Development of a Self‐Adaptive Direct Methanol Fuel Cell Fed with 20 M Methanol

A passive and self‐adaptive direct methanol fuel cell (DMFC) directly fed with 20 M of methanol is developed for a high energy density of the cell. By using a polypropylene based pervaporation film, methanol is supplied into the DMFC's anode in vapor form. The mass transport of methanol from the cartridge to the anodic catalyst layer can be controlled by varying the open ratio of the anodic bipolar plate and by tuning the hydrophobicity of anodic diffusion layer. An effective back diffusion of water from the cathode to the anode through Nafion film is carried out by using an additive microporous layer in the cathode that consists of 50 wt.% Teflon and KB‐600 carbon. Accordingly, the water back diffusion not only ensures the water requirement for the methanol oxidation reaction but also reduces water accumulation in the cathode and then avoids serious water flooding, thus improving the adaptability of the passive DMFC. Based on the optimized DMFC structure, a passive DMFC fed with 20 M methanol exhibits a peak power density of 42 mW cm^–2 at 25 °C, and no obvious performance degradation after over 90 h continuous operation at a constant current density of 40 mA cm^–2.     

AC‐Impedance Investigation of Different MEA Configurations for Passive‐Mode DMFC Mini‐Stack Applications

Membrane‐electrode assemblies (MEAs) characterised by different hydrophobic–hydrophilic properties were investigated in a passive Direct methanol fuel cell (DMFC) monopolar mini‐stack at room temperature. These properties were modulated by varying the amount of Nafion or replacing the ionomer in the catalytic layer with polytetrafluoroethylene (PTFE). Impedance spectroscopy provided valuable information with respect to the limiting processes occurring during fuel cell operation. Methanol crossover, especially in the presence of high methanol concentration, played a major role in determining the overall performance. The development of a methanol impermeable membrane appears crucial for increasing the performance of DMFC devices for portable applications.     

Model for the Degradation Performance of a Single‐Cell Direct Methanol Fuel Cell under Varying Operational Conditions

The effect of varying operating parameters on the degradation of a single‐cell direct methanol fuel cell (DMFC) with serpentine flow channels was investigated. Fuel cell internal temperature, methanol concentration, and air and methanol flow rates were varied in experimental tests and fuel cell performance was chronologically recorded. A DMFC semi‐empirical performance model was developed to predict the polarization curves of the DMFC and validated at different operating conditions. Performance degradation was observed and modeled over time by a linear regression model. Unlike previous studies, the cumulative exposure of the operating factors to the fuel cell was considered in the degradation analysis. The degradation model shows the cell voltage generation capacity does not significantly degrade. However, the Tafel slope of the cell changes with cumulative exposure to methanol concentration and air flow, and the ohmic resistance changes with cumulative exposure to temperature, methanol and air flow.     

Analysis of Direct Methanol Fuel Cell (DMFC)‐Performance via FTIR Spectroscopy of Cathode Exhaust

Water and methanol flux through Nafion™ and polyaryl‐blend membranes prepared at ICVT were studied under DMFC operation. The water, methanol, and CO₂ content in the cathode exhaust were measured by FTIR spectroscopy. Both the water and methanol flux turned out to be strongly dependent on the operating temperature and thus on membrane swelling. Apart from this, water flux through the membrane is primarily affected by the gas volume flux on the cathode side. A coupling between water flux and methanol flux was observed, which leads to the conclusion that methanol is transported both by diffusion and by convection caused by the superimposed water flux. Polyaryl‐blend membranes showed a reduced diffusive methanol transport when compared to Nafion™ due to their different internal microstructure. The impact of methanol cross‐over on cathode losses at high current density needs further clarification with respect to the prevailing mechanism of methanol oxidation at the cathode.     

