pH‐reversible hydrogels. IV. Swelling behavior of the 2‐hydroxyethyl methacrylate‐co‐acrylic acid‐co‐sodium acrylate copolymeric hydrogels

A series of 2‐hydroxyethyl methacrylate (HEMA) and sodium acrylate (SA50) copolymeric gels were prepared from HEMA and the anionic monomer SA50 with various molar ratios. The influence of SA50 on the copolymeric gels on their swelling behavior in deionized water at different temperatures and various pH buffer solutions was investigated. Results indicated that the poly(2‐hydroxyethyl methacrylate) (PHEMA) hydrogels exhibited an overshooting phenomenon in their dynamic swelling behavior. The maximum overshooting value decreased with increasing of the temperature. The same results were also found in the HEMA/SA50 copolymeric gels with a lower SA50 content. On the contrary, the overshooting phenomenon for HEMA/SA50 copolymeric gels with a higher content of SA50 was exhibited only under higher temperature (over 35°C). These copolymer gels were used to assess drug release and drug delivery in this article. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 1360–1371, 2001     

Thermoreversible hydrogels. VII. Synthesis and swelling behavior of poly(N‐isopropylacrylamide‐co‐3‐methyl‐1‐vinylimidazolium iodide) hydrogels

A series of N‐isopropylacrylamide/3‐methyl‐1‐vinylimidazolium iodide (NIPAAm/MVI) copolymer gels were prepared from the various molar ratios of NIPAAm, cationic monomer MVI, and N,N′‐methylene bisacrylamide (NMBA) in this study. The influence of the amount of MVI in the copolymer gels on the swelling behaviors was investigated in various aqueous saline solutions. Results showed that the swelling ratios (SRs) of copolymer gels were significantly greater than those of NIPAAm homopolymer gels, and the higher the MVI content, the higher the volume phase transition temperature. The SRs for the NIPAAm/MVI copolymer gels decreased with an increase of the salt concentration. In various saline solutions, results showed that the effect of divalent ions on the SR was greater than that of monovalent ions for these hydrogels. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 3242–3253, 1999     

Poly(N‐isopropylacrylamide‐co‐hydroxyethyl methacrylate) graft copolymers and their application as carriers for drug delivery system

Poly(N‐isopropylacrylamide‐co‐hydroxyethyl methacrylate) [P(NIPAM‐co‐HEMA)] copolymer was synthesized by controlled radical polymerization from respective N‐isopropylacrylamide (NIPAM) and hydroxyethyl methacrylate (HEMA) monomers with a predetermined ratio. To prepare the thermosensitive and biodegradable nanoparticles, new thermosensitive graft copolymer, poly(L ‐lactide)‐graft‐poly(N‐isoporylacrylamide‐co‐hydroxyethyl methacrylate) [PLLA‐g‐P(NIPAM‐co‐HEMA)], with the lower critical solution temperature (LCST) near the normal body temperature, was synthesized by ring opening polymerization of L ‐lactide in the presence of P(NIPAM‐co‐HEMA). The amphiphilic property of the graft copolymers was formed by the grafting of the PLLA hydrophobic chains onto the PNIPAM based hydrophilic backbone. Therefore, the graft copolymers can self‐assemble into uniformly spherical micelles ò about 150–240 nm in diameter as observed by the field emission scanning electron microscope and dynamic light scattering. Dexamethasone can be loaded into these nanostructures during dialysis with a relative high loading capacity and its in vitro release depends on temperature. Above the LCST, most of the drugs were released from the drug‐loaded micelles, whereas a large amount of drugs still remains in the micelles after 48 h below the LCST. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Poly(N‐isopropylacrylamide‐co‐sodium acrylate) hydrogels: Interactions with surfactants

Poly(N‐isopropylacrylamide‐co‐sodium acrylate) [poly(NIPAM‐co‐SA)] hydrogels were modified with three different kind of surfactants (cationic, anionic, and nonionic) to study the effect on the swelling properties. The structural variation of the surfactant‐modified hydrogels was investigated in detail. The interaction between the surfactants and the hydrogel varies and strictly depends on the surfactant type. The variation in thermal stability of the modified surfactant hydrogels was investigated and compared with unmodified hydrogel. Further, the hydrogel swelling/diffusion kinetic parameters were investigated and diffusion of water into hydrogel was found to be of the non‐Fickian transport mechanism. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3423–3430, 2007     

