Photoluminescence of Ga<Subscript>2</Subscript>S<Subscript>3</Subscript>:Sm<Superscript>2+</Superscript> crystals

The photoluminescence spectra of Ga₂S₃:Sm²⁺ crystals have been measured in a wide temperature range (77–450 K). The results have been used to identify the mechanisms of the luminescence and energy transfer from the host to the rare-earth ion.     

Temperature effect on the photoluminescence intensity and Eu<Superscript>2+</Superscript> excited state lifetime in EuGa<Subscript>2</Subscript>S<Subscript>4</Subscript> and EuGa<Subscript>2</Subscript>S<Subscript>4</Subscript>:Er<Superscript>3+</Superscript>

The photoluminescence (PL) spectra and Eu²⁺ excited state lifetime of EuGa₂S₄ and EuGa₂S₄:Er³⁺ have been studied in the range 78–500 K. The spectra show a band at 545 nm, due to the 4f ⁶5d → 4f ⁷(⁸ S _7/2) transition. With increasing temperature, the full width at half maximum Γ(T) of the PL band of EuGa₂S₄ and EuGa₂S₄:Er³⁺ crystals increases from 0.15 to 0.22 and from 0.13 to 0.19 eV, respectively. Over the entire temperature range studied, Γ(T) is a linear function of T ^1/2. The 545-nm emission intensity and Eu²⁺ excited state lifetime in EuGa₂S₄ and EuGa₂S₄:Er³⁺ vary exponentially with temperature. The luminescence quenching energies evaluated from the Arrhenius plots of I(10³/T) and τ(10³/T) coincide (0.10 eV) within the error of determination.     

Persistent luminescence of Zn<Subscript>2</Subscript>GeO<Subscript>4</Subscript>:Mn<Superscript>2+</Superscript>/Pr<Superscript>3+</Superscript> phosphors

Zn₂GeO₄, Zn₂GeO₄:Mn²⁺, Zn₂GeO₄:Pr³⁺ and Zn₂GeO₄:Mn²⁺/Pr³⁺ phosphors were fabricated by a solid state reaction. The phase and luminescent properties of the fabricated phosphors were investigated. The XRD patterns show that all of the fabricated phosphors have an orthorhombic structure. The fabricated Zn₂GeO₄ shows an emission band in the range of 350–550 nm. The fabricated Zn₂GeO₄:Mn²⁺ and Zn₂GeO₄:Pr³⁺ phosphors show emission bands corresponding to Mn²⁺ and Pr³⁺ ions, respectively. The fabricated Zn₂GeO₄:Mn²⁺/Pr³⁺ phosphor shows the emission band results from Mn²⁺ and the codoped Pr³⁺ enhances the emission intensity of Mn²⁺. Moreover, Zn₂GeO₄:Mn²⁺/Pr³⁺ phosphor exhibits longer decay time than that of Zn₂GeO₄:Mn²⁺. The higher intensity and longer lifetime of Mn²⁺ emission are induced by the energy transfer from Pr³⁺ of various vacancies to Mn²⁺ in Zn₂GeO₄:Mn²⁺/Pr³⁺ phosphors.     

Radiative recombination in CdGa<Subscript>2</Subscript>S<Subscript>4</Subscript> single crystals

We have studied the effects of light polarization and temperature on the photoluminescence spectrum of CdGa₂S₄ single crystals at temperatures from 77 to 300 K. Based on analysis of the present experimental data in conjunction with earlier band structure, optical absorption, and photoconductivity data, we have identified the mechanism of radiative recombination in CdGa₂S₄.     

Ionic liquid microemulsion-assisted synthesis and improved photocatalytic activity of ZnIn<Subscript>2</Subscript>S<Subscript>4</Subscript>

This paper reported the fabrication of high-performance ZnIn₂S₄ photocatalysts using ionic liquid microemulsion-mediated hydrothermal method under facile conditions. The influences of reaction temperature and aging time on the catalytic properties of the specimens were investigated. The crystal phase, optical property, and morphological structure of the obtained catalysts were characterized using X-ray diffraction, UV–visible spectrometer, electronic microscope, and N₂ adsorption–desorption techniques. The results indicated that all of the ZnIn₂S₄ samples prepared by this method consisted of the hexagonal phase and exhibited excellent photoresponse capability and photocatalytic performance. The sample prepared at 60 °C with an aging time of 6 h showed the best photocatalytic performance, and the corresponding degradation rate of methyl orange was measured as 98.5% after 10 min. The current study highlights an efficient and environmental method for the formulation of high-performance ZnIn₂S₄.     