Tubular Cathode Prepared by a Dip‐Coating Method for Low Temperature DMFC

A novel tubular cathode for the direct methanol fuel cell (DMFC) is proposed, based on a tubular titanium mesh. A dip‐coating method has been developed for its fabrication. The tubular cathode is composed of titanium mesh, a cathode diffusion layer, a catalyst layer, and a recast Nafion® film. The titanium mesh is present at the inner circumference of the diffusion layer, while the recast Nafion® film is at the outer circumference of the catalyst layer. A DMFC single cell with a 3.5 mgPt cm^–2 tubular cathode was able to perform as well, in terms of power density, as a conventional planar DMFC. A peak power density of 9 mW cm^–2 was reached under atmospheric air at 25 °C.     

Operation Characteristic Analysis of a Direct Methanol Fuel Cell System Using the Methanol Sensor‐less Control Method

The application of methanol sensor‐less control in a direct methanol fuel cell (DMFC) system eliminates most of the problems encountered when using a methanol sensor and is one of the major solutions currently used in commercial DMFCs. This study focuses on analyzing the effect of the operating characteristics of a DMFC system on its performance under the methanol sensor‐less control as developed by Institute of Nuclear Energy Research (INER). Notably, the influence of the dispersion of the methanol injected on the behavior of the system is investigated systematically. In addition, the mechanism of the methanol sensor‐less control is investigated by varying factors such as the timing of the injection of methanol, the cathode flow rate, and the anode inlet temperature. These results not only provide insight into the mechanism of methanol sensor‐less control but can also aid in the improvement and application of DMFC systems in portable and low‐power transportation.     

Portable Size DMFC‐Stack

A small, low temperature, direct methanol fuel cell stack for portable applications has been developed. Several flow field designs were investigated with respect to stable operation and high performance. Due to carbon dioxide and water production on the anode and cathode, respectively, methanol and oxygen access to the electrodes is hindered. During single cell operation the effect of both carbon dioxide evolution and water production on the current output was observed. The difference between parallel and serial feeding of both fuel and oxidant to the DMFC stack was also investigated. It was found that it is very important to remove reaction products from the active cell surface in order to ensure stable stack operation at low temperatures. The maximal power realised with the 12‐cell direct methanol fuel cell stack was 30 W.     

Performance evaluation of the incorporation of different wire meshes in between perforated current collectors and membrane electrodeassembly on the Passive Direct methanol fuel cell

Passive Direct methanol fuel cells (DMFC) are more suitable for charging small capacity electronic devices. In passive DMFC, the fuel and oxidant are supplied by diffusion and natural convection process on the anode and cathode sides respectively. Current collectors (CC) play a vital importance in fuel cell performance. This paper presents the combined impact of perforated and wire mesh current collectors (WMCC) on passive DMFC performance. Three types of open ratios of perforated current collectors (PCC), such as 45.40％, 55.40％and 63.40％and two types of wire mesh current collectors with open ratios of 38.70％and 45.40％were chosen for the experimental work. A combination of Taguchi-L9 rule is con-sidered. A combination of three PCC and two WMCC on both anode and cathode was used. Methanol con-centration was varied from 1 mol·L-1–5 mol·L-1 for nine combinations of PCC and WMCC. From the experimental results, it is noticed that the combination of PCC and WMCC with an open ratio of 55.40％ and 38.70％ incorporated passive DMFC produced peak power density at 5 mol·L-1 of methanol concentration. The passive DMFC performance was evaluated in terms of maximum power density and maximum current density. The combined current collectors of PCC and WMCC open ratios of 55.40％+38.70％ have more stable voltage than single PCC of open ratio 63.40％ at 4 mol·L-1 of methanol concentration.     