Thermoreversible hydrogels X: Synthesis and swelling behavior of the (N‐isopropylacrylamide‐co‐sodium 2‐acrylamido‐2‐methylpropyl sulfonate) copolymeric hydrogels

A series of thermosensitive hydrogels were prepared from various molar ratios of N‐isopropylacrylamide (NIPAAm) and sodium‐2‐acrylamido‐2‐methylpropyl sulfonate (NaAMPS). Factors such as temperature and initial total monomer concentration and different pH solutions were investigated. Results indicated that the more the NaAMPS content in hydrogel system, the higher the swelling ratio and the gel transition temperature; the higher the initial monomer concentration, the lower the swelling ratio. The result also indicated that the NIPAAm/NaAMPS copolymeric hydrogels had different swelling ratios in various pH environments. The present gels showed a pH‐reversible property between pH 3 and pH 10 and thermoreversibility. The swelling ratios of copolymeric gels were lower in a strong alkaline environment because the gels were screened by counterions. Finally, the drug release behavior of these gels was also investigated in this article. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1760–1768, 2000     

Swelling behavior of poly(acrylamide‐co‐N‐vinylimidazole) hydrogels under different environment conditions

A series of random copolymers of acrylamide and N‐vinylimidazole, poly(AAm‐co‐NVI), with various compositions were prepared using redox copolymerization. The influence of environmental conditions such as pH, temperature, and ionic strength on the swelling behavior of the copolymeric hydrogels was investigated. The hydrogels exhibited the highest equilibrium swelling in basic medium at high temperature. Equilibrium swelling decreased with rising ionic strength at pH 5.0. As pH increased, equilibrium swelling of the hydrogels increased at pH 11.0 and I = 0.20 M. Swelling kinetics of the hydrogels was found to be non‐Fickian at 25°C. The process tended to be Fickian at higher pH and temperature. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1783–1788, 2005     

pH–thermoreversible hydrogels. II. Synthesis and swelling behaviors of N-isopropylacrylamide-co-acrylic acid-co-sodium acrylate hydrogels

A series of pH–thermoreversible hydrogels are prepared from the three molar ratios of N-isopropylacrylamide (NIPAAm) and acrylic acid neutralized 50 mol % by sodium hydroxide (SA50) and N,N′-methylene bisacrylamide (NMBA). The influence of the environmental conditions, such as temperature and pH values, on the swelling behavior of these copolymeric gels is also investigated in this article. Results show that the hydrogels bearing negative charges exhibit different equilibrium swelling ratios under various pH media. The pH sensitivities of these gels also strongly depend on the molar ratio of SA50 in the copolymeric gels; thus, the more the SA50 content, the higher the gel pH sensitivity. These hydrogels exhibited thermosensitivity demonstrating a larger change of the equilibrium swelling ratio in aqueous media under temperature changes. An overshooting phenomenon is observed from the gel swelling kinetics under high-temperature conditions. The said hydrogels are also used to investigate the release of model drugs in this study. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 1955–1967, 1999     

New 2‐hydroxyethyl methacrylate resins with good swelling characteristics

2‐Hydroxyethyl methacrylate copolymers with styrene and series of the cross‐linkers (divinylbenzene and mono‐, di‐ and triethylene glycol dimethacrylates) with low cross‐linking degree (2–5 mol %) were obtained by suspension polymerization. Loading capacity of the resins, their glass transition temperature, and swelling characteristics in 20 solvents were analyzed depending on monomers composition. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1487–1493, 2006     

Rheological properties of homogeneous and heterogeneous poly(2‐hydroxyethyl methacrylate) hydrogels

The swelling and rheological behaviour of hydrogels of morphology varying from non‐porous to highly porous was investigated. The hydrogels were prepared by redox free radical copolymerization of 2‐hydroxyethyl methacrylate with 0.1 to 5 mol% of di(ethylene glycol) dimethacrylate in the presence of water varying from 40 to 80 wt%. Various compositions led to clear, turbid or macroporous gels. The morphology of the gels was characterized using optical microscopy and cryoscan electron microscopy. The oscillatory shear and creep of swollen gels revealed that there was a pronounced difference between homogeneous or microheterogeneous and macroporous gels with communicating pores. The achievement of optimum conditions for the correct determination of shear modulus was also analysed. Copyright © 2011 Society of Chemical Industry     