Recombination luminescence of CaI<Subscript>2</Subscript> crystals activated with Eu<Superscript>2+</Superscript>, Gd<Superscript>2+</Superscript>, Tl<Superscript>+</Superscript>, Pb<Superscript>2+</Superscript>, and Mn<Superscript>2+</Superscript>

The spectral characteristics of thermostimulated luminescence, steady-state roentgenoluminescence and photostimulated luminescence (PSL) buildup and decay kinetics, and the effect of IR irradiation on the roentgenoluminescence yield and glow curves of CaI₂:Eu²⁺, CaI₂:Gd²⁺, CaI₂:Tl⁺, CaI₂:Pb²⁺, CaI₂:Mn²⁺, and CaI₂: Pb²⁺, Mn²⁺ crystals grown by the Bridgman-Stockbarger method have been studied in the temperature range 90–295 K. Coupled with earlier data, the present results on the influence of oxygen and hydrogen impurities on the spectral characteristics of CaI₂ indicate that the activation of calcium iodide with Eu²⁺, Gd²⁺, Tl⁺, Pb²⁺, and Mn²⁺ leads to the formation of cation impurity-native defect complexes, which act as carrier traps and are responsible for the thermostimulated luminescence in the range 150–295 K. IR exposure after 90-K x-ray excitation gives rise to flash PSL and influences the thermostimulated luminescence light sum. The nature of the emission and trapping centers involved and the mechanisms of recombination luminescence excitation in the crystals are discussed.     

X-ray dosimetric properties of vapor-grown CdGa<Subscript>2</Subscript>S<Subscript>4</Subscript> single crystals

CdGa₂S₄ single crystals have been grown from a presynthesized source material by closed-tube iodine vapor transport, and their X-ray dosimetric properties have been studied. Their X-ray sensitivity coefficient K ranges from K = 1.26 × 10⁻¹¹ to 1.39 × 10⁻¹⁰ A min/(V R) at effective X-ray hardnesses V _a = 25–50 keV and dose rates E = 0.75–78.05 R/min, and increases with X-ray dose. The K(V _a) curve has a negative slope, in contrast to the K(E) curve. The photocurrent-dose curves of the CdGa₂S₄ single crystals demonstrate that the steady-state X-ray photocurrent is a power-law function of X-ray dose rate: ΔI _E,0 ∼ E ^α . With increasing V _a, the slope of the curves sharply decreases and α approaches unity.     

Synthesis and luminescence properties of Eu<Superscript>2+</Superscript>-doped Li<Subscript>2</Subscript>SrSiO<Subscript>4</Subscript>

We have studied the luminescence spectra of Li₂Sr_{1 − x} Eu _x SiO₄ (x = 0.0001–0.01) solid solutions prepared by solid-state reactions and a sol-gel process in a reducing atmosphere. The spectra show a broad band in the range 500–700 nm, centered at 578 nm, which is due to the 4f ⁶5d → 4f ⁷ transition. The luminescence excitation spectrum shows, in addition to bands due to Eu²⁺ 4f ⁷ → 4f ⁶5d transitions, a strong band centered at 174 nm, attributable to absorption in the SiO₄⁴⁻ group.     

Roles of doping ions in persistent luminescence of SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript>:Eu<Superscript>2+</Superscript>, RE<Superscript>3+</Superscript> phosphors

The polycrystalline Eu²⁺ and RE³⁺ co-doped strontium aluminates SrAl₂O₄:Eu²⁺, RE³⁺ were prepared by solid state reactions. The UV-excited photoluminescence, persistent luminescence and thermo-luminescence of the SrAl₂O₄:Eu²⁺, RE³⁺ phosphors with different composition and doping ions were studied and compared. The results showed that the doped Eu²⁺ ion in SrAl₂O₄:Eu²⁺, Dy³⁺ phosphors works as not only the UV-excited luminescent center but also the persistent luminescent center. The doped Dy³⁺ ion can hardly yield any luminescence under UV-excitation, but can form a electron trap with appropriate depth and greatly enhance the persistent luminescence and thermo-luminescence of SrAl₂O₄:Eu²⁺. Different co-doping RE³⁺ ions showed different effects on persistent luminescence. Only the RE³⁺ ion (e.g. Dy³⁺, Nd³⁺), which has a suitable optical electro-negativity, can form the appropriate electron trap and greatly improve the persistent luminescence of SrAl₂O₄:Eu²⁺. Based on above observations, a persistent luminescence mechanism, electron transfer model, was proposed and illustrated.     

