Investigation on the miscibility of the blends of poly(methyl methacrylate) and poly(styrene‐co‐acrylonitrile)

The miscibility was investigated in blends of poly(methyl methacrylate) (PMMA) and styrene‐acrylonitrile (SAN) copolymers with different acrylonitrile (AN) contents. The 50/50 wt % blends of PMMA with the SAN copolymers containing 5, 35, and 50 wt % of AN were immiscible, while the blend with copolymer containing 25 wt % of AN was miscible. The morphologies of PMMA/SAN blends were characterized by virtue of scanning electron microscopy and transmission electron microscopy. It was found that the miscibility of PMMA/SAN blends were in consistence with the morphologies observed. Moreover, the different morphologies in blends of PMMA and SAN were also observed. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Free volume as an internal material parameter to probe interfaces in ternary polymer blends: A positron lifetime study

A new method to characterize individual interfaces in ternary polymer blends from experimentally measured fractional free volume from Positron Annihilation Lifetime Spectroscopy (PALS) has been developed. By this, we derive the composition dependent miscibility level in ternary polymer blends. This method has its genesis in KRZ (Kirkwood–Risemann–Zimm) theory which introduces hydrodynamic interaction parameter as a measure of excess friction generated at the interface between dissimilar polymer chains resulting in energy dissipation. The method successfully applied for binary blends has been theoretically modified to suit ternary blends in the present work. The efficacy of this method has been tested for two ternary blends namely polycaprolactone/poly(styrene‐co‐acrylonitrile)/poly(vinyl chloride) (PCL/SAN/PVC) and polycaprolactone/poly(vinyl chloride)/poly(vinyl acetate) (PCL/PVC/PVAc) in different compositions. We obtained a maximum effective hydrodynamic interaction (α_eff) of ?12.60 at composition 80/10/10 of PCL/PVC/PVAc while PCL/SAN/PVC showed ?1.60 at 68/16/16 composition. These results suggest that these compositions produce high miscibility level as compared to other compositions. DSC measurements have also been used to supplement positron results. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3335–3344, 2013     

Effect of bisphenol A on the miscibility,phase morphology,and specific interaction in immiscible biodegradable poly(ε‐caprolactone)/poly(L‐lactide) blends

We have investigated the enhancement in miscibility, upon addition of bisphenol A (BPA) of immiscible binary biodegradable blends of poly(ε‐caprolactone) (PCL) and poly(L ‐lactide) (PLLA). That BPA is miscible with both PCL and PLLA was proven by the single value of T_g observed by differential scanning calorimetry (DSC) analyses over the entire range of compositions. At various compositions and temperatures, Fourier transform infrared spectroscopy confirmed that intermolecular hydrogen bonding existed between the hydroxyl group of BPA and the carbonyl groups of PCL and PLLA. The addition of BPA enhances the miscibility of the immiscible PCL/PLLA binary blend and transforms it into a miscible blend at room temperature when a sufficient quantity of the BPA is present. In addition, optical microscopy (OM) measurements of the phase morphologies of ternary BPA/PCL/PLLA blends at different temperatures indicated an upper critical solution temperature (UCST) phase diagram, since the ΔK effect became smaller at higher temperature (200°C) than at room temperature. An analysis of infrared spectra recorded at different temperatures correlated well with the OM analyses. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1146–1161, 2006     

Toughness,dynamic mechanical property,and morphology of polyvinylchloride/acrylonitrile‐styrene‐butyl acrylate blends

Acrylonitrile‐styrene‐butyl acrylate (ASA) graft copolymers with different acrylonitrile (AN) contents, the core‐shell ratio, and tert‐dodecyl mercaptan (TDDM) amounts were synthesized by seed emulsion polymerization. Polyvinylchloride (PVC)/ASA blends were prepared by melt blending ASA graft copolymers with PVC resin. Then the toughness, dynamic mechanical property, and morphology of the PVC/ASA blends were investigated. The results indicated that the impact strength of the PVC/ASA blends increased and then decreased with the increase of the AN content in poly(styrene‐co‐acrylonitrile (SAN) copolymer, and increased with the increase of the core‐shell ratio of ASA. It was shown that brittle‐ductile transition of PVC/ASA blends was dependent on poly(butyl acrylate) (PBA) rubber content in blends and independent of AN content in SAN copolymer. The introduction of TDDM made the toughness of PVC/ASA blends poor. Dynamic mechanical analysis (DMA) curves exhibited that PVC and SAN copolymers were immiscible over the entire AN composition range. From scanning electron microscopy (SEM), it was found that the dispersion of ASA in PVC/ASA blends was dependent on the AN content in SAN copolymer and TDDM amounts. J. VINYL ADDIT. TECHNOL., 22:43–50, 2016. © 2014 Society of Plastics Engineers     

