Soil moisture variations monitoring by AMSU-based soil wetness indices: A long-term inter-comparison with ground measurements

Soil moisture controls the partitioning of rainfall into runoff and infiltration and, consequently, the runoff generation. On the catchment scale its routine monitoring can be performed through remote sensing technologies. Within this framework, the purpose of this study is to investigate the potential of the Advanced Microwave Sounding Unit (AMSU), radiometer on board the NOAA (National Oceanic and Atmospheric Administration) satellites and operating since 1998, for the assessment of soil wetness conditions by comparing soil moisture data with both those measured in situ and provided by a continuous rainfall-runoff model applied to four catchments located in the Upper Tiber River (Central Italy). In particular, in order to perform a robust analysis an extensive and long-term period (nine years) of data was investigated. In detail, the Soil Wetness Variation Index, derived from the AMSU data modified in order to take account of the difference between the soil layer investigated by the satellite sensor and that used as a benchmark, was found to be correlated both with the in-situ and modeled soil moisture variations showing correlation coefficients in the range of 0.42-0.49 and 0.33-0.48, respectively. As far as the soil moisture temporal pattern is concerned, higher correlations were obtained (0.59-0.84 for the in-situ data and 0.82-0.87 for the modeled data set) partly due to the soil moisture seasonal pattern that enhances the correlation. Overall, the root mean square error was found to be less than 0.05 m³/m³ for both the comparisons, thus assessing the potential of the AMSU sensor to quantitatively retrieve soil moisture temporal patterns. Moreover, the AMSU sensor can be considered as a useful tool to provide a reliable and frequently updated global soil moisture data set, considering its higher temporal resolution now available (about 4 passes per day) thanks to the presence of the sensor aboard different satellites.     

Surface soil moisture estimation over dense crop using Envisat ASAR and Landsat TM imagery: an approach

This study focuses on developing a new method of surface soil moisture estimation over wheat fields using Environmental Satellite Advanced Synthetic Aperture Radar (Envisat ASAR) and Landsat Thematic Mapper (TM) data. The Michigan Microwave Canopy Scattering (MIMICS) model was used to simulate wheat canopy backscattering coefficients from experiment plots at incidence angles of 23° (IS2) and 43.9° (IS7). Based on simulated data, the scattering characteristics of a wheat canopy were first investigated in order to derive an optimal configuration of polarization (HH) and incidence angle (IS2) for soil moisture estimation. Then a parametric model was developed to describe wheat canopy backscattering at the optimal configuration. In addition, direct backscattering and two-way transmissivity of wheat crowns were derived from the TM normalized difference vegetation index (NDVI); direct ground backscattering was derived from surface soil moisture and TM NDVI; and backscattering from double scattering was derived from total backscattering. A semi-empirical model for soil moisture estimation was derived from the parametric model. Coefficients in the semi-empirical model were obtained using a calibration approach based on measured soil moisture, ASAR, and TM data. A validation of the model was performed over the experimental area. In this study, the root mean square error (RMSE) for the estimated soil moisture was 0.041 m³ m^?3, and the correlation coefficient between the measured and estimated soil moisture was 0.84. The experimental results indicate that the semi-empirical model could improve soil moisture estimation compared to an empirical model.     

Analysis of in-situ soil moisture data and validation of SMOS soil moisture products at selected agricultural sites over a tropical region

Calibration and validation activities on Soil Moisture and Ocean Salinity (SMOS)-derived soil moisture products have been conducted worldwide since the data became available, but this has not been the case over tropical regions. This study focuses on the setting up of a soil moisture data collection network over an agricultural site in a tropical region in Peninsular Malaysia and on the validation of SMOS soil moisture products. The in-situ data over a one-and-a-half-year period was analysed and the validation of the SMOS soil moisture products with this in-situ data was conducted. Bias and root mean square error (RMSE) were computed between the SMOS soil moisture products and the in-situ surface soil moisture collected at the satellite passing times (6 am and 6 pm local time). Due to the known limitations of SMOS soil moisture retrieval over vegetated areas with a vegetation water content higher than 5 kg m^?2, an overestimation of SMOS soil moisture products to in-situ data was noticed in this study. The bias ranged from 0.064 to 0.119 m³ m^?3 and the RMSE was from 0.090 to 0.158 m³ m^?3, when both ascending and descending mode data were measured. This RMSE was found to be similar to those of a number of studies conducted previously at different regions. However, a wet bias was found during the validation, while previous validation activities at other locations showed dry biases. The result of this study is useful to support the continuous development and improvement of the SMOS soil moisture retrieval model, aiming to produce soil moisture products with higher accuracy, especially in tropical regions.     

