Effects of rare earth on inclusions and corrosion resistance of 10PCuRE weathering steel

The types,morphologies and distributions of nonmetallic inclusions in Cu-P weathering steels with and without rare earth were analyzed through a quantitative image analyzer,scanning electron microscopy(SEM)and energy dispersive spectroscopy(EDS)attached to SEM.Solid-soluble content of rare earth in the steels was analyzed by non-aqua electroanalysis and ICP.The results showed that rare earth modified the types and the morphologies of inclusions in the weathering steels.The small spherical rare earth oxysulfides and rare earth sulphides replaced the elongated MnS inclusions in the RE weathering steels.The rare earth inclusions dispersedly distributed and most inclusions were smaller than 2 μm in size.The optimum content of RE was 0.0065%-0.016% for 10PCuRE weathering steels containing about0.002% oxygen and 0.004% sulfur.Solid-soluble content of rare earth in steels was(14-20)x 10-6,which can act as a micro-alloying element.The corrosion resistance of 10PCuRE weathering steels and Q235 were studied by dry-wet cyclic immersion test.Their corrosion rates were obtained respectively.The polarization curves and pitting corrosion behaviors of weathering steels with and without rare earth were measured by electrochemical methods.The corrosion resistance of Cu-P weathering steels was improved by adding an appropriate amount of rare earth.Less and fewer rare earth inclusions largely decreased pitting susceptibility and rate of pit propagation.The pitting potential and the resistance against pitting corrosion of the RE weathering steel were significantly improved due to the modification of rare earth to inclusions.     

Lanthanide NIR luminescence for telecommunications, bioanalyses and solar energy conversion

Present-day advanced technologies heavily rely on the exciting magnetic and spectroscopic properties of lanthanide ions. In particular, their ability to generate well-characterized and intense near-infrared (NIR) luminescence is exploited in any modern fiber-optic telecommunication network. In this feature article, we first summarize the whereabouts underlying the design of highly luminescent NIR molecular edifices and materials. We then focus on describing the main trends in three applications related to this spectral range: telecommunications, biosciences, and solar energy conversion. In telecommunications, efforts concentrate presently on getting easily processable polymer-based waveguide amplifiers. Upconversion nanophosphors emitting in the visible after NIR excitation are now ubiquitous in many bioanalyses while their application to bio-imaging is still in its early stages; however, highly sensitive NIR-NIR systems start to be at hand for both in vitro and in vivo imaging, as well as dual probes combining magnetic resonance and optical imaging. Finally, both silicon-based and dye-sensitized solar cells benefit from the downconversion and upconversion capabilities of lanthanide ions to harvest UV and NIR solar light and to boost the overall quantum efficiency of these next-generation devices.     

Evaluation of D113 cation exchange resin for the removal of Eu(Ⅲ) from aqueous solution

Batch adsorption experiments were conducted for the adsorption of Eu(Ⅲ) ions from aqueous solution by D113 resin. The results indicated that D113 resin could adsorb Eu(Ⅲ) ion effectively from aqueous solution. The adsorption was strongly dependent on pH of the medium with enhanced adsorption as the pH turned from 3.50 to 7.00 and the optimal adsorption condition was in HAc-NaAc medium with pH value of 6.50. The maximum uptake capacity of Eu(Ⅲ) ions was 290.9 mg/g D113 at 298 K, at an initial pH value of 6.50. The overall adsorption process was best described by Lagergren-first-order kinetics. When Freundlich and Langmuir isotherms were tested, the latter had a better fit with the experimental data. The thermodynamic parameters such as free energy (G) which were all negative, indicated that the adsorption of Eu(Ⅲ) ions onto D113 resin was spontaneous and the positive value of enthalpy (H) showed that the adsorption was endothermic in nature. Thomas model was applied to experimental column data to determine the characteristic parameters of column useful for process design. Furthermore, Eu(Ⅲ) could be eluted by using 3.0 mol/L HCl solution and the D113 resin could be regenerated and reused.     

