A method for fully automatic operation of domestic heating

Complex, inconvenient and badly arranged push buttons and menus on domestic heating controls often cause users to enter unsuitable settings that result in impaired comfort and poor operating efficiency. This paper proposes a novel approach to the human interface of home heating systems that greatly simplifies the input required from the user. Time settings are derived automatically from electricity consumption and hot water use, also a temperature set point is provided that adapts to user activity levels and external temperature. Practical results from a prototype control system incorporating these methods are reported, showing useful energy savings. It is argued that this increased automation of control allows the benefits of low carbon technologies such as micro-combined heat and power, and solar hot water heating, to be fully exploited.     

Evaluating the potential impact of global warming on the UAE residential buildings – A contribution to reduce the CO2 emissions

There is significant evidence that the world is warming. The International Panel of Climate Change stated that there would be a steady increase in the ambient temperature during the end of the 21st century. This increase will impact the built environment, particularly the requirements of energy used for air-conditioning buildings. This paper discusses issues related to the potential impact of global warming on air-conditioning energy use in the hot climate of the United Arab Emirates. Al-Ain city was chosen for this study. Simulation studies and energy analysis were employed to investigate the energy consumption of buildings and the most effective measures to cope with this impact under different climate scenarios. The paper focuses on residential buildings and concludes that global warming is likely to increase the energy used for cooling buildings by 23.5% if Al-Ain city warms by 5.9 °C. The net CO₂ emissions could increase at around 5.4% over the next few decades. The simulation results show that the energy design measures such as thermal insulation and thermal mass are important to cope with global warming, while window area and glazing system are beneficial and sensitive to climate change, whereas the shading devices are moderate as a building CO₂ emissions saver and insensitive to global warming.     

A computational method to assess the impact of urban climate on buildings using modeled climatic data

In the last decade a lot of research effort has been spent on identifying the effect of the urban climate on the energy performance of buildings and HVAC (heating ventilation and air conditioning) systems. In this paper a methodology is proposed to assess that effect by the exclusive use of modeled data. Particularly, by using a downscaling modeling procedure a process for the generation of weather files for energy calculations is achieved. From a non-hydrostatic weather model the urban climate of the city of Lisbon is simulated and via a weather generator climatic data files for the buildings’ simulation software are derived. The results on the energy behavior of a reference test cell for different sites inside the city of Lisbon are presented.     

Greenhouse gas emissions in building construction: A case study of One Peking in Hong Kong

The construction of buildings has a very important impact on the environment, and the process of manufacturing and transporting of building materials, and installing and constructing of buildings consumes great energy and emits large quantity of greenhouse gas (GHG). The present paper defines four sources of GHG emissions in building construction, which are: manufacture and transportation of building materials; energy consumption of construction equipment; energy consumption for processing resources; and disposal of construction waste, and then establishes the calculation method of GHG emissions. This paper presents a case study of GHG emissions in building construction in Hong Kong. The results show that 82–87% of the total GHG emissions are from the embodied GHG emissions of building materials, 6–8% are from the transportation of building materials, and 6–9% are due to the energy consumption of construction equipment. The results also indicate that embodied GHG emissions of concrete and reinforced steel account for 94–95% of those of all building materials, and thus the use of recycled building materials, especially reinforced steel, would decrease the GHG emissions by a considerable amount.     

A study on a porous residential building model in hot and humid regions: Part 1—the natural ventilation performance and the cooling load reduction effect of the building model

This study targets environmental load reduction in hot and humid regions. It reveals the effects that porous residential buildings have on the natural ventilation performance and, consequently, the cooling load reduction. Two residential building models, namely a model with a void ratio of 0% and a model with a void ratio of 50%, are evaluated using computational fluid dynamics (CFD) analysis and thermal and airflow network analysis. The analysis on components of the heat load indicates that improvements in the natural ventilation performance would significantly reduce the cooling load.     

浅谈建筑节能在我国的发展现状及前景分析

介绍了建筑节能的概念,探讨了建筑节能的重要性,指出建筑节能是社会发展的需要,能够减轻环境污染,促进建筑业发展,通过总结我国近几年来建筑节能工作的进展情况,对我国建筑节能工作的发展前景进行了分析,以期促进我国建筑节能工作。     

A review of bottom-up building stock models for energy consumption in the residential sector

Efficient and rational implementation of building stock CO₂ emission reduction strategies and policies requires the application of comprehensive building stock models that have the ability to: (a) estimate the baseline energy demand of the existing building stock, (b) explore the technical and economic effects of different CO₂ emission reduction strategies over time, including the impact of new technologies, and (c) to identify the effect of emission reduction strategies on indoor environmental quality.     