Compatibility of poly(ϵ-caprolactone) (PCL) and poly(styrene-co-acrylonitrile) (SAN) blends. II. The influence of the AN content in SAN copolymer upon blend compatibility

The compatibility of polymer blends of poly(?-caprolactone) (PCL) and poly(styrene-co-acrylonitrile) (SAN) containing various acrylonitrile (AN) contents was studied to evaluate the influences of copolymer composition and PCL concentration upon blend compatibility. Blend compatibility was characterized by the occurence of a single glass transition intermediate between the transitions of the respective pure components. The glass transitions were determined by differential scanning calorimetry (DSC) and dynamic mechanical measurement (Rheovibron). It was found that SAN and PCL form compatible blends when the AN content of SAN ranges from 8% to 28% by weight. These blends are compatible in all proportions except for SAN 28 (AN wt % = 28) and PCL blends containing 70 or 85 wt % PCL. Blends of PCL and SAN were found to be incompatible when the AN content in SAN is greater than 30 wt % or less than 6 wt %. Lower critical solution temperature (LCST) behavior, which can be attributed to phase separation, was found to occur when these blends were heated to elevated temperatures. The cloud point, or phase separation, was found to vary with AN content in SAN and the concentration of SAN in the blend.     

Morphology and physical properties of SAN/NBR blends: The effect of AN content in NBR

Poly(styrene‐co‐acrylonitrile) (SAN), of which the content of acrylonitrile (AN) repeating unit is 32 wt % (SAN32), was blended with poly(butadiene‐co‐acrylonitrile) (NBR). The effects of AN repeating unit content in NBR on the miscibility, morphology, and physical properties of SAN32/NBR (70/30 by weight) blends were studied. Differential scanning calorimetry and the morphology observed by transmission electron microscopy showed that the miscibility between SAN32 and NBR was increased as the AN content in NBR was increased up to 50 wt %. The impact strength and some other mechanical properties of the blends had the maximum value when the AN content in NBR was 34 wt %. In the measurement of viscoelasticity at melt state, SAN32/NBR blends showed yield behavior at low shear rate, and this behavior was most evident when the AN content in NBR was 34 wt %. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 1861–1868, 2000     

The study of morphology,thermal and thermo‐mechanical properties of compatibilized TPU/SAN blends

The compatibilizing efficiency of three different compatibilizers in thermoplastic polyurethane/styrene‐co‐acrylonitrile (TPU/SAN) blends was investigated after their incorporation via melt‐mixing. The compatibilizers studied were poly‐ε‐caprolactone (PCL), a mixture of polystyrene‐block‐polycaprolactone (PS‐b‐PCL) and polystyrene‐block‐poly(methyl methacrylate) (PS‐b‐PMMA), and a mixture of polyisoprene‐block‐polycaprolactone (PI‐b‐PCL) and polybutadiene‐block‐poly(methyl methacrylate) (PB‐b‐PMMA). All compatibilizers were synthesized by living anionic polymerization. Investigations of thermal and thermo‐mechanical properties performed by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DTMA), respectively, were systematically classified into two groups, i.e. blends of TPU or SAN with 20 wt% of different compatibilizers (so‐called limit conditions) and TPU/SAN 25/75 blends with 5 wt% of different compatibilizers. In order to determine the compatibilizer's location, morphology of TPU/SAN 25/75 blends was studied with transmission electron microscopy (TEM). Different compatibilization activity was found for different systems. Blends compatibilized with PCL showed superior properties over the other blends. Polym. Eng. Sci. 44:838–852, 2004. © 2004 Society of Plastics Engineers.     