Phase structure and temperature dependent luminescence properties of Sr2LiSiO4F: Eu2+ and Sr2MgSi2O7: Eu2+ phosphors

Green-emitting Sr2LiSiO4F:Eu2+ and blue-emitting Sr2MgSi2O7:Eu2+ phosphors were synthesized by the conventional high temperature solid-state route,respectively.Their structures and photoluminescenee properties were comparatively investigated.It was found that the mixture phases of Sr2MgSi2O7 and SrF2 were obtained when a part of Sr2+ in Sr2LiSiO4F was replaced by some amount of Mg2+ in order to design the possible SrMgLiSiO4F:Eu2+ phosphor.Based on the photoluminescence analysis,Sr2LiSiO4F:Eu2+ phosphor exhibited a green broad emission band of main peak at 513 nm under the excitation of 365 nm,while the Sr2MgSi2O7:Eu2+ and SrMgLiSiO4F:Eu2+ phosphor showed blue emission centered at 467 nm.The temperature dependent photoluminescence properties and room temperature decay time for the three kinds of phosphors were also discussed in this paper.     

Er3+-substituted W-type barium ferrite: preparation and electromagnetic properties

Er3+-substituted W-type barium ferrites Ba1-xErx(Zn0.3Co0.7)2Fe16O27(x=0.00,0.05,0.10,0.15,0.20)were synthesized by polymer adsorbent combustion method.Samples were characterized by X-ray diffraction analysis(XRD),X-ray fluorescence(XRF),scanning electron microscopy(SEM)and network analyzer to investigate the relationships among Er3+concentration,crystal structure,surface mcrphology and electromagnetic properties.All the XRD patterns showed pure phase of W-type barium ferrite when x≤0.15,while the impurity phase of ErFeO3 appeared when x=0.20.The pure W-type barium ferrite showed a hexagonal flake shape.In addition,the microwave electromagnetic properties of samples were analyzed in the frequency range of 2-18 GHz.It was indicated that the electromagnetic properties were significantly improved when Er3+doping content was 0.10.The reasons were also discussed using electromagnetic theory.The optimized ferrite exhibited excellent microwave absoption performance.The maximum of reflection loss(RL)reached about-27.4 dB and RL was below-10dB at the frequency range from 8.4 GHz to 18 GHz,when the thickness was 2.6 mm.     

EXAFS investigation and luminescent properties of nanosized Tb: Lu2O3 phosphors

Nanosized terbium doped Lu2O3 phosphors were synthesized via a modified co-precipitation processing.The as-prepared Tb:Lu2O3 phosphors was consisted of well crystallized nanosized sphere particles with a diameter of about 30 nnx Local structure of Tb ions in Lu2O3 lattice was investigated by an analytical approach based on Fourier transformation of the extended X-ray absorption fine structure(EXAFS) data.X-ray near edge structure (XANES) spectra suggested that all Tb ions doped were tervalonce.EXAFS results indicated that Tb ions have entered the Lu2O3 cubic lattice by means of solid solution.The coordination number and first shell Tb-O distance dropped with the increasing of Tb concentration.Emission spectra of the phosphors was shown to be typical for Tb3+ with main components at 542,550 and 490 nm,derived from irradiative relaxation of 5D4 level.The emission intensity decreased severely with the increasing of Tb concentration from 1 mol.% to 15 tool.%,suggesting a significant concentration quenching above 1 mol.% Tb.The reduction of emission intensity was interpreted by higher distortion derived relaxation among the surface state resident Tb3+ ions.     

Multi-Pass Simulation of Heavy Plate Rolling Including Intermediate Forced Cooling

Thermomechanical Controlled Processing (TMCP) including accelerated cooling after the final hot rolling pass is a well-established technology,widely applied in HSLA steel plate production.However,there are still certain limitations,especially for thicker plate.The rolling schedule includes a long holding period (HP) after the roughing stage to allow the temperature to fall sufficiently for optimised TMCP during finishing.Intermediate Forced Cooling (IFC) applied during the HP can increase productivity by decreasing the required hold time,can restrict austenite grain growth,and can also improve the subsequent strain penetration in thick plate with further metallurgical benefits.Multi-pass plane strain compression (PSC) tests have been performed on the thermomechanical compression (TMC) machine at Sheffield University including different severities of IFC.Clearly it is impossible to simulate all aspects of the temperature and strain gradients present in thick plates in laboratory specimens,and most of the tests were conducted at temperatures and strains calculated by Finite Element modelling as relevant to specific positions through the plate thickness.However,some aspects of the gradients were addressed with tests using cold platens.The results have indeed shown that IFC can shorten the HP and reduce austenite grain growth and its variation across thick plate.     

