Toughening of epoxy resin using synthesized polyurethane prepolymer based on hydroxyl-terminated polyesters

Epoxy resins are increasingly finding applications in the field of structural engineering. A wide variety of epoxy resins are available, and some of them are characterized by a relatively low toughness. One approach to improve epoxy resin toughness includes the addition of either a rigid phase or a rubbery phase. A more recent approach to toughen brittle polymers is through interpenetrating network (IPN) grafting. It has been found that the mechanical properties of polymer materials with an IPN structure are fairly superior to those of ordinary polymers. Therefore, the present work deals with epoxy resin toughening using a polyurethane (PU) prepolymer as modifier via IPN grafting. For this purpose, a PU prepolymer based on hydroxyl-terminated polyester has been synthesized and used as a modifier at different concentrations. First, the PU-based hydroxyl-terminated polyester has been characterized. Next, an IPN (Epoxy–PU) has been prepared and characterized using Fourier transform infrared (FTIR) spectroscopy, thin-layer chromatography (TLC), and scanning electron microscopy (SEM) prior to mechanical testing in terms of impact strength and toughness. In this study, a Desmophen 1200-based PU prepolymer was used as a modifier at different concentrations within the epoxy resin. The results also showed that, further to the IPN formation, the epoxy and the PU prepolymer reacted chemically (via grafting). Compared to virgin resin, the effect on the mechanical properties was minor. The impact strength varies from 3–9 J/m and K_c from 0.9–1.2 MPa m^1/2. Furthermore, the incorporation of a chain extender with the PU prepolymer as a modifier into the mixture caused a drastic improvement in toughness. The impact strength increases continuously and reaches a maximum value (seven-fold that of virgin resin) at a modifier critical concentration (40 phr). K_c reaches 2.5 MPa m^1/2 compared to 0.9 MPa m^1/2 of the virgin resin. Finally, the SEM analysis results suggested that internal cavitation of the modifier particles followed by localized plastics shear yielding is probably the prevailing toughening mechanism for the epoxy resin considered in the present study. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 70: 2603–2618, 1998     

Effect of resin modifiers on the structural properties of epoxy resins

Thermomechanical, mechanical and fracture mechanical properties of modified epoxy resins with two different modifiers are investigated. Carboxyl‐terminated butadiene‐acrylonitrile (CTBN) is used as toughening agent and hexanediole diglycidyl ether (HDDGE) as reactive diluent. Both modifiers are admixed in contents from 0 up to 100 phr (parts per hundred resin) and exhibit flexibilizing and toughening qualities. The glass transition temperature is strongly depressed by the admixed reactive diluent, whereas the tensile modulus exhibits greater dependency on the toughening agent contents. The tensile strength and strain at break values are higher for the formulations with diluent compared to resins with toughening agent. Up to a content of 45 phr both modified systems exhibit comparable fracture toughness values. Only the toughened systems comprise increasing values for modifier amounts higher than 45 phr. For the formulation with both modifiers (toughening agent and diluent) a significantly higher toughness but a reduced glass transition temperature was obtained. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45348.     

Mechanical properties of an epoxy resin toughened by polyester

The epoxy resins were toughened by 4–24 phr polyester with average molecular weight 1.9×10⁴ g/mol in this investigation. The mechanical properties were examined and dynamic mechanics analyses were performed for the epoxy resins before and after the modification. The toughening mechanism of polyester to epoxy resin is discussed in light of the scanning electronic microscopy observation of the fracture surfaces. The results showed that the impact strength and tensile strength of the modified epoxy resin were remarkably greater than those of the unmodified cured epoxy resin. The most suitable composition for the modified epoxy resin was the addition of 16 phr polyester, which led to 138 and 46% increments in the impact strength and the tensile strength, respectively. And the mechanical properties depended greatly on the congregating state of polyester added. The polyester dispersing in the epoxy matrix was amorphous when its addition was less than or equal to 12 phr, and was sphere crystals when the addition was over 16 phr. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3384–3389, 2003     

Toughening of epoxy resins by hydroxy‐terminated,silicon‐modified polyurethane oligomers