Validation of a practical normalized soil moisture model with in situ measurements in humid and semi-arid regions

Soil moisture is an important parameter that influences the exchange of water and energy fluxes between the land surface and the atmosphere. Through the simulation by a Soil–Vegetation–Atmosphere Transfer model, Carlson proposed the universal spatial information-based method to determine soil moisture that is insensitive to the initial atmospheric and surface conditions, net radiation, and atmospheric correction. In this study, a practical normalized soil moisture model is established to describe the relationship among the normalized soil moisture (M), the normalized land surface temperature (T*), and the fractional vegetation cover. The dry and wet points are determined using the surface energy balance principle, which has a robust physical basis. This method is applied to retrieve soil moisture for the Soil Moisture-Atmosphere Coupling Experiment campaign in the Walnut Creek watershed, which has a humid climate, and at the Linzestation, which has a semi-arid climate. The validation data are obtained on days of year (DOYs) 182 and 189 in 2002 in the humid region and on DOYs 148 and 180 in 2008 for the semi-arid region; these data collection days are coincident with the overpass of the Landsat Thematic Mapper/Enhanced Thematic Mapper Plus. When the estimates are compared with the in situ measurements of soil water content, the root mean square error is approximately 0.10 m³ m^?3 with a bias of 0.05 m³ m^?3 for the humid region and 0.08 m³ m^?3 with a bias of 0.03 m³ m^?3 for the semi-arid region. These results demonstrate that the practical normalized soil moisture model is applicable in both humid and semi-arid regions.     

Use of vegetation index and meteorological parameters for the prediction of crop yield in India

Monsoon rainfall distribution over the Indian sub‐continent is inconsistent every year. Due to uncertainty and dependence on the monsoon onset and weather conditions, estimation of crop yield in India is difficult. In this paper, analyses of the crop yield, normalized difference vegetation index, soil moisture, surface temperature and rainfall data for 16 years (from 1984 to 1999) have been carried out. A non‐linear iterative multivariate optimization approach (quasi‐Newton method with least square loss function) has been used to derive an empirical piecewise linear crop yield prediction equation (with a break point). The derived empirical equation (based on 1984 to 1998 data) has been used to predict 1999 crop yield with R²>0.90. The model has been validated for the three years 1997, 1998 and 1999. A crop yield prediction equation has been obtained for each province in India (for wheat and rice) that accounts for>90% of the variance in the dataset.     

Soil moisture retrievals at L-band using a two-step inversion approach (COSMOS/NAFE'05 Experiment)

COSMOS (Campaign for validating the Operation of Soil Moisture and Ocean Salinity), and NAFE (National Airborne Field Experiment) were two airborne campaigns held in the Goulburn River catchment (Australia) at the end of 2005. These airborne measurements are being used as benchmark data sets for validating the SMOS (Soil Moisture and Ocean Salinity) ground segment processor over prairies and crops. This paper presents results of soil moisture inversions and brightness temperature simulations at different resolutions from dual-polarisation and multi-angular L-band (1.4 GHz) measurements obtained from two independent radiometers. The aim of the paper is to provide a method that could overcome the limitations of unknown surface roughness for soil moisture retrievals from L-band data. For that purpose, a two-step approach is proposed for areas with low to moderate vegetation. Firstly, a two-parameter inversion of surface roughness and optical depth is used to obtain a roughness correction dependent on land use only. This step is conducted over small areas with known soil moisture. Such roughness correction is then used in the second step, where soil moisture and optical depth are retrieved over larger areas including mixed pixels. This approach produces soil moisture retrievals with root mean square errors between 0.034 m³ m^− 3 and 0.054 m³ m^− 3 over crops, prairies, and mixtures of these two land uses at different resolutions.     