Thermoreversible hydrogels XI: Effect of salt on the swelling properties of the (n‐isopropylacrylamide‐co‐sodium 2‐acrylamido‐2‐methylpropyl sulfonate) copolymeric hydrogels

The swelling behavior for a series of NIPAAm/NaAMPS copolymeric hydrogels with polyelectrolytic and thermosensitive properties was investigated in various saline solutions. The swelling ratios for the present copolymeric hydrogels were affected by the saline solution, which is the result of the neutralization of the cations in the external solution with the negative charges on the polymeric side chains. The adsorption of aniline by the gels increased when the temperature was higher than the gel transition temperature, and this result showed that, when the gels were in hydrophobic state, the hydrophobic organic molecules were more easily adsorbed onto the gels. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1675–1684, 2001     

The structure characterization of thermosensitive poly(N‐isopropylacrylamide‐co‐2‐hydroxypropyl methacrylate) hydrogel

The goal of this work was to investigate a possible way of crosslinking polymer chains and the potential formation of intramolecular hydrogen bonds in thermosensitive poly(N‐isopropylacrylamide‐co‐2‐hydroxypropyl methacrylate) (p(NIPAM‐HPMet)) hydrogels obtained by radical polymerization. The chemical structure of the synthesized hydrogels was investigated by Fourier transform infrared (FTIR) spectroscopy and XRD. The FTIR spectrum confirmed the presence of hydrogen bonds formed between the chains in the copolymer. XRD analysis confirmed the amorphous ? crystalline structure of the copolymer. A three‐glass transition and two melting temperatures were detected by DSC. It was found that the addition of HPMet increased the glass transition and melting temperatures of the p(NIPAM‐HPMet) copolymer. The swelling transport mechanism of p(NIPAM‐HPMet) changed from non‐Fickian at 20 °C to case III or zero‐order time‐independent kinetics characterized by a linear mass uptake with time with increasing temperature at 40 °C. © 2013 Society of Chemical Industry     

Synthesis and swelling properties of 2‐hydroxyethyl methacrylate‐co‐1‐vinyl‐3‐(3‐sulfopropyl)imidazolium betaine hydrogels

A series of 2‐hydroxyethyl methacrylate/1‐vinyl‐3‐(3‐sulfopropyl)imidazolium betaine (HEMA/VSIB) copolymeric gels were prepared from various molar ratios of HEMA and the zwitterionic monomer VSIB. The influence of the amount of VSIB in copolymeric gels on their swelling behavior in water and various saline solutions at different temperatures and the drug‐release behavior, compression strength, and crosslinking density were investigated. Experimental results indicated that the PHEMA hydrogel and the lower VSIB content (3%) in the HEMA/VSIB gel exhibited an overshooting phenomenon in their dynamic swelling behavior, and the overshooting ratio decreased with increase of the temperature. In the equilibrium water content, the value increased with increase of the VSIB content in HEMA/VSIB hydrogels. In the saline solution, the water content for these gels was not affected by the ion concentration when the salt concentration was lower than the minimum salt concentration (MSC) of poly(VSIB). When the salt concentration was higher than the MSC of poly(VSIB), the deswelling behavior of the copolymeric gel was more effectively suppressed as more VSIB was added to the copolymeric gels. However, the swelling behavior of gels in KI, KBr, NaClO₄, and NaNO₃ solutions at a higher concentration would cause an antipolyelectrolyte phenomenon. Besides, the anion effects were larger than were the cation effects in the presence of a common anion (Cl^?) with different cations and a common cation (K⁺) with different anions for the hydrogel. In drug‐release behavior, the addition of VSIB increased the drug‐release ratio and the release rate. Finally, the addition of VSIB in the hydrogel improved the gel strength and crosslinking density of the gel. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2888–2900, 2001     

Environmental responses of poly(N‐isopropylacrylamide‐co‐glycidyl methacrylate derivatized dextran) hydrogels

