Synthesis and characterization of α‐amino acid‐containing polyester: poly[(ε‐caprolactone)‐co‐(serine lactone)]

Novel polyesters, poly[(ε‐caprolactone)‐co‐(N‐trityl‐L ‐serine‐β‐lactone)]s, were prepared by copolymerizing ε‐caprolactone (CL) with N‐trityl‐L ‐serine‐β‐lactone (TSL) using ZnEt₂ as the catalyst. The number‐average molecular weights were determined which ranged from 2.7 × 10⁴ to 4.9 × 10⁴ Da with dispersity values ranging from 1.6 to 1.8. The structures of the copolymers were investigated by means of ¹H NMR, ¹³C NMR and infrared spectroscopies, thermogravimetric analysis and differential scanning calorimetry. The results indicated that CL and TSL monomer units were randomly distributed within the copolymer backbone structures and the ratios of TSL to CL in the copolymers were close to those in the feeds. After removal of the trityl group under mild condition, a new polyester with side amino groups provided by serine units was obtained. L929 cell culturing test indicated good biocompatibility of the polyester with or without protective groups. © 2012 Society of Chemical Industry     

α‐Amino acids as initiators of ε‐caprolactone and L,L‐lactide polymerization

Biodegradable polymers/oligomers were successfully synthesized through a ring‐opening polymerization of ε‐caprolactone and L ,L ‐lactide, initiated by L ‐arginine and L ‐citrulline. The α‐amino acid initiators are natural, operationally simple, inexpensive, environmentally friendly and safe for human health. The polymerizations were performed with no solvents and without introducing any metal impurities. The chemical structures of the polymers obtained were elucidated using ¹H NMR, ¹³C NMR and Fourier transform infrared spectroscopies. In addition, incorporation of α‐amino acid molecules into the polymer chain was confirmed using matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry. Due to the significant biological activity of L ‐arginine and L ‐citrulline, these α‐amino acid initiators may open a new route for the synthesis of functional polymers especially for pharmaceutical applications. Copyright © 2011 Society of Chemical Industry     

Polymerization of cyclic monomers. VII. Synthesis and radical polymerization of 1,3‐bis[(1‐alkoxycarbonyl‐2‐vinylcyclopropane‐1‐yl)carboxy]benzenes

1,3‐Bis[(1‐alkoxycarbonyl‐2‐vinylcyclopropane‐1‐yl)carboxy]benzenes 1 [RO: CH₃O (a), C₂H₅O (b)] were synthesized by the esterification of the corresponding 1‐alkoxycarbonyl‐2‐vinylcyclopropane‐1‐carboxylic acids with resorcinol. The structure of the new vinylcyclopropanes was confirmed by elemental analysis and infrared (IR), ¹H nuclear magnetic resonance (¹H‐NMR), and ¹³C nuclear magnetic resonance (¹³C‐NMR) spectroscopy. The radical polymerization of difunctional 2‐vinyl‐cyclopropanes in bulk with 2,2′‐azoisobutyronitrile (AIBN) results in hard, transparent, crosslinked polymers. During the bulk polymerization of the crystalline bis[(1‐methoxycarbonyl‐2‐vinylcyclopropane‐1‐yl)carboxy]benzene 1a, an expansion in volume of about 1% took place. The radical solution polymerization of 1a resulted in a soluble polymer with pendant 2‐vinylcyclopropane groups. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1775–1782, 1999     

Synthesis of PLLA‐PEOMA comb‐block‐comb type molecular brushes based on AGET ATRP and ring‐opening polymerization