Temporal persistence and stability of surface soil moisture in a semi-arid watershed

Satellite soil moisture products, such as those from Advanced Microwave Scanning Radiometer (AMSR), require diverse landscapes for validation. Semi-arid landscapes present a particular challenge to satellite remote sensing validation using traditional techniques because of the high spatial variability and potentially rapid rates of temporal change in moisture conditions. In this study, temporal stability analysis and spatial sampling techniques are used to investigate the representativeness of ground observations at satellite scale soil moisture in a semi-arid watershed for a long study period (March 1, 2002 to September 13, 2005). The watershed utilized, the Walnut Gulch Experimental Watershed, has a dense network of 19 soil moisture sensors, distributed over a 150 km² study region. In conjunction with this monitoring network, intensive gravimetric soil moisture sampling conducted as part of the Soil Moisture Experiment in 2004 (SMEX04), contributed to the calibration of the network for large-scale estimation during the North American Monsoon System (NAMS). The sensor network is shown to be an excellent estimator of the watershed average with an accuracy of approximately 0.01 m³/m³ soil moisture. However, temporal stability analysis indicated that while much of the network is stable, the soil moisture spatial pattern, as represented by mean relative difference, is not replicated by the network mean relative difference pattern. Rather, the network is composed of statistical samples. Geophysical aspects of the watershed, including topography and soil type are also examined for their influence on the soil moisture variability and stability. Soil type, as characterized by bulk density, clay and sand content, was responsible for nearly 50% of the temporal stability. Topographic effects were less important in defining representativeness and stability.     

Development of an ATI-NDVI method for estimation of soil moisture from MODIS data

Estimation of soil moisture is essential for research of climatology, hydrology, and ecology. The commonly used remotely sensed approach is LST-NDVI (land-surface temperature-normalized difference vegetation index). In this study, the apparent thermal inertia (ATI) is used instead of surface temperature to develop an ATI-NDVI space for estimation of soil moisture. Comparison with ground-based measurements shows a root mean square error (RMSE) of 0.0378 m³ m^?3 between retrieved and measured soil moistures. Validation with time series in situ data indicates the RMSE as 0.0162, 0.0285, 0.0368, and 0.0093 m³ m^?3 for forest, shrub, cropland, and grassland, respectively, which is comparable to or even better than the results of previous studies. The proposed method in this study is a remote-sensing approach without elaborate ancillary data except for the percentage of sand in the soil, and it is practical and convenient to be applied to regions with surfaces from bare soil to full vegetation and the entire range of surface moisture contents from wet to dry.     

Soil moisture retrieval using thermal inertia, determined with visible and thermal spaceborne data, validated for European forests

Variations in soil moisture strongly affect surface energy balances, regional runoff, land erosion and vegetation productivity (potential crop yield). Hence, the detection of soil moisture content (SMC) is very valuable in the social, economic, humanitarian (food security) and environmental segments of society. A method to estimate SMC from optical and thermal spectral information of METEOSAT imagery based on thermal inertia (TI) is presented. Minimum and maximum TI values from time series are combined in the Soil Moisture Saturation Index (SMSI). To convert surface to soil profile values, a Markov type filter is used, based on a simple two layer water balance equation (the surface layer and the reservoir below) and an autocorrelation function. Ten-daily SMC values are compared with up-scaled (using AVHRR/NDVI) observations on 10 EUROFLUX sites in Europe for the 1997 growing season (March-October). Moreover, the thermal inertia approach is compared for 1997, with ERS Scatterometer data for eight EUROFLUX sites. METEOSAT pixels are up-scaled to accommodate the ERS Scatterometer spatial resolution. The regression coefficients (slope, intercept and R²) of the thermal inertia approach versus the up-scaled soil moisture observations from EUROFLUX sites vary between 0.811-1.148, − 0.0029-0.66 and 0.544-0.877, respectively, with a RRMSE range of 3.9% to 35.7%. The regression coefficients of the comparison of ERS Scatterometer derived Soil Water Index (SWI) versus the up-scaled Soil Moisture Saturation Index for the pooled case (binning the eight EUROFLUX sites) are 0.587, 0.105 and 0.441, respectively, with a RRMSE of 38%. A simple error propagation model applied for the thermal inertia approach reveals that the absolute and relative errors of the obtained soil moisture content is at least 0.010 m³ m^− 3 or 2.0% with a SMC of 0.203 m³ m^− 3. Recommendations are made to test and implement the TI methodology using NOAA/AVHRR imagery.     