A series of intelligent hydrogels (poly(NIPA‐co‐GMA‐Dex)) were synthesized by copolymerization of N‐isopropylacrylamide (NIPA) and glycidyl methacrylate derivatized dextran (GMA‐Dex) in aqueous solution with different ratios. Their swelling behaviors at different temperatures and in different pH and ionic strengths, and their mechanical properties were studied. It has found that poly(NIPA‐co‐GMA‐Dex) hydrogels are temperature‐, pH‐, and ionic strength‐sensitive associated with the roles of the component PNIPA and GMA‐Dex, respectively. Most significantly, poly (NIPA‐co‐GMA‐Dex) hydrogels exhibit simultaneously good swelling properties and mechanical properties. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2435–2439, 2005     

Controlled release of aminophylline from poly (N‐isopropylacrylamide‐co‐itaconic acid) hydrogels

N‐Isopropylacrylamide (NIPA) has been copolymerized with itaconic acid (IA) in the presence of N,N‐methylenebisacrylamide (BIS) as crosslinker. The swelling capacity and the release rate of aminophylline at 37 °C are reported. Maximum equilibrium swelling increases as the itaconic acid content in the hydrogel increases. The experimental data suggest clearly that the swelling process obeys second‐order kinetics. According to this, the kinetic constant, k, and the maximum equilibrium swelling, W_∞, have been calculated. Drug release from fully swollen hydrogels follows Fick's law closely, but deviates from it for xerogels. © 2001 Society of Chemical Industry     

Specific interactions in poly(styrene‐co‐2‐hydroxyethyl acrylate)/poly(styrene‐co‐N,N‐dimethylacrylamide) systems

Amphiphilic copolymers of poly(styrene‐co‐2‐hydroxyethyl acrylate) (SHEA) and poly(styrene‐co‐N, N‐dimethylacrylamide) (SAD) of different compositions were prepared by free radical copolymerization and characterized by different techniques. Depending on the nature of the solvent and the densities of interacting species incorporated within the polystyrene matrices, novel materials as blends or interpolymer complexes with properties different from those of their constituents were elaborated when these copolymers are mixed together. The specific interpolymer interactions of hydrogen bonding type and the phase behavior of the elaborated materials were investigated by differential scanning calorimetry (DSC) and Fourier transform infra red spectroscopy (FTIR). The specific interactions of hydrogen bonding type that occurred within the SHEA and within their blends with the SAD were evidenced by FTIR qualitatively by the appearance of a new band at 1626 cm^?1 and quantitatively using appropriate spectral curve fitting in the carbonyl and amide regions. The variation of the glass transition temperature with the blend composition behaved differently with the densities of interacting species. The thermal degradation behavior of the materials was studied by thermogravimetry. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Swelling and hydrolytic degradation behaviour of pH‐responsive hydrogels of poly[(N‐isopropylacrylamide)‐co‐(methacrylic acid)] crosslinked by biodegradable polycaprolactone chains

BACKGROUND: Stimuli‐responsive hydrogels are typically obtained from non‐biodegradable monomers. The use of biodegradable crosslinkers can overcome this limitation. In this context, the main aim of this work was to use modified polycaprolactone as a crosslinker in the preparation of pH‐responsive hydrogels based on N‐isopropylacrylamide and methacrylic acid to give poly[(N‐isopropylacrylamide)‐co‐(methacrylic acid)] (P(N‐iPAAm‐co‐MAA)). RESULTS: Poly(caprolactone) dimethacrylate macromonomer was synthesized and successfully employed as crosslinker with various ratios in the synthesis of well‐known pH‐responsive hydrogels of P(N‐iPAAm‐co‐MAA). The swelling properties of these degradable hydrogels were investigated. They practically do not swell at pH = 2, but exhibit a very high swelling capacity in distilled water and in solutions of pH = 7. In addition, degradation studies at pH = 12 showed that the hydrolysis of the ester groups in the polycaprolactone chains produces, after a relatively short time, the total solubilization of the polymer chains. CONCLUSION: The hydrogels under study have certain characteristics that could make them good candidates for use as matrices in controlled drug delivery. On the one hand, they do not swell in acid pH solution (stomach conditions) but they swell extensively at neutral pH. On the other hand, they became rapidly water soluble following degradation. Copyright © 2009 Society of Chemical Industry     