Epoxy resins are among the most versatile engineering structural materials. A wide variety of epoxy resins are commercially available, but most are brittle. Several approaches have been used to improve the toughness of epoxy resins, including the addition of fillers, rubber particles, thermoplastics, and their hybrids, as well as interpenetrating polymer networks (IPNs) of acrylic, polyurethane, and flexibilizers such as polyols. This last approach has not received much attention; none of them have been able to suitably increase resin toughness with out sacrificing tensile properties. Therefore, in an attempt to fill this gap, we experimented with newly synthesized hydroxy‐terminated silicon‐modified polyurethane (SiMPU) oligomers as toughening agents for epoxy resins. SiMPU oligomers were synthesized from dimethyl dichlorosilane, poly(ethylene glycol) (weight‐average molecular weight ～ 200), and toluene 2,4‐diisocyanate and characterized with IR, ¹H‐NMR and ¹³C‐NMR, and gel permeation chromatography. The synthesized SiMPU oligomers, with different concentrations, formed IPNs within the epoxy resins (diglycidyl ether of bisphenol A). The resultant IPN products were cured with diaminodiphenyl sulfone, diaminodiphenyl ether, and a Ciba–Geigy hardener under various curing conditions. Various mechanical properties, including the lap‐shear, peel, and impact strength, were evaluated. The results showed that 15 phr SiMPU led to better impact strength of epoxy resins than the others without the deterioration of the tensile properties. The impact strength increased continuously and reached a maximum value (five times greater than that of the virgin resin) at a critical modifier concentration (20 phr). The critical stress intensity factor reached 3.0 MPa m^1/2 (it was only 0.95 MPa m^1/2 for the virgin resin). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1497–1506, 2003     

Study of ionic polymer toughening epoxy resin

In this study, PEL [copolymer of poly(propylene) oxide (PPO) and poly(ethylene oxide) (PEO)] toughening epoxy resin with ionic charge was used to produce an interpenetrating action between the cross‐linking network structure of the epoxy resin and the PEL additive. Fourier transform infrared (FTIR) analysis of the toughening epoxy resin revealed that ? NCO disappeared at 2400 cm^?1, ? NH appeared at 3300 cm^?1, and ? C?O appeared at 1750 cm^?1. These results indicate that a urethane bond was produced. Dynamic mechanical analysis (DMA) and mechanical testing results indicated that as the level of PEL increased, the compatibility between the epoxy resin and PEL also increased. In addition, the compatibility was improved because the addition of cornate hardener produced a graft phenomenon. The tensile property, impact strength, and fracture toughness of PEL toughening epoxy resin all had a tendency to improve. The tensile strength, impact strength, and fracture toughness (K_IC value) were most improved when 30 phr cornate was added. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3740–3751, 2002     

Mechanical properties of epoxy resin/hydroxyl‐terminated polyester blends: effect of two‐phase structure

In this paper, the effect of two‐phase structure on the mechanism of rubber‐toughening of epoxy resins was studied. Three types of hydroxyl‐terminated polyesters with different molecular weights were synthesized in order to modify epoxy resins to obtain single‐phase (P‐1), critical phase separation (P‐2) and two‐phase (P‐3) structures. The results of dynamical mechanical analysis and scanning electron microscopy distinguished the dissolved and phase‐separated polyesters in the epoxy matrix. The P‐1 system showed the highest dissolved content of polyester in the epoxy matrix, while the P‐3 system exhibited the lowest content. Both dissolved and phase‐separated polyesters proved to be capable of increasing the toughness of modified epoxy resins. The phase‐separated polyester was found to contribute much more to the improvement of toughness. Copyright © 2005 Society of Chemical Industry     

Studies on isotactic poly(phenyl glycidyl ether)‐modified epoxy resins. II. Toughening of epoxy resins

A semicrystalline polymer, isotactic poly(phenyl glycidyl ether) (i‐PPGE) was used as a modifier for epoxy resin; 1,8‐Diamino‐p‐methane (MNDA) and 4,4′‐Diamino diphenyl sulfone (DDS) were used as curing agents. In the MNDA‐cured resins, the dispersed phase were spherical particles with diameters in the range of 0.5–1.0 μm when the resin was blended with 5 phr i‐PPGE. In the DDS‐cured resins, the particle size distribution of the dispersed phase was much wider. The difference was traced back to the reactivity of the curing agent and the different regimes used for curing. Through dynamic mechanical analysis, it was found that in the MNDA‐cured systems, i‐PPGE had a lower crystallinity than in the DDS‐cured system. In spite of the remarkable difference in the morphology and microstructure of the modified resins cured with these two curing agents, the toughening effects of i‐PPGE were similar for these resins. The critical stress intensity factor (K_IC) was increased by 54% and 53%, respectively, for the resins cured by DDS and by MNDA, blending with 5 phr of the toughner. i‐PPGE was comparable with the classical toughners carboxyl‐terminated butadiene‐acrylonitrile copolymers in effectiveness of toughening the epoxy resin. An advantage of i‐PPGE was that the modulus and the glass‐transition temperature of the resin were less affected. However, this modifier caused the flexural strength to decrease somewhat. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1223–1232, 2002; DOI 10.1002/app.10445     