A method for retrieving soil moisture in Tibet region by utilizing microwave index from TRMM/TMI data

According to simulation analysis of the advanced integral equation model (AIEM), there is a good linear relationship between emissivity and soil moisture under conditions of given roughness. The normalized difference of emissivities at 19.35 GHz and 10.65 GHz with vertical polarization can partly eliminate the influence of roughness and the squared correlation coefficient is about 0.985. This paper uses the normalized brightness temperature for retrieving soil moisture in Tibet from TRMM/TMI data. This method avoids parametrizing the land surface temperature which is a key parameter for the computation of emissivity. We make some sensitivity analysis for the atmosphere which is the main influence factor for our method. The analysis results indicate that our method is very good for clear days but is not very good when there is rainfall. We evaluate our algorithm by using the ground truth data obtained from GAME‐Tibet and the retrieval error of soil moisture is about 0.04m³ m^?3 relative to experimental data. The analysis indicates that the relationship obtained from the theoretical model should be revised through the local ground measurement data because the method is still influenced by roughness and vegetation. After making a regression revision, the retrieval error of soil moisture is under 0.02m³ m^?3. Finally, we retrieve the soil moisture in Tibet from TRMM/TMI data, and the distribution trend of retrieval results is consistent with the real world.     

Evaluation of the Oceansat‐1 Multi‐frequency Scanning Microwave Radiometer and its potential for soil moisture retrieval

The Multi‐frequency Scanning Microwave Radiometer (MSMR) aboard the Indian Space Research Organization—Oceansat‐1 platform measured land surface brightness temperature at a C‐band frequency and provided an opportunity for exploring large‐scale soil moisture retrieval during its two‐year period of operation. These data may provide a valuable extension to the Scanning Multichannel Microwave Radiometer (SMMR) and the Advanced Microwave Scanning Radiometer (AMSR) since they covered a portion of the time period between the two missions. This investigation was one of the first to utilize the MSMR data for a land application and, as a result, several data quality issues had to be addressed. These included geolocation accuracy, calibration (particularly over land), erroneous data, and the significance of anthropogenic radio‐frequency interference (RFI). Calibration of the low frequency channels was evaluated using inter‐comparisons between the Tropical Rainfall Measuring Mission/Microwave Imager (TRMM/TMI) and the MSMR brightness temperatures. Biases (TMI T _B>MSMR T _B) of 3.4 and 3.6 K were observed over land for the MSMR 10.65 GHz horizontal and vertical polarization channels, respectively. These results suggested that additional calibration of the MSMR data was required. Comparisons between the MSMR measured brightness temperature and ground measured volumetric soil moisture collected during the South Great Plain experiment (SGP99) indicated that the lower frequency and horizontal polarization observations had higher sensitivity to soil moisture. Using a previously developed soil emission model, multi‐temporal regional soil moisture distributions were retrieved for the continental United States. Comparisons between the MSMR based soil moisture and ground measured volumetric soil moisture indicated a standard error of estimate of 0.052 m³/m³.     

