Fine-scale bacterial community dynamics and the taxa-time relationship within a full-scale activated sludge bioreactor

In activated sludge bioreactors, aerobic heterotrophic communities efficiently remove organics, nutrients, toxic substances, and pathogens from wastewater, but the dynamics of these communities are as yet poorly understood. A macroecology metric used to quantify community shifts is the taxa-time relationship, a temporal analog of the species-area curve. To determine whether this metric can be applied to full-scale bioreactors, activated sludge samples were collected weekly over a one-year period at a local municipal wastewater treatment plant. Bacterial community dynamics were evaluated by monitoring 16S rRNA genes using Terminal Restriction Fragment Length Polymorphism (T-RFLP), corroborated by clone libraries. Observed taxa richness increased with time according to a power law model, as predicted by macroecological theory, with a power law exponent of w = 0.209. The results reveal strong long-term temporal dynamics during a period of stable performance (BOD removal and nitrification). Community dynamics followed a gradual succession away from initial conditions rather than periodicity around a mean “equilibrium”, with greater within-month then among-month community similarities. Changes in community structure were significantly associated via multivariate statistical analyses with dissolved oxygen, temperature, influent silver, biomass (MLSS), flow rate, and influent nitrite, cadmium and chromium concentrations. Overall, our results suggest patterns of bacterial community dynamics likely regulated in part by operational parameters and provide evidence that the taxa-time relationship may be a fundamental ecological pattern in macro- and microbial systems.     

Microbial community distribution and activity dynamics of granular biomass in a CANON reactor

The application of microelectrodes to measure oxygen and nitrite concentrations inside granules operated at 20 °C in a CANON (Complete Autotrophic Nitrogen-removal Over Nitrite) reactor and the application of the FISH (Fluorescent In Situ Hybridization) technique to cryosectioned slices of these granules showed the presence of two differentiated zones inside of them: an external nitrification zone and an internal anammox zone. The FISH analysis of these layers allowed the identification of Nitrosomonas spp. and Candidatus Kuenenia Stutgartiensis as the main populations carrying out aerobic and anaerobic ammonia oxidation, respectively.Concentration microprofiles measured at different oxygen concentrations in the bulk liquid (from 1.5 to 35.2 mg O₂ L⁻¹) revealed that oxygen was consumed in a surface layer of 100-350 μm width. The obtained consumption rate of the most active layers was of 80 g O₂ (L_granule)⁻¹ d⁻¹. Anammox activity was registered between 400 and 1000 μm depth inside the granules. The nitrogen removal capacity of the studied sequencing batch reactor containing the granular biomass was of 0.5 g N L⁻¹ d⁻¹. This value is similar to the mean nitrogen removal rate obtained from calculations based on in- and outflow concentrations.Information obtained in the present work allowed the establishment of a simple control strategy based on the measurements of NH₄⁺ and NO₂⁻ in the bulk liquid and acting over the dissolved oxygen concentration in the bulk liquid and the hydraulic retention time of the reactor.     

Rapid and direct estimation of active biomass on granular activated carbon through adenosine tri-phosphate (ATP) determination

Granular activated carbon (GAC) filtration is used during drinking water treatment for the removal of micropollutants such as taste and odour compounds, halogenated hydrocarbons, pesticides and pharmaceuticals. In addition, the active microbial biomass established on GAC is responsible for the removal of biodegradable dissolved organic carbon compounds present in water or formed during oxidation (e.g., ozonation and chlorination) processes. In order to conduct correct kinetic evaluations of DOC removal during drinking water treatment, and to assess the state and performance of full-scale GAC filter installations, an accurate and sensitive method for active biomass determination on GAC is required. We have developed a straight-forward method based on direct measurement of the total adenosine tri-phosphate (ATP) content of a GAC sample and other support media. In this method, we have combined flow-cytometric absolute cell counting and ATP analysis to derive case-specific ATP/cell conversion values. In this study, we present the detailed standardisation of the ATP method. An uncertainty assessment has shown that heterogeneous colonisation of the GAC particles makes the largest contribution to the combined standard uncertainty of the method. The method was applied for the investigation of biofilm formation during the start-up period of a GAC pilot-scale plant treating Lake Zurich water. A rapid increase in the biomass of up to 1.1 x 10(10)cells/g GAC dry weight (DW) within the first 33 days was observed, followed by a slight decrease to an average steady-state concentration of 7.9 x 10(9)cells/g GAC DW. It was shown that the method can be used to determine the biomass attached to the GAC for both stable and developing biofilms.     

