinforced PMMA composites by pultrusion has been studied. Processing parameters investigated included pulling rate, die temperature, postcure time and temperature, and filler content. From the study of Brookfield viscometer and FTIR spectrum the processing conditions can be defined. It was found from SEM photographs that the wetting out of fibers by PMMA resin was complete, and the fiber bundles were distributed evenly in the PMMA matrix. From the study of ¹H-NMR, GPC, and Brookfield viscometer, the conversion, molecular weight, and viscosity of MMA prepolymer data were obtained. From the DSC diagram, molecular weight measurement, and the rule of polymerization rate, the optimum die temperature was determined. It was found that the mechanical properties increase with increasing filler content and postcure temperature, and with decreasing die temperature and pulling rate.     

In situ pultrusion of urea–formaldehyde matrix composites. I. Processability,kinetic analysis,and dynamic mechanical properties

We conducted a feasibility study on the pultrusion of a glass‐fiber‐reinforced urea–formaldehyde (UF) composite using a proprietary method. The UF prepolymer synthesized in this study was prepared from blends of UF monomer and a curing agent (NH₄Cl).The process feasibility, kinetic analysis, and dynamic mechanical properties of the glass‐fiber‐reinforced UF composites by pultrusion were investigated. From investigations of the long pot life of the UF prepolymer, the high reactivity of the UF prepolymer, and excellent fiber wet‐out, we found that the UF resin showed excellent process feasibility for pultrusion. A kinetic model, dα/dt = A exp(?E/RT)α^m(1 ? α)ⁿ, is proposed to describe the curing behavior of a UF resin. Kinetic parameters for the model were obtained from dynamic differential scanning calorimetry scans with a multiple‐regression technique. The dynamic storage modulus of the pultruded‐glass‐fiber‐reinforced UF composites increased with increasing die temperature, filler content and glass‐fiber content and with decreasing pulling rate. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1242–1251, 2002     

Pultruded fiber reinforced thermoplastic poly(methyl methacrylate) composites. Part I. Correlation of processing parameters for optimizing the process

The effect of processing parameters on the properties (tensile, flexural strength and modulus and impact strength, etc.) of pultruded fiber reinforced poly(methyl methacrylate) (PMMA) composites has been studied. The processing parameters investigated included pulling rate, die temperature, and postcure. Wetting of fibers by PMMA resin was complete, and the fiber bundles were evenly distributed in the PMMA matrix. The conversion, molecular weight and viscosity of MMA prepolymer were studied by ¹H-NMR, GPC and Brookfield viscometer. The optimum die temperature was determined from DSC diagram, molecular weight measurement and from the polymerization rate. The mechanical properties increased with the increasing postcure temperature and decreasing pulling rate and die temperature.     

The development of glass fiber reinforced polystyrene for pultrusion. I: Process feasibility,dynamic mechanical properties,and postformability

A feasibility study on the pultrusion of a glass fiber reinforced polystyrene (PS) has been conducted using a proprietary method. The styrene prepolymer synthesized in this study was prepared from blends of styrene monomer and benzoyl peroxide (BPO). The process feasibility, dynamic mechanical properties, and postformability of the glass fiber reinforced PS by pultrusion have been investigated. By means of gel permeation chromatography, ¹H nuclear magnetic resonance (¹H-NMR), and a Brookfield viscometer, the molecular weight, conversion, and viscosity of the styrene prepolymer were obtained. From the investigations of the long pot life of styrene prepolymer, the high reactivity of styrene prepolymer, and excellent fiber wet-out, it was found that the PS resin showed excellent process feasibility for pultrusion. The dynamic storage modulus (E') of pultruded glass fiber reinforced PS composites increased with increasing die temperature, filler content, postcuring and glass fiber content, and with decreasing pulling rate. The composite can be postformed by thermoforming under pressure, and mechanical properties of postformed composites can be improved.     

