High‐resolution thermogravimetry of poly(2,6‐dimethyl‐1,4‐phenylene oxide)

The thermal degradation and kinetics of poly(2,6‐dimethylphenylene oxide) (PPO) were studied by high‐resolution thermogravimetry. The thermogravimetry measurements were conducted at an initial heating rate of 50°C min⁻¹, resolution 4.0, and sensitivity 1.0 in both nitrogen and air from room temperature to 900°C. A two‐step degradation process was clearly revealed in air at the temperatures of 430°C and 521°C. The thermal degradation temperatures and kinetic parameters of the PPO appear to be higher in air than in nitrogen, indicative of a higher thermostability in air. The temperature, activation energy, order, and frequency factor of the thermal degradation of the PPO in nitrogen are 419°C, 100–120 kJ mol⁻¹, 0.5, and 13–17 min⁻¹, respectively. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1887–1892, 1999     

Thermal degradation kinetics of thermotropic poly(p‐oxybenzoate‐co‐p,p′‐biphenylene terephthalate) fiber

An advanced heat‐resistant fiber (trade name Ekonol) spun from a nematic liquid crystalline melt of thermotropic wholly aromatic poly(p‐oxybenzoate‐p,p′‐biphenylene terephthalate) has been subjected to a dynamic thermogravimetry in nitrogen and air. The thermostability of the Ekonol fiber has been studied in detail. The thermal degradation kinetics have been analyzed using six calculating methods including five single heating rate methods and one multiple heating rate method. The multiple heating‐rate method gives activation energy (E), order (n), frequency factor (Z) for the thermal degradation of 314 kJ mol⁻¹, 4.1, 7.02 × 10²⁰ min⁻¹ in nitrogen, and 290 kJ mol⁻¹, 3.0, 1.29 × 10¹⁹ min⁻¹ in air, respectively. According to the five single heating rate methods, the average E, n, and Z values for the degradation were 178 kJ mol⁻¹, 2.1, and 1.25 × 10¹⁰ min⁻¹ in nitrogen and 138 kJ mol⁻¹, 1.0, and 6.04 × 10⁷ min⁻¹ in air, respectively. The three kinetic parameters are higher in nitrogen than in air from any of the calculating techniques used. The thermostability of the Ekonol fiber is substantially higher in nitrogen than in air, and the decomposition rate in air is higher because oxidation process is occurring and accelerates thermal degradation. The isothermal weight‐loss results predicted based on the nonisothermal kinetic data are in good agreement with those observed experimentally in the literature. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1923–1931, 1999     

Thermal degradation of Kevlar fiber by high‐resolution thermogravimetry

A novel high‐resolution thermogravimetry (TG) technique in a variable heating rate mode that maximizes resolution and minimizes the time required for TG experiments has been performed for evaluating the thermal degradation and its kinetics of Kevlar fiber in the temperature range ∼ 25–900°C. The degradation of Kevlar in nitrogen or air occurs in one step. The decomposition rate and char yield at 900°C are higher in air than in nitrogen, but the degradation temperature is higher in nitrogen than in air. The initial degradation temperature and maximal degradation rate for Kevlar are 520°C and 8.2%/min in air and 530°C and 3.5%/min in nitrogen. The different techniques for calculating the kinetic parameters are compared. The respective activation energy, order, and natural logarithm of preexponential factor of the degradation of Kevlar are achieved at average values of 133 kJ/mol (or 154 kJ/mol), 0.7 (or 1.1), and 16 min⁻¹ (or 20 min⁻¹) in air (or nitrogen). The technique based on the principle that the maximum weight loss rate is observed at the minimum heating rate gives thermal degradation results that were in excellent agreement with values determined by traditional TG experiments. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 565–571, 1999     

Thermal decomposition kinetics of thermotropic copolyesters made from trans‐p‐hydroxycinnamic acid and p‐hydroxybenzoic acid