Frequency-dependent dielectric properties and electrical conductivity of CdIn<Subscript>2</Subscript>S<Subscript>4</Subscript> single crystals

The real (ɛ) and imaginary (ɛ″) parts of complex dielectric permittivity and ac conductivity (σ_ac) of CdIn₂S₄ single crystals (cubic structure) have been measured in the frequency range f = 5 × 10⁴ to 3.5 × 10⁷ Hz. The results demonstrate that the dielectric dispersion in the crystals has a relaxation nature. In the frequency range f = 5 × 10⁴ to 3.5 × 10⁷ Hz, the ac conductivity of single-crystal CdIn₂S₄ follows the relation σ_ac ∼ f ^0.8, characteristic of hopping conduction through localized states near the Fermi level.     

Synthesis,tunable luminescence and thermal stability of Mg<Subscript>2</Subscript>Al<Subscript>4</Subscript>Si<Subscript>5</Subscript>O<Subscript>18</Subscript>:Ce<Superscript>3+</Superscript>/Mn<Superscript>2+</Superscript> phosphors

Ce³⁺/Mn²⁺ singly doped and codoped Mg₂Al₄Si₅O₁₈ phosphors were synthesized by a solid state reaction. The phase, luminescent properties and thermal stability of the synthesized phosphors were investigated. Ce³⁺ and Mn²⁺ singly doped Mg₂Al₄Si₅O₁₈ phosphors show emission bands locating in blue and yellow–red regions, respectively. In Ce³⁺ and Mn²⁺ codoped Mg₂Al₄Si₅O₁₈, tunable luminescence was obtained because of the energy transfer from Ce³⁺ to Mn²⁺. In Mg₂Al₄Si₅O₁₈:Ce³⁺/Mn²⁺ phosphors with a fixed Ce³⁺ concentration, energy transfer efficiency increases with the increasing Mn²⁺ concentration, which is confirmed by the continually decreasing intensity and shortening decay time of Ce³⁺ emission. Moreover, the luminescent properties and thermal stability provide a great significance on the applications in the field of light emitting diodes.     

Tunable luminescence properties and energy transfer of single-phase Ca<Subscript>4</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>O: Dy<Superscript>3+</Superscript>, Eu<Superscript>2+</Superscript> multi-color phosphors for warm white light

The novel Ca_4?x(PO₄)₂O: xDy³⁺ and Ca_4?x?y(PO₄)₂O: xDy³⁺, yEu²⁺ multi-color phosphors were synthesized by traditional solid-state reaction. The crystal structure, particle morphology, photoluminescence properties and energy transfer process were investigated in detail. The X-ray diffraction (XRD) results demonstrate that the products showed pure monoclinic phase of Ca₄(PO₄)₂O when x < 0.1. The scanning electron microscopy (SEM) indicated that the phosphors were grain-like morphologies with diameters of ~ 3.7–7.0 μm. Under excitation of 345 nm, Dy³⁺-doped Ca₄(PO₄)₂O phosphors showed multi-color emission bands at 410, 481 and 580 nm originated from oxygen vacancies and Dy³⁺. Interestingly, Ca₄(PO₄)₂O: Dy³⁺, Eu²⁺ phosphors exhibited blue emission band at 481 nm and broad emission band from 530 to 670 nm covering green to red regions. The energy transfer process from Dy³⁺ to Eu²⁺ was observed for the co-doped samples, and the energy transfer efficiency reached to 60% when Eu²⁺ molar concentration was 8%. In particular, warm/cool/day white light with adjustable CCT (2800–6700 K) and high CRI (R_a > 85) can be obtained by changing the Eu²⁺ co-doping contents in Ca₄(PO₄)₂O: Dy³⁺, Eu²⁺ phosphors. The optimized Ca_3.952(PO₄)₂O: 0.04Dy³⁺, 0.008Eu²⁺ phosphor can achieve the typical white light with CCT of 4735 K and CRI of 87.     