Fiber reinforced nylon-6 composites produced by the reaction injection pultrusion process

Reaction injection pultrusion (RIP) combines the injection pultrusion process with reaction injection molding (RIM) techniques to yield one of the more novel methods of thermoplastic matrix pultrusion. An experimental set-up was designed and built to pultrude nylon-6 RIM material and continuous E-glassfiber. Well-impregnated nylon-6 composites with 66.5, 68.8, 71.1, and 73.3 vol% fiber were produced. Internal temperature profile within the die was recorded during the process, and physical properties of resulting composites were measured. This paper presents results of the effect of fiber content, die temperature profile and pulling speed variations on internal temperature profile, monomer conversion, and physical properties. The study showed that increasing pulling speed lowered both peak temperature and monomer conversion. Higher die temperatures accelerated the reaction, resulting in a higher exotherm, a higher peak temperature, and a higher monomer conversion within the range investigated. Shear strength, flexual strength, flexual modulus, and transverse tensile strength were proportional to monomer conversion. Flexual modulus increased with higher fiber content within the range observed. Data allow the proper combination of die temperature profile and pulling speed to be selected to achieve a desired level of monomer conversion and physical properties. Results of this study provide basic information required for product design with nylon-6 composites as well as tool design, selection of processing conditions, and quality control for the process.     

Mathematical model for the pultrusion of blocked PU–UP matrix composites

The thermokinetic behavior of blocked polyurethane (PU)–unsaturated polyester (UP)–based composites during the pultrusion of glass‐fiber‐reinforced composites was investigated utilizing a mathematical model that accounted for the heat transfer and heat generation during curing. The equations of continuity and energy balance, coupled with a kinetic expression for the curing system, were solved using a finite difference method to calculate the temperature profiles and conversion profiles in the thickness direction in a rectangular pultrusion die. A kinetic model, dP/dt = A exp(?E/RT)P^m(1 ? P)ⁿ, was proposed to describe the curing behavior of a blocked PU–UP resin. Kinetic parameters for the model were obtained from dynamic differential scanning calorimetry scans using a multiple regression technique, which was able to predict the effects of processing parameters on the pultrusion. The effects of processing parameters including pulling speed, die wall temperature, and die thickness on the performance of the pultrusion also were evaluated. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1996–2002, 2003     

长玻纤增强聚丙烯复合材料的制备及力学性能

使用熔融浸渍法制备了长玻璃纤维增强聚丙烯复合材料(LFTPP–G),研究了不同纤维含量、不同牵引速度及不同相容剂马来酸酐接枝聚丙烯(PP-g-MAH)添加量对复合材料力学性能的影响。结果表明,玻璃纤维在复合材料体系中起增强增韧作用,复合材料力学性能随纤维含量增加而升高;提高牵引速度可以提高生产效率,但复合材料的力学性能及纤维分散性能随之降低;相容剂PP-g-MAH的加入改善了玻璃纤维与树脂的界面结合。当使用自制的浸渍装置且玻璃纤维质量分数为50%、牵引速度为30 m/min、相容剂PP-g-MAH质量分数2%时,制得LFTPP–G具有较好的综合力学性能,其缺口冲击强度相较于纯聚丙烯树脂提高了1323%。     

Pultruded fiber reinforced thermoplastic poly(methyl methacrylate) composites. Part II: Mechanical and thermal properties

A novel process has been developed to manufacture poly(methyl methacrylate) (PMMA) pultruded parts. The mechanical and dynamic mechanical properties, environmental effects, postformability of pultruded composites and properties of various fiber (glass, carbon and Kevlar 49 aramid fiber) reinforced PMMA composites have been studied. Results show that the mechanical and thermal properties (i.e. tensile strength, flexural strength and modulus, impact strength and HDT) increase with fiber content. Kevlar fiber/PMMA composites possess the highest impact strength and HDT, while carbon fiber/PMMA composites show the highest tensile strength, tensile and flexural modulus, and glass fiber/PMMA composites show the highest flexural strength. Experimental tensile strengths of all composites except carbon fiber/PMMA composites follow the rule of mixtures. The deviation of carbon fiber/PMMA composite is due to the fiber breakage during processing. Pultruded glass fiber reinforced PMMA composites exhibit good weather resistance. They can be postformed by thermoforming, and mechanical properties can be improved by postforming. The dynamic shear storage modulus (G′) of pultruded glass fiber reinforced PMMA composites increased with decreasing pulling rate, and G′ was higher than that of pultruded Nylon 6 and polyester composites.     

玻纤及填料对拉挤制品性能影响的研究

拉挤制品性能通常以弯曲强度与剪切强度来表征。通过设计不同玻纤含量、不同纤维直径及不同填料比例的拉挤成型实验,分析了拉挤过程中玻纤含量、纤维直径和填料量三类主要影响因素对拉挤制品性能的影响,并给出了一些改进措施与建议。     

LGF增强增韧PA66汽车专用料的制备及力学性能研究

采用熔融拉挤工艺技术制备了长玻璃纤维增强增韧尼龙(PA)66粒料.实验结果表明,长玻璃纤维增强增韧PA66具有拉伸强度大、弯曲强度大、冲击强度高、成型收缩率小等优异性能,其力学性能超过短玻璃纤维增强增韧PA66的性能,达到了汽车专用料标准要求.     

