共查询到20条相似文献,搜索用时 89 毫秒
1.
一、什么是个人通信?当前国际上对个人通信的定义提法各异,尚未统一,但有一点是明确的,即个人通信就是要求在任何时候、任何地点与任何人都能进行各种业务(语音、数据、视频)的通信.目前,CCITT正在研究制定通用个人通信(UPT)国际标准,并已初步提出了对UPT的一些明确要求,这些要求的中心问题就是UPT使用者都有一个“个人号码”.UPT使用者根据这一个人号码可以预订各种业务,可在任何固定的或移动的终端上随时随地发出或接受呼叫,并可在跨越多种公用电信网的情况下实现个人通信.而对于通信系统来说,它能根据这一个人号码将通信“服务到个人”,井且所有计费与记帐都根据个人号码进行,与所用的不同终端无关. 相似文献
2.
3.
4.
5.
6.
7.
CDMA2000 分组域核心网移动IP技术 总被引:1,自引:0,他引:1
移动IP技术为CDMA2000 系统中的一种基本接入技术.分析了移动IP技术网络架构,介绍了移动IP网络部署下的几种关键技术.为了使只支持简单IP的终端使用移动IP业务,引入了代理移动IP技术.内容计费业务作为一种灵活的计费方式,同样也可以应用在CDMA2000分组网络中. 相似文献
8.
9.
10.
信息名址计费业务是信息名址平台的重要组成部分,它的业务逻辑与移动互联网的业务逻辑密切相关。本文介绍了在移动梦网业务基础上的信息名址计费方案和计费逻辑。文中特别对计费过程中由于账目不统一产生的误差进行了深入的探讨,并提供了一种可行的解决方案。 相似文献
11.
中国智能网UPT业务计费方法的研究 总被引:2,自引:0,他引:2
本文介绍中国智能网的组网方案,UPT业务在我国划分为三个阶段,根据三个阶段中可能的承载连接对UPT业务的分离计费方案进行讨论,指出了目前我国采用的UPT计费方案对用户的不合理性 相似文献
12.
论述了通信行业使用的阀控式密封铅酸蓄电池(VRLA)工作原理和性能特点,以及它的四种充电方式:浮充,均充,补充充电,循环充电;通过容量测试对蓄电池容量进行评价,并阐述了影响蓄电池容量的因素,提出了维护工作中的对策。 相似文献
13.
电池充电控制技术的研究 总被引:4,自引:0,他引:4
本文主要介绍镍镉电池、镍氢电池和锂离子电池的充电方式,并且结合各类电池自身的特点给出了判断其是否充满的方法。然后,分析了镍类电池的特殊充电曲线、锂离子电池恒压阶段的电压补偿,使充电控制更准确、更实用。评把综合考虑时间控制、电压控制和温度控制的充电控制技术,成功应用于智能充电机设计中。 相似文献
14.
研究了铅酸蓄电池的反应原理和特点,充电过程中的极化现象,分析了蓄电池常规充电、快速充电、智能充电的原理和特点,阐述了蓄电池内阻的不同测量方法。 相似文献
15.
16.
就 S1 2 40维护过程中的计费文件丢失情况 ,通过分析其相关原理及数据结构 ,总结出尽可能恢复计费记录的一套方法。 相似文献
17.
Zeinab Rezaeifar Rasheed Hussain Sangjin Kim Heekuck Oh 《Wireless Personal Communications》2017,92(3):1011-1028
Electric vehicles (EVs) can be considered as a revolution in the combustion industry with significant improvement in fuel utilization and decrease in pollution compared to combustion engines. However, by decreasing the size of the battery to reduce the cost, the frequency of charging EVs in a day increases. Therefore, to reduce the downtime required for charging EVs, wireless charging on the move can be an effective solution. In such a situation, paying for wireless charging on the move is an important issue. However, it can endanger the location privacy of users, since the EVs need to charge frequently in a day. In this paper, we first explain different methods of payment and problems with such payment methods in the case of wireless charging on the move. Then, we propose an efficient payment method based on ‘tokens’ for wireless charging on the move, which minimizes the communications between service providers and users during the charging process. The proposed scheme prevents users and service providers from cheating, and it is robust to support different values for the price. Finally, we compare it with other payment methods that have been proposed for plug-in electric vehicles. 相似文献
18.
本文讨论了谐振充电式重复率固体激光电源中存在的控制充电电压及防止“连通现象”出现的两个问题,并提出了有效的克服方法。 相似文献
19.
20.
I-Yin Li Jean-Fu Kiang 《Display Technology, Journal of》2008,4(2):211-217
A new power-saving design using charge recycling technique on the pixel level is proposed. Design constraints are derived and design examples are demonstrated. Compared with conventional charging methods, this method consumes only half the power, the charging speed is faster and the aperture ratio is similar. 相似文献