Luminescent properties of Pb<Superscript>2+</Superscript>- and Mn<Superscript>2+</Superscript>-activated CdI<Subscript>2</Subscript> crystals

The luminescent properties of CdI₂, CdI₂:Pb²⁺, CdI₂:Mn²⁺, and CdI₂:Pb²⁺,Mn²⁺) crystals have been studied at temperatures from 85 to 295 K under optical and x-ray excitation. Analysis of new and earlier spectroscopic data suggests that the 560-nm luminescence of CdI₂:Pb²⁺ and CdI₂:(Pb²⁺,Mn²⁺) crystals under excitation on the long-wavelength component of the A absorption band of Pb²⁺ centers is due to Pb²⁺-bound anion excitons. The 640-to 660-nm emission of these crystals is attributable to α centers. The manganese luminescence in the codoped material originates from both intracenter Mn²⁺ excitations and a sensitized process due to energy transfer from the host and Pb²⁺-related centers. The mechanisms of recombination and energy transfer processes in cadmium iodide crystals codoped with Pb²⁺ and Mn²⁺ are discussed.     

Influence of Mg<Superscript>2+</Superscript>/Ga<Superscript>3+</Superscript> doping on luminescence of Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript>:Ce<Superscript>3+</Superscript> phosphors

Mg²⁺/Ga³⁺ doped Y₃Al₅O₁₂:Ce³⁺ phosphors were synthesized through a solid state reaction. The phase and luminescent of the synthesized phosphors were investigated. For Ga³⁺ codoped Y_2.96Ce_0.04Al_(5?x)Ga_xO₁₂ phosphors, the emission intensity increases with the increase of Ga³⁺ concentration up to Y_2.96Ce_0.04Al_4.80Ga_0.20O₁₂ and then decreases with a further increase of Ga³⁺ concentration, but the emission peak shifts to shorter wavelength continuously in the Ga³⁺ doping concentration range of 0.05–0.25. For Mg²⁺/Ga³⁺ codoped Y_2.96Ce_0.04Al_(4.8?y)Ga_0.20Mg_yO₁₂ phosphors, the emission intensity decreases and the emission peak shifts to longer wavelength continuously in the Mg²⁺ doping concentration range of 0.02–0.12. The emission spectra of Y_2.96Ce_0.04Al_(4.8?y)Ga_0.20Mg_yO₁₂ phosphors demonstrate that the codoped Mg²⁺/Ga³⁺ ions not only induce the enhancement of Y_2.96Ce_0.04Al₅O₁₂ emission intensity but also lead to the red shift of Y_2.96Ce_0.04Al₅O₁₂ emission peak. The decay lifetimes decrease in Mg²⁺/Ga³⁺ codoped Y_2.96Ce_0.04Al₅O₁₂ phosphors due to defects formed by substitutions of Y³⁺ by Mg²⁺/Ga³⁺.     

Color-tunable luminescence properties of Sm<Superscript>3+</Superscript>/Dy<Superscript>3+</Superscript> co-doped NaLa(MoO<Subscript>4</Subscript>)<Subscript>2</Subscript> phosphors and their energy transfer mechanism

The Sm³⁺, Dy³⁺ doped and Sm³⁺/Dy³⁺ co-doped NaLa(MoO₄)₂ spherical phosphors were hydrothermally synthesized by the EDTA-2Na mediated method. Under the excitation of 297 nm, the quenching concentration of Sm³⁺ in NaLa(MoO₄)₂ host was determined to be 13%, and the concentration quenching mechanism was discussed to be the electric quadrupole–quadrupole interaction. After Sm³⁺ and Dy³⁺ ions were co-doped into the NaLa(MoO₄)₂ host, the energy transfer behaviors resulted from Dy³⁺ to Sm³⁺ ions were investigated by the help of the luminescent spectra of the obtained phosphors. By varying co-doping concentrations of Sm³⁺/Dy³⁺ ions, the emission color of NaLa(MoO₄)₂:Sm³⁺/Dy³⁺ can be tuned from reddish-orange, pink and white to bluish-green. The CIE chromaticity coordinate, the correlated color temperature and the quantum efficiency of NaLa_0.87(MoO₄)₂:1%Sm³⁺, 12%Dy³⁺ were calculated to be (0.356, 0.320), 4353 K and 20%, respectively. Furthermore, in the temperature-dependent analysis, it presented good thermal stability, which can become a promising single-phased white-emitting phosphor for white LEDs devices. Based on these results, the possible energy transfer mechanism between Dy³⁺ and Sm³⁺ in NaLa(MoO₄)₂:Sm³⁺/Dy³⁺ was also proposed.     

Growth and thermal expansion of In<Subscript>2</Subscript>S<Subscript>3</Subscript> single crystals

In₂S₃ single crystals have been grown by the Bridgman-Stockbarger method. Their composition has been determined by electron probe x-ray microanalysis, and their phase-transition temperatures have been evaluated by differential thermal analysis. The thermal expansion coefficient of In₂S₃ has been determined in the range 80–1000 K by dilatometry.     