Fabrication of long glass fiber reinforced polyacetal composites: Mechanical performance,microstructures, and isothermal crystallization kinetics

A thermoplastic pultrusion was carried out to prepare the long fiber reinforced thermoplastic (LFT) composites based on polyacetal (POM) matrix on the custom‐designed pultrusion equipment. The investigation on mechanical performance revealed that the POM‐based LFT composites achieved much higher tensile, flexural, and impact strength than the short glass fiber reinforced ones at the same fiber loadings. Such a promising reinforcement effect is attributed to the feature that the residual fiber length in the injection‐molded LFT products is greatly superior to that in short fiber reinforced ones. This takes full advantage of the strength of the reinforcing fiber itself. The scanning electronic microscopy demonstrated that the fiber fracture and fiber pull‐out concurred on the tensile and impact fracture surfaces, and the former preceded the latter. The isothermal crystallization kinetics of the POM‐based LFT composites was also intensively studied, and the results indicated that the crystallinity of POM domain was enhanced by the heterogeneous nucleation of glass fiber, but the crystallization rate was postponed due to the interspace restriction toward crystalline growth caused by long glass fiber. These kinetic parameters provided information on the processing conditions of POM‐based LFT composites for the injection and compression molding. POLYM. COMPOS., 36:1826–1839, 2015. © 2014 Society of Plastics Engineers     

Mechanical properties of particulate‐filler/woven‐glass‐fabric‐filled vinyl ester composites

Studies of the effect of particulate fillers on specific mechanical properties of vinyl ester epoxy (VE) reinforced with woven glass fiber composites were carried out with different filler types and particulate filler contents (1%, 3%, and 5% by weight). Two types of particulate filler were used, i.e., calcium carbonate (CC) and phenolic hollow microspheres (PHMS). The composites were prepared by using a hand lay‐up and vacuum bagging method. Woven glass fabric composites filled with particulate PHMS were observed to have better specific flexural strength and specific impact strength, as well as lower density, than those filled with particulate CC. Morphological features determined by scanning electron microscope (SEM) proved that the PHMS filler experienced good bonding in the VE matrix, a feature which contributed to the improvement in the properties of the composites. The incorporation of particulate fillers into the composites also influenced the storage modulus with a minimal effect on T_g. J. VINYL ADDIT. TECHNOL., 2010. © 2010 Society of Plastics Engineers     

碳纤维增强海因环氧树脂复合材料拉挤工艺性能研究

通过DSC分析及粘度和力学性能测试研究了海因环氧树脂/甲基六氢苯二酸酐/2-乙基-4-甲基咪唑体系的粘度特性,固化反应动力学,浇铸体及碳纤维增强拉挤成型复合材料的力学性能。结果表明,该体系在50℃下,15 h内粘度<500 mPa.s,可以满足拉挤工艺要求。其碳纤维复合材料的玻璃化温度达到206℃以上,剪切强度达到80 MPa,耐热性和力学性能良好。     

Glass fiber‐reinforced polyamide composites toughened with ABS and EPR‐g‐MA

A series of glass fiber‐reinforced rubber‐toughened nylon 6 composites was prepared. The mechanical properties and morphology of the composites toughened with ABS were investigated and compared with composites toughened with EPR‐g‐MA. A study of the mechanical properties showed that the balance of the impact strength and stiffness for both types of systems can be significantly improved by proper incorporation of glass fibers into toughened nylon 6. The differences between these two types of rubber‐toughened composites are significant at a high rubber content. However, the ductility of both composites toughened with rubber was significantly lower than that of blends without glass fiber. The relationships between rubber content, nylon 6 molecular weight, compatibilizer, processing, and mechanical properties are discussed. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 484–497, 2001     

Thermo‐physical,thermal degradation,and flexural properties of betel nut husk fiber reinforced vinyl ester composites