Thermoreversible hydrogels. XII. Effect of the polymerization conditions on the swelling behavior of the N‐isopropylacrylamide gel

The swelling behavior for the poly(N‐isopropylacrylamide) (NIPAAm) hydrogel prepared in various conditions such as various polymerization media, i.e., deionized water, acetone, and ethanol aqueous solution, and different polymerization temperatures were investigated in this work. The gels were also assessed for suitability in drug‐controlled release. The results indicated that the swelling behavior of the gel was dependent on the polymerization media and temperature, that is, the swelling ratios of gel were related to the pore size and the looser or denser structure of the gel. In addition, the pore size of the gel could be controlled by adjusting the surrounding temperature. Hence, the gel can be used to deliver drugs with different sizes. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 1604–1611, 2000     

Preparation and characterization of 2‐hydroxyethyl methacrylate‐based porous copolymeric particles

2‐Hydroxyethyl methacrylate was copolymerized with three different comonomers, methyl methacrylate (MMA), styrene (St), and N‐vinyl‐2‐pyrrolidone (NVP), respectively, to prepare porous particles crosslinked using ethylene glycol dimethacrylate (EGDMA) in the presence of an organic solvent, 1‐octanol (porogen), by means of suspension copolymerization in an aqueous phase initiated by 2,2‐azobisisobutyronitrile. Nano‐pores were observed in the particles. The pore size and the swelling properties of these particles can be controlled by changing comonomers or adjusting the crosslinker or porogen concentration. A lower crosslinker or porogen concentration favors generating smaller pores, whereas a higher concentration of a hydrophilic comonomer, higher concentration of crosslinker, and higher porogen volume ratio promote the generation of larger pores. In addition, the effects of the porous characteristics on the swelling properties were explored. The swelling capacity of the porous particles is reduced with the increase in the crosslinker concentration; however, there is a critical porogen volume ratio, in which the maximal swelling capacity is reached. Higher porosity in the particles and higher amount of hydrophilic comonomer favor a higher swelling capacity of the particles. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Poly[2-(hydroxyethyl methacrylate)-co-(sulfobetaine)]s hydrogels: 1. Synthesis and swelling behaviors of the 2-(hydroxyethyl methacrylate)-co-2-(vinyl-1-pyridinium propane sulfonate) hydrogels

A series of the 2-hydroxyethyl methacrylate/2-vinyl-l-pyridinium propane sulfonate (HEMA/VPPS) copolymeric gels have been prepared from HEMA and zwitterionic monomer VPPS of various molar ratios. The influence of the amount of VPPS in copolymeric gels on their swelling behavior in water and various saline solutions at different temperatures was investigated. Results indicate that the PHEMA hydrogels exhibit an overshooting phenomenon in their dynamic swelling behavior. The maximum overshooting value decreases with increasing temperature. The same results are also shown for the lower VPPS content HEMA/VPPS copolymeric gels. In the equilibrium swelling ratio, the PHEMA hydrogel exhibits a minimum swelling ratio at 55 °C. Then, the minimum swelling ratio disappears gradually with increasing VPPS content in HEMA/VPPS copolymeric gels. In the saline solution, the swelling ratios of HEMA/VPPS copolymeric gels increase rapidly with increasing salt concentration, for salts with a smaller ratio of charge/radius.     

Bioerodible hydrogels based on 2‐hydroxyethyl methacrylate: Synthesis and characterization

Biocompatible polymers with specific shape and tailored hydrogel properties were obtained by polymerization of mixtures of 2‐hydroxyethyl methacrylate (HEMA) with 1–8 wt % ethylene glycol dimethacrylate (EGDMA) or tetra(ethylene glycol) diacrylate (TEGDA) as crosslinking agents, by using a redox initiator. Introduction of charged positive and negative groups was easily achieved by direct polymerization of appropriate monomer mixtures and by chemical transformation of preformed hydrogels. Investigation of the swelling behavior of the prepared hydrogels evidenced an appreciable dependence on both solvent type and polymer chemical structure. Additionally, the solvation process resulted in being controlled by solvent diffusion, according to a Fickian II mechanism. The presence of several types of water with different melting behavior was observed in fully swollen hydrogels. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2729–2741, 2002