Effect of MgF2 and Al2O3 supports on the structure and catalytic activity of copper–manganese oxide catalysts

Structure and catalytic activity of double copper–manganese oxide catalysts supported on MgF₂ and Al₂O₃ have been studied. All samples were calcined at 400 °C and those supported on Al₂O₃ also at 550 and 950 °C. The properties of surface species have been characterized by low temperature adsorption of nitrogen, XRD and TPR-H₂. The catalytic activities have been tested in low-temperature CO oxidation and in NO reduction by propene. The supported oxides react with each other during calcination to form CuMn₂O₄ spinel. The spinel seems to be responsible for the catalytic activity of the double copper–manganese catalysts. The temperature of calcination changes the strength of interaction between the active phase and the supports influencing the catalytic activity.     

Catalytic Activities of Al2O3-promoted NiSO4/TiO2 for Acid Catalysis

A series of catalysts, NiSO₄/Al₂O₃–TiO₂, for acid catalysis was prepared by the impregnation method, where support, Al₂O₃–TiO₂ was prepared by the coprecipitation method using a mixed aqueous solution of titanium tetrachloride and aluminum nitrate solution followed by adding an aqueous ammonia solution. The addition of nickel sulfate (or Al₂O₃) to TiO₂ shifted the phase transition of TiO₂ from amorphous to anatase to higher temperature because of the interaction between nickel sulfate (or Al₂O₃) and TiO₂. 15-NiSO₄/5-Al₂O₃–TiO₂ containing 15 wt% NiSO₄ and 5 mol% Al₂O₃, and calcined at 400°C exhibited maximum catalytic activities for both reactions, 2-propanol dehydration and cumene dealkylation. The catalytic activities for both reactions were correlated with the acidity of catalysts measured by the ammonia chemisorption method. The charge transfer from Ti atoms to the neighboring Al atoms strengthens the Al–O bond between Al and the surface sulfate species. The addition of Al₂O₃ up to 5 mol% enhanced the acidity, thermal property, and catalytic activities of NiSO₄/Al₂O₃–TiO₂ gradually due to the interaction between Al₂O₃ and TiO₂ and consequent formation of Al–O–Ti bond.     

Effect of Modifiers on the Reactivity of Cr2O3/Al2O3 and Cr2O3/TiO2 Catalysts for the Oxidative Dehydrogenation of Propane

Chromium oxide supported on alumina and titania supports was modified with oxides of sodium, vanadium and molybdenum. The modified and unmodified chromium oxide catalysts were characterized by several techniques. The presence of surface chromium oxide and surface molybdenum and vanadium oxide species was detected in the unmodified and molybdenum and vanadium oxide modified supported chromium oxide catalysts. The reducibility (T_max and H/Cr ratio) of the surface chromium species was not affected for the vanadium and molybdenum oxide modified catalysts; however, the reducibility changed noticeably for sodium modified supported chromium oxide catalysts. Studies of the reactivity of the ODH of propane revealed the effect of modifiers on the reactivity properties of the surface chromium oxide species. The activity and propene selectivity decreased for sodium modified supported chromium oxide catalysts. However, the activity increased for vanadium oxide modified catalysts and was similar for molybdenum oxide modified catalysts irrespective of the support. The propene selectivity was higher for molybdenum oxide modified chromium oxide catalysts. However, the propene selectivity for vanadium oxide modified catalysts depends on the support since it appears that the inherent selectivity of the surface vanadium oxide species is reflected.     

Reactivity of V2O5/MgF2 Catalysts for the Selective Ammoxidation of 3-Picoline

V₂O₅/MgF₂ catalysts with V₂O₅ contents ranging from 2.1 to 15.7 wt% were prepared, and the influence of the V₂O₅ content of the V₂O₅/MgF₂ catalyst on the structure and activity for the ammoxidation of 3-picoline was investigated. XRD data indicate that V₂O₅ is in a highly dispersed state though segregation of V₂O₅ into tiny crystallites occurs at and above 8 wt% V₂O₅. The 3-picoline ammoxidation activity increased with an increase in V₂O₅ content due not only to the species arising out of interaction of V₂O₅ and MgF₂, but also to the presence of V₂O₅ microcrystals in the catalysts.     

Water Denitration over a Pd–Sn/Al2O3 Catalyst

Bimetallic Pd–Sn catalysts were synthesized by incipient-wetness impregnation of the metals on alumina and employed for the reduction of nitrates from aqueous solutions. The catalysts were characterized by FTIR spectroscopy of adsorbed CO, X-ray diffraction (XRD), transmission electron microscopy (TEM), and H₂ chemisorption. The influence of the metal ratio was evaluated in reaction measurements. The bimetallic Pd–Sn catalysts exhibited high selectivity for nitrate removal forming less NO₂⁻ and NH₄⁺ than the Pd–Cu catalysts.     