Viscoelastic properties of blends of poly(methyl methacrylate) and poly(styrene‐co‐acrylonitrile) having various acrylonitrile contents

Dynamic viscoelastic properties of blends of poly(methyl methacrylate) (PMMA) and poly(styrene‐co‐acrylonitrile) (SAN) with various AN contents were measured to evaluate the influence of SAN composition, consequently χ parameter, upon the melt rheology. PMMA/SAN blends were miscible and exhibited a terminal flow region characterized by Newtonian flow, when the acrylonitrile (AN) content of SAN ranges from 10 to 27 wt %. Whereas, PMMA/SAN blends were immiscible and exhibited a long time relaxation, when the AN content in SAN is less than several wt % or greater than 30 wt %. Correspondingly, melt rheology of the blends was characterized by the plots of storage modulus G′ against loss modulus G″. Log G′ versus log G″ plots exhibited a straight line of slope 2 for the miscible blends, but did not show a straight line for the immiscible blends because of their long time relaxation mechanism. The plateau modulus, determined as the storage modulus G′ in the plateau zone at the frequency where tan δ is at maximum, varied linearly with the AN content of SAN irrespective of blend miscibility. This result indicates that the additivity rule holds well for the entanglement molecular weights in miscible PMMA/SAN blends. However, the entanglement molecular weights in immiscible blends should have “apparent” values, because the above method to determine the plateau modulus is not applicable for the immiscible blends. Effect of χ parameter on the plateau modulus of the miscible blends could not be found. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis of poly[(2‐oxo‐1,3‐dioxolan‐4‐yl)methyl vinyl ether‐co‐N‐phenylmaleimide] and its miscibility in blends with styrene‐acrylonitrile or poly(vinyl chloride)

The aim of the study was to investigate the synthesis of a copolymer bearing cyclic carbonate and its miscibility with styrene/acrylonitrile copolymer (SAN) or poly(vinyl chloride) (PVC). (2‐Oxo‐1,3‐dioxolan‐4‐yl)methyl vinyl ether (OVE) as a monomer was synthesized from glycidyl vinyl ether and CO₂ using quaternary ammonium chloride salts as catalysts. The highest reaction rate was observed when tetraoctylammonium chloride (TOAC) was used as a catalyst. Even at the atmospheric pressure of CO₂, the yield of OVE using TOAC was above 80% after 6 h of reaction at 80°C. The copolymer of OVE and N‐phenylmaleimide (NPM) was prepared by radical copolymerization and was characterized by FTIR and ¹H‐NMR spectroscopies and differential scanning calorimetry (DSC). The monomer reactivity ratios were given as r₁ (OVE) = 0.53–0.57 and r₂ (NPM) = 2.23–2.24 in the copolymerization of OVE and NPM. The films of poly(OVE‐co‐NPM)/SAN and poly(OVE‐co‐NPM)/PVC blends were cast from N‐dimethylformamide. An optical clarity test and DSC analysis showed that poly(OVE‐co‐NPM)/SAN and poly(OVE‐co‐NPM)/PVC blends were both miscible over the whole composition range. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1809–1815, 2000     

Effects of tetramethylpolycarbonate‐block‐poly(styrene‐co‐acrylonitrile) copolymers containing various amounts of acrylonitrile on the interfacial properties of polycarbonate and poly(styrene‐co‐acrylonitrile) blends

Tetramethylpolycarbonate‐block‐poly(styrene‐co‐acrylonitrile) (TMPC‐block‐SAN) block copolymers containing various amounts of acrylonitrile (AN) were examined as compatibilizers for blends of polycarbonate (PC) with poly(styrene‐co‐acrylonitrile) (SAN) copolymers. To explore the effects of block copolymers on the compatibility of PC/SAN blends, the average diameter of the dispersed particles in the blend was measured with an image analyzer, and the interfacial properties of the blends were analyzed with an imbedded fibre retraction technique and an asymmetric double‐cantilever beam fracture test. Reduction in the average diameter of dispersed particles and effective improvement in the interfacial properties was observed by adding TMPC‐block‐SAN copolymers as compatibilizer of PC/SAN blend. TMPC‐block‐SAN copolymer was effective as a compatibilizer when the difference in the AN content of SAN copolymer and that of SAN block in TMPC‐block‐SAN copolymer was less than about 10 wt%. Copyright © 2004 Society of Chemical Industry     