Evaluation of MODIS derived perpendicular drought index for estimation of surface dryness over northwestern China

In this paper, drought status of northwestern China is evaluated using the Terra–Moderate Resolution Imaging Spectroradiometer (MODIS) data with a newly developed method called perpendicular drought index (PDI), which is defined as a line segment that is parallel with the soil line and perpendicular to the normal line of soil line intersecting the coordinate origin in the two‐dimensional scatter plot of red against near infrared (NIR) wavelength reflectance. To validate the PDI in macroscale applications, quantitative evaluation of drought conditions in Ningxia, Northwestern China is carried out by comparing the PDI with one of the well‐known drought indexes, namely, temperature‐vegetation index (TVX). Linear regression between ground‐measured soil moisture data and the PDI and the TVX was made. Results show that satellite based PDI and TVX has significant correlation with 0–20 cm averaged soil moisture obtained over the meteorological observing stations across the whole study area. The highest correlation of R ² = 0.48 for the PDI and R ² = 0.40 for the TVX is obtained when compared with average soil moisture from 0 to 20 cm soil depth. According to the drought critical values defined by soil hydrologic parameters including soil moisture, wilting coefficient and field moisture capacity, the PDI based drought guidelines are established, and then the drought status in the study area is evaluated using the PDI. It is evident from the results showing the spatial distribution of drought in northwestern China that the PDI is highly accordant with field drought status.     

Bare surface soil moisture retrieval from the synergistic use of optical and thermal infrared data

Land surface soil moisture (SSM) is crucial to research and applications in hydrology, ecology, and meteorology. To develop a SSM retrieval model for bare soil, an elliptical relationship between diurnal cycles of land surface temperature (LST) and net surface shortwave radiation (NSSR) is described and further verified using data that were simulated with the Common Land Model (CoLM) simulation. In addition, with a stepwise linear regression, a multi-linear model is developed to retrieve daily average SSM in terms of the ellipse parameters x₀ (horizontal coordinate of the ellipse centre), y₀ (vertical coordinate of the ellipse centre), a (semi-major axis), and θ (rotation angle), which were acquired from the elliptical relationship. The retrieval model for daily average SSM proved to be independent of soil type for a given atmospheric condition. Compared with the simulated daily average SSM, the proposed model was found to be of higher accuracy. For eight cloud-free days, the root mean square error (RMSE) ranged from 0.003 to 0.031 m³ m^?3, while the coefficient of determination (R²) ranged from 0.852 to 0.999. Finally, comparison and validation were conducted using simulated and measured data, respectively. The results indicated that the proposed model showed better accuracy than a recently reported model using simulated data. A simple calibration decreased RMSE from 0.088 m³ m^?3 to 0.051 m³ m^?3 at Bondville Companion site, and from 0.126 m³ m^?3 to 0.071 m³ m^?3 at the Bondville site. Coefficients of determination R² = 0.548 and 0.445 were achieved between the estimated daily average SSM and the measured values at the two sites, respectively. This paper suggests a promising avenue for retrieving regional SSM using LST and NSSR derived from geostationary satellites in future developments.     

An appraisal of the accuracy of operational soil moisture estimates from SMOS MIRAS using validated in situ observations acquired in a Mediterranean environment

Acquiring information on the spatio-temporal variability of soil moisture is of key importance in extending our capability to understand the Earth system’s physical processes, and is also required in many practical applications. Earth observation (EO) provides a promising avenue to observe the distribution of soil moisture at different observational scales, with a number of products distributed at present operationally. Validation of such products at a range of climate and environmental conditions across continents is a fundamental step related to their practical use. Various in situ soil moisture ground observational networks have been established globally providing suitable data for evaluating the accuracy of EO-based soil moisture products. This study aimed at evaluating the accuracy of soil moisture estimates provided from the Soil Moisture and Ocean Salinity Mission (SMOS) global operational product at test sites from the REMEDHUS International Soil Moisture Network (ISMN) in Spain. For this purpose, validated observations from in situ ground observations acquired nearly concurrent to SMOS overpass were utilized. Overall, results showed a generally reasonable agreement between the SMOS product and the in situ soil moisture measurements in the 0–5 cm soil moisture layer (root mean square error (RMSE) = 0.116 m³ m^?3). An improvement in product accuracy for the overall comparison was shown when days of high radio frequency interference were filtered out (RMSE = 0.110 m³ m^?3). Seasonal analysis showed highest agreement during autumn, followed by summer, winter, and spring seasons. A systematic soil moisture underestimation was also found for the overall comparison and during the four seasons. Overall, the result provides supportive evidence of the potential value of this operational product for meso-scale studies and practical applications.     

