Structure and properties of glasses in the MgSO<Subscript>4</Subscript>-Na<Subscript>2</Subscript>B<Subscript>4</Subscript>O<Subscript>7</Subscript>-KPO<Subscript>3</Subscript> system

A glass formation region has been established in the MgSO₄-Na₂B₄O₇-KPO₃ system. This region is located in the borate-phosphate part of the concentration triangle and occupies ∼40% of the triangle area. Based on the spectral data obtained (nuclear magnetic resonance, IR and Raman spectroscopy), a model is proposed in terms of which the physicochemical properties (such as the linear thermal expansion coefficient, the softening temperature, and the glass transition temperature) of the samples are discussed.     

Preparation and electrochemical properties of spherical LiFePO<Subscript>4</Subscript> and LiFe<Subscript>0.9</Subscript>Mg<Subscript>0.1</Subscript>PO<Subscript>4</Subscript> cathode materials for lithium rechargeable batteries

The spherical LiFePO₄/C and LiFe_0.9Mg_0.1PO₄/C powders were successfully prepared from spherical FePO₄ via a simple uniform-phase precipitation method at normal pressure, using FeCl₃ and H₃PO₄ as the reactants. The FePO₄, LiFePO₄/C, and LiFe_0.9Mg_0.1PO₄/C powders were characterized by scanning electron microscopies (SEM), powder X-ray diffraction (XRD), X-ray photoelectron spectrometer (XPS), and tap-density testing. The uniform spherical particles produced are amorphous, but they were crystallized to FePO₄ after calcining above 400 °C. Due to the homogeneity of the basic FePO₄, the final products, LiFePO₄/C and LiFe_0.9Mg_0.1PO₄/C, are also significantly uniform and the particle size is of about 1 μm in diameter. The tap-density of the spherical LiFePO₄/C and LiFe_0.9Mg_0.1PO₄/C are 1.75 and 1.77 g cm⁻³, respectively, which are remarkably higher than the non-spherical LiFePO₄ powders (the tap-density is 1.0–1.3 g cm⁻³). The excellent specific capacities of 148 and 157 mAh g⁻¹ with a rate of 0.1 C are achieved for the LiFePO₄/C and LiFe_0.9Mg_0.1PO₄/C, respectively. Comparison of the cyclic voltammograms of LiFePO₄/C and LiFe_0.9Mg_0.1PO₄/C shows enhanced redox current and reversibility for the sample substituting Mg on the Fe site. LiFe_0.9Mg_0.1PO₄/C exhibits better high-rate and cycle performances than the un-substituted LiFePO₄/C.     

Separation characteristics of tetrapropylammoniumbromide templating silica/alumina composite membrane in CO<Subscript>2</Subscript>/N<Subscript>2</Subscript>, CO<Subscript>2</Subscript>/H<Subscript>2</Subscript> and CH<Subscript>4</Subscript>/H<Subscript>2</Subscript> systems

Nanoporous silica membrane without any pinholes and cracks was synthesized by organic templating method. The tetrapropylammoniumbromide (TPABr)-templating silica sols were coated on tubular alumina composite support ( γ-Al₂O₃/ α-Al₂O₃ composite) by dip coating and then heat-treated at 550 °C. By using the prepared TPABr templating silica/alumina composite membrane, adsorption and membrane transport experiments were performed on the CO₂/N₂, CO₂/H₂ and CH₄/H₂ systems. Adsorption and permeation by using single gas and binary mixtures were measured in order to examine the transport mechanism in the membrane. In the single gas systems, adsorption characteristics on the α-Al₂O₃ support and nanoporous unsupport (TPABr templating SiO₂/ γ-Al₂O₃ composite layer without α-Al₂O₃ support) were investigated at 20–40 °C conditions and 0.0–1.0 atm pressure range. The experimental adsorption equilibrium was well fitted with Langmuir or/and Langmuir-Freundlich isotherm models. The α-Al₂O₃ support had a little adsorption capacity compared to the unsupport which had relatively larger adsorption capacity for CO₂ and CH₄. While the adsorption rates in the unsupport showed in the order of H₂> CO₂> N₂> CH₄ at low pressure range, the permeate flux in the membrane was in the order of H₂≫N₂> CH₄> CO₂. Separation properties of the unsupport could be confirmed by the separation experiments of adsorbable/non-adsorbable mixed gases, such as CO₂/H₂ and CH₄/H₂ systems. Although light and non-adsorbable molecules, such as H₂, showed the highest permeation in the single gas permeate experiments, heavier and strongly adsorbable molecules, such as CO₂ and CH₄, showed a higher separation factor (CO₂/H₂=5-7, CH₄/H₂=4-9). These results might be caused by the surface diffusion or/and blocking effects of adsorbed molecules in the unsupport. And these results could be explained by surface diffusion. This paper is dedicated to Professor Hyun-Ku Rhee on the occasion of his retirement from Seoul National University.     

Highly ordered mesoporous CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> and CuFe<Subscript>2</Subscript>O<Subscript>4</Subscript> with crystalline walls

The highly ordered mesoporous CoFe₂O₄ and CuFe₂O₄ with crystalline walls can be synthesized by hard template with using mesoporous silica SBA-15 as hard template and using ferric nitrate, cobalt nitrate, and copper nitrate as metal precursors. These new mesoporous materials above have high surface areas, narrow pore size distribution, and large pore volumes, which are believed to be valuable for the potential application in the field of sensors, catalysis, message recording, magnetics, and biology. This work provides a method to fabricate the highly ordered mesoporous materials composed of multi-metal oxides with crystalline walls. The development of such versatile approach is of great significance in practical application. It can be envisaged that this established method is significantly expandable to the controlled synthesis of the mesoporous functional materials with diverse compositions.     