Melting point depression in poly(ɛ-caprolactone) / poly(styrene-co-acrylonitrile) blends

Summary The melting point depression of poly(-caprolactone)/poly(styrene-co-acrylonitrile) (PCL/SAN) blends with changes in acrylonitrile content of SAN and in blend ratio was investigated by differential scanning calorimetry. For the melting points at a constant blend ratio occur a minimum in dependence on the copolymer composition for blends containing about 20 wt% acrylonitrile in SAN. From melting point depression data a negative, binary interaction parameter was obtained for PCL/SAN blends containing a SAN with 19.2 wt% AN. By optical microscopy it can be shown that the shape of the spherulites changes with copolymer composition of SAN and blend ratio.     

Effect of miscibility on migration of third component in star‐like co‐continuous and disperse‐within‐disperse mixed brushes

Novel ternary mixed‐brush single crystals were designed with disperse‐within‐disperse and star‐like co‐continuous morphologies based on poly(ethylene glycol) (PEG)‐b‐polystyrene (PS)/PEG‐b‐poly(methyl methacrylate) (PMMA)/PEG‐b‐polyaniline (PANI) and PEG‐b‐PS/PEG‐b‐PMMA/PEG‐b‐(poly(?‐caprolactone) (PCL) or poly(l ‐lactide) (PLLA)) block copolymers, respectively. In the disperse‐within‐disperse ternary mixed brushes, PANI nanorods were dispersed within the matrix (PS)–dispersed (PMMA) amorphous brushes. The flexibility and rigidity of brushes mainly affected the ultimate morphology and arrangement of amorphous coiled brushes in the vicinity of PANI nanorods. In addition, the migration of PCL and PLLA crystallizable brushes was evident into PMMA phases dispersed in the PS matrix, leading to star‐like co‐continuous patterns of PCL and PLLA brushes. This phenomenon was related to the miscibility of crystallizable PCL and PLLA brushes with the PMMA phase. The migration of crystallizable PCL and PLLA brushes increased the size of PMMA domains in the star‐like co‐continuous patterns. Despite the larger osmotic pressure of PLLA brushes, their higher miscibility with PMMA chains reflected the greater PMMA dispersal and wider PLLA star‐like branches. © 2017 Society of Chemical Industry     

Phase equilibrium in the binary and ternary blend system: Polycaprolactone-polyvinyl chloride-styrene acrylonitrile copolymer

An experimental study of binary and ternary phase equilibrium in the system polycaprolactone (PCL) poly(vi-nylchloride) (PVC)-77/23 styrene-acrylonitrile copolymer (SAN) is described. Miscibility is determined using differential scanning calorimetry (DSC) and turbidity. PCL/PVC and PCL/SAN are largely miscible systems but PVC/SAN is immiscible. The ternary system shows considerable miscibility. The blends are characterized by polarized light microscopy and wide-angle X-ray diffraction. The former measurement characterizes the structure of the spherulites. Additions of PVC, SAN, or PVC/SAN causes the spherulites observed in PCL to grow in size and become coarse. X-ray diffraction shows no movement of crystallographic peaks indicating the crystallographic unit cell is composed of PCL. Melting point depression measurements are used to calculate Flory χ interaction parameters for PCL/PVC and PCL/SAN. The melting point depression is also considered and used to investigate PVC/SAN interaction. An effort is made to compute the ternary phase diagram and tie lines.     

Blends of imidized acrylic polymers with SAN copolymers and with PVC

A series of imidized acrylic polymers of varying structural composition generated by reaction of methylamine with poly(methyl methacrylate) were blended with a range of styrene/acrylonitrile or SAN copolymers (0–33% AN) and with poly(vinyl chloride). On the basis of glass transition behavior determined by differential scanning calorimetry, some but not all imidized acrylic structures were found to be miscible with PVC and with SAN copolymers within a limited window of AN levels. Acid functionality in the imidized acrylics appears to hinder their miscibility with SAN rather significantly and with PVC to a lesser extent. Miscible SAN blends showed lower critical solution temperature behavior whereas miscible blends with PVC did not up to the highest attainable temperatures. The composition factors that influence the phase behavior are described and interpreted in terms of possible mechanisms.     