Characterization and treatability of aerobic bacterial thermophilically treated wastewater by a conventional activated sludge and granular activated carbon

An industrial wastewater that was pretreated by an aerobic thermophilic bacterial consortium (THE) was subjected to additional treatability studies by granular activated carbon (GAC) and a conventional activated sludge (CAS). The removal of dissolved organic carbon (DOC) in both systems was generally found to be similar. While GAC was able to attain better effluent concentrations of toluene and methyl isobutyl ketone (MIBK), the CAS was much more efficient at removing acetone. Furthermore, unlike the GAC, the performance of the CAS was not influenced by the high degree of variability in the influent wastewater. Characterization of the influent thermophilic wastewater using gas chromatography-mass spectroscopy (GC/MS) was performed to quantify the micropollutants as well as to evaluate removal efficiencies from the GAC and CAS systems.     

Impact of UV disinfection on microbially available phosphorus,organic carbon,and microbial growth in drinking water

UV irradiation at a wavelength of 253.7 nm (UV(254)) is commonly used for drinking water disinfection. UV radiation is known to convert organically combined phosphorus to orthophosphate and to degrade natural organic matter. We studied if UV disinfection increases the amount of microbially available forms of organic carbon and phosphorus in drinking waters with different characteristics, and if these changes in water chemical quality could enhance the microbial growth in drinking water. The UV(254) dose (15-50 mWs/cm(2)) used in waterworks reduced the concentration of assimilable organic carbon and the sum of the molecular size fractions. The release of microbially available phosphorus needed higher doses (204 mWs/cm(2)) of UV(254) radiation. Of bacteria in drinking water, 90% were inactivated with UV(254)-irradiation doses below 50 mWs/cm(2). A high dose (501 mWs/cm(2)) of UV(254) radiation inhibited the microbial growth in water.     

Development of biomass in a drinking water granular active carbon (GAC) filter

Indigenous bacteria are essential for the performance of drinking water biofilters, yet this biological component remains poorly characterized. In the present study we followed biofilm formation and development in a granular activated carbon (GAC) filter on pilot-scale during the first six months of operation. GAC particles were sampled from four different depths (10, 45, 80 and 115 cm) and attached biomass was measured with adenosine tri-phosphate (ATP) analysis. The attached biomass accumulated rapidly on the GAC particles throughout all levels in the filter during the first 90 days of operation and maintained a steady state afterward. Vertical gradients of biomass density and growth rates were observed during start-up and also in steady state. During steady state, biomass concentrations ranged between 0.8-1.83 x 10⁻⁶ g ATP/g GAC in the filter, and 22% of the influent dissolved organic carbon (DOC) was removed. Concomitant biomass production was about 1.8 × 10¹² cells/m²h, which represents a yield of 1.26 × 10⁶ cells/μg. The bacteria assimilated only about 3% of the removed carbon as biomass. At one point during the operational period, a natural 5-fold increase in the influent phytoplankton concentration occurred. As a result, influent assimilable organic carbon concentrations increased and suspended bacteria in the filter effluent increased 3-fold as the direct consequence of increased growth in the biofilter. This study shows that the combination of different analytical methods allows detailed quantification of the microbiological activity in drinking water biofilters.     