Enhanced fracture toughness of epoxy resins with novel amine‐terminated poly(arylene ether sulfone)–carboxylic‐terminated butadiene‐acrylonitrile–poly(arylene ether sulfone) triblock copolymers

Amine‐terminated poly(arylene ether sulfone)–carboxylic‐terminated butadiene‐acrylonitrile–poly(arylene ether sulfone) (PES‐CTBN‐PES) triblock copolymers with controlled molecular weights of 15,000 (15K) or 20,000 (20K) g/mol were synthesized from amine‐terminated PES oligomer and commercial CTBN rubber (CTBN 1300x13). The copolymers were utilized to modify a diglycidyl ether of bisphenol A epoxy resin by varying the loading from 5 to 40 wt %. The epoxy resins were cured with 4,4′‐diaminodiphenylsulfone and subjected to tests for thermal properties, plane strain fracture toughness (K_IC), flexural properties, and solvent resistance measurements. The fracture surfaces were analyzed with SEM to elucidate the toughening mechanism. The properties of copolymer‐toughened epoxy resins were compared to those of samples modified by PES/CTBN blends, PES oligomer, or CTBN. The PES‐CTBN‐PES copolymer (20K) showed a K_IC of 2.33 MPa m^0.5 at 40 wt % loading while maintaining good flexural properties and chemical resistance. However, the epoxy resin modified with a CTBN/8K PES blend (2:1) exhibited lower K_IC (1.82 MPa m^0.5), lower flexural properties, and poorer thermal properties and solvent resistance compared to the 20K PES‐CTBN‐PES copolymer‐toughened samples. The high fracture toughness with the PES‐CTBN‐PES copolymer is believed to be due to the ductile fracture of the continuous PES‐rich phases, as well as the cavitation of the rubber‐rich phases. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1556–1565, 2002; DOI 10.1002/app.10390     

Synthesis and architecture study of a reactive polybutadiene polyamine as a toughening agent for epoxy resin

In this study, a novel reactive toughener for the epoxy resin was developed and compared with traditional hydroxyl‐terminated polybutadiene (HTPB). For this purpose, the highly reactive aliphatic amine‐terminated polybutadiene (ATPB) was synthesized at ambient conditions by nucleophilic substitution amination. The characterizations of the product were provided by Fourier transform infrared and ¹H NMR spectroscopy. According to the mechanical test results, incorporation of ATPB into epoxy networks can significantly toughen the epoxy matrix. The addition of 10 phr ATPB increased the critical stress intensity factor (K_IC) and critical strain energy release rate (G_IC) of the epoxy from 0.85 to 2.16 MPa m^1/2 and from 0.38 to 3.02 kJ m^?2, respectively. Furthermore, unlike HTPB, the presence of the ATPB did not deteriorate the tensile strength of the matrix. The toughening and failure mechanisms were discussed based on the epoxy network morphological characteristics. The reduction in cross‐linking density and glass transition temperature of the epoxy system upon modification with liquid rubbers was confirmed by dynamic mechanical analysis. This article opens up the possibility of utilizing reactive flexible diamines with polybutadiene backbone as effective toughening agents for thermoset polymers. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44061.     