A series of thermotropic copolyesters were synthesized by direct thermal melt polycondensation of p‐acetoxybenzoic acid (PHB) with trans‐p‐acetoxycinnamic acid (PHC). The dynamic thermogravimetric kinetics of the copolyesters in nitrogen were analyzed by four single heating‐rate techniques and three multiple heating‐rate techniques. The effects of the heating rate, copolyester composition, degradation stage, and the calculating techniques on the thermostability and degradation kinetic parameters of the copolyesters are systematically discussed. The four single heating‐rate techniques used in this work include Friedman, Freeman–Carroll, Chang, and the second Kissinger techniques, whereas the three multiple heating‐rate techniques are the first Kissinger, Kim–Park, and Flynn–Wall techniques. The decomposition temperature of the copolyesters increases monotonically with increasing PHB content from 40 to 60 mol %, whereas their activation energy exhibits a maximal value at the PHB content of 50 mol %. The decomposition temperature, activation energy, the order, and the frequency factor of the degradation reaction for the thermotropic copolyester with PHB/PHC feed ratio of 50/50 mol % were determined to be 374°C, 408 kJ/mol, 7.2, and 1.25 × 10²⁹ min^?1, respectively. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 445–454, 2004     

Synthesis,characterization and thermal degradation of poly[2‐(3‐p‐bromophenyl‐3‐methylcyclobutyl)‐2‐hydroxyethylmethacrylate]

In this work, 2‐(3‐p‐bromophenyl‐3‐methylcyclobutyl)‐2‐hydroxyethylmethacrylate (BPHEMA) [monomer] was synthesized by the addition of methacrylic acid to 1‐epoxyethyl‐3‐bromophenyl‐3‐methyl cyclobutane. The monomer and poly(BPHEMA) were characterized by FT‐IR and [¹H] and [¹³C]NMR. Average molecular weight, glass transition temperature, solubility parameter, and density of the polymer were also determined. Thermal degradation of poly[BPHEMA] was studied by thermogravimetry (TG), FT‐IR. Programmed heating was carried out at 10 °C min⁻¹ from room temperature to 500 °C. The partially degraded polymer was examined by FT‐IR spectroscopy. The degradation products were identified by using FT‐IR, [¹H] and [¹³C]NMR and GC‐MS techniques. Depolymerization is the main reaction in thermal degradation of the polymer up to about 300 °C. Percentage of the monomer in CRF (Cold Ring Fraction) was estimated at 33% in the peak area of the GC curve. Intramolecular cyclization and cyclic anhydride type structures were observed at temperatures above 300 °C. The liquid products of the degradation, formation of anhydride ring structures and mechanism of degradation are discussed. © 1999 Society of Chemical Industry     

Thermogravimetric kinetics of thermotropic copolyesters containing p‐oxybenzoate unit by multiple heating‐rate methods

Two series of thermotropic liquid crystalline copolyesters containing mainly the p‐oxybenzoate unit were studied by thermogravimetry to ascertain the kinetic parameters of their thermal degradation by six multiple heating‐rate techniques for the first time. The two copolyesters are (1) poly(p‐oxybenzoate‐co‐ethylene terephthalate‐co‐vanillate) and (2) poly(p‐oxybenzoate‐co‐2,6‐oxynaphthoate). The effect of copolymer composition, degradation stage, and test atmosphere on the three kinetic parameters of the thermal degradation in the weight loss range from 5 to 70% is discussed. Comparison of the multiple heating‐rate techniques with single heating‐rate techniques for calculating the kinetic parameters of thermal degradation was made. The respective activation energy, order, and natural logarithm of the frequency factor of the thermal degradation in nitrogen for the poly(p‐oxybenzoate‐co‐ethylene terephthalate‐co‐vanillate)s are between 180 and 230 kJ/mol, between 2.0 and 5.0, and between 28 and 38 min⁻¹ for the first degradation step and between 250 and 390 kJ/mol, between 6.4 and 7.6, and between 38 and 64 min⁻¹ for the second degradation step of the poly(p‐oxybenzoate‐co‐ethylene terephthalate‐co‐vanillate)s with the unit‐B content in the range of 70–75 mol %. The respective activation energy, order, and natural logarithm of frequency factor of the first degradation stage for the poly(p‐oxybenzoate‐co‐2,6‐oxynaphthoate) (Vectra) are between 380 and 570 kJ/mol, between 2.0 and 3.1, and between 55 and 68 min⁻¹ in nitrogen and between 160 and 210 kJ/mol, between 0.8 and 1.8, and between 25 and 32 min⁻¹ in air. The best methods of calculating the kinetic parameters of the thermal degradation for the copolymers are suggested. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2016–2028, 1999     

