A virtual reality keyboard with realistic haptic feedback in a fully immersive virtual environment

This study presents a 3D virtual reality (VR) keyboard system with realistic haptic feedback. The system uses two five-fingered data gloves to track finger positions and postures, uses micro-speakers to create simulated vibrations, and uses a head-mounted display (HMD) for 3D display. When users press a virtual key in the VR environment, the system can provide realistic simulated key click haptic feedback to users. The results of this study show that the advantages of the haptic VR keyboard are that users can use it when wearing HMDs (users do not need to remove HMDs to use the VR keyboard), the haptic VR keyboard can pop-up display at any location in the VR environments (users do not need to go to a specific location to use an actual physical keyboard), and the haptic VR keyboard can be used to provide realistic key click haptic feedback (which other studies have shown enhances user performance). The results also show that the haptic VR keyboard system can be used to create complex vibrations that simulate measured vibrations from a real keyboard and enhance keyboard interaction in a fully immersive VR environment.     

The affect of contact force sensations on user performance in virtual assembly tasks

The development of a realistic virtual assembly environment is challenging because of the complexity of the physical processes and the limitation of available VR technology. Many research activities in this domain primarily focused on particular aspects of the assembly task such as the feasibility of assembly operations in terms of interference between the manipulated parts. The virtual assembly environment reported in this research is focused on mechanical part assembly. The approach presented addresses the problem of part-to-part contacts during the mating phase of assembly tasks. The system described calculates contact force sensations by making their intensity dependent on the depth of penetration. However the penetration is not visible to the user who sees a separate model, which does not intersect the mating part model. The two 3D models of the part, the off-screen rendered model and the on-screen rendered model are connected by a spring-dumper arrangement. The force calculated is felt by the operator through the haptic interface when parts come in contact during the mating phase of the assembly task. An evaluation study investigating the effect of contact force sensation on user performance during part-to-part interface was conducted. The results showed statistically significant effect of contact force sensation on user performance in terms of task completion time. The subjective evaluation based on feedback from users confirmed that contact force sensation is a useful cue for the operator to find the relative positions of components in the final assembly state.     

Haptic Direct-Drive Robot Control Scheme in Virtual Reality

This paper explores the use of a 2-D (Direct-Drive Arm) manipulator for mechanism design applications based on virtual reality (VR). This article reviews the system include a user interface, a simulator, and a robot control scheme. The user interface is a combination of a virtual clay environment and human arm dynamics via robot effector handler. The model of the VR system is built based on a haptic interface device behavior that enables the operator to feel the actual force feedback from the virtual environment just as s/he would from the real environment. A primary stabilizing controller is used to develop a haptic interface device where realistic simulations of the dynamic interaction forces between a human operator and the simulated virtual object/mechanism are required. The stability and performance of the system are studied and analyzed based on the Nyquist stability criterion. Experiments on cutting virtual clay are used to validate the theoretical developments. It was shown that the experimental and theoretical results are in good agreement and that the designed controller is robust to constrained/unconstrained environment.     

The use of force feedback and auditory cues for performance of an assembly task in an immersive virtual environment

Using an immersive virtual environment, this study investigated whether the inclusion of force feedback or auditory cues improved manipulation performance and subjective reports of usability for an assembly task. Twenty-four volunteers (12 males and 12 females) were required to assemble and then disassemble five interconnecting virtual parts with either auditory, force, or no feedback cues provided. Performance for the assembly task was measured using completion time and number of collisions between parts, while the users preferences across conditions were evaluated using subjective reports of usability. The results indicated that the addition of force feedback slowed completion time and led to more collisions between parts for males. In contrast, females exhibited no change in the mean completion time for the assembly task but did show an increase in collision counts. Despite these negative performance findings when adding force feedback, users did report perceived increases in realism, helpfulness and utility towards the assembly task when force feedback was provided. Unlike force feedback, the results showed that auditory feedback, indicating that parts had collided during the assembly task, had no negative performance effects on the objective measures while still increasing perceived realism and overall user satisfaction. When auditory cues and force feedback were presented together, performance times, number of collisions, and usability were not improved compared to conditions containing just auditory cues or force feedback alone. Based on these results, and given the task and display devices used in the present study, the less costly option of excluding auditory and force feedback cues would produce the best performance when measured by the number of collisions and completion time. However, if increased ratings of usability for an assembly task are desired while maintaining objective performance levels and reduced cost, then the inclusion of auditory feedback cues is best.     