Overview of Particles and Bubbles in Continuously Cast Steel

This paper gives an overview of phenomena associated with particles and bubbles in continuously cast steel. During steel processing from deoxidation to solidification the inclusion population undergoes changes with opportunities of removal. Flotation is an important separation mechanism. Inclusion particles may accumulate in the solidifying strand, thus forming enriched bands, which depend on the type of casting machine. Bubbles are created during inert gas injection. They also change in size, can float out, but also form accumulation bands. The interaction of bubbles and particles is discussed. Internal structure that recently has been observed on the inner surface of bubbles will be reviewed.     

烦恼 快乐 艺术——池莉“人生三部曲”解读

池莉的"人生三部曲"--<烦恼人生>、<不谈爱情>、<太阳出世>诉尽了普普通通的市民烦恼,小说中主人公被柴米油盐、吃喝拉撒、老婆孩子等琐事所烦着,从而构成他们的"烦恼人生".然而池莉通过自己的艺术创作,以积极的人生态度,又让读者体会到生活本身的快乐,"烦恼人生"中包含着"快乐人生".     

属性块在工程图形中的研究与应用

介绍了在工程图形中用属性块标注表面粗糙度的方法.采用属性块不仅能避免大量重复性的工作,还能节省大量的存储空间,具有提高绘图速度、质量,便于修改,资源共享等应用价值.     

氨基膦酸树脂吸附铈的研究

研究了铈(Ⅲ)在氨基磷酸树脂上的吸附行为。试验结果在pH5.0时,静态饱和吸附容量为197mg/g干树脂;用2mol.L-1HCl洗脱,洗脱率为98.1%;表观速率常数k298=2.71×10-5s-1;等温吸附服从Freundlich经验式;吸附反应中的△Ho=50.0kJ.mol-1,△So=286J.mol-1.K-1,△Go=-35.1kJ.mol-1。树脂功能基与Ce3+的配比为2∶1;并用红外光谱探讨了树脂与铈的成键。     

Preparation of Solid Solutions [Li3xLa0.67-xYyTi1-2yNbyO3] and Its Lithium-ion Conductivity

Ａｗｉｄｅｖａｒｉｅｔｙｏｆｆａｓｔｉｏｎｃｏｎｄｕｃｔｏｒｓ (ａｌｓｏｂｅｃａｌｌｅｄａｆｔｅｒｓｏｌｉｄｅｌｅｃｔｒｏｌｙｔｅｓ)ｗｉｔｈｈｉｇｈｉｏｎｉｃｃｏｎｄｕｃｔｉｖｉｔｙｈａｓｂｅｅｎｄｉｓｃｏｖｅｒｅｄｆｏｒｔｈｅｌａｓｔｔｗｏｄｅｃａｄｅｓ[1 ] .ＬｉｔｈｉｕｍｉｏｎｃｏｎｄｕｃｔｏｒｓａｒｅａｍｏｎｇｔｈｅｍｏｓｔａｔｔｒａｃｔｉｖｅｂｅｃａｕｓｅＬｉｓｙｓｔｅｍｈｏｌｄｓｔｈｅｇｒｅａｔｐｒｏｍｉｓｅｔｏｂｅｕｓｅｄｉｎｈｉｇｈｅｎ ｅｒｇｙｄｅｎｓｉｔｙｂａｔｔｅｒｉｅｓ ,ｄ…     

Thermochemical Study on Coordination Complex of Neodymium Trichloroacetic Acid with 8-Hydroxyquinoline

