共查询到20条相似文献,搜索用时 78 毫秒
1.
3.
4.
采用低温等离子体辉光放电技术,用含氟有机单体在硅太阳电池表面聚合成膜。测定膜的光电性能和反射率证实:有膜电池的短路电流、光电转换效率及光谱响应都有明显增加,反射率绝对值降低2%左右,膜为非晶结构。此外,还研究了成膜工艺因素和膜电池性能的关系。 相似文献
5.
利用原子转移自由基聚合(ATRP)法合成了丙烯酸丁酯-甲基丙烯酸六氟丁酯嵌段共聚物(PBA-b-PHFBMA),并以核磁共振谱和凝胶渗透色谱对共聚物进行了表征。将制备的含氟嵌段共聚物应用于丙烯酸酯涂料树脂,对其性能进行了研究。结果表明,在丙烯酸酯树脂中加入含氟嵌段共聚物后,树脂的表面性能及耐老化性能有了明显的提高。含氟嵌段共聚物的加入量在10%以上时,丙烯酸酯树脂的表面接触角可从73°提高到90°以上;经紫外光加速老化1700h后,树脂的保光率达90%以上。且含氟嵌段共聚物的加入并不影响丙烯酸酯树脂的其它漆膜性能。 相似文献
6.
通过聚合物分子设计,采用普通乳液共聚和种子乳液共聚两种技术路线,合成了分子结构符合理论设计要求、稳定性良好的水性含氟聚合物.探索了含氟聚合物乳液的合成技术,包括单体和乳化剂的选择及配比,聚合过程中各工艺条件的选择和控制等;系统地研究了单体配比和合成工艺对其外观、含氟量、固含量、黏度、粒径、稳定性等主要性能的影响,分析了产生影响的原因,并对两种不同的技术路线合成的含氟乳液的性能进行了比较;通过红外光谱、GPC及透射电镜等手段对水性含氟聚合物的分子结构进行了表征.以此为基料制备了水性含氟涂料,并考察了其综合性能.结果表明:其力学性能达到:附着力1级,铅笔硬度4 H,在5%HCl溶液中耐酸性达672 h,在5%NaOH溶液中耐碱性达336 h,性能有所提高. 相似文献
7.
本文介绍了以TFDB二胺为基础同6FDA、DMDA二酐聚合的均聚和共聚的含氟PI的特性,并研究了它们的组成与其性能之间的关系。均聚和共聚含氟PI的低的光损耗和能控制的折射率在用于制作光电元器件中是最重要的特性,特别在波长为近红外区为13μm或155μm的电信通讯中。 相似文献
8.
含氟废气是主要的大气污染物之一,对人和动物均有巨大危害。本文阐述了含氟废气的产生及危害,系统介绍了含氟废气的处理方法,着重介绍了磷肥工业及玻璃建材业对含氟废气的两种处理装置。 相似文献
9.
液膜法处理高氟废水研究 总被引:10,自引:0,他引:10
利用N205-N1923-煤油液膜体系,CaCl2溶液作内相,对高氟废水的处理进行了研究。利用正交实验确定了影响最大的因素,并研究了各种因素对处理的影响。经30min处理,外相F^-浓度可由0.500g/L降至0.010g/L以下,可达到工业排放标准。 相似文献
10.
氟聚合物表面接触角滞后的研究 总被引:3,自引:0,他引:3
研究了几种含氟聚合物粉末和60Co辐照PTFE粉末压块的表面粗糙度以及辐照剂量对接触角滞后的影响,得出了辐照PTFE粉末的接触角滞后随粗糙度和辐照剂量的增加而下降。PTFE粉末辐照表面处理剂量在2×103~2×104Gy时,其使PTFE表面的性质发生了很大变化,而PTFE本体性能改变较小。 相似文献
11.
12.
13.
Polymer is an important constituent of polymer gel electrolytes along with salt and solvent. The salt provides ions for conduction
and the solvent helps in the dissolution of the salt and also provides the medium for ion conduction. Although the polymer
added provides mechanical stability to the electrolytes yet its effect on the conductivity behaviour of gel electrolytes as
well as the interaction of polymer with salt and solvent has not been conclusively established. The conductivity of lithium
ion conducting polymer gel electrolytes decreases with the addition of polymer whereas in the case of proton conducting polymer
gel electrolytes an increase in conductivity has been observed with polymer addition. This has been explained to be due to
the role of polymer in increasing viscosity and carrier concentration in these gel electrolytes. 相似文献
14.