Electrochemical Evaluation of Porous Non‐Platinum Oxygen Reduction Catalysts for Polymer Electrolyte Fuel Cells

A porous non‐platinum electrocatalyst for the oxygen reduction reaction (ORR), obtained by pyrolysing a cobalt porphyrin precursor, was evaluated by electrochemical means. The reactivity of the non‐platinum ORR catalyst was investigated with a rotating disc electrode (RDE) experimental set up. RDE data were collected in an acidic electrolyte containing N₂, O₂, CO and under mixed reactant O₂/methanol conditions. The electrochemical performance of such‐obtained non‐platinum catalyst is discussed and compared to platinum‐based ORR catalysts. Based on the results collected here, we are able to propose and test possible proton exchange fuel cell (PEFC) operating conditions where non‐platinum ORR catalysts can be utilised. Direct methanol fuel cell (DMFC) data demonstrating a superior performance of the non‐platinum catalyst relative to platinum black, often perceived as the state‐of‐the‐art oxygen–reduction catalyst for the DMFC cathode is presented.     

Fabrication of Function‐Graded Proton Exchange Membranes for Direct Methanol Fuel Cells Using Electron Beam‐Grafting

Function‐graded proton exchange membranes (G‐PEMs) based on poly(tetrafluoroethylene‐co‐hexafluoropropylene) were fabricated for direct methanol fuel cells (DMFCs) via electron beam‐grafting using the heterogeneous energy deposition technique. The G‐PEMs had a water uptake gradient in the proton transfer direction, originating from the sulfonic acid group gradient. The distribution of sulfonic acid groups in the various G‐PEMs was evaluated using X‐ray photoelectron spectroscopy. Four types of PEMs (flat‐type, strong‐gradient, meso‐gradient, and weak‐gradient types) were fabricated. By varying the direction of the G‐PEMs, the methanol permeation test and DMFC operation were performed with two orientations of the sulfonic acid group gradient, decreasing from the methanol injection (anode) side (decrease‐type) or the other (cathode) side (increase‐type). The methanol permeability of the strong‐gradient, meso‐gradient, and weak‐gradient G‐PEMs was lower than that of Nafion®117 and the flat‐type PEM. The “increase‐type” orientation of the strong‐gradient G‐PEM resulted in the lowest methanol permeability. The DMFC performance of the G‐PEMs was influenced by the thickness direction, such as “decrease‐type” and “increase‐type.” The performance of the “decrease‐type” assembly was higher than that of the “increase‐type.” The “decrease‐type” assembly with P‐200 k (weak‐gradient G‐PEM) exhibited the highest performance of the fabricated PEMs, comparable to that of Nafion®117.     

Operating Temperature Dependency on Performance Degradation of Direct Methanol Fuel Cells

The effect of operating temperature on performance degradation of direct methanol fuel cell (DMFCs) is examined to disclose the main parameter of the degradation mechanism and the degradation pattern in the membrane electrode assemblies (MEAs). The DMFC MEA degradation phenomenon is explained through the use of various electrochemical/physicochemical tools, such as electrochemical impedance spectroscopy, electrode polarization, methanol stripping voltametry, field emission‐scanning electron microscopy, X‐ray diffraction, inductively coupled plasma‐atomic emission spectroscopy, and X‐ray photoelectron spectroscopy analysis. The operation of DMFC under high temperature accelerates the degradation process of the DMFC. The higher degradation rate under high temperature DMFC operation is mainly attributed to the formation of membrane pinhole with interfacial delamination and cathode degradation. A high operating temperature may result in more considerable thermal and mechanical stress of the polymeric membrane continuously due to frequent dry–wet cycling mode and substantial uneven distribution of water between the anode and the cathode during a long period of DMFC operation. On the other hand, the electrochemical surface area deterioration by Pt coarsening and ionomers loss is not directly related to the larger DMFC performance decay at high temperature.     

Porous current collectors for passive direct methanol fuel cells

A passive direct methanol fuel cell (DMFC) with its cathode current collector made of porous metal foam was investigated experimentally. The measured polarization curves, constant-current discharging behavior and EIS spectra showed that the passive DMFC having the porous current collector yielded much higher and much more stable performance than did the cell having the conventional perforated-plate current collector with high methanol concentration operation. It was demonstrated that the improved performance for the porous current collector was attributed to: (i) the enhanced oxygen transport on the cathode as a result of a larger specific transport area, (ii) the increased operating temperature as a result of the lower effective thermal conductivity of the porous structure, and (iii) the faster water removal as a result of the capillary action in the porous structure, The experimental results also revealed that the porous current collector with a smaller pore size yielded higher performance as a result of the lower cell resistance.     