This study aims to investigate the thermo‐physical, mechanical, and thermal degradation properties of betel nut husk (BNH) fiber reinforced vinyl ester (VE) composites. These properties were evaluated as a function of fiber maturity, fiber content, and fiber orientation. Thermo‐physical properties were analyzed experimentally using a hot disk TPS method. The introduction of BNH was found to reduce the thermal conductivity of neat VE. The thermal conductivity and thermal diffusivity of BNH reinforced VE composites decreased with the increase in fiber content. Short fiber BNH reinforced VE composites showed the lowest thermal conductivity as compared to the unidirectional and random nonwoven composites. The TGA analysis shows lower resin transition peak for the BNH reinforced VE composites than the peak of neat VE. Fiber maturity had a notable effect on the flexural modulus of the BNH fiber reinforced VE composites. Incorporation of 10 wt% BNH fibers into the composite has increased the composites' flexural modulus by 46.37%. However, further increases in the fiber content reduced both flexural strength and modulus of the composites. POLYM. COMPOS., 37:2008–2017, 2016. © 2015 Society of Plastics Engineers     

Design and fabrication of long‐carbon‐fiber‐reinforced polyamide‐6/nickel powder composites for electromagnetic interference shielding and high mechanical performance

The long‐carbon‐fiber‐reinforced polyamide‐6/nickel powder composites were designed as electromagnetic interference (EMI) shielding materials and then were prepared through the joint processing of melt blending and thermoplastic pultrusion. The obtained composites show high conductivity and permittivity as well as a high dielectric loss with co‐addition of carbon fiber and nickel powders, which makes the resulting composites a higher level of shielding effectiveness due to the combination of conductive and magnetic fillers. The composites are capable of shielding mainly through absorption rather than reflection. On the other hand, the composites achieved significant improvements in tensile, flexural, and impact strength due to the superiority of the long‐carbon‐fiber‐reinforced technique. The residual fiber length in the injection‐molded specimens is greatly superior to the critical one predicted by the Kelly–Tyson model. This takes full advantage of the strength of the reinforcing fiber itself, thus leading to a promising reinforcement effect. The enhancement of impact toughness is due to the energy dissipation by fiber fracture as a result of long fiber effect. The morphologic investigation indicated that the fiber fracture and fiber pullout concurred on the impact and tensile fracture surfaces, and the former preceded the latter. Highlighted with both good EMI shielding properties and excellent mechanical performance, the composites designed by this work exhibit potential applications for the automotive, electronic, aerospace, and military industries. POLYM. COMPOS., 37:2705–2718, 2016. © 2015 Society of Plastics Engineers     

连续玻璃纤维增强PLA复合材料3D打印技术研究

以聚乳酸(PLA)为基体,连续玻璃纤维为增强体,采用熔融浸渍工艺制备连续玻璃纤维预浸丝,将制得的预浸丝作为3D打印耗材用于熔融沉积(FDM)的3D技术来制备连续玻璃纤维增强PLA复合材料试样,并研究了打印温度、层厚和打印速度对复合材料力学性能的影响。结果表明,当打印层厚为0. 5 mm,打印温度为230℃,打印速度为2 mm/s时,连续玻璃纤维增强PLA复合材料的弯曲性能最佳,弯曲强度和弯曲模量分别为327. 84 MPa和20. 293 GPa。综合考虑复合材料的力学性能、表面质量和尺寸稳定性,连续玻璃纤维增强PLA复合材料的最佳打印层厚为0. 5 mm,适宜的打印温度范围为200~220℃,打印速度范围为2~4 mm/s。     

Interpenetrating polymer networks of polyurethane and furfuryl alcohol,IIa. Processability and properties of pultruded fiber-reinforced composites

A feasibility study of pultrusion of fiber-reinforced polyurethane/furfuryl alcohol (PU/FA) interpenetrating polymer/network IPN composites has been made. From the viscosity study, it was found that the pot life of the PU/FA IPN prepolymers increased with PU content and showed high reactivity at elevated temperature. It was confirmed from the morphological study that the wetting of fibers by the PU/FA IPN resins was improved with PU content. The appearance of the tensile failure surfaces of the pultruded glass fiber-reinforced PU/FA IPN composites showed “hackle patterns” for PU contents below 15 phr. The mechanical property study shows that the tensile strength of pultruded PU/FA IPN composites is the highest when the PU content is 5 phr. However, the flexural strength, flexural modulus and HDT decreased with PU content. The mechanical properties of various fiber-reinforced (glass, carbon, and Kevlar 49 aramid fiber) pultruded PU/FA IPN composites increased with fiber volume content.