BACKGROUND: Molecular brushes are types of macromolecules with densely grafted side chains on a linear backbone. The synthesis of macromolecular brushes has stimulated much interest due to their great potential in applications in various fields. Poly(L ‐lactide)–poly(ethylene glycol) methyl ether methacrylate (PLLA‐PEOMA) comb‐block‐comb molecular brushes with controlled molecular weights and narrow molecular weight distributions were successfully synthesized based on a combination of activator generated by electron transfer (AGET) atom transfer radical polymerization (ATRP) and ring‐opening polymerization. The synthetic route is a combination of the ‘grafting through’ method for AGET ATRP of the PEOMA comb block and the ‘grafting from’ method for the synthesis of the PLLA comb block. Poly(2‐hydroxyethyl methacrylate) (PHEMA) was synthesized by ATRP, and PLLA side chains and PEOMA side chains were grown from the backbones and the terminal sites of PHEMA, respectively. RESULTS: The number‐average degrees of polymerization of PLLA chains and poly[poly(ethylene glycol) methyl ether methacrylate] (PPEOMA) comb blocks were determined using ¹H NMR spectroscopy, and the apparent molecular weights and molecular weight distributions of the brush molecules were measured using gel permeation chromatography. The crystallization of the components in the comb‐block‐comb copolymers was also investigated. The crystallization of PLLA side chains is influenced by PLLA chain length and the content of PPEOMA in the molecular brushes. The comb‐block‐comb copolymer composed of hydrophobic PLLA and hydrophilic PEOMA can self‐assemble into a micellar structure in aqueous solution. CONCLUSION: A combination of AGET ATRP and ring‐opening polymerization is an efficient method to prepare well‐defined comb‐block‐comb molecular brushes. The physical properties of the molecular brushes are closely related to their structures. Copyright © 2009 Society of Chemical Industry     

Structure and morphology of poly(β‐hydroxybutyrate) synthesized by ring‐opening polymerization of racemic (R,S)‐β‐butyrolactone with distannoxane derivatives

Predominantly syndiotactic poly((R,S)‐β‐hydroxybutyrate) (PHB) was synthesized by ring‐opening polymerization of racemic β‐butyrolactone with distannoxane derivatives as catalysts. We have studied the polymerization of (R,S)‐β‐BL using distannoxane derivatives as catalysts and the effects of polymerization time on crude yield and molecular weight of the polymers obtained. Then, a more detailed study of the characterization of polymers obtained using hydroxy‐ and ethoxy‐distannoxanes was performed. ¹³C NMR spectroscopy resolved stereosequences in synthetic PHB at the diad level for the carbonyl carbon and at the triad level for the methylene carbon. These analyses show that distannoxane catalysts produce preferentially syndiotactic polyesters (syndiotactic diads fraction from 0.56 to 0.61). Triad stereosequence distribution of PHB samples agrees favourably with the Bernoullian statistical model of chain‐end control, where ideally Φ = 4(mm) (rr)/(mr + rm)² = 1 for perfect chain‐end control. Polymer samples synthesized from distannoxane catalysts are composed of two distinct transition endotherm components with peak temperatures of approximately 42 °C and 75 °C. The formation of two melting endotherms may be due to the presence of two different crystalline structures. © 2000 Society of Chemical Industry     

Continuous polymerization of lactam–lactone block copolymers in a twin‐screw extruder

Continuous copolymerizations of ?‐caprolactone with ?‐caprolactam and ω‐lauryl lactam were carried out in a modular intermeshing corotating twin‐screw extruder. Sodium hydride (initiator) and N‐acetyl caprolactam (coinitiator) were used to synthesize lactam–lactone copolymers in a twin‐screw extruder. We consider the variables of feeding order and feed rate of comonomers on the reactive extrusion of lactam–lactone copolymers. It was observed that simultaneous feeding of both monomers with initiator and coinitiator in the first hopper produced a mixture of homopolymers. When we fed the lactam into the first hopper and caprolactone sequentially into the second hopper, we obtained the lactam–caprolactone block copolymers. However, when we fed caprolactone first into the first hopper and the lactam into the second hopper, the extruded product was a mixture of poly(?‐caprolactone) and lactam monomer. We synthesized high molecular weight copolymers of poly(caprolactam‐b‐caprolactone) and poly(lauryl lactam‐b‐caprolactone) with different block lengths by sequential feeding of monomers. The block length of the block copolymer could be adjusted by controlling the feed rate of each monomer during reactive extrusion. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1429–1437, 2003     

Ring‐opening polymerization of ε‐caprolactone with a divalent samarium bis(phosphido) complex