视触觉融合的增强现实三维注册方法

增强现实技术是近年来人机交互领域的研究热点。在增强现实环境下加入触觉感知,可使用户在真实场景中看到并感知到虚拟对象。为了实现增强现实环境下与虚拟对象之间更加自然的交互,提出一种视触觉融合的三维注册方法。基于图像视觉技术获得三维注册矩阵;借助空间转换关系求解出触觉空间与图像空间的转换关系;结合两者与摄像头空间的关系实现视触觉融合的增强现实交互场景。为验证该方法的有效性,设计了一个基于视触觉增强现实的组装机器人项目。用户可触摸并移动真实环境中的机器人零件,还能在触摸时感受到反馈力,使交互更具真实感。     

Development of a physically behaved robot work cell in virtual reality for task teaching

Robot task teaching on a real work cell is expensive and sometimes risky. This cost and risk can be avoided by using virtual reality technology. Using the simulated environment in virtual reality (VR), the operator can practise, explore and preview the operations for possible problems that might occur during implementation. It is therefore of practical importance to build the virtual robot work cell in VR that can facilitate the study of the performance of robotic tasks such as robotic assembly. This paper describes our work in incorporating physical behaviours of virtual objects into VR for robot task teaching. To facilitate the task teaching, we developed visual and audio cues which help visualise the dynamic interactions between virtual objects. Dynamic sensing capability is incorporated in the simulated environment. A simplified force sensor is modelled and simulated. The physical behaviours of the virtual objects are simulated using physics-based approach. A virtual robot work cell is built incorporating the developed features and an example for the task teaching is given. The implementation includes view tracking using virtual camera, visual and audio rendering, and the user interface developed in the VR. The current implementation was carried out on a PC-based VR platform, with the programs developed using Watcom C++.     

Design of an intelligent robotic precise assembly system for rapid teaching and admittance control

In this study, an intelligent robotic precise assembly system for rapid teaching and admittance control was developed. The system comprised three parts, namely the teaching, trajectory learning, and controlling systems. The teaching system controlled the robotic arm through a haptic device and generated tactile feedback for the operator. The trajectory learning system optimized the reference trajectory by mixture Gaussian regression and verified the safety of the reference trajectory through a force field simulation. The controlling system employed admittance control in response to the potential environmental disturbance. A robotic Ethernet-connector assembly system was validated. The results revealed that the arm learned the reference trajectory from ten sets of teaching data. Additionally, the contact force on the aluminium shell in the plugin process was significantly lower than that of the teaching data. Even when the shell was displaced by 1 mm and vibrated at 2 Hz, the robotic arm was able to insert the plastic component in the shell.     

Simultaneous remote haptic collaboration for assembling tasks

Stand-alone virtual environments (VEs) using haptic devices have proved useful for assembly/disassembly simulation of mechanical components. Nowadays, collaborative haptic virtual environments (CHVEs) are also emerging. A new peer-to-peer collaborative haptic assembly simulator (CHAS) has been developed whereby two users can simultaneously carry out assembly tasks using haptic devices. Two major challenges have been addressed: virtual scene synchronization (consistency) and the provision of a reliable and effective haptic feedback. A consistency-maintenance scheme has been designed to solve the challenge of achieving consistency. Results show that consistency is guaranteed. Furthermore, a force-smoothing algorithm has been developed which is shown to improve the quality of force feedback under adverse network conditions. A range of laboratory experiments and several real trials between Labein (Spain) and Queen’s University Belfast (Northern Ireland) have verified that CHAS can provide an adequate haptic interaction when both users perform remote assemblies (assembly of one user’s object with an object grasped by the other user). Moreover, when collisions between grasped objects occur (dependent collisions), the haptic feedback usually provides satisfactory haptic perception. Based on a qualitative study, it is shown that the haptic feedback obtained during remote assemblies with dependent collisions can continue to improve the sense of co-presence between users with regard to only visual feedback.     

Usability of optically simulated haptic feedback

In this contribution a method will be described to optically simulate haptic feedback without resorting to mechanical force feedback devices. This method exploits the domination of the visual over the haptic modality. The perception of haptic feedback, usually generated by force feedback devices, was simulated by tiny displacements on the cursor position relative to the intended force. The usability of optically simulated haptic feedback (OSHF) was tested experimentally by measuring effectiveness, efficiency and satisfaction of its users in a Fitts’ type target-acquisition task and comparing the results with the usability of mechanically simulated force feedback and normal feedback. Results show that OSHF outperforms mechanically simulated haptic feedback and normal feedback, especially in the case of small targets.     