Novel amphiphilic block copolymer modifiers based on chain‐extended polyester for improved toughness of epoxy resins

Novel amphiphilic block copolymer modifiers based on chain‐extended polyester for improved toughness of epoxy resins were synthesized by attaching polyols having different structures and compatibilities with a dianhydride chain‐extender. Used polyols in this research were polytetrahydrofuran as miscible and hydroxyl‐terminated polybutadiene as immiscible segment. Generated carboxyl groups will be prepolymerized with an excess of epoxy resin to exclusively form epoxy groups between the polyol spacer. Resulting morphologies in the prepared diglycidyl ether of bisphenol‐A‐based epoxy thermosets cured with dicyandiamide and urea were strongly dependent on the initial parameters of the block copolymerization process. Changing the dianhydride concentration as well as relation between miscible and immiscible polyol spacer showed various particle sizes including unimodal and bimodal distributions. The best mechanical performance in terms of fracture toughness (K_1C) could be achieved with bimodal particle size distributions indicating synergistic effects between the different particle sizes in the range of 0.1–7 μm. POLYM. ENG. SCI., 59:E216–E223, 2019. © 2018 Society of Plastics Engineers     

Tertiary-amine-terminated polybutadiene and butadiene acrylonitrile: Synthesis and application in the modification of epoxy resins

Two tertiary-amine-terminated liquid rubbers (TATPB and TATBN) containing polybutadiene and butadiene acrylonitrile are successfully synthesized and used in the modification of epoxy networks. By taking advantage of the flexibility of rubbers, the toughness of epoxy resin has been significantly improved. The addition of 60 phr TATPB and TATBN increased the impact strength of epoxy resins from 12.2 to 59.8 and 92.0 KJ/m², respectively. Meanwhile, due to the dual role of tertiary amine of TATPB and TATBN in catalysis and curing for epoxies, their T_g values shifted from 87.7 to 102.0 and 95.7°C, respectively. TATPB with a smaller polarity improves the toughness of the epoxy resin slightly less than TATBN with a larger polarity, but the former is more effective in increasing the T_g values. This study demonstrates a novel strategy to enhance the toughness of epoxy composites as well as improve the high temperature resistance by designing the end-structure of toughening agents.     

Synthesis and characterization of fluorinated poly(etherimide)s toughening for carbon fiber‐reinforced epoxy composites

Novel‐fluorinated poly(etherimide)s (FPEIs) with controlled molecular weights were synthesized and characterized, which were used to toughen epoxy resins (EP/FPEI) and carbon fiber‐reinforced epoxy composites (CF/EP/FPEI). Experimental results indicated that the FPEIs possessed outstanding solubility, thermal, and mechanical properties. The thermally cured EP/FPEI resin showed obviously improved toughness with impact strength of 21.1 kJ/m² and elongation at break of 4.6%, respectively. The EP/FPEI resin also showed outstanding mechanical strength with tensile strength of 91.5 MPa and flexural strength of 141.5 MPa, respectively. The mechanical moduli and thermal property of epoxy resins were not affected by blending with FPEIs. Furthermore, CF/EP/FPEI composite exhibited significantly improved toughness with Mode I interlaminar fracture toughness (G_IC) of 899.4 J/m² and Mode II interlaminar fracture toughness (G_IIC) of 1017.8 J/m², respectively. Flexural properties and interlaminar shear strength of the composite were slightly increased after toughening. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Graft‐interpenetrating polymer networks of epoxy with polyurethanes derived from poly(ethyleneterephthalate) waste

Polyester polyurethanes derived from poly(ethyleneterephthalate) (PET) glycolysates were blended with epoxy to form graft‐interpenetrating networks (IPNs) with improved mechanical properties. Microwave‐assisted glycolytic depolymerization of PET was performed in the presence of polyethylene glycols of different molecular weights (600–1500). The resultant hydroxyl terminated polyester was used for synthesis of polyurethane prepolymer which was subsequently reacted with epoxy resin to generate grafted structures. The epoxy‐polyurethane blend was cured with triethylene tetramine under ambient conditions to result in graft IPNs. Blending resulted in an improvement in the mechanical properties, the extent of which was found to be dependant both on the amount as well as molecular weight of PET‐based polyurethane employed. Maximum improvement was observed in epoxy blends prepared with polyurethane (PU1000) at a loading of 10% w/w which resulted in 61% increase in tensile strength and 212% increase in impact strength. The extent of toughening was quantified by flexural studies under single edge notch bending (SENB) mode. In comparison to the unmodified epoxy, the Mode I fracture toughness (K_IC) and fracture energy (G_IC) increased by ～45% and ～184%, respectively. The underlying toughening mechanisms were identified by fractographic analysis, which generated evidence of rubber cavitation, microcracking, and crack path deflection. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40490.     