Microwave synthesis and luminescence properties of YVO<Subscript>4</Subscript>:Eu<Superscript>3+</Superscript>

Europium-doped YVO₄ phosphors have been synthesized using microwave radiation of 700 W power. The uniformity and high rate of microwave heating, as well as “nonthermal” effects of microwave radiation, considerably accelerate the decomposition of precursors and YVO₄:Eu³⁺ synthesis. The europium concentration was varied from 1 to 8 at %. The luminescence intensity of YVO₄:Eu³⁺ was shown to depend on Eu³⁺ concentration, with a maximum at 8 at % Eu³⁺. According to transmission electron microscopy data, the synthesized phosphors consist of nanoparticles 6 to 8 nm in size, with an appreciable degree of agglomeration.     

Single phased Sr<Subscript>3</Subscript>La(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>:Eu<Superscript>2+</Superscript>/Mn<Superscript>2+</Superscript> phosphors: solid state synthesis,tunable luminescence and potential applications in white light LEDs

A series of Sr₃La(PO₄)₃:Eu²⁺/Mn²⁺ phosphors were synthesized by a solid state reaction. The phase and the optical properties of the synthesized phosphors were investigated. The XRD results indicate that the doped Eu²⁺ and Mn²⁺ ions do not change the phase of Sr₃La(PO₄)₃. The peak wavelengths of Eu²⁺ single doped and Eu²⁺/Mn²⁺ codoped Sr₃La(PO₄)₃ phosphors shift to longer wavelength due to the larger crystal field splitting for Eu²⁺ and Mn²⁺. The increases of crystal field splitting for Eu²⁺ and Mn²⁺ are induced by the substitution of Sr²⁺ by Eu²⁺ and Mn²⁺ in Sr₃La(PO₄)₃ host. Due to energy transfer from Eu²⁺ to Mn²⁺ in Sr₃La(PO₄)₃:Eu²⁺/Mn²⁺ phosphors, tunable luminescence was obtained by changing the concentration of Mn²⁺. And the white light was emitted by Sr₃La(PO₄)₃:3.0 mol%Eu²⁺/4.0 mol%Mn²⁺ and Sr₃La(PO₄)₃:3.0 mol%Eu²⁺/5.0 mol%Mn²⁺ phosphors.     

Comparative crystal field calculations of the Cr<Superscript>3+</Superscript> energy level schemes in ZnAl<Subscript>2</Subscript>S<Subscript>4</Subscript> and ZnGa<Subscript>2</Subscript>O<Subscript>4</Subscript>

The exchange charge model of crystal field (which includes the covalent effects) is used to analyze the energy level schemes of Cr³⁺ ion in ZnAl₂S₄ and ZnGa₂O₄ crystals with spinel structure. Calculations of the overlap integrals and crystal field parameters were performed before getting the Cr³⁺ energy levels. The calculated energy level schemes are compared with available experimental data; a new interpretation of the absorption peaks is suggested.     

Ultraviolet upconversion luminescence in Y<Subscript>2</Subscript>O<Subscript>3</Subscript>:Yb<Superscript>3+</Superscript>,Tm<Superscript>3+</Superscript> nanocrystals and its application in photocatalysis

Infrared-to-ultraviolet upconversion luminescence agent Y₂O₃:Yb³⁺,Tm³⁺ was prepared by a combustion method using citrate as a fuel/reductant. The prepared sample was characterized by X-ray diffraction, SEM, and fluorescence spectrophotometer. Two unusual ¹I₆ → ³H₆ (~297 nm) and ¹D₂ → ³H₆ (~363 nm) emissions from Tm³⁺ ions were observed at room temperature under 980-nm laser excitation. The change of upconversion emission intensity depending on the Yb³⁺ concentrations was discussed. The results showed that modest Yb³⁺ doping could make the upconversion emission of Tm³⁺ intense, and high Yb³⁺ concentrations might lead to fluorescence quenching. Moreover, the influence of ultraviolet upconversion luminescence on the photodegradation of methyl orange aqueous solution under solar light irradiation in the presence of TiO₂ catalyst doped with Y₂O₃:Yb³⁺,Tm³⁺ was also investigated. It was concluded from the experiment of this study that TiO₂/Y₂O₃:Yb³⁺,Tm³⁺ composite had higher photocatalytic activity than pure TiO₂ under solar light. This study would make TiO₂ utilize sunlight more efficiently and accelerate the practical application of photocatalytic technology in water treatment region.