聚合物砂浆的研究进展 总被引:2,自引:0,他引:2
综合介绍了国内外聚合物砂浆的发展现状、分类与性质.与普通砂浆相比,聚合物砂浆具有许多优良的性能,因此研究和发展聚合物砂浆具有现实意义.探讨了聚合物砂浆的作用机理以及应用,介绍了聚合物砂浆在应用中存在的问题,并据此对聚合物砂浆的应用进行了展望. 相似文献
15.
综述了聚合物固体粉碎过程中产生的力化学效应在不相容聚合物混合物增容,高分子树脂的自增塑,粘度不匹配聚合物体系的有效混合,高分子废弃物循环回收利用等方面的应用,聚合物粉碎过程产生的力化学效应的应用是设计和控制聚合物微观形态结构制备高性能复合和纳米复合材料的颇具前景的方法。 相似文献
16.
17.
从杂链聚合物、元素有机聚合物和无机高分子3方面介绍了水泥基聚合物防水材料的作用机理及应用情况,同时从机理、性能、合成和改性这4方面概括了国内外的研究进展,并对水泥基聚合物防水材料的发展进行了展望。 相似文献
18.
The electric permittivity is a material property that relates to the dielectric and electromagnetic behaviors. This work reports the effect of polymer admixtures on the permittivity (2 kHz) of cement paste. The permittivity is increased significantly by the addition of either methylcellulose (dissolved) or latex (styrene–butadiene, not dissolved), due to the capacitance of the interface between polymer and cement. The permittivity is effectively modeled by a material-level equivalent circuit model that comprises cement, polymer and cement/polymer interface in parallel. The series model is not effective. For both methylcellulose and latex, the cement and cement/polymer interface dominate the contributions to the permittivity, while the polymer contributes little. The contributions of polymer and cement/polymer interface increase monotonically with increasing polymer/cement ratio, while the contribution of cement decreases monotonically. Methylcellulose at the highest proportion of 1.4% by mass of cement gives permittivity 52, whereas latex at the highest solid latex proportion of 14% by mass of cement gives permittivity 43. For the same polymer/cement ratio, the permittivity is much higher for methylcellulose than latex. The difference between methylcellulose and latex is due to the much greater contribution of the cement/polymer interface to the permittivity for methylcellulose than latex, as caused by the nanoscale morphology of the methylcellulose and the consequent large cement/polymer interface area. At the same polymer/cement ratio, the fractional contribution from the cement/polymer interface is greater for methylcellulose than latex, though those from the polymer and cement are greater for latex than methylcellulose. 相似文献
19.
以N-异丙基丙烯酰胺(NIPAM)、甲基丙烯酸羟乙酯(HEMA)、丙烯酰胺(AM)、丙烯酸(AA)为原料,采用水溶液自由基聚合法制备了N-异丙基丙烯酰胺基温敏水溶性共聚物P(NIPAM-HEMA-AM)和P(NIPAM-HEMA-AM-NaAA)。研究了无机盐及聚合物结构对共聚物低临界溶解温度(LCST)的影响,考察了共聚物浓度、盐浓度、表面活性剂浓度对共聚物溶液流变性能特别是粘温特性的影响。结果显示,随着盐浓度的增加,共聚物溶液的LCST呈下降趋势。共聚物浓度较高时,在LCST附近表现出显著的升温增稠性。在P(NIPAM-HEMA-AM-NaAA)溶液中加入NaCl后溶液黏度增加,升温增稠效应明显。 相似文献
20.
高分子材料的绿色可持续发展 总被引:1,自引:0,他引:1
分析了高分子材料目前存在影响其产业可持续发展的有关问题,指出高分子材料在带给人类巨大效益的同时,也带来了严峻的环境问题。高分子材料要继续发展,必须走绿色可持续发展的道路。解决的方法有:高分子的绿色化合成,高分子加工的环境友好,发展绿色高分子及高分子的循环利用。 相似文献