Novel Sn–Ce/Al2O3 Catalyst for the Selective Catalytic Reduction of NOx Under Lean Conditions

Effect of additives, Ce and Mn, on the catalytic performance of Sn/Al₂O₃ catalyst prepared by sol–gel method for the selective reduction of NO_x with propene under lean conditions was studied. Sn–Ce/Al₂O₃ catalysts exhibited higher activity than Sn/Al₂O₃ catalyst and the optimum Ce loading is 0.5–1%. The promoting effect of Ce is to enhance the oxidation of NO to NO₂ and facilitate the activation of propene, both of which are important steps for the NO_x reduction. The presence of oxygen contributes to the oxidation of NO and shows a promoting effect.     

Investigation of CH4 Reforming with CO2 on Meso-Porous Al2O3-Supported Ni Catalyst

Meso-porous Al₂O₃-supported Ni catalysts exhibited the highest activity, stability and excellent coke-resistance ability for CH₄ reforming with CO₂ among several oxide-supported Ni catalysts (meso-porous Al₂O₃ (Yas1-2, Yas3-8), -Al₂O₃, -Al₂O₃, SiO₂, MgO, La₂O₃, CeO₂ and ZrO₂). The properties of deposited carbons depended on the properties of the supports, and on the meso-porous Al₂O₃-supported Ni catalyst, only the intermediate carbon of the reforming reaction formed. XRD and H₂-TPR analysis found that mainly spinel NiAl₂O₄ formed in meso-porous Al₂O₃ and -Al₂O₃-supported catalysts, while only NiO was detected in -Al₂O₃, SiO₂, CeO₂, La₂O₃ and ZrO₂ supports. The strong interaction between Ni and meso-porous Al₂O₃ improved the dispersion of Ni, retarded its sintering and improved the activated adsorption of CO₂. The coking reaction via CH₄ temperature-programed decomposition indicated that meso-porous Al₂O₃-supported Ni catalysts were less active for carbon formation by CH₄ decomposition than Ni/-Al₂O₃ and Ni/-Al₂O₃.     

Preparation and characterisation of closed-pore Al2O3-MgAl2O4 refractory aggregate utilising superplasticity

ABSTRACT

A novel high closed porosity Al₂O₃-MgAl₂O₄ refractory aggregate has been successfully fabricated by utilising superplasticity with Al₂O₃ and MgO as raw materials, SiC as high temperature pore-forming agent. The effects of the addition amounts of MgO and SiC on porosity, sintering behaviours, phase composition, pore size distribution and microstructure of the refractory aggregate have been investigated. The formation mechanism of the closed pore in the refractory aggregate has been discussed. The results showed that the MgO can improve the superplastic deformation ability of Al₂O₃-based ceramic at high temperature. With the content of MgO and SiC increased, the closed porosity and the pore size increased. The oxidation of SiC improved the sinterability of materials at the initial stage of sintering, and then the released gases due to the further oxidation of SiC promoted the formation of closed pores by motivating the superplastic deformation ability of Al₂O₃-based materials.     

Combustion of Methane at Low Temperature over Pd and Pt Catalysts Supported on Al2O3, SnO2 and Al2O3-Grafted SnO2

Pd and Pt catalysts supported on alumina, tin(IV) oxide and tin(IV) oxide grafted on alumina were prepared, characterised and tested with respect to the low-temperature combustion of methane after reduction in H₂ and ageing under reactants at 600°C. In the case of Pd, the use of SnO₂ or SnO₂-based supports led to catalysts slightly less active than Pd/Al₂O₃. In contrast, SnO₂ was found to strongly promote the oxidation of methane over Pt catalysts with respect to Pt/Al₂O₃, even after ageing under reactants. When Pt was supported on SnO₂ grafted on Al₂O₃, the activity was found at most similar to or, after ageing, lower than Pt/Al₂O₃. This negative effect was discussed, being partly related to the sintering of SnO₂ under reactants observed by FTIR and XRD.     

Methanobactin-Mediated Synthesis of Gold Nanoparticles Supported over Al2O3 toward an Efficient Catalyst for Glucose Oxidation

Methanobactin (Mb) is a copper-binding peptide that appears to function as an agent for copper sequestration and uptake in methanotrophs. Mb can also bind and reduce Au(III) to Au(0). In this paper, Au/Al₂O₃ catalysts prepared by a novel incipient wetness-Mb-mediated bioreduction method were used for glucose oxidation. The catalysts were characterized, and the analysis revealed that very small gold nanoparticles with a particle size <4 nm were prepared by the incipient wetness-Mb-mediated bioreduction method, even at 1.0% Au loading (w/w). The influence of Au loading, calcination temperature and calcination time on the specific activity of Au/Al₂O₃ catalysts was systematically investigated. Experimental results showed that decomposing the Mb molecules properly by calcinations can enhance the specific activity of Au/Al₂O₃ catalysts, though they acted as reductant and protective agents during the catalyst preparation. Au/Al₂O₃ catalysts synthesized by the method exhibited optimum specific activity under operational synthesis conditions of Au loading of 1.0 wt % and calcined at 450 °C for 2 h. The catalysts were reused eight times, without a significant decrease in specific activity. To our knowledge, this is the first attempt at the preparation of Au/Al₂O₃ catalysts by Mb-mediated in situ synthesis of gold nanoparticles.     