Soil moisture estimation using land surface temperature and soil temperature at 5 cm depth

Soil Temperature (ST) data, obtained from either field works or satellite imagery, has frequently been studied for Soil Moisture (SM) estimation. However, a combination of ST data at different depths and soil surface temperature, i.e., Surface Radiometric Temperature (SRT) or Land Surface Temperature (LST), has not yet been well investigated for accurate SM prediction. In this study, an empirical model was first developed to estimate SM at 5 cm Depth (SM_5D) over areas with no or sparse vegetation cover using the field SRT and field ST data at 5 cm Depth (ST_5D). A Root Mean Square Error (RMSE) and a correlation coefficient (r) of 0.037 m³ m^?3 and 0.8 were obtained using this model, respectively. Then, the SRT was substituted by the LST obtained from Landsat thermal bands and ST_5D was estimated using the ST data collected at the nearest weather station to the study area by developing a regression equation. The second model demonstrated an RMSE and r of 0.035 m³ m^?3 and 0.71, respectively. Overall, it was concluded that the proposed models had high potential for SM estimation using the ST data at different depths collected in the field or acquired by optical satellites.     

Evaluation of soil moisture from satellite observations over South America

A study was performed to evaluate the surface soil moisture derived from Advanced Microwave Scanning Radiometer for the Earth Observing System (AMSR-E) sensor observations over South America. Other soil moisture and rainfall datasets were also used for the analysis. The information for the soil data came from the Eta regional climate model, and for the rainfall data from the Tropical Rainfall Microwave Mission (TRMM) satellite. Statistical analysis was used to evaluate the quality of the soil moisture and rainfall products, with estimates of the correlation coefficient (R), χ² and Cramer's phi (?_c). The results show high correlations (R > 0.8) of the AMSR-E soil moisture products with the Eta model for different regions of South America. Comparison of soil moisture products with rainfall datasets showed that the AMSR-E C-band soil moisture product was highly correlated with the TRMM satellite rainfall datasets, with the highest values of χ² and ?. The results show that the AMSR-E C-band soil moisture products contain important information that can be used for various purposes, such as monitoring floods or droughts in arid areas or as input within the framework of an assimilation scheme of numerical weather prediction models.     

The SMOS Mediterranean Ecosystem L-Band characterisation EXperiment (MELBEX-I) over natural shrubs

In the framework of ESA's SMOS mission (Soil Moisture and Ocean Salinity), many studies have been carried out over different land surface types to model their microwave emission at L-band (1.4 GHz). Results of these studies have been integrated in the emission model L-MEB (L-Band Microwave Emission of the Biosphere), which is the core of the SMOS Level 2 soil moisture retrieval algorithm. The Mediterranean Ecosystem L-Band characterisation EXperiment (MELBEX-I) was carried out at the SMOS validation site near Valencia in autumn 2005. The main objective of MELBEX-I was to calibrate L-MEB over Mediterranean shrub land, as no data were available over this biome. For that purpose, multi-angular and dual polarimetric measurements (H, V) were obtained by the EMIRAD L-band radiometer from a 14-m tower. Results of this study indicate a small and constant impact of vegetation on the microwave emission of shrub land, and L-MEB parameters for shrub land were obtained. In addition, the study highlights the need for calibrating microwave soil roughness, which was found to be constant at the site. Depending on the number of retrieved parameters, soil moisture (SM) near the surface could be estimated with errors between 0.035 m³ m^− 3 (if only SM was retrieved) and 0.057 m³ m^− 3 (if SM, optical depth and a roughness parameter were simultaneously retrieved). Finally, no modelling improvements were observed when coarse estimates of the fraction of exposed rocks were accounted for in the model.     