Influence of copper oxide modification of a platinum cathode on the activity of direct methanol fuel cell

To determine whether a copper oxide modified Pt cathode (PtCuO_m) improves a performance of direct methanol fuel cells (DMFC), we performed structural and morphological analysis of the cathode and measured current-potential profile and impedance spectroscopy. Comparing with an unmodified Pt cathode, we found that PtCuO_m prepared by rf sputtering techniques induced higher oxygen reduction reaction rate and suppressed electrocatalytic oxidation of methanol, which is the main reason of the mixed potential occurred at a cathode. Therefore, PtCuO_m increased the power performance of DMFC applying both oxygen and air and electrochemical impedance spectra clearly supported the difference of the performance between unmodified and modified Pt electrodes. These results may play a role in better long-term stability of DMFC systems.     

A Factorial Study to Investigate the Purging Effect on the Performance of a Dead‐End Anode PEM Fuel Cell Stack

This paper presents an experimental investigation of the effect of hydrogen purging time period and duration on the performance of a proton exchange membrane (PEM) fuel cell stack with a dead‐end anode. The objective is to develop a better understanding of the interactions between the purging parameters and the cathode air‐stoichiometry. It employs a full factorial approach for three factors (purging period, purging duration and air‐stoichiometry) with two levels and three replications. The study is performed on a 300 cm², 24‐cell PEM fuel cell stack with the rated power of 1.5 kW. The stack was operated with water cooling, fully humidified air and dry hydrogen at the ambient pressure. The results showed that the stack performance is significantly influenced by the interactions of the purging parameters and the cathode air‐stoichiometry. The least square model was utilized to determine the optimum values of these parameters with regard to the stack performance and hydrogen utilization. For the present stack, the optimum values of parameters were: purging period of 3 min, purging duration of 4 s and the cathode air‐stoichiometry of 200%.     

A Sulfophenylated Polysulfone as the DMFC Electrolyte Membrane – an Evaluation of Methanol Permeability and Cell Performance

A sulfophenylated polysulfone (PSU‐sph), carrying 0.8 sulfonic acid units per repeating unit of the polymer, is evaluated as a membrane electrolyte for DMFC applications. The liquid uptake, methanol transport characteristics, electrolyte conductivity, and fuel cell performance are investigated. The methanol transport and DMFC performance results are compared to those of Nafion® 117. The PSU‐sph membrane investigated shows superior qualities with regard to methanol crossover, with a methanol permeability of approximately 25% compared to that of Nafion®. The conductivity was measured to be 15% compared to that of Nafion®. However, this could not fully account for the internal resistance of the cell, implying that the contact resistance between the electrodes and electrolyte is higher when PSU‐sph is used, probably because the electrodes are developed for use with Nafion® membranes. The stability of the PSU‐sph membrane seems promising, with very low degradation observed over a period of 72 hours. It was concluded that although the mass transport properties of the PSU‐sph membrane sample investigated were superior, it could not match the performance of Nafion® 117 in a DMFC application. However, a higher degree of sulfonation may have a significant positive effect on cell performance. The results also showed that a fully intergrated MEA is needed to fully assess new menbrane materials.     