Pulse studies of CH4 interaction with NiO/Al2O3 catalysts

Pulse studies of the interaction of CH₄ and NiO/Al₂O₃ catalysts at 500°C indicate that CH₄ adsorption on reduced nickel sites is a key step for CH₄ oxidative conversion. On an oxygen-rich surface, CH₄ conversion is low and the selectivity of CO₂ is higher than that of CO. With the consumption of surface oxygen, CO selectivity increases while the CO₂ selectivity falls. The conversion of CH₄ is small at 500°C when a pulse of CH₄/O₂ (CH₄O₂=21) is introduced to the partially reduced catalyst, indicating that CH₄ and O₂ adsorption are competitive steps and the adsorption of O₂ is more favorable than CH₄ adsorption     

High performances of Pt-K/Al2O3 versus Pt-Ba/Al2O3 LNT catalysts in the simultaneous removal of NO x and soot

The potentiality of a Pt-K/Al₂O₃ catalyst in the simultaneous removal of particulate matter (soot) and NO _x is investigated in this work by means of Temperature Programmed Oxidation (TPO) experiments and Transient Response Method (TRM), and compared with Pt-Ba/Al₂O₃. The results point out the higher performances of K-based sample in the soot combustion as compared to the Ba-based catalyst, and similar behaviour in the NO _x -storage.     

Gold supported CeO2/Al2O3 catalysts for CO oxidation: influence of the ceria phase

A series of low loading gold supported ceria/alumina catalysts have been prepared by the deposition–precipitation method, varying the pH of the synthesis. The catalysts were characterised by means of XRD, TEM, S_BET, XRF and UV–Vis techniques, and their catalytic activity towards CO oxidation in the absence and in presence of water in the stream, were tested. It has been found that in this low loading gold catalysts, where the metallic particles are far away one from another and the oxygen transportation is not the limiting step of the reaction, the electronic properties of the ceria phase and the structure of the metal-support perimeter more than the diameter of the gold nanoparticles is the determinant factor in the catalytic performances of the solid.     

Surface acidity investigation of A12O3 supports and Ni-Mo/Al2O3 catalysts using the temperature-programmed desorption oftert-butylamine

The relative acid site densities of a range of Ni-Mo/Al₂O₃ based catalysts were measured by the temperature-programmed desorption of tert-butylamine. The catalysts investigated possessed different surface areas and active species loadings. The effect of active species impregnation on the acidity of blank aluminas was also determined. Similarly the effect of sulphiding on catalyst acidity was also addressed.     

Effects of MgO promoter on properties of Ni/Al2O3 catalysts for partial oxidation of methane to syngas

The effects of MgO promoter on the physicochemical properties and catalytic performance of Ni/Al₂O₃ catalysts for the partial oxidation of methane to syngas were studied by means of BET, XRD, H₂-TPR, TEM and performance evaluation. It was found that the MgO promoter benefited from the uniformity of nickel species in the catalysts, inhibited the formation of NiAl₂O₄ spinel and improved the interaction between nickel species and support. These results were related to the formation of NiO-MgO solid solution and MgAl₂O₄ spinel. Moreover, for the catalysts with a proper amount of MgO promoter, the nickel dispersiveness was enhanced, therefore making their catalytic performance in methane partial oxidation improved. However, the excessive MgO promoter exerted a negative effect on the catalytic performance. Meanwhile, the basicity of MgO promoted the reversed water-gas shift reaction, which led to an increase in CO selectivity and a decrease in H₂ selectivity. The suitable content of MgO promoter in Ni/Al₂O₃ catalyst was ∼7 wt-%. Translated from Journal of Fuel Chemistry and Technology, 2006, 34(4): 450–455 [译自: 燃料化学学报]     

Metal oxide catalysts for DME steam reforming: Ga2O3 and Ga2O3–Al2O3 catalysts

The steam reforming of dimethyl ether (DME) was performed on Ga₂O₃–Al₂O₃ mixed oxides prepared by sol–gel method. Ga₂O₃ significantly affects the catalytic performance with respect to the DME conversion and H₂ yield. The catalytic activity increases with the Ga concentration in Ga₂O₃–Al₂O₃ mixed oxides. It is very interesting that without the aid of an additional transition metal component, Ga₂O₃ and Ga₂O₃ containing Al₂O₃ mixed oxide system exhibit good activity in the reforming reaction. To the best of our knowledge, this is the first report that reveals the reforming ability of Ga₂O₃ for the production of H₂ from DME and/or methanol.     