The ring‐opening polymerization of ε‐caprolactone initiated with a divalent samarium bis(phosphido) complex [Sm(PPh₂)₂] is reported. The polymerization proceeded under mild reaction conditions and resulted in polyesters with number‐average molecular weights of 8.2 × 10³ to 12.5 × 10³. The yield and molecular weight of poly(ε‐caprolactone)s were dependent on the experimental parameters, such as the monomer/initiator molar ratio, the monomer concentration, the reaction temperature, and the polymerization time. The obtained polymers were characterized with Fourier transform infrared, NMR, gel permeation chromatography, and differential scanning calorimetry. On the basis of an end‐group analysis of low‐molecular‐weight polymers by NMR spectroscopy, a coordination–insertion mechanism is proposed for the polymerization. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1558–1564, 2005     

Tetrahydrosalen‐stabilized,chloride‐containing rare‐earth complexes: Facile initiator precursors for the preparation of hydroxytelechelic poly(ε‐caprolactone)s

End‐capped poly(ε‐caprolactone)s (PCLs) have been prepared elsewhere by various initiators. However, hydroxytelechelic PCLs have been reported less frequently, although there are two hydroxyl end groups in one polymer chain, which allows diversified functionalization. Two tetrahydrosalen‐backboned chlorides containing rare‐earth complexes, YbLCl(DME)₂ and ErLCl(DME) {where L is 6,6′‐[ethane‐1,2‐diylbis(methylazanediyl)]bis (methylene)bis(2,4‐di‐tert‐butylphenol) and DME is dimethoxyethane}, were first synthesized in this study, and they were used as initiator precursors for a ring‐opening polymerization in the presence of NaBH₄ to afford hydroxytelechelic PCLs. The polymerization under different conditions was investigated, and a possible mechanism is proposed. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Polyethylene‐block‐poly(ε‐caprolactone) diblock copolymers: synthesis and compatibility

A strategy is introduced for the synthesis of polyethylene‐block‐poly(ε‐caprolactone) block copolymers by a combination of coordination polymerization and ring‐opening polymerization. First, end‐hydroxylated polyethylene (PE‐OH) was prepared with a one‐step process through ethylene/3‐buten‐1‐ol copolymerization catalyzed by a vanadium(III) complex bearing a bidentate [N,O] ligand ([PhN?C(CH₃)CHC(Ph)O]VCl₂(THF)₂). The PE‐OH was then used as macroinitiator for ring‐opening polymerization of ε‐caprolactone, leading to the desired nonpolar/polar diblock copolymers. The block structure was confirmed by spectral analysis using ¹H NMR, gel permeation chromatography and differential scanning calorimetry. The unusual topologies of the model copolymers will establish a fundamental understanding for structure–property correlations, e.g. compatibilization, of polymer blends and surface and interface modification of other polymers. © 2014 Society of Chemical Industry     

A new macroinitiator for the synthesis of triblock copolymers PA12‐b‐PDMS‐b‐PA12

A new PDMS macroinitiator is proposed for the anionic ring‐opening polymerization of lactams. This α,ω‐dicarbamoyloxy caprolactam PDMS macroinitiator was readily obtained in quantitative yield, by an original synthesis scheme in two steps, which involved the scarcely reported reaction of isocyanates with silanol groups. It was then shown that this bifunctional macroinitiator enabled to synthesize triblock copolymers PA12‐b‐PDMS‐b‐PA12 by polymerization of lauryl lactam (LL) at high temperature (200°C) in inert atmosphere under conditions compatible with reactive extrusion processes. Another related high molar weight α,ω‐diacyllactam PDMS macroinitiator was also successfully used in the polymerization of LL under the same conditions, therefore overcoming the limitations formerly reported for this type of macroinitiators during the polymerization ε‐caprolactam (ε‐CL) at a much lower temperature (80°C). Triblock copolymers with a wide range of PA12 /molar weights (M_n: ～ 10,800–250,000 Da) were eventually obtained by using both types of macroinitiators. DMTA and DSC analyses showed that their thermal properties were strongly dependent upon their respective contents in soft and hard blocks. Such triblock copolymers already appear very promising for the highly effective in situ compatibilization of PA12/PDMS blends as shown by recent complementary results obtained in our laboratory. © 2006 Wiley Periodicals, Inc. J Appl PolymSci 102: 2818–2831, 2006     