Miscibility and rheological properties of poly(vinyl chloride)/styrene–acrylonitrile blends prepared by melt extrusion

Styrene–acrylonitrile (SAN) with acrylonitrile (AN) concentrations of 11.6–26 wt % and α‐methylstyrene acrylonitrile (αMSAN) with a wide range of AN concentrations are miscible with poly(vinyl chloride) (PVC) through solution blending. Here we examine the rheological properties and miscibility of PVC/SAN and PVC/αMSAN blends prepared by melt extrusion for commercial applications. We have investigated the rheological properties of the blends with a rheometer and a melt indexer. The PVC/SAN and PVC/αMSAN blends have a low melting torque, a long degradation time, and a high melt index, and this means that they have better processability than pure PVC. The miscibility of the blends has been characterized with differential scanning calorimetry, dynamic mechanical thermal analysis, and advanced rheometrics expansion system analysis. The miscibility of the blends has also been characterized with scanning electron microscopy. The SAN series with AN concentrations of 24–31 wt % is immiscible with PVC by melt extrusion, whereas αMSAN with 31 wt % AN is miscible with PVC, even when they are blended by melt extrusion, because of the strong interaction between PVC and αMSAN. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Effect of the composition of α-MSAN copolymer on the miscibility of PVC/α-MSAN blends

A series of α-methylstyrene, styrene, and acrylonitrile (α-MSAN) copolymers with different acrylonitrile (AN) contents were synthesized by altering α-MSt, St, and AN ratios with emulsion copolymerization method. By melt-blending these copolymers with PVC resin and di-isooctyl phthalate (DOP), PVC/α-MSAN, and PVC/α-MSAN/DOP blends were prepared. The miscibility and morphology of the blends were investigated by dynamic mechanical analysis (DMA) and scanning electron microscopy. The PVC is immiscible with SAN by melt-mixing, whereas PVC is miscible with α-MSAN (α-MSt/St = 1/1) if AN weight percent is within the window range of 20–25 wt %, and α-MSAN (not containing St) with 35 wt % AN is miscible with PVC even when they are blended by melt-mixing. Replacement of styrene with α-methylstyrene widens the miscibility window with PVC. The miscibility of PVC/α-MSAN blends is substantially improved with the increasing α-MSt content in α-MSAN copolymer containing identical AN content. When DOP was introduced into the PVC/α-MSAN (α-MSt/St = 1/1) blends, a single tan δ peak over room temperature in DMA detection is found as AN content in α-MSAN copolymer is within the range of 15–25 wt %, and SEM observation also shows that the blends are homogeneous. When the AN content in α-MSAN copolymer is over 35 wt %, the presence of DOP causes the phase domain extended. The phase domain size of the PVC/α-MSAN/DOP blends intensively depends on AN content in α-MSAN copolymer. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Molecular simulation of miscibility of poly(2,6‐dimethyl‐1,4‐phenylene ether)/poly(styrene‐co‐acrylonitrile) blend with the compatibilizer triblock terpolymer SBM

Polymer blend of poly(2,6‐dimethyl‐1,4‐phenylene ether) (PPE) and poly(styrene‐co‐acrylonitrile) (SAN), which has broad commercial interest, has limited miscibility. A triblock terpolymer, polystyrene‐block‐polybutadiene‐block‐poly(methyl methacrylate) (SBM), is often used as compatibilizer to improve the miscibility of PPE/SAN. In this work, dissipative particle dynamics and molecular dynamics of Material Studio were used to study the essentials that influence miscibility of the blend systems, and then Flory–Huggins parameter χ, radial distribution function (RDF) and morphologies are analyzed. It shows that the blends with more content of styrene in SAN (above 90 wt%), whose mass percentage is 60%, are best miscible. For the systems of PPE/SAN added with SBM, the miscibility increases and then decreases with the increase of SBM content. A longer chain of styrene (S) in SBM leads to wrapped structure of PMMA by PB, wrapped by PS, resulting in decrease of the miscibility. From studies and simulation of χ and RDF, the best blend system for commercial and industrial use is the one with mass ratio of PPE/SAN/SBM 36/54/10, in which S content in SAN is above 90 wt%. For SBM, the ratio of chain length styrene (S)/butadiene (B) is lessthan 1, while B and M are the same in chain length. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Miscibility and transesterification in ternary blends of poly(ethylene naphthalate)/poly(pentamethylene terephthalate)/poly(ether imide)