Predominance of ammonia-oxidizing archaea on granular activated carbon used in a full-scale advanced drinking water treatment plant

Ozonation followed by granular activated carbon (GAC) is one of the advanced drinking water treatments. During GAC treatment, ammonia can be oxidized by ammonia-oxidizing microorganisms associated with GAC. However, there is little information on the abundance and diversity of ammonia-oxidizing microorganisms on GAC. In this study, the nitrification activity of GAC and the settlement of ammonia-oxidizing archaea (AOA) and bacteria (AOB) in GAC were monitored at a new full-scale advanced drinking water treatment plant in Japan for 1 year after plant start-up. Prechlorination was implemented at the receiving well for the first 10 months of operation to treat ammonia in raw water. During this prechlorination period, levels of both AOA and AOB associated with GAC were below the quantification limit. After prechlorination was stopped, 10⁵ copies g-dry⁻¹ of AOA amoA genes were detected within 3 weeks and the quantities ultimately reached 10⁶-10⁷ copies g-dry⁻¹, while levels of AOB amoA genes still remained below the quantification limit. This observation indicates that AOA can settle in GAC rapidly without prechlorination. The nitrification activity of GAC increased concurrently with the settlement of AOA after prechlorination was stopped. Estimation of in situ cell-specific ammonia-oxidation activity for AOA on the assumption that only AOA and AOB determined can contribute to nitrification suggests that AOA may account for most of the ammonia-oxidation. However, further validation on AOB contribution is required.     

丽水市某居住小区雨水收集利用方案设计分析

以丽水市某住宅小区为例,通过对丽水市雨水利用的技术、经济与生态环境现状的分析,提出了针对丽水市降雨特点的小区雨水利用的途径和相应措施,为缓解丽水市水资源短缺问题提供指导。     

Anaerobic acidogenic digestion of olive mill wastewaters in biofilm reactors packed with ceramic filters or granular activated carbon

Four identically configured anaerobic packed bed biofilm reactors were developed and employed in the continuous acidogenic digestion of olive mill wastewaters to produce volatile fatty acids (VFAs), which can be exploited in the biotechnological production of polyhydroxyalkanoates. Ceramic porous cubes or granular activated carbon were used as biofilm supports. Aside packing material, the role of temperature and organic loading rate (OLR) on VFA production yield and mixture composition were also studied. The process was monitored through a chemical, microbiological and molecular biology integrated procedure. The highest wastewater acidification yield was achieved with the ceramic-based technology at 25 °C, with an inlet COD and an OLR of about 17 g/L and 13 g/L/day, respectively. Under these conditions, about the 66% of the influent COD (not including its VFA content) was converted into VFAs, whose final amount represented more than 82% of the influent COD. In particular, acetic, propionic and butyric acids were the main VFAs by composing the 55.7, 21.5 and 14.4%, respectively, of the whole VFA mixture. Importantly, the relative concentrations of acetate and propionate were affected by the OLR parameter. The nature of the packing material remarkable influenced the process performances, by greatly affecting the biofilm bacterial community structure. In particular, ceramic cubes favoured the immobilization of Firmicutes of the genera Bacillus, Paenibacillus and Clostridium, which were probably involved in the VFA producing process.     

Biosorption and dynamics of bacterial populations in activated sludge

Nutritional relations are determining factors in the biological competition between filamentous and floc-forming microorganisms of activated sludge. Biosorption reflects the behaviour of microorganisms in relation to a given substrate. The results obtained from nearly 600 measurements of biosorption carried out in 11 wastewater treatment plants are presented. Biosorption of non-filamentous sludge is less than 30 mg COD/g SS for a 100 mg COD/g SS floc loading. Biosorption increases appreciably with the sludge volume index (SVI). These investigations provide a better understanding of the mechanisms involved in the contact zones. These techniques are successfully experimented in some cases of bulking where biosorption was at least equal to 40 mg COD/g SS.     

Single and competitive adsorption of Cd and Zn onto a granular activated carbon

Single and competitive adsorption of cadmium and zinc onto granular activated carbon DARCO 12–20 mesh has been investigated. This activated carbon has been shown as an effective adsorbent for both metals. Cadmium and zinc removals increased with pH and decreased with molar metal/carbon ratio. Surface precipitation phenomena have been detected for the higher pHs and molar ratios. The adsorption process has been modelled on the surface complexation Triple Layer Model (TLM). For this purpose, the amphoteric nature of the activated carbon has been studied. Single metal adsorption data have been used to calibrate TLM parameters. A dependence of the adsorption constants on pH and molar metal/carbon ratio has been observed, and a correlation for log K_ads has been determined. In the competitive system, the removal efficiency of the activated carbon decreased for both metals. The TLM model, using surface complexation constants determined from single adsorption experiments, successfully predicted cadmium and zinc removal from the two metal solutions.     