Ｂｏｔｈｒａｒｅｅａｒｔｈｉｏｎｓ[1 ] ａｎｄ 8 ｈｙｄｒｏｘ ｙｑｕｉｎｏｌｉｎｅｐｏｓｓｅｓｓａｎｔｉｂａｃｔｅｒｉａｌｆｕｎｃｔｉｏｎ[2 ] ,ａｎｄｔｈｅｉｒｃｏｍｐｌｅｘｅｓｈａｖｅｍｏｒｅｐｏｗｅｒｆｕｌｄｉｓｉｎ ｆｅｃｔｉｏｎ .Ｔｈｅｂｉｎａｒｙｃｏｍｐｌｅｘｅｓｏｆｔｈｅｍｗｅｒｅｒｅ ｐｏｒｔｅｄａｓｅａｒｌｙａｓ 1 96 3.Ｍｅａｎｗｈｉｌｅ ,ｔｈｅｒｅ ｓｅａｒｃｈｏｎｔｈｅｔｅｒｎａｒｙｃｏｍｐｌｅｘｅｓｏｆｔｈｅｍｈａｓｂｅｃｏｍｅｖｅｒｙａｃｔｉｖｅｉｎｒｅｃｅｎｔｙｅａｒｓａｎ…     

Anticorrosion Performance of Carbon Steel in 55% LiBr Solution Containing PMA/SbBr3 Inhibitor

The anticorrosion performance of carbon steel in 55% LiBr solution containing PMA/SbBr3 inhibitor was studied by weight-loss tests, electrochemical measurements and surface analysis. In 55%LiBr PMA/SbBr3 solution, corrosion rates of carbon steel at 145 ℃, 175 ℃, 190 ℃ and 240 ℃ are 18.32 μm·a-1, 27.68 μm·a-1, 53.58 μm·a-1 and 73.78 μm·a-1, respectively. PMA/SbBr3 inhibitor may inhibit the corrosion of carbon steel in 55% LiBr solution effectively. Especially, it shows an excellent corrosion inhibition performance at high temperature. Both anodic and cathodic reactions of carbon steel may be inhibited by PMA/SbBr3 inhibitor, so it may be classified as mixed inhibitor. In 55%LiBr PMA/SbBr3 solution, the apparent activation energy of the corrosion reaction of carbon steel is 29.61 kJ·mol-1. The corrosion inhibition mechanism of PMA/SbBr3 is suggested as follows: PMA has the effect of inhibiting hydrogen evolution and a strong oxidizing property; Sb3 also exhibits oxidizing properties, and can exist stably with PMA in LiBr solutions; the passive film comprising Fe2O3 and antimony formed on carbon steel surface may prevent Br- from diffusing into the metal surface due to the synergistic effect of PMA and Sb3 ; As a result, the anticorrosion performance of carbon steel may be improved by PMA/SbBr3 inhibitor in 55% LiBr solution.     

塑料燃烧热重动力学与热动力学分析

利用热分析-质谱联用技术进行了塑料燃烧的实验研究,探讨了这类聚合物的燃烧机理,并采用热重动力学和热动力学解析方法定量分析了塑料燃烧的动力学参数.研究表明,塑料燃烧过程一步完成.塑料的DSC热动力学活化能参数分别对应3个温度区间的反应,活化能值都比较高,在300 kJ· mol-1以上,在反应的后期甚至达到842 kJ·...     

DIBK-TBP萃取分离锆铪的热力学研究

对二异丁基甲酮(DIBK)和TBP从HSCN介质中协同萃取锆铪的性能及热力学进行研究,采用对数函数外推法求得DIBK-TBP体系萃取反应的热力学平衡常数分别为log(K12,Zr)=4.73和log(K12,Hf)=-5.09,锆铪与SCN-形成配合物Zr(SCN)3+和Hf(SCN)3+的稳定性常数分别为1×109.86和1×10-0.80,而铪的分配比在硫氰酸盐存在时要大于锆的分配比,说明过渡金属离子锆和铪在硫氰酸盐存在时与一般金属离子与配位体形成的配合物的稳定性常数愈大,金属离子的分配比愈大的规律相矛盾,并计算出萃取反应的焓变分别为ΔHZr=-11.43 kJ.mol-1和ΔHHf=-7.80 kJ.mol-1,说明对锆铪的萃取反应为放热反应,升高温度不利于萃取反应的进行,常温下自由能变分别为ΔGZr=-26.54 kJ.mol-1和ΔGHf=28.57 kJ.mol-1,熵变分别为ΔSZr=51.54 J.(K.mol)-1和ΔSHf=-124.07 J.(K.mol)-1,说明铪离子比锆离子更易与SCN-形成配位键,从而生成中性分子Hf(SCN)4与有机相发生溶剂化作用而进入有机相中。     