Mechanistic Insight in the Ethane Dehydrogenation Reaction over Cr/Al2O3 Catalysts

A Cr/Al₂O₃ alkane dehydrogenation catalyst exhibits a maximum in ethylene yield during an ethane dehydrogenation cycle. Isotopic labelling experiments with monolabelled ¹³C-ethane and deuterium were used to elucidate whether the initial activity increase could be due to formation of an active, larger hydrocarbon intermediate on the surface. The results strongly indicate that this is not the case, and instead point to a traditional reaction cycle involving adsorption of ethane to form an ethyl species, followed by desorption of ethene and hydrogen. Transient kinetic data suggest that ethane adsorption is the rate-determining step of reaction.     

Surface Functionalization of Al2O3 Nanoparticles with Biocompatible Modifiers,Preparation and Characterization of Poly(Vinyl Pyrrolidone)/Modified Al2O3 Nanocomposites

In this present investigation, for increasing compatibility between nanoparticles and polymer matrix as well as preventing of aggregation, surface modification of aluminum oxide nanoparticles was performed with citric acid (CA) and ascorbic acid as biosafe and environmentally friendly modifier agents. For fabrication of nanocomposites, different contents (3, 5, 7?wt%) of nanoparticles were incorporated into the poly(vinyl pyrrolidone) matrix by ultrasonication technique. Transmission electron microscopy images of nanocomposites show a good dispersion of nanoparticles into the polymer matrix. Thermogravimetric analysis results show that the thermal stability of the nanocomposites shifted to higher temperature in comparison with the neat polymer matrix.     

Stable carbon dioxide reforming of methane over modified Ni/Al2O3 catalysts

CO₂ reforming of methane was studied over modified Ni/Al₂O₃ catalysts. The metal modifiers were Co, Cu, Zr, Mn, Mo, Ti, Ag and Sn. Relative to unmodified Ni/Al₂O₃, catalysts modified with Co, Cu and Zr showed slightly improved activity, while other promoters reduced the activity of CO₂ reforming. Mn-promoted catalyst showed a remarkable reduction in coke deposition, while entailing only a small reduction in catalytic activity compared to unmodified catalyst. The catalysts prepared at high calcination temperatures showed higher activity than those prepared at low calcination temperature. The Mn-promoted catalyst showed very low coke deposition even in the absence of diluent gas and the activity changed only slightly during 100 h operation. This revised version was published online in July 2006 with corrections to the Cover Date.     

Influence of Al2O3 support on the activity of Ag/Al2O3 catalysts for SCR of NO with decane

The role of the Al₂O₃ support on the activity of supported Ag catalyst towards the selective catalytic reduction (SCR) of NO with decane is elucidated. A series of Ag/Al₂O₃ catalysts were prepared by impregnation method and characterized by N₂ pore size distribution, XRD, UV–Vis, in-situ FT-IR and acidity measurement by NH₃ and pyridine adsorption. The catalytic activity differences of Ag/Al₂O₃ are correlated with different properties of Al₂O₃ supports and the active Ag species formed. 4wt% Ag supported on sol-gel prepared Al₂O₃ (Ag/Al₂O₃ (SG), showed higher NO _x conversion (65% at 400 °C), compared with the respective catalysts made from commercial Al₂O₃ (Ag/Al₂O₃ (GB), Ag/Al₂O₃ (ALO), (∼26 and 7% at 400 °C). The higher surface area, acidity and pore size distribution in sol–gel prepared Al₂O₃ (SG) results in higher NO and hydrocarbon conversion. Based on the UV–vis characterization, the activity of NO reduction is correlated to the presence of Ag_n^δ+ clusters and acidity of Al₂O₃ support was found to be one of the important parameter in promoting the formation and stabilization of Ag_n^δ+ clusters. Furthermore from pyridine adsorption results, presence of more number of Bronsted acid sites in Ag/Al₂O₃ (SG) is confirmed, which could also contribute to low temperature hydrocarbon activation and improve NO conversion. In situ FT-IR measurements revealed the higher rate of –CN and –NCO intermediate species formation over 4wt% Ag/Al₂O₃ (SG). We conclude that the physico–chemical properties of Al₂O₃ play a crucial role in NO _x conversion over Ag/Al₂O₃ catalysts. Thus, the activity of the Ag/Al₂O₃ catalyst can be tailored by using a proper type of Al₂O₃ support.