One step synthesis and rapid ring‐opening polymerization of macrocyclic (arylene thioether ketone) oligomers

Well‐crystal macrocyclic (arylene thioether ketone) oligomers were synthesized under high dilution condition by the reaction of Na₂S with bis(4‐fluoro‐phenyl)‐methanone in 1‐methyl‐pyrrolidone (NMP). The oligomers were fully characterized by Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectra (MALDI‐TOF‐MS), high‐pressure liquid chromatography (HPLC), gel permeation chromatography (GPC), ¹H NMR, ¹³C‐NMR, and differential scanning calorimetry (DSC). According to DSC studies, uncatalyzed and rapid ring‐opening polymerization (ROP) of the oligomers took place instantly when they were heated to melting point. Extracted by dichloro‐methane, the obtained polymer neither loses any weight nor dissolves in boiling 1‐chloro‐ naphthalene. These facts indicated that there are no residual oligomers within the resultant polymer. The as‐prepared oligomers could be potentially used as high‐temperature hot‐melt adhesive at a high temperature > 350°C, and matrices for high‐performance composites and nanocomposites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 161–166, 2006     

New crosslinked polymer from a rapid polymerization of acrylic acid with triaziridine‐containing compound

A triaziridine containing compound, trimethylolpropane tris(1‐aziridinepropionate) (TMPTA‐AZ), is prepared from a Michael addition of aziridine (AZ) with trimethylolpropane triacrylate (TMPTA). A rapid polymerization of acrylic acid (AA) with TMPTA‐AZ occurred at ambient temperature without catalyst. This polymerization process involves three subsequent reactions are proposed: (1) An exothermic neutralization takes place between AA and TMPTA‐AZ. (2) That neutralization heat triggers AZ ring‐opening reaction and that carboxyl group (of AA) plays as a nucleophile and results in an amino ester bond formation. (3) A final crosslinked polymer is obtained from that amino group reacts with its acrylic double bond via an intermolecular Michael addition reaction. These new crosslinked polymers with various performance properties are obtained from a mixture of AA and TMPTA‐AZ in different ratios and post‐heating. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 809–815, 2007     

Surface‐initiated ring‐opening polymerization of ϵ‐caprolactone from the surface of PP film

This article presents the ring‐opening polymerization of ε‐caprolactone (ε‐CL) from PP film modified with an initiator layer composed of ? OSn(Oct) groups. This method consists of two steps: (1) Sn(Oct)₂ exchanged with the hydroxyl groups on the surface of PP film, forming the ? OSn(Oct) groups bonded on the surface; (2) surface‐initiated ring‐opening polymerization of ε‐CL with the ? OSn(Oct) groups. The initiator layer is characterized by attenuated total reflectance‐Fourier transform infrared (ATR‐FTIR), contact angles, and X‐ray photoelectron spectroscopy (XPS). The growth of PCL chains from the initiator layer through ring‐opening polymerization is successfully achieved. ATR‐FTIR, XPS, and scanning electron microscope (SEM) are also used to characterize the grafted film. XPS results reveal that the PCL chains cover the surface of PP film after 4 h. The SEM images reveal that the PCL chain clusters grow into regular spheroidal particles, which can be changed into other different morphology by treated with different solvents. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

The effects of solvent and initiator on anionic ring opening polymerization of ϵ‐caprolactone: synthesis and characterization

Anionic ring opening polymerization of ?‐caprolactone was studied by using different amounts of two potassium activated initiators containing ethylene glycol (EG) and polyhedral oligomeric silsesquioxane (POSS) diol, in tetrahydrofuran and toluene as solvents. The synthesized hydroxyl terminated macromers and linear poly(?‐caprolactone) (PCL) were characterized by proton and carbon nuclear magnetic resonance and gel permeation chromatography (GPC) techniques. Results showed an increase in molecular weight as the monomer/initiator molar ratio increased from 100 to 151 and 202, while the molecular weight distribution (MWD) showed a minimum by monomer concentration increase. Moreover, POSS‐diol‐initiated PCLs showed a higher MWD than the polymers initiated with the EG initiator. This was attributed to the formation of a vesicular structure of POSS diols which was confirmed by optical microscopy. By deconvolution of GPC peaks, the best conditions to synthesize PCL with the narrowest MWD were selected. Finally, the effects of some other parameters were studied in more detail.     