High‐resolution thermogravimetry of poly(4‐methyl‐1‐pentene)

Thermal degradation and kinetics of poly(4‐methyl‐1‐pentene) were investigated by nonisothermal high‐resolution thermogravimetry at a variable heating rate. Thermal degradation temperatures are higher, but the maximum degradation rates are lower in nitrogen than in air. The degradation process in nitrogen is quite different from that in air. The average activation energy and frequency factor of the first stage of thermal degradation for the poly(4‐methyl‐1‐pentene) are 2.4 and 2.8 times greater in air than those in nitrogen, respectively. Poly(4‐methyl‐1‐pentene) exhibits almost the same decomposition order of 2.0 and char yield of 14.3–14.5 wt % above 500°C in nitrogen and air. The isothermal lifetime was estimated based on the kinetic parameters of nonisothermal degradation and compared with the isothermal lifetime observed experimentally. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 2201–2207, 1999     

Thermal properties and crystalline structure of liquid crystalline poly(ethylene terephthalate‐co‐2(3)‐chloro‐1,4‐phenylene terephthalate)

Thermal properties and crystalline structure of liquid crystalline (LC) poly(ethylene terephthalate‐co‐2(3)‐chloro‐1,4‐phenylene terephthalate) [copoly(ET/CPT)] were investigated using differential scanning calorimetry (DSC), thermogravimetry (TGA), limiting oxygen index (LOI) measurement, electron dispersive X‐ray analysis (EDX), X‐ray diffractometry, and infrared spectrometry (IR). The thermal transition temperatures of copoly(ET/CPT) were changed with the composition. Copoly(ET/CPT) showed two thermal decomposition steps and the residues at 700°C and LOI values of copoly(ET/CPT) were almost proportional to its chlorine content. The activation energy of thermal decomposition of LC units was very low compared to that of poly(ethylene terephthalate)(PET) units. Crystal structure of copoly(ET/CPT) (20/80) was of triclinic system with the lattice constants of a = 9.98 A?, b = 8.78 A?, c = 12.93 A?, α = 97.4°, β = 96.1°, and γ = 90.8°, which is very close to that of poly(chloro‐p‐phenylene terephthlate) (PCPT) with the lattice constants of a = 9.51 A?, b = 8.61 A?, c = 12.73 A?, α = 96.8°, β = 95.4°, and γ = 90.8°. When copoly(ET/CPT)(50/50) was annealed at 220°C in vacuum, crystallization induced sequential reordering (CISR) was not observed but the heat of fusion was slightly increased due to the increase of the trans isomer content in PET units. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1286–1294, 2002; DOI 10.1002/app.10451     

Synthesis and Characterization of 1,5‐Dinitro‐2,6‐bis(trinitromethyl)‐3a,4a,7a,8a‐tetrahydro‐[1,4]dioxino[2,3‐d:5,6‐d′]diimidazole (DNTNDI)

The polynitro imidazole derivative 1,5‐dinitro‐2,6‐bis(trinitromethyl)‐3a,4a,7a,8a‐tetrahydro‐[1,4]dioxino[2,3‐d:5,6‐d′]diimidazole (DNTNDI) was synthesized through nitration of 2‐(dinitromethylene)‐1H‐imidazol‐4‐ol in HNO₃/Ac₂O followed by cyclization of the di‐enol. It was characterized by NMR, IR, elemental analysis, and single‐crystal X‐ray diffraction analysis. Compound DNTNDI crystallizes in the orthorhombic space group P2(1)2(1)2(1). The thermal decomposition was studied with thermogravimetry/derivative thermogravimetry (TG/DTG) in a nitrogen atmosphere with a heating rate of 5 K min⁻¹. The TG/DTG analysis indicated that DNTNDI has 97.64 % mass loss between 127 °C and 173 °C by undergoing exothermic decomposition. The density of DNTNDI was determined as 1.906 g cm⁻³ at 293 K with an Ultrapycno 1000 Pycnometer. The denotation velocity and denotation pressure of DNTNDI were calculated as 9325 m s⁻¹ and 40 GPa by applying the LOTUSES (version 1.4) code, respectively. The oxygen balance of DNTNDI is 0 and its oxygen content amounts to 51.78 %, which is superior to that of new generation of chlorine‐free oxidizer ammonium dinitramide (ADN).     