聚氨酯改性环氧树脂胶黏剂的研究与应用进展

简要介绍了环氧树脂胶黏剂的特性,指出聚氨酯改性环氧树脂的主要目的是提高其韧性。分别论述了几种常用的聚氨酯增韧改性环氧树脂胶黏剂的方法,包括端胺基／端羟基／端异氰酸酯基／端环氧基聚氨酯预聚体增韧改性环氧树脂,聚氨酯环氧树脂接枝共聚改性环氧树脂以及聚氨酯互穿聚合物网络增韧环氧树脂,其中详细介绍了聚氨酯互穿聚合物网络增韧环氧树脂技术。同时,对国内聚氨酯改性环氧树脂胶黏剂的主要应用进行了介绍,并指出了我国目前聚氨酯改性环氧树脂胶黏剂的不足和发展方向。     

Toughening of epoxy resin systems using low‐viscosity additives

This study has evaluated three low‐viscosity epoxy additives as potential tougheners for two epoxy resin systems. The systems used were a lower‐reactive resin based upon the diglycidyl ether of bisphenol A (DGEBA) and the amine hardener diethyltoluene diamine, while the second epoxy resin was based upon tetraglycidyl methylene dianiline (TGDDM) and a cycloaliphatic diamine hardener. The additives evaluated as potential tougheners were an epoxy‐terminated aliphatic polyester hyperbranched polymer, a carboxy‐terminated butadiene rubber and an aminopropyl‐terminated siloxane. This work has shown that epoxy‐terminated hyperbranched polyesters can be used effectively to toughen the lower cross‐linked epoxy resins, i.e. the DGEBA‐based systems, with the main advantage being that they have minimal effect upon processing parameters such as viscosity and the gel time, while improving the fracture properties by about 54 % at a level of 15 wt% of additive and little effect upon the T_g. This result was attributed to the phase‐separation process producing a multi‐phase particulate morphology able to initiate particle cavitation with little residual epoxy resin dissolved in the continuous epoxy matrix remaining after cure. The rubber additive was found to impart similar levels of toughness improvement but was achieved with a 10–20 °C decrease in the T_g and a 30 % increase in initial viscosity. The siloxane additive was found not to improve toughness at all for the DGEBA‐based resin system due to the poor dispersion within the epoxy matrix. The TGDDM‐based resin systems were found not to be toughened by any of the additives due to the lack of plastic deformation of the highly cross‐linked epoxy network Copyright © 2003 Society of Chemical Industry     

Toughening of epoxy resin by functional‐terminated polyurethanes and/or semicrystalline polymer powders

Hydroxyl‐, amine‐, and anhydride‐terminated polyurethane (PU) prepolymers, which were synthesized from polyether [poly(tetramethylene glycol)] diol, 4,4′‐diphenylmethane diisocyanate, and a coupling agent, bisphenol‐A (Bis‐A), 4,4′‐diaminodiphenyl sulphone (DDS), or benzophenonetetracarboxylic dianhydride, were used to modify the toughness of Bis‐A diglycidyl ether epoxy resin cured with DDS. Besides the crystalline polymers, poly(butylene terephthalate) (PBT) and poly(hexamethylene adipamide) (nylon 6,6), with particle sizes under 40 μm were employed to further enhance the toughness of PU‐modified epoxy at a low particle content. As shown by the experimental results, the modified resin displayed a significant improvement in fracture energy and also its interfacial shear strength with polyaramid fiber. The hydroxyl‐terminated PU was the most effective among the three prepolymers. The toughening mechanism is discussed based on the morphological and the dynamic mechanical behavior of the modified epoxy resin. Fractography of the specimen observed by the scanning electron microscopy revealed that the modified resin had a two‐phase structure. The fracture properties of PBT‐particle‐filled epoxy were better than those of nylon 6,6‐particle‐filled epoxy. Nevertheless, the toughening effect of these crystalline polymer particles was much less efficient than that of PU modification. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2903–2912, 2001     

Preparation and evaluation of nano‐epoxy composite resins containing electrospun glass nanofibers