Adaptation behaviours across ecosystems under global warming: A spatial micro‐econometric model of the rural economy in South America*

This paper develops a spatial rural economy model of adaptation to climate change that accounts for a multitude of rural enterprises across a diversity of ecosystems in South America using household surveys. We model adoptions of crops, livestock, and forests. Both specialized and diversified enterprises are modelled. This paper finds that livestock, forests, and a diversification into crops, livestock, and forests are key adaptation strategies. Under the UKMO (United Kingdom Meteorological Office) scenario, a livestock‐only enterprise would expand by 4 per cent, a crops‐livestock‐forests by 3 per cent, and a forests‐only by 3 per cent. Adaptation behaviours are closely tied with ecosystem changes under global warming. A livestock‐only would increase especially in the grasslands. A crops‐livestock‐forests enterprise expands into xeromorphic forests. A crops‐livestock expands in Andean grasslands and tall grasslands. A forests‐only expands in the coasts and woody zones. A crops‐only enterprise decreases across South America. Resumen Utilizando encuestas a hogares, en este artículo se desarrolla un modelo espacial de economía rural para la adaptación al cambio climático, con la capacidad de representar una gran cantidad de empresas rurales dentro de una diversidad de ecosistemas en América del Sur. Se modeliza la adopción de cultivos, ganado y bosques. Se modelizan tanto empresas especializadas como diversificadas. El artículo encontró que el ganado, los bosques, y una diversificación en cuanto a cultivos, ganado y bosques son estrategias claves de adaptación. Bajo un escenario propuesto por la Oficina Meteorológica del Reino Unido (UKMO, siglas en inglés), una explotación dedicada solamente a la ganadería aumentaría en un 4 por ciento, una dedicada a cultivos‐ganadería‐bosques un 3 por ciento, y una dedicada exclusivamente a bosques un 3 por ciento. Los comportamientos para la adaptación están estrechamente ligados a cambios en los ecosistemas debidos al calentamiento global. Una explotación exclusivamente ganadera aumentaría especialmente en el ecosistema de pastizal. Una explotación de cultivos‐ganadería‐bosques podría expandir en bosques xeromórficos. Una explotación basada en cultivos‐ganado expandiría en áreas de pastizales Andinos y pastizal alto. Las explotaciones basadas solamente en bosque expandirían en las costas y zonas boscosas. Una explotación exclusivamente de cultivos disminuiría en América del Sur.      

Embodied and operational carbon dioxide emissions from housing: A case study on the effects of thermal mass and climate change

A 100-year lifecycle carbon dioxide (CO₂) emissions analysis is reported for a two-bedroom, 65 m² floor area, semi-detached house in south-east England. How the balance between the embodied (ECO₂) and operational CO₂ emissions of the building are affected by the inclusion of thermal mass and the impacts of climate change is quantified. Four ‘weights’ of thermal mass were considered, ranging from lightweight timber frame to very heavyweight concrete construction. For each case, total ECO₂ quantities were calculated and predictions for operational CO₂ emissions obtained from a 100-year dynamic thermal modelling simulation under a medium-high emissions climate change scenario for south-east England. At the start of the lifecycle, the dwellings were passively cooled in summer, but air conditioning was installed when overheating reached a certain threshold. The inclusion of thermal mass delayed the year in the lifecycle when this occurred, due to the better passive control of summertime overheating. Operational heating and cooling energy needs were also found to decrease with increasing thermal mass due to the beneficial effects of fabric energy storage. The calculated initial ECO₂ was higher in the heavier weight cases, by up to 15% (4.93 t) of the lightweight case value, but these difference were offset early in the lifecycle due to the savings in operational CO₂ emissions, with total savings of up to 17% (35.7 t) in lifecycle CO₂ found for the heaviest weight case.     

Legal approval of building innovations in Australia — A key to deliverance from evil for the global village?

Hugh Knox's paper describes accreditation as an essential part of building regulation in Australia. The paper was presented at the CIB Congress in a session entitled 'Building regulations: a necessary evil' but a successful experiment carried out in Australia showed that regulations and standards can deliver significant benefits rather than obstruction. Accreditation can be the catalyst that exorcises the 'evil'.     

Efficacy of expert system technology for the diagnosis of building defects — A case study

Development of so-called expert systems shells has made it possible for professionals uninitiated in the use of logic programming to develop expert systems using these shells. The authors confirm that this technology must be used with care in building diagnostic work.