High-resolution thermogravimetry of liquid crystalline copoly(p-oxybenzoate–ethylene terephthalate–m-oxybenzoate)

Thermotropic liquid crystalline terpolymers consisting of three units of p-oxybenzoate (B), ethylene terephthalate (E), and m-oxybenzoate (M), were investigated through high-resolution thermogravimetry to evaluate their stability and kinetic parameters of thermal degradation in nitrogen and air. Overall activation energy data of the first major decomposition was calculated through three calculating methods. Thermal degradation occurs in three major steps in both nitrogen and air. Three kinds of degradation temperatures (T_d, T_m1, T_m2) are slightly higher and the first maximum weight-loss rates are slightly lower in nitrogen than in air, suggesting a higher thermostability in nitrogen. The thermal degradation temperatures range from 450 to 457°C in nitrogen and 441 to 447°C in air and increase with increasing B-unit content at a fixed M-unit content of 5 mol %. The temperatures at the first maximum weight loss rate range from 452 to 466°C in nitrogen and 444 to 449°C in air and increase slightly with an increase in B-unit content. The first and second maximum weight-loss rates are maintained at almost 9.2–10.8 and 4.0–6.1%/min in nitrogen (11.2–12.0 and 3.9–4.2%/min in air) and vary slightly with copolymer composition. The residues after the first major step of degradation are predicted on the basis of the complete exclusion of ester and ethylene groups and hydrogen atoms and compared with those observed experimentally. The char yields at 500°C in both nitrogen and air are larger than 42.6 wt % and increase with increasing B-unit content. However, the char yields at 800°C in nitrogen and air are different. The activation energy and ln(pre-exponential factor) for the first major decomposition are slightly higher in nitrogen than in air and increase with an increase in B-unit content at a given M-unit content of 5 mol %. There is no regular variation in the decomposition order with the variation of copolymer composition and testing atmosphere. The activation energy, decomposition order, and ln(pre-exponential factor) of the thermal degradation for the terpolymers are located in the ranges of 212–263 kJ mol⁻¹, 2.4–3.5, 33–41 min⁻¹, respectively. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 2911–2919, 1999     

Synthesis and characterization of new thermally stable aromatic copoly(ester–amide)s from diester‐dicarboxylic acids

Two new aromatic diester‐dicarboxylic acids containing furan rings, namely, benzofuro[2,3‐b]benzofuran‐2,9‐dicarboxyl‐bis‐pyridyl ester‐4,4′‐dicarboxylic acid and benzofuro[2,3‐b]benzofuran‐2,9‐dicarboxyl‐bis‐phenyl ester‐4,4′‐dicarboxylic acid were synthesized by the reaction of benzofuro[2,3‐b]benzofuran‐2,9‐dicarbonyl chloride with 6‐hydroxynicotinic acid and 4‐hydroxybenzoic acid, respectively. These monomers were converted to aromatic copoly(ester–amide)s by reaction with various aromatic diamines via direct polycondensation. Polymers were characterized by FTIR and ¹H NMR spectroscopy, thermogravimetry, viscosity and solubility tests. The inherent viscosity of the polymers was in the range 0.23–0.46 dl g^?1 in dimethyl sulfoxide at 30 °C. They dissolved readily in polar solvents at room temperature. They possess a glass‐transition temperature in the range 210–260 °C and exhibit excellent thermal stability. Copyright © 2004 Society of Chemical Industry     

Synthesis and properties of novel aromatic poly(ester–amide)s derived from 1,5‐bis(3‐aminobenzoyloxy)naphthalene and aromatic dicarboxylic acids