DMFC at low air flow operation: Study of parasitic hydrogen generation

In this paper, the effect of hydrogen generation in direct methanol fuel cells (DMFC) is described. Under certain operating conditions hydrogen generation occurs in DMFC causing an additional methanol consumption and a decrease of the cell voltage.For the present experiments a segmented cell with an active area of 244 cm² is used. The cell has 196 segments which are regularly distributed on the whole area. By this experimental setup hydrogen generation was found in regions with insufficient air supply. Hydrogen generation was analyzed by systematically applying different air flow rates and detecting the local current densities. The theory for hydrogen generation is confirmed by the results obtained from the segmented cell. A correlation between open circuit voltage (OCV), air flow rate and hydrogen generation was observed. Furthermore, half-cell measurements with different methanol concentrations were performed and used for analyzing the processes during hydrogen generation.The work clearly indicates the importance of sufficient cathode air supply for DMFC. Starved cathode areas not only do not contribute to the overall current generation but in addition reduce the power and efficiency by the parasitic generation of hydrogen.     

Theoretical Model for the Optimal Design of Air Cooling Systems of Polymer Electrolyte Fuel Cells. Application to a High‐Temperature PEMFC

The cooling system of a high‐temperature PEM fuel cell with a nominal electric power of 1.5 kW for a combined heat and power unit (CHP) has been designed using a thermochemical model. The 1D model has been developed as a simple, predictive, and useful tool to evaluate, design, and optimize cooling systems of PEM fuel cells. As proved, it can also be used to analyze the influence of different operational and design parameters, such as the number and geometry of the channels, or the air flow rate, on the overall performance of the stack. To validate the model, predicted results have been compared with experimental measurements performed in a commercial 2 kW air‐forced open‐cathode stack. The model has then been applied to calculate the air flow required by the designed prototype stack as a function of the power output, as well as to analyze the influence of the cooling channels configuration (cross‐section geometry and number) on the heat management. Results have been used to select the optimum air‐fan cooling system, which is based on compact axial fans.     

Two‐Phase 1D+1D Model of a DMFC: Development and Validation on Extensive Operating Conditions Range

A two‐phase 1D+1D model of a direct methanol fuel cell (DMFC) is developed, considering overall mass balance, methanol transport in gas phase through anode diffusion layer, methanol and water crossover. The model is quantitatively validated on an extensive range of operating conditions, 24 polarisation curves. The model accurately reproduces DMFC performance in the validation range and, outside this, it is able to predict values under feasible operating conditions. Finally, the estimations of methanol crossover flux are qualitatively and quantitatively similar to experimental measures and the main local quantities' trends are coherent with results obtained with more complex models.     

Start‐Up Characteristics of Segmented‐In‐Series Tubular SOFC Power Modules Improved by Catalytic Combustion at Cathodes

For large‐scale SOFC power generation systems, a shorter start‐up time of SOFC cell stacks with relatively large heat capacity is one of the most important technological issues to determine the flexibility in SOFC system operation. In this study, start‐up procedures have been examined to shorten the start‐up time period. The conventional heating procedure using pre‐heated hot air and self‐heating by SOFC operation at low temperatures had a difficulty to shorten the start‐up time period because of the limitation in power generation at lower temperatures. In this study, as an alternative start‐up procedure, catalytic combustion at the SOFC cathodes is, for the first time, demonstrated to be useful on the system level. The applicability of the catalytic combustion to shorten the start‐up time period has been verified numerically as well as experimentally by using a large‐scale cell stack cartridge. This unique start‐up procedure enables to operate SOFC‐based large‐scale power generation systems.     

Optimization of operating parameters of a direct methanol fuel cell and physico-chemical investigation of catalyst–electrolyte interface

A physico-chemical investigation of catalyst–Nafion® electrolyte interface of a direct methanol fuel cell (DMFC), based on a Pt–Ru/C anode catalyst, was carried out by XRD, SEM-EDAX and TEM. No interaction between catalyst and electrolyte was detected and no significant interconnected network of Nafion micelles inside the composite catalyst layer was observed. The influence of some operating parameters on the performance of the DMFC was investigated. Optimal conditions were 2 M methanol, 5 atm cathode pressure and 2–3 atm anode pressure. Power densities of 110 and 160 mW cm⁻² were obtained for operation with air and oxygen, respectively, at temperatures of 95–100°C and with 1 mg cm⁻² Pt loading.