Curing behaviors and thermal properties of benzoxazine and N,N′‐(2, 2, 4‐trimethylhexane‐1, 6‐diyl) dimaleimide blend

A blend of bisphenol‐A based benzoxazine (BA‐a)/N, N′‐(2, 2, 4‐Trimethylhexane‐1, 6‐diyl) dimaleimide (TBMI) with the ratio of 1:1 was prepared and its curing behaviors were studied by differential scanning calorimetry (DSC), Fourier Transform Infrared (FTIR). The curing mechanism was proposed based on the semiquantitative analysis from FTIR spectra. The model compound was used to study the catalysis effect of BA‐a on the curing reaction of TBMI. It was found the curing reactions of BA‐a and TBMI not only proceeded simultaneously, but their coreactions also occurred. The research further indicated that negative oxygen ions from ring opening of benzoxazine mainly promoted the polymerization of maleimide groups, even though the amine group of benzoxazine had a positive effect on the reaction of maleimide groups. Besides, BA‐a and TBMI blends showed improved thermal properties based on the results from DMA and TGA. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Zinc‐based catalyst for the ring‐opening polymerization of cyclic esters

A zinc‐based catalyst zinc bis[bis(trimethylsilyl)amide] was used for the polymerization of cyclic esters including L ‐lactide (L ‐LA) and 2‐methyl‐2‐carboxyl‐propylene carbonate (MBC). The polymerization of L ‐lactide in THF could be carried out successfully under mild conditions in very short time by using the zinc catalyst and alcohols as the initiators. Kinetic study in solution polymerization prooved the polymerization has high monomer conversion degree close to 100% and the molecular weight of the resulting polyester has linear increase with the increase of [M]₀ /[I] (molar ratio of monomer to initiator). Sequential polymerization of L ‐LA and MBC in THF also showed high MBC conversion of 94% with a narrow molecualr weight maintained, indicating a living nature of this polymerization. The zinc catalyst system has also been used for the L ‐LA bulk polymerization with a high monomer conversion. ¹³C NMR indicated the polymer possesses high regioregularity and the minor regioirregular component was owing to the D ‐LA in the monomer inserted into the polymer mainchain during the transesterifcation. Interaction between monomer and zinc catalyst has been found to be a key factor to sustain a homogenous solution during the initiating procedure. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis,cationic polymerization and curing reaction with epoxy resin of 3,9‐di(p‐methoxybenzyl)‐1,5,7,11‐tetra‐oxaspiro(5,5)undecane

A new spiro ortho carbonate, 3,9‐di(p‐methoxybenzyl)‐1,5,7,11‐tetra‐oxaspiro(5,5)undecane was prepared by the reaction of 2‐methoxybenzyl‐1,3‐propanediol with di(n‐butyl)tin oxide, following with carbon disulfide. Its cationic polymerization was carried out in dichloromethane using BF₃‐OEt₂ as catalyst. The [¹H], [¹³C]NMR and IR data as well as elementary analysis of the polymers obtained indicated that it underwent double ring‐opening polymerization. The polymerization mechanism is discussed. The curing reaction of bisphenol A type epoxy resin in the presence of the monomer and a curing agent was investigated. DSC measurements were used to follow the curing process. In the case of boron trifluoride‐o‐phenylenediamine (BF₃‐OPDA) as curing agent, two peaks were found on the DSC curves, one of which was attributed to the polymerization of the epoxy group, and the other to the copolymerization of the monomer with the isolated epoxy groups or homopolymerization. However, when BF₃‐H₂NEt was used as curing agent, only one peak was present. IR measurement of the modified epoxy resin with various weight ratios of epoxy resin/monomer was performed in the presence of BF₃‐H₂NEt as curing agent. The results demonstrate that the conversion of epoxy group increases as the content of monomer increases. The curing process and the structure of the epoxy resin network are discussed. © 2000 Society of Chemical Industry     