Improvement of RNA-SIP by pyrosequencing to identify putative 4-n-nonylphenol degraders in activated sludge

Nonylphenols (NP) have estrogenic potential because of their phenolic ring, but the organisms involved in the degradation of this alkylated phenol remain unidentified. Using 16S ribosomal RNA (rRNA)-based stable isotope probing (SIP) and a new method based on pyrosequencing, we identified the bacteria involved in the degradation of the aromatic ring of [U-ring-¹³C] 4-n-NP in aerobic sludge. The first order degradation rate of 4-n-NP was 5.5 d⁻¹. Single strand conformation polymorphism of density-separated labeled and unlabeled 16S rRNA showed significant differences and enabled selection of four representative fractions for pyrosequencing. Nineteen phylotypes showed a significant enrichment in the heavy fraction in the labeled pulse. The relative abundances of these phylotypes were combined with the RNA concentration of each fraction to yield a simple model of the distribution of each phylotype across the gradient. This model was used to estimate the percentage of labeling for each phylotype. The sequences showing the highest labeling (11%) were closely related to Afipia sp. but represented only 2 % of the RNA in the heavy fraction of the labeled pulse. The sequences representing the largest proportion of the RNA in the heavy fraction were related to Propionibacterium acnes and Frateuria aurantia, which are known to possess enzymes for phenol degradation. The model shows that despite Afipia having the highest ¹³C enrichment, other species encoding phenol degradation pathways are responsible for more ¹³C incorporation. Last, we showed that some species represent 12% of the total RNA but contain only 1% ¹³C above natural abundance.     

Evaluation and improvement of total organic bromine analysis with respect to reductive property of activated carbon

A collective parameter and a toxicity indicator for all the halogenated organic disinfection byproducts in a water sample is total organic halogen (TOX), which can be differentiated as total organic chlorine (TOCl), total organic bromine (TOBr) and total organic iodine. The TOX method involves concentration of organic halogens from water by adsorption onto activated carbon (AC). A previous study showed that a portion of TOCl can be reduced to chloride during the adsorption procedure, which can be minimized by ozonation of the AC. In this study, a portion of TOBr was sometimes found to be reduced by AC to bromide, and the reduction was generally less than that of corresponding TOCl. The results suggested that around 10% of brominated Suwannee River fulvic acid was reduced to bromide. However, some brominated amino compounds (especially glycylglycine, phenylalanine, and cytosine) were found to be more reactive with the AC. For the iodinated compounds studied, the reduction to iodide was not significant. The method for the TOBr measurement was improved by using ozonated AC when reduction occurred on the original AC. The improved method was also evaluated on treated wastewater and swimming pool water samples.     

The characteristics of the bacterial community structure and population dynamics for phosphorus removal in SBR activated sludge processes

The characteristics of the bacterial community structure and population dynamics for phosphorus removal in activated sludge were investigated using laboratory-scale sequencing batch reactor (SBR) activated sludge processes fed with four different carbon sources. Phosphorus removal activity, quinone profile of the activated sludge and isolated bacterial strains were monitored. An enhanced phosphorus removal activity was accompanied by the increase in ubiquinone-9 (Q-9). The relationships between phosphorus removal activity and Q-9 contents of the isolated bacterial strains were dependent neither on the organic substrates nor on the species of isolated bacterial strains. The enhanced phosphorus removal capability of activated sludge seemed to be due to the increase in the populations of bacteria with activity of phosphorus removal, i.e. species succession of bacteria in activated sludge ecosystems, rather than the increase in the phosphorus removal capability of phosphorus removal bacteria. Not only Acinetobacter but also Pseudomonas identified from isolated strains were regarded as representative polyphosphates-accumulating organisms and predominant species to the whole of bacterial population in activated sludge for phosphorus removal.     