A large haptic device for aircraft engine maintainability

The virtual reality for maintainability (Revima) VR system supports maintainability simulation in aeronautics. Within this project we have developed and integrated a haptic device, the large haptic interface for aeronautic maintainability (LHIfAM). We use this device to track hand movements and provide force feedback within the large geometric models that describe aircraft engines. The user movements are the same as those that occur when testing physical mock-ups. An integrated haptic device and VR system for testing aircraft engines reduces development costs and avoids the necessity of physical mock-ups formaintainability.     

虚拟现实大空间下多虚拟目标被动触觉交互方法

针对虚拟现实（VR）大空间下为重定向行走的用户提供被动触觉时存在的虚实交互目标无法一一对应的问题,提出了一种用两个物理代理作为触觉代理为多个虚拟目标提供触觉反馈的方法,以在基于人工势场（APF）的重定向行走过程中,交替地满足用户被动触觉的需求。针对重定向行走算法本身以及标定不精确等原因造成的虚实不对齐的问题,对虚拟目标的位置及朝向进行设计并且在交互阶段引入触觉重定向。仿真实验表明对虚拟目标位置和朝向的设计可以大幅降低对齐误差;而用户实验结果证明触觉重定向的引入进一步提升了交互准确性,且能为用户带来更丰富、更具沉浸感的体验。     

Improving virtual reality navigation tasks using a haptic vest and upper body tracking

Haptic feedback is an important component of immersive virtual reality (VR) applications that is often suggested to complement visual information through the sense of touch. This paper investigates the use of a haptic vest in navigation tasks. The haptic vest produces a repulsive vibrotactile feedback from nearby static virtual obstacles that augments the user spatial awareness. The tasks require the user to perform complex movements in a 3D cluttered virtual environment, like avoiding obstacles while walking backwards and pulling a virtual object. The experimental setup consists of a room-scale environment. Our approach is the first study where a haptic vest is tracked in real time using a motion capture device so that proximity-based haptic feedback can be conveyed according to the actual movement of the upper body of the user.User study experiments have been conducted with and without haptic feedback in virtual environments involving both normal and limited visibility conditions. A quantitative evaluation was carried out by measuring task completion time and error (collision) rate. Multiple haptic rendering techniques have also been tested. Results show that under limited visibility conditions proximity-based haptic feedback generated by a wearable haptic vest can significantly reduce the number of collisions with obstacles in the virtual environment.     

Factors affecting user performance in haptic assembly

Current computer-aided assembly systems provide engineers with a variety of spatial snapping and alignment techniques for interactively defining the positions and attachments of components. With the advent of haptics and its integration into virtual assembly systems, users now have the potential advantage of tactile information. This paper reports research that aims to quantify how the provision of haptic feedback in an assembly system can affect user performance. To investigate human–computer interaction processes in assembly modeling, performance of a peg-in-hole manipulation was studied to determine the extent to which haptics and stereovision may impact on task completion time. The results support two important conclusions: first, it is apparent that small (i.e. visually insignificant) assembly features (e.g. chamfers) affect the overall task completion at times only when haptic feedback is provided; and second, that the difference is approximately similar to the values reported for equivalent real world peg-in-hole assembly tasks.     

The moderating role of sensation seeking tendency in robotic haptic interfaces

This study examined the interaction effects between haptic force feedback and users’ sensation seeking tendency (i.e. need for sensations) on users’ feelings of presence (i.e. the state in which users experience virtual objects and virtual environments as if they were actual) in robotic haptic interfaces. Users with low sensation seeking tendency felt stronger physical presence and spatial presence in response to force feedback haptic stimuli (versus no force feedback), whereas users with high sensation seeking tendency did not show any difference between the two conditions, thus confirming the moderating role of the users’ sensation seeking tendency in the robotic haptic interface. Theoretical implications for human–computer interaction (HCI) research and managerial implications for the interactive media market are discussed.     