Miscibility and morphology of poly(ethylene 2,6‐naphthalate)/poly(pentamethylene terephthalate)/poly(ether imide) (PEN/PPT/PEI) blends were studied by differential scanning calorimetry (DSC), optical microscopy (OM), proton nuclear magnetic resonance imaging (¹H‐NMR), and wide‐angle X‐ray diffraction (WAXD). OM and DSC results from ternary blends revealed the immiscibility of PEN/PPT/PEI blends, but ternary blends of all compositions were phase‐homogeneous following heat treatment at 300°C for over 60 min. Annealing samples at 300°C yielded an amorphous blend with a clear and single T_g at the final state. Experimental data from ¹H‐NMR revealed that PEN/PPT copolymers (ENPT) were formed by the so‐called transesterification. The effect of transesterification on glass transition and crystallization was discussed in detail. The sequence structures of the copolyester were identified by triad analysis, which showed that the mean sequence lengths became shorter and the randomness increased with heating time. The results reveal that a random copolymer improved the miscibility of the ternary blends, in which, the length of the homo segments in the polymer chain decreased and the crystal formation was disturbed because of the irregularity of the structure, as the exchange reaction proceeded. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3840–3849, 2006     

Effects of the polybutadiene/poly(styrene‐co‐acrylonitrile) ratio in a polybutadiene‐g‐poly(styrene‐co‐acrylonitrile) impact modifier on the morphology and mechanical behavior of acrylonitrile–butadiene–styrene blends

Polybutadiene‐g‐poly(styrene‐co‐acrylonitrile) (PB‐g‐SAN) impact modifiers with different polybutadiene (PB)/poly(styrene‐co‐acrylonitrile) (SAN) ratios ranging from 20.5/79.5 to 82.7/17.3 were synthesized by seeded emulsion polymerization. Acrylonitrile–butadiene–styrene (ABS) blends with a constant rubber concentration of 15 wt % were prepared by the blending of these PB‐g‐SAN copolymers and SAN resin. The influence of the PB/SAN ratio in the PB‐g‐SAN impact modifier on the mechanical behavior and phase morphology of ABS blends was investigated. The mechanical tests showed that the impact strength and yield strength of the ABS blends had their maximum values as the PB/SAN ratio in the PB‐g‐SAN copolymer increased. A dynamic mechanical analysis of the ABS blends showed that the glass‐transition temperature of the rubbery phase shifted to a lower temperature, the maximum loss peak height of the rubbery phase increased and then decreased, and the storage modulus of the ABS blends increased with an increase in the PB/SAN ratio in the PB‐g‐SAN impact modifier. The morphological results of the ABS blends showed that the dispersion of rubber particle in the matrix and its internal structure were influenced by the PB/SAN ratio in the PB‐g‐SAN impact modifiers. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2165–2171, 2005     

Miscibility,UV resistance,thermal degradation,and mechanical properties of PMMA/SAN blends and their composites with MWCNTs

Poly(methyl methacrylate)/poly(styrene‐co‐acrylonitrile) (PMMA/SAN) blends, with varying concentrations, were prepared by melt‐mixing technique. The miscibility is ensured by fixing the acrylonitrile (AN) content of styrene acrylonitrile (SAN) as 25% by weight. The blends were transparent as well. The Fourier transform infrared spectroscopic (FTIR) studies did not reveal any specific interactions, supporting the well accepted ‘copolymer repulsion effect’ as the driving mechanism for miscibility. Addition of SAN increased the stability of PMMA towards ultraviolet (UV) radiations and thermal degradation. Incorporation of even 0.05% by weight of multi‐walled carbon nanotubes (MWCNTs) significantly improved the UV absorbance and thermal stability. Moreover, the composites exhibited good strength and modulus. However, at higher concentrations of MWCNTs (0.5 and 1% by weight) the thermo‐mechanical properties experienced deterioration, mainly due to the agglomeration of MWCNTs. It was observed that composites with 0.05% by weight of finely dispersed and well distributed MWCNTs provided excellent protection in most extreme climatic conditions. Thus, PMMA/SAN/MWCNTs composites can act as excellent light screens and may be useful, as cost‐effective UV absorbers, in the outdoor applications. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43628.