A new naphthalene‐ring‐containing bis(ester–amine), 1,5‐bis(3‐aminobenzoyloxy)naphthalene, was prepared from the condensation of 1,5‐dihydroxynaphthalene with 3‐nitrobenzoyl chloride followed by catalytic hydrogenation. A series of novel naphthalene‐containing poly(ester–amide)s was synthesized by direct phosphorylation polyamidation from this bis(ester–amine) with various aromatic dicarboxylic acids. The polymers were produced in high yields and had moderate inherent viscosities of 0.47–0.81 dL g^?1. The poly(ester–amide) derived from terephthalic acid was semicrystalline and showed less solubility. Other polymers derived from less rigid and symmetrical diacids were amorphous and readily soluble in most polar organic solvents and could be solution‐cast into transparent, flexible and tough films with good mechanical properties. The amorphous poly(ester–amide)s displayed well‐defined glass transition temperatures of between 179 and 225 °C from differential scanning calorimetry and softening temperatures of between 178 and 211 °C from thermomechanical analysis. These poly(ester–amide)s did not show significant decomposition below 400 °C in nitrogen or air. Copyright © 2004 Society of Chemical Industry     

Novel poly(amide‐hydrazide)s and copoly(amide‐hydrazide)s from bis‐(4‐aminobenzyl) hydrazide and aromatic diacid chlorides: Synthesis and characterization

A new aromatic diamine, viz., bis‐(4‐aminobenzyl) hydrazide (BABH), which contains preformed hydrazide and methylene linkage, was synthesized starting from α‐tolunitrile. The BABH and intermediates involved in its synthesis were characterized by spectroscopic methods. Novel poly(amide‐hydrazide)s were synthesized by low temperature solution polycondensation of BABH with isophthaloyl chloride (IPC) and terephthaloyl chloride (TPC). Furthermore, two series of copoly(amide‐hydrazide)s, based on different mol % of BABH and bis‐(4‐aminophenyl) ether (ODA) with IPC/TPC were also synthesized. Poly(amide‐hydrazide)s and copoly(amide‐hydrazide)s were characterized by inherent viscosity [η_inh], FTIR, solubility, X‐ray diffraction (XRD), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The polycondensation proceeded smoothly and afforded the polymers with inherent viscosities in the range of 0.18–0.93 dL/g in (NMP + 4% LiCl) at 30°C ± 0.1°C. These polymers dissolved in DMAc, NMP or DMSO containing LiCl. The solubility of copolymers was considerably improved in line with less crystalline nature due to random placement of constituent monomers during the copolymerization. XRD data indicated that poly(amide‐hydrazide)s from BABH alone and IPC/TPC had higher crystallinity than the corresponding copoly(amide‐hydrazide)s derived from a mixture of BABH and bis‐(4‐aminophenyl) ether (ODA). Polymers showed initial weight loss around 160°C which is attributed to the cyclodehydration leading to the formation of corresponding poly(amide‐oxadiazole)s. Copolyamide‐hydrazides showed T_max between 400 and 540°C which is essentially the decomposition of poly(amide‐oxadiazole)s. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Thermal degradation kinetics and lifetime prediction of a luminescent conducting polymer

The thermal stability, degradation kinetics and lifetime‐prediction of a luminescent conducting polymer, poly[2‐methoxy‐5‐(2‐ethylhexyloxy)‐1,4‐phenylenevinylene] (MEH‐PPV), are investigated. The derivative thermogravimetry curves indicate a double‐stage decomposition process in a nitrogen atmosphere, and a multi‐stage decomposition process in an air atmosphere. The apparent activation energy values of MEH‐PPV are higher in nitrogen than in air. Activation energies slightly increase and are then approximately stable in nitrogen for the initial mass loss, while the activation energy changes differently with the percentage mass loss in air. The activation energy decreases for the initial mass loss and increases with mass loss when the mass loss is above 30%; beyond 70% it decreases again. The lifetime of MEH‐PPV decreases dramatically from 10⁶ min to 0.03 min as the temperature increases from 25 °C to 300 °C in air. The lifetime is longer in nitrogen than in air and decreases from 10¹⁴ min to 2.34 min with increasing the temperature from 25 °C to 300 °C in nitrogen. These lifetime parameters indicate that the service/process temperature has a strong influence on the luminescence of MEH‐PPV. The maximum absorption and wavelength at maximum absorption of MEH‐PPV decrease with increasing temperature in the visible region. Copyright © 2003 Society of Chemical Industry     