Formation and Characterization of Li0.24 ＋ 2x La0.59-x Mx TiO3-LaPO4 （M = K, Na） System

Ionic conductingsolid materials has received con-siderable attention in the last few years due to theirpotential utilityin high energy batteries and other elec-trochemical devices . Several systems of lithium fastion conductors ,such as γ-Li3PO4-type sol…     

宽温型AB5储氢合金结构及其电化学性能研究

用高频感应熔炼法制备了Mm(NiCoAlMn)5储氢合金,采用模拟电池法测试了合金在238～323 K温度范围内的活化、放电容量和高倍率放电性能.结果表明:制备合金为典型AB5型储氢合金,303K温度条件下吸氢量达到1.38％(质量分数),氢化物生成焓为32.36 kJ ·mol-1H2.合金电极的活化性能、放电容量和高倍率性能受温度影响显著.室温预活化可有效改善电极的低温性能,经室温预活化后合金电极在238 K最大放电容量达到336 mAh·g -1,明显高于未经室温预活化的最大放电容量25 mAh·g-1.Mm(NiCoMn)5贮氢合金电极的高倍率性能随着温度的升高先升高后降低,273和303 K温度条件下合金保持高倍率性能良好,3C放电电流密度条件下容量保持率均高于80％;238 K温度条件下合金的大电流放电性能急剧降低,1C放电电流密度条件下容量保持率仅为10％; 273 K下合金电极的综合性能最佳,最大放电容量达到340 mAh·g-1,300 mA·g-1放电电流密度下的高倍率放电比率为86％.循环伏安法测试证实,在238～323 K范围内,电极的氧化峰峰值电流(Ip)与扫描速度的平方根(v1/2)之间均存在良好的线性关系,整个电极反应受氢原子扩散控制;随着温度的降低氢扩散系数急剧下降,从而导致该合金电极的低温高倍率放电性能变差.由Arrhenius公式计算出合金中的氢扩散活化能为10.56 kJ·mol -1.     

Preparation of Sm_2Fe_(17)Alloys in Ca-Sm_2O_3-Fe System

Sm2Fe17alloyisanimportantprecursorforthe preparationofSm2Fe17Nxmagnet.Sincethenitrogen containedSm2Fe17(Sm2Fe17Nx)alloy,asapermanent magnetmaterial,possessesahigherCurietempera ture,largeranisotropyfield,betterresistancetooxi dationandthermalstability,and…     

烧结矿应用于化学链燃烧的反应特性

本文通过热重实验研究了烧结矿作为载氧体的H₂还原反应特性,将其与通过溶解法制备的Fe₂O₃/Al₂O₃载氧体进行了氧化还原反应性比较,在500~1250℃范围内研究了温度对于烧结矿还原反应过程的影响,在950℃下进行了30次循环反应实验,采用四种模型进行了反应动力学分析.结果表明,烧结矿的H₂还原转化率大于80%,可以完全再氧化,并具有良好的循环反应性能.在500~950℃范围内,随温度升高还原反应速率及最终转化率都显著增加;而当温度高于1100℃时,在反应后期还原反应速率和最终转化率有下降的趋势.在500~950℃范围内,对烧结矿的还原过程第一反应阶段(Fe₂O₃-Fe₃O₄/FeO,还原转化率< 25%)可采用二阶反应模型(M2)拟合,得到表观活化能为E=36.018 kJ·mol-1,指前因子为A₀=1.053×10-2 s -1;第二反应阶段(Fe₃O₄/FeO-Fe,还原转化率> 25%)采用收缩核模型(M4)拟合,得到的表观活化能为E=51.176 kJ·mol-1,指前因子为A₀=1.066×10-2 s -1.