Effect of natural organic matter on powdered activated carbon adsorption of trace contaminants: characteristics and mechanism of competitive adsorption

Batch adsorption experiments using powdered activated carbon (PAC) to remove trace synthetic organic chemicals (SOCs) from water containing natural organic matter (NOM) were conducted. The percentage of SOC removed at any contact time and at any PAC dose was observed to be independent of the initial SOC concentration. Equations derived from the ideal adsorbed solution theory and the pore surface diffusion model validated this observation. For the strongly adsorbing SOCs (simazine and simetryn), the percentage of SOC removed was independent only at low initial SOC concentrations. The NOM fraction competing with the weakly adsorbing SOC (asulam) constituted a larger percentage of the total NOM than that competing with the strongly adsorbing SOCs. Although the adsorptive capacities of the SOCs were greatly reduced in water containing NOM compared with those in pure water, the change in the pore diffusion coefficient was insignificant. Therefore, NOM competed with the SOCs for adsorption sites, reducing the adsorptive capacity, but the amount of NOM loading was not so severe that it blocked or filled the pores, hindering the internal diffusion of the SOCs.     

Biological treatment of H(2)S using pellet activated carbon as a carrier of microorganisms in a biofilter

Biological treatment is an emerging technology for treating off-gases from wastewater treatment plants. The most commonly reported odourous compound in off-gases is hydrogen sulfide (H(2)S), which has a very low odor threshold. This study aims to evaluate the feasibility of using a biological activated carbon as a novel packing material, to achieve a performance-enhanced biofiltration processes in treating H(2)S through an optimum balance and combination of the adsorption capacity with the biodegradation of H(2)S by the bacteria immobilized on the material. The biofilm was mostly developed through culturing the bacteria in the presence of carbon pellets in mineral media. Scanning electron microscopy (SEM) was used to identify the biofilm development on carbon surface. Two identical laboratory scale biofilters, one was operated with biological activated carbon (BAC) and another with virgin carbon without bacteria immobilization. Various concentrations of H(2)S (up to 125 ppmv) were used to determine the optimum column performance. A rapid startup (a few days) was observed for H(2)S removal in the biofilter. At a volumetric loading of 1600 m(3)m(-3)h(-1) (at 87 ppmv H(2)S inlet concentration), elimination capacity of the BAC (181 gH(2)Sm(-3)h(-1)) at removal efficiency (RE) of 94% was achieved. If the inlet concentration was kept at below 30 ppmv, high H(2)S removal (over 99%) was achieved at a gas retention time (GRT) as low as 2s, a value, which is shorter than most previously reported for biofilter operations. The bacteria population in the acidic biofilter demonstrated capacity for removal of H(2)S in a broad pH range (pH 1-7). There are experimental evidences showing that the spent BAC could be re-used as packing material in a biofilter based on BAC. Overall, the results indicated that an unprecedented performance could be achieved by using BAC as the supporting media for H(2)S biofiltration.     

Assessment of activated sludge microbial community analysis in full-scale biological wastewater treatment plants using patterns of fatty acid isopropyl esters (FAPEs)

This investigation introduces the application of a relatively rapid technique to obtain information about the dynamic nature of microbial communities in activated sludge. The objective has been to consider variability due to measurement errors and protocol changes within the same quantitative framework as the analysis of systematic differences in microbial communities in large-scale aerobic activated sludge secondary wastewater treatment systems. Adjustments to the methodology were considered due to their potential for simplifying and shortening the analysis procedure. All modifications to the protocols used to assay the composition of microbial fatty acids (MFAs) of activated sludge imposed some bias to the chromatographic data. This methodological bias was similar in magnitude to the level of discrimination between activated sludge microbial community structures that were considered as part of the present study. MFA analysis supported the expectations of subtle but systematic community structure differences and shifts in activated sludge based on the current understanding of these wastewater treatment systems. A standardized MFA methodology was shown to be sensitive to minor systematic changes in activated sludge communities due the anticipated underlying factors of selective pressures from the process configuration, history, operational conditions and/or nutrient status. The chemometric approach of fatty acid isopropyl ester analysis of activated sludge can provide a routine tool for meaningful and quantitative information of changes in activated sludge quality in full-scale treatment systems.     