In this study, electrospun glass (structurally amorphous SiO₂) nanofibers (EGNFs) with diameters of ～ 400 nm were incorporated into epoxy resin for reinforcement and/or toughening purposes; the effects of silanization treatment (including different functional groups in silane molecules) and mass fraction of EGNFs on strength, stiffness, and toughness of the resulting nano‐epoxy composite resins were investigated. The experimental results revealed that EGNFs substantially outperformed conventional glass fibers (CGFs, with diameters of ～ 10 μm) in both tension and impact tests, and led to the same trend of improvements in strength, stiffness, and toughness at small mass fractions of 0.5 and 1%. The tensile strength, Young's modulus, work of fracture, and impact strength of the nano‐epoxy composite resins with EGNFs were improved by up to 40, 201, 67, and 363%, respectively. In general, the silanized EGNFs with epoxy end groups (G‐EGNFs) showed a higher degree of toughening effect, while the silanized EGNFs with amine end groups (A‐EGNFs) showed a higher degree of reinforcement effect. The study suggested that electrospun glass nanofibers could be used as reinforcement and/or toughening agent for making innovative nano‐epoxy composite resins, which would be further used for the development of high‐performance polymer composites. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Comprehensive Study on Using VTBN Reactive Oligomer for Rubber Toughening of Epoxy Resin and Composite

While vinyl-terminated butadiene acrylonitrile is frequently used for the toughening of vinylester and polyester, very limited research has been conducted on modification of epoxy with this oligomer. Herein, the effect of vinyl-terminated butadiene acrylonitrile addition to epoxy in bulk and glass reinforced composite is systematically investigated. Thermo-physical behavior and mechanical characteristics of the samples are determined. To interpret the test results, the void content of reinforced samples is measured and fracture surface of the specimens is investigated. It is found that vinyl-terminated butadiene acrylonitrile improves the toughness with slight negligible effects on other characteristics. Incorporation of 15 phr of vinyl-terminated butadiene acrylonitrile increases the K_IC of epoxy from 0.6 MPa to 2.3 MPam^0.5. Similarly, addition of 15 phr vinyl-terminated butadiene acrylonitrile leads to 67% enhancement in the interlaminar fracture toughness of composites. The toughening mechanisms and toughness transfer from bulk to composite are discussed.     

Synthesis and evaluation of liquid amine‐terminated polybutadiene rubber and its role in epoxy toughening

Epoxy resin is widely used for coatings, adhesives, castings, electrical insulation materials, and other applications. However, unsolved problems still remain in its applications. The main problem is low toughness: cured epoxy resin is rather brittle, with poor resistance to the propagation of cracks derived from the internal stress generated by shrinkage in the cooling process from cure temperature to room temperature. The objective of this study was to improve the flexibility and toughness of diglycidyl ether of bisphenol A based epoxy resin with a liquid rubber. For this purpose, amine‐terminated polybutadiene (ATPB) was synthesized. The product was characterized by Fourier transform infrared and NMR spectroscopy and elemental analysis. ATPB‐modified epoxy networks were made by curing with an ambient‐temperature curing agent, triethylene tetramine. We varied the epoxy/liquid rubber compositions to study the effect of toughener concentration on the impact and thermal properties. Higher mechanical properties were obtained for epoxy resins toughened with 1 phr ATPB. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2446–2453, 2005     

Mechanical and dielectric properties of epoxy resin modified using reactive liquid rubber (HTPB)

In the present study, hydroxyl‐terminated polybutadiene (HTPB) liquid rubber was employed to modify epoxy resin using 2,4,6‐tri (dimethylaminomethyl) phenol as a catalyst, and methyl hexahydrophthalic anhydride as a curing agent. The reactions between HTPB and epoxy were monitored by Fourier transform infrared (FTIR); the mechanical and dielectric properties of HTPB modified epoxies were evaluated and the morphology was investigated through scanning electronic microscopy (SEM). The FTIR analysis evidenced the occurrence of a chemical reaction between the two components. The mechanical results indicated that the impact strength of HTPB‐modified epoxy was superior to that of the pure epoxy. As the HTPB content increased up to 10 phr the best mechanical performances in terms of tensile and flexural properties were achieved when compared to the unmodified epoxy. Higher concentration of HTPB resulted in larger particles and gave lower mechanical strength values. The incorporation of HTPB into epoxy decreased the dielectric constant and dissipation factor over a wide frequency range from 1 to 10⁶ Hz, and improved the electrical resistivity. SEM micrographs showed that the modified epoxy exhibited a two‐phase morphology where the spherical rubber domains were dispersed in the epoxy matrix. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012