Influence of the synthesis conditions on the structural and thermal properties of poly(l‐lactide)‐b‐poly(ethylene glycol)‐b‐poly(l‐lactide)

The poly(l ‐lactide)‐b‐poly(ethylene glycol)‐b‐poly(l ‐lactide) block copolymers (PLLA‐b‐PEG‐b‐PLLA) were synthesized in a toluene solution by the ring‐opening polymerization of 3,6‐dimethyl‐1,4‐dioxan‐2,5‐dione (LLA) with PEG as a macroinitiator or by transterification from the homopolymers [polylactide and PEG]. Two polymerization conditions were adopted: method A, which used an equimolar catalyst/initiator molar ratio (1–5 wt %), and method B, which used a catalyst content commonly reported in the literature (<0.05 wt %). Method A was more efficient in producing copolymers with a higher yield and monomer conversion, whereas method B resulted in a mixture of the copolymer and homopolymers. The copolymers achieved high molar masses and even presenting similar global compositions, the molar mass distribution and thermal properties depends on the polymerization method. For instance, the suppression of the PEG block crystallization was more noticeable for copolymer A. An experimental design was used to qualify the influence of the catalyst and homopolymer amounts on the transreactions. The catalyst concentration was shown to be the most important factor. Therefore, the effectiveness of method A to produce copolymers was partly due to the transreactions. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40419.     

Visible light‐induced polymerization of monooxiranes and 1,5,7,11‐tetraoxaspiro[5.5]undecanes

The visible‐light photohomopolymerization reactivities of several monofunctional oxiranes were evaluated using photodifferential scanning calorimetry (PDSC). Two oxiranes, styrene oxide and 1‐methoxy‐2‐methyl propylene oxide, were selected for copolymerization reactivity studies with five substituted 1,5,7,11‐ tetraoxaspiro[5.5]undecanes (TOSUs). Reaction mixtures contained a diaryliodonium salt photoacid initiator and a β‐diketone photosensitizer. Experimentally determined reaction enthalpies were compared with calculated theoretical values to assess percent conversion. Relative reactivities were evaluated by comparing induction and exotherm peak maximum times. Results of AM1 semiempirical quantum mechanical calculations of reaction energetics were compared to experimental findings for selected polymerizations. IR spectral changes were consistent with oxirane and TOSU ring opening. The effect of temperature on the photopolymerization reactivity characteristics of glycidyl methylphenyl ether alone and in combination with unsubstituted TOSU was also studied. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 159–168, 2002     

Fully degradable antibacterial poly(ester‐phosphoester)s by ring‐opening polymerization, “click” chemistry,and quaternization

Fully degradable cationic poly(ester‐phosphoester)s with antibacterial properties were prepared by a combination of ring‐opening polymerization (ROP) and “click” reaction. First, poly(ester‐phosphoester)s‐bearing alkynyl groups were synthesized by the ring‐opening copolymerization of 2‐(2‐propynyloxy)?2‐oxo‐1,3,2‐dioxaphospholane (propynyl ethylene phosphate, PEP) and ε‐caprolactone (CL) using lanthanum tris(2,6‐di‐tert‐butyl‐4‐methylphenolate)s (La(DBMP)₃) as the catalyst. 2‐Azido‐N,N‐dimethylethanamine (DMEAN₃) was then attached to the copolymers by “click” reaction, resulting in poly(ester‐phosphoester)s with pendant tertiary amines. After the quaternization reactions between the copolymer and various alkyl bromides, cationic poly(ester‐phosphoester)s containing ammonium groups were obtained. Optical density (OD) measurement shows that the cationic copolymers have excellent antibacterial activity, which makes them potential candidates as biomaterials. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42647.