Preparation and characterization of poly(silyl ester)s containing 2,2‐bis(p‐dimethylsiloxy‐phenyl)propane units in the polymer backbones

The two poly(silyl ester)s containing 2,2‐bis(p‐dimethylsiloxy‐phenyl)propane units in the polymer backbones have been prepared via polycondensation reaction of di‐tert‐butyl adipate and di‐tert‐butyl fumarate with 2,2‐bis(p‐chloro dimethylsiloxy‐phenyl)propane to give tert‐butyl chloride as the condensate. The polymerizations were performed under nitrogen at 110°C for 24 h without addition of solvents and catalysts to obtain the poly(silyl ester)s with weight average molecular weights typically ranging from 5000 to 10,000 g/mol. Characterization of the poly(silyl ester)s included ¹H NMR and ¹³C NMR spectroscopies, infrared spectroscopy, ultraviolet spectroscopy, differential scanning calorimetry, thermogravimetric analysis (TGA), gel permeation chromatography, and Ubbelohde viscometer. The glass transition temperatures (T_g) of the obtained polymers were above zero because of the introducing 2,2‐bis(p‐dimethylsiloxy‐phenyl)propane units in the polymer backbones. The TGA/DTG results showed that the obtained poly(silyl ester)s were stable up to 180°C and the residual weight percent at 800°C were 18 and 9%, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1937–1942, 2006     

Synthesis of Carbon‐Rich Hybrid Foam from GAP‐Modified Polyurethane

4,4′‐Diisocyanato diphenylmethane (MDI)‐based polyurethanes melt and start to burn at 150–200 °C. Mainly H₂O, CO₂, CO, HCN, and N₂ are formed. The new modified polyurethane shows a different pyrolysis behavior. GAP‐diol (glycidyl azide polymer), which was used as a modifying agent, is a well‐known energetic binder with a high burning velocity and a very low adiabatic flame temperature. The modified polyurethane starts to burn at approximately 190 °C because of the emitted burnable gases, but it does not melt. The PU foam shrinks slightly and a black, solid, carbon‐rich hybrid foam remains. TGA and EGA‐FTIR revealed a three‐step decomposition mechanism of pure GAP‐diol, the isocyanate‐GAP‐diol, and PU‐GAP‐diol formulations. The first decomposition step is caused by an exothermic reaction of the azido group of the GAP‐diol. This decomposition reaction is independent of the oxygen content in the atmosphere. In the range of 190–240 °C the azido group spontaneously decomposes to nitrogen and ammonia. This decomposition is assumed to take place partly via the intermediate hydrogen azide that decomposes spontaneously to nitrogen and ammonia in the range of 190–240 °C. The second decomposition step was attributed to the depolymerization of the urethane and bisubstituted urea groups. The third decomposition step in the range of 500–750 °C was attributed to the carbonization process of the polymer backbone, which yielded solid, carbon‐rich hybrid foams at 900 °C. In air, the second and the third decomposition step shifted to lower temperatures while no solid carbon hybrid foam was left. Samples of PU‐GAP‐diol, which were not heated by a temperature program but ignited by a bunsen burner, formed a similar carbon‐rich hybrid foam. It was therefore concluded that the decomposition products of the hydrogen azide, ammonia and mainly nitrogen act as an inert atmosphere. FTIR, solid‐state ¹³C‐NMR, XRD, and heat conductivity measurements revealed a high content of sp²‐hybridized, aromatic structures in the hybrid foam. The carbon‐rich foam shows a considerable hardness coupled with high temperature resistance and large specific surface area of 2.1 m²⋅g⁻¹.     