Soil moisture estimation in a semiarid rangeland using ERS-2 and TM imagery

Soil moisture is important information in semiarid rangelands where vegetation growth is heavily dependent on the water availability. Although many studies have been conducted to estimate moisture in bare soil fields with Synthetic Aperture Radar (SAR) imagery, little success has been achieved in vegetated areas. The purpose of this study is to extract soil moisture in sparsely to moderately vegetated rangeland surfaces with ERS-2/TM synergy. We developed an approach to first reduce the surface roughness effect by using the temporal differential backscatter coefficient (Δσ_wet-dry⁰). Then an optical/microwave synergistic model was built to simulate the relationship among soil moisture, Normalized Difference Vegetation Index (NDVI) and Δσ_wet-dry⁰. With NDVI calculated from TM imagery in wet seasons and Δσ_wet-dry⁰ from ERS-2 imagery in wet and dry seasons, we derived the soil moisture maps over desert grass and shrub areas in wet seasons. The results showed that in the semiarid rangeland, radar backscatter was positively correlated to NDVI when soil was dry (m_v<10%), and negatively correlated to NDVI when soil moisture was higher (m_v>10%). The approach developed in this study is valid for sparse to moderate vegetated areas. When the vegetation density is higher (NDVI>0.45), the SAR backscatter is mainly from vegetation layer and therefore the soil moisture estimation is not possible in this study.     

ASCAT soil wetness index validation through in situ and modeled soil moisture data in central Italy

Reliable measurements of soil moisture at global scale might greatly improve many practical issues in hydrology, meteorology, climatology or agriculture such as water management, quantitative precipitation forecasting, irrigation scheduling, etc. Remote sensing offers the unique capability to monitor soil moisture over large areas but, nowadays, the spatio-temporal resolution and accuracy required for some hydrological applications (e.g., flood forecasting in medium to large basins) have still to be met. The Advanced SCATterometer (ASCAT) onboard the Metop satellite (VV polarization, C-band at 5.255 GHz), based on a large extent on the heritage of the ERS scatterometer, provides a soil moisture product available at a coarse spatial resolution (25 km and 50 km) and at a nearly daily time step. This study evaluates the accuracy of the new 25 km ASCAT derived saturation degree product by using in situ observations and the outcomes of a soil water balance model for three sites located in an inland region of central Italy. The comparison is carried out for a 2-year period (2007-2008) and three products derived from ASCAT: the surface saturation degree, m_s, the exponentially filtered soil wetness index, SWI, and its linear transformation, SWI*, matching the range of variability of ground data. Overall, the performance of the three products is found to be quite good with correlation coefficients higher than 0.92 and 0.80 when the SWI is compared with in situ and simulated saturation degree, respectively. Considering SWI*, the root mean square error is less than 0.035 m³/m³ and 0.042 m³/m³ for in situ and simulated saturation degree, respectively. More notably, when the m_s product is compared with modeled data at 3 cm depth, this index is found able to accurately reproduce the temporal pattern of the simulated saturation degree in terms of both timing and entity of its variations also at fine temporal scale. The daily temporal resolution and the reliability obtained with the ASCAT derived saturation degree products represent the preliminary step for its effective use in operational rainfall-runoff modeling.     

基于CCI土壤水分产品的干旱指数精度评价及其对东北地区粮食产量的影响

土壤水分是监测作物旱情的基本因子,以欧空局1978~2014年微波遥感土壤水分产品、中国经济与社会发展统计数据库以及气象数据为基础,结合土壤水分亏缺指数（Soil Water Deficit Index, SWDI）分析东北地区的干旱程度与玉米亩产的关系。结果表明：①东北三省干旱程度空间上呈现自东北向西南逐渐加重的空间分布模式;②基于CCI (Climate Change Initiative)土壤水分产品计算的SWDI干旱指数与降雨量和气温有良好的相关关系,可用于评估干旱发生的严重程度;③玉米生长季关键需水期——7月的SWDI与玉米产量的相关性最好,二者在黑龙江、吉林和辽宁省的R2分别为0.43、0.78和0.38,非常适合用于评估干旱对玉米单产的影响。该结论对于研究大范围土壤水分含量对农作物产量的影响以及相关农业决策具有重要指导意义。