Application of a three-component competitive adsorption model to evaluate and optimize granular activated carbon systems

A recently developed kinetic model for granular activated carbon (GAC) adsorbers (COMPSORB-GAC) that quantitatively describes the adsorption of trace organic contaminant in the presence of competing natural organic matter (NOM) was applied to evaluate the performance of different GAC system configurations: conventional fixed-bed adsorbers, layered upflow carbon adsorbers (LUCA), and moving-bed adsorbers (with few or many bed sections). COMPSORB-GAC separately tracks the adsorption of three components: a trace compound, a strongly competing NOM fraction that reduces trace compound equilibrium capacity, and a pore-blocking NOM fraction that reduces kinetics. Performance was simulated for various design criteria and with model parameters derived for two natural waters with significantly different NOM concentrations. For the range of simulated conditions and with baseline performance defined by a fixed-bed adsorber, LUCA generally reduced carbon usage rates (CURs) by 15-35%. A 2-section and a 16-section moving-bed reactor reduced baseline CURs by 20-30% and 45-55%, respectively. Projected CURs for the water source with a relatively high NOM concentration were 2-3 times higher for all reactor configurations and indicated that NOM preloading would cause performance deterioration in deep GAC beds, which highlights the importance of source water quality. These results show how COMPSORB-GAC can be used in a comprehensive, site-specific optimization of GAC systems to ensure robust system performance and to balance capital and operating costs.     

Seasonal bacterial community dynamics in a full-scale enhanced biological phosphorus removal plant

Activated sludge is one of the most abundant and effective wastewater treatment process used to treat wastewater, and has been used in developed countries for nearly a century. In all that time, several hundreds of studies have explored the bacterial communities responsible for treatment, but most studies were based on a handful of samples and did not consider temporal dynamics. In this study, we used the DNA fingerprinting technique called automated ribosomal intergenic spacer region analysis (ARISA) to study bacterial community dynamics over a two-year period in two different treatment trains. We also used quantitative PCR to measure the variation of five phylogenetically-defined clades within the Accumulibacter lineage, which is a model polyphosphate accumulating organism. The total bacterial community exhibited seasonal patterns of change reminiscent of those observed in lakes and oceans. Surprisingly, all five Accumulibacter clades were present throughout the study, and the total Accumulibacter community was relatively stable. However, the abundance of each clade did fluctuate through time. Clade IIA dynamics correlated positively with temperature (ρ = 0.65, p < 0.05) while Clade IA dynamics correlated negatively with temperature (ρ = −0.35, p < 0.05). This relationship with temperature hints at the mechanisms that may be driving the seasonal patterns in overall bacterial community dynamics and provides further evidence for ecological differentiation among clades within the Accumulibacter lineage. This work provides a valuable baseline for activated sludge bacterial community variation.     

Effect of chemical and physical parameters on a pulp mill biotreatment bacterial community

The bacterial community composition in an activated sludge plant treatment from a bleached kraft pulp mill was monitored over a period of 209 days. Using DGGE and terminal-Restriction Fragment Length Polymorphism (t-RFLP) analysis we generated community DNA fingerprints over the time period. Both methods produce fingerprints that can be used to monitor stability in the system and generate fragments that can be associated with bacterial taxa. Chemical and physical parameters were also collected during that same time frame. We found a number of significant correlations with influent variables such as temperature, chemical oxygen demand (COD), Biochemical oxygen demand (BOD) and chloroform concentrations suggesting that these were the most likely parameters to influence the bacterial community structure. In addition several taxa correlated to important performance indicators such as COD/BOD removals and SVI. Multivariate analysis also confirmed the strong links between taxa variation and temperature, nutrient loads, chloroform and also one class of filaments. Establishing the identity of these taxa and their ecological preferences will greatly enhance our understanding and management of biological treatment systems.