Thermal degradation of bisphenol A polycarbonate by high-resolution thermogravimetry

Thermal degradation of bisphenol A polycarbonate (PC) has been studied in nitrogen and air from room temperature to 900 °C by high-resolution thermogravimetry (TG) with a variable heating rate in response to changes in the sample's degradation rate. A three-step (in nitrogen) or four-step (in air) degradation process of the PC, which was hardly ever revealed by traditional TG, has been found. The initial thermal degradation temperature of the PC is higher in nitrogen than in air, but the three kinetic parameters (activation energy E, decomposition order n, frequency factor Z) of the major degradation process are slightly lower in nitrogen. The average E, n and lnZ values determined by three methods in nitrogen are 154 KJ mol⁻¹, 0.8 and 21 min⁻¹, respectively, which are almost the same as those calculated by traditional TG measurements. © 1999 Society of Chemical Industry     

Hermetic Thermal Behavior of 3,4‐Diaminofurazan (DAF)

Hermetic thermal behavior of 3,4‐diaminofurazan (DAF) was studied by DSC method with special high‐pressure hermetic crucibles. The complete exothermic decomposition process of DAF can be provided. The extrapolated onset temperature, peak temperature, and enthalpy of decomposition at a heating rate of 10 K min⁻¹ are 238.7 °C, 253.0 °C, and −1986 J g⁻¹, respectively. Self‐accelerating decomposition temperature and critical temperature of thermal explosion of DAF are 232.3 and 253.1 °C, respectively. Specific heat capacity of DAF was determined with a micro DSC method and the molar heat capacity is 140.78 J mol⁻¹ K⁻¹ at 298.15 K. Adiabatic time‐to‐explosion of DAF is about 90 s. The thermal stability of DAF is good.     

Biodegradable polymers based on renewable resources. V. Synthesis and biodegradation behavior of poly(ester amide)s composed of 1,4:3,6‐dianhydro‐D‐glucitol, α‐amino acid,and aliphatic dicarboxylic acid units

A series of poly(ester amide)s were synthesized by solution polycondensations of various combinations of p‐toluenesulfonic acid salts of O,O′‐bis(α‐aminoacyl)‐1,4:3,6‐dianhydro‐D ‐glucitol and bis(p‐nitrophenyl) esters of aliphatic dicarboxylic acids with the methylene chain lengths of 4–10. The p‐toluenesulfonic acid salts were obtained by the reactions of 1,4:3,6‐dianhydro‐D ‐glucitol with alanine, glycine, and glycylglycine, respectively, in the presence of p‐toluenesulfonic acid. The polycondensations were carried out in N‐methylpyrrolidone at 40°C in the presence of triethylamine, giving poly(ester amide)s having number‐average molecular weights up to 3.8 × 10⁴. Their structures were confirmed by FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopy. Most of these poly(ester amide)s are amorphous, except those containing sebacic acid and glycine or glycylglycine units, which are semicrystalline. All these poly(ester amide)s are soluble in a variety of polar solvents such as dimethyl sulfoxide, N,N‐dimethylformamide, 2,2,2‐trifluoroethanol, m‐cresol, pyridine, and trifluoroacetic acid. Soil burial degradation tests, BOD measurements in an activated sludge, and enzymatic degradation tests using Porcine pancreas lipase and papain indicated that these poly(ester amide)s are biodegradable, and that their biodegradability markedly depends on the molecular structure. The poly(ester amide)s were, in general, degraded more slowly than the corresponding polyesters having the same aliphatic dicarboxylic acid units, both in composted soil and in an activated sludge. In the enzymatic degradation, some poly(ester amide)s containing dicarboxylic acid components with shorter methylene chain lengths were degraded more readily than the corresponding polyesters with Porcine pancreas lipase, whereas most of the poly(ester amide)s were degraded more rapidly than the corresponding polyesters with papain. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2721–2734, 2001     

Kinetics of thermal degradation of thermotropic poly(p‐oxybenzoate‐co‐ethylene‐2,6‐naphthalate) by single heating rate methods

The kinetics of thermal degradation of thermotropic liquid crystalline poly(p‐oxybenzoate‐co‐ethylene‐2,6‐naphthalate) (PHB/PEN) with the monomer ratio of 60 : 40 and PEN in nitrogen was studied by dynamic thermogravimetry (TG). The kinetic parameters, including the activation energy E_a, the reaction order n, and the frequency factor ln(Z) of the degradation reaction for PHB/PEN (60 : 40) and PEN were analyzed by the single heating rate methods of Friedman and Chang. The effects of the heating rate and the calculating method on the thermostable and degradation kinetic parameters are systematically discussed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91:3915–3920, 2004