Networked multiplayer cooperative interaction using decoupled motion control method in a shared virtual environment with haptic,visual and movement feedback

This paper focuses on multiplayer cooperative interaction in a shared haptic environment based on a local area network. Decoupled motion control, which allows one user to manipulate a haptic interface to control only one‐dimensional movement of an avatar, is presented as a new type haptic‐based cooperation among multiple users. Users respectively move an avatar along one coordinate axis so that the motion of the avatar is the synthesis of movements along all axes. It is different from previous haptic cooperation where all users can apply forces on an avatar along any direction to move it, the motion of which completely depends on the resultant force. A novel concept of movement feedback is put forward where one user can sense other users’ hand motions through his or her own haptic interface. The concept can also be explained wherein one person who is required to move a virtual object along only one axis can also feel the motions of the virtual object along other axes. Movement feedback, which is a feeling of motion, differs from force feedback, such as gravity, collision force and resistance. A spring‐damper force model is proposed for the computation of motion feedback to implement movement transmission among users through haptic devices. Experimental results validate that movement feedback is beneficial for performance enhancement of such kind of haptic‐based cooperation, and the effect of movement feedback in performance improvement is also evaluated by all subjects.Copyright © 2012 John Wiley & Sons, Ltd.     

Virtual prototyping of a car turn-signal switch using haptic feedback

The present work describes the virtual prototyping procedure of car turn-signal switches using a dedicated haptic feedback system. Although turn-signal switches have mechanisms with simple geometry, simulating the “feeling” during its operation is still a challenge. In order to allow ergonomics designers to directly assess the comfort of operation, a dedicated haptic system was developed for reproducing the force feedback that would characterize a real turn-signal switch. For the accurate haptic feedback generation and rendering purpose, a detailed computer-aided design model of the switch was developed together with a multibody simulation. For the design purpose a novel method for the synthesis of the cam mechanism was also developed, starting from an imposed force profile that was previously validated on the haptic device, for which the cam geometry is determined. Thus, the proposed approach enables the designer to also design the “feel” of the switch, and directly manufacture a good model, simplifying the usual iterative process necessary to implement the desired force profile. Finally, an example of virtual prototyping of a turn-signal switch is presented demonstrating the usability of the proposed method and the haptic system.     

The effect of sub-threshold forces on human performance in multi-modal computer-aided design

In traditional CAD (computer-aided design) systems, the manipulation of points and lines is often difficult because designers manipulate virtual objects through their vision system. Nowadays, designers can explore and manipulate virtual objects in haptic-enabled CAD systems using haptic devices. Haptic devices can present force feedbacks to pull or push the users’ hands into desirable targets. Of course the intent is for the user to experience the same sensations in the virtual realm as they would in the real world. Thus, sub-threshold forces, which cannot be perceived by users, should be incorporated in the control of users’ movements. As a result, our attention is directed to study the effect of sub-threshold forces on the accuracy of movement in a haptic-enabled virtual reality (VR) system. In this study, our goal is to manipulate users’ hands using controlled forces such that users cannot notice the forces. With this in mind, we have constructed a haptic-enabled virtual environment (VE) to carry out a multi-modal Fitts’ type task. In the task, subjects could see the position of the haptic probe in the VE where forces were applied on their hands. Basically, the accuracy of subjects was measured using a performance index when the intensity and direction of forces changed. A psychophysical method was utilized to ensure that the forces were below the force threshold of the human force perception. Results indicate that the accuracy is affected by the intensity and direction of sub-threshold forces even when users are allowed to control their actions through visual feedbacks.     

A Survey of Haptic Rendering Techniques

Computer Graphics technologies have developed considerably over the past decades. Realistic virtual environments can be produced incorporating complex geometry for graphical objects and utilising hardware acceleration for per pixel effects. To enhance these environments, in terms of the immersive experience perceived by users, the human's sense of touch, or haptic system, can be exploited. To this end haptic feedback devices capable of exerting forces on the user are incorporated. The process of determining a reaction force for a given position of the haptic device is known as haptic rendering. For over a decade users have been able to interact with a virtual environment with a haptic device. This paper focuses on the haptic rendering algorithms which have been developed to compute forces as users manipulate the haptic device in the virtual environment.     

Interaction model between elastic objects for haptic feedback considering collisions of soft tissue

The simulation of organ–organ interaction is indispensable for practical and advanced medical VR simulator such as open surgery and indirect palpation. This paper describes a method to represent real-time interaction between elastic objects for accurate force feedback in medical VR simulation. The proposed model defines boundary deformation of colliding elements based on temporary surface forces calculated by temporary deformation. The model produces accurate deformation and force feedback considering collisions of objects as well as prevents unrealistic overlap of objects. A prototype simulator of rectal palpation is constructed on general desktop PC with a haptic device, PHANToM. The system allows users to feel different stiffness of a rear elastic object located behind another elastic object. The results of experiments confirmed the method expresses organ–organ interaction in real-time and produces realistic and perceivable force feedback.