Physicochemical and optical properties of glasses in the Ga<Subscript>4</Subscript>Ge<Subscript>21</Subscript>Se<Subscript>50</Subscript>-Sb<Subscript>2</Subscript>Se<Subscript>3</Subscript> system

This paper reports on the results of an investigation into the concentration behavior of the glass-forming ability, heat resistance, glass transition temperature, density, refractive index, transparent spectral region, and impurity optical absorption of glasses in the Ga₄Ge₂₁Se₅₀-Sb₂Se₃ system. The data obtained indicate that glasses in the Ga₄Ge₂₁Se₅₀-Sb₂Se₃ system with a high Sb₂Se₃ content are of interest as materials for use in fiber optics.     

Electrolytic properties of sulfide-conducting phases based on the BaLn<Subscript>2</Subscript>S<Subscript>4</Subscript> and CaLn<Subscript>2</Subscript>S<Subscript>4</Subscript> compounds of different structural types

The criteria for the choice of objects of investigation that possess sulfide-ion conduction, have the general formula MeLn₂S₄, and crystallize in different structural types are considered. The data obtained on the electrolytic properties of phases based on BaLn₂S₄(Ln = Nd, Sm, Tm); CaFe₂O₄ structural type), CaLn₂S₄(Ln = Y, Yb); Yb₃S₄ structural type), and CaLn₂S₄(Ln = Pr, Nd, Gd); Th₃P₄ structural type) are generalized. The performed comparative analysis of the properties of the synthesized electrolytes has demonstrated that the properties of solid electrolytes depend on the configuration of the f state of lanthanides to a greater extent than on the structure of the electrolytes under investigation. The vacancy mechanism of defects formation and sulfide-ion transfer in phases based on thiolanthanates is proposed reasoning from the data on the dependence of the electrolytic and thermodynamic properties on the composition.     

Li<Subscript>2</Subscript>Cu<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript>/TiO<Subscript>2</Subscript> + SiO<Subscript>2</Subscript>/Ti compositions for the catalytic afterburning of diesel soot

Two methods were used to obtain a catalytically active oxide coating on the surface of titanium for the catalytic afterburning of diesel soot: plasma electrochemical formation of an oxide film on the surface of titanium and extraction pyrolytic deposition of the Li₂Cu₂(MoO₄)₃ compound. The Li₂Cu₂(MoO₄)₃/TiO₂ + SiO₂/Ti compositions synthesized by the single-step extraction pyrolytic treatment of the oxidized surface of titanium ensured a high burning rate of soot of ∼300°C. The subsequent deposition of Li₂Cu₂(MoO₄)₃ lowers the activity of the catalyst, due probably to the growth of molybdate phase crystallites and the filling of open oxide film pores. Double lithium-copper molybdate is able to reduce appreciably the concentration of CO in the oxidation products of soot. The advantages of these methods are the possibility of forming high-cohesion durable coatings on surfaces of any complexity, the simplicity of their implementation, and high productivity and low cost. The obtained results can be recommended for use in developing methods for creating composite coatings on catalytic soot filters.     

Phase Equilibria in the Gd<Subscript>2</Subscript>O<Subscript>3</Subscript>-SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript> System

The phase equilibria are investigated and the phase diagram is constructed for the Gd₂O₃-SrAl₂O₄ pseudobinary join of the Gd₂O₃-SrO-Al₂O₃ ternary oxide system. One ternary compound, namely, Gd₂SrAl₂O₇, is revealed in the Gd₂O₃-SrAl₂O₄ join. It is found that this compound undergoes congruent melting.     

Structure and electrical conductivity of glasses in the Na<Subscript>2</Subscript>O-Na<Subscript>2</Subscript>SO<Subscript>4</Subscript>-P<Subscript>2</Subscript>O<Subscript>5</Subscript> system

The temperature-concentration dependence of the electrical conductivity of glasses in the Na₂SO₄-NaPO₃ and Na₂O-P₂O₅ systems has been investigated. Based on the obtained experimental data (IR spectra, density, microhardness, sound velocity, and paper chromatography), it has been demonstrated that SO₄²⁻ ions form terminal groups through the incorporation into polyphosphate fragments of the structure of glasses in the Na₂SO₄-NaPO₃ system. An increase in the electrical conductivity of glasses in this system by a factor of ∼1000 (as compared to NaPO₃) at 25°C and a decrease in the activation energy for electrical conduction from 1.40 to 1.10 eV have been interpreted from the viewpoint of the decrease in the dissociation energy E _d of polar sulfate phosphate structural chemical fragments formed in the glass bulk upon introduction into sodium metaphosphate Na₂SO₄. This leads to an increase in the number of dissociated sodium ions, which are charge carriers, and to a decrease in the energy (E _a) of their activation shift in the sublattice formed by sulfate phosphate fragments of the structure.     

NiFe<Subscript>2</Subscript>O<Subscript>4</Subscript>@SiO<Subscript>2</Subscript> Nanoparticles Stabilized by Porous Silica Shells

Abstract  

NiFe₂O₄ nanoparticles stabilized by porous silica shells (NiFe₂O₄@SiO₂) were prepared using a one-pot synthesis and characterized for their physical and chemical stability in severe environments, representative of those encountered in industrial catalytic reactors. The SiO₂ shell is porous, allowing transport of gases to and from the metal core. The shell also stabilizes NiFe₂O₄ at the nanoparticle surface: NiFe₂O₄@SiO₂ annealed at temperatures through 973 K displays evidence of surface Ni, as verified by H₂ TPD analyses. At 1,173 K, hematite forms at the surface of the metallic cores of the NiFe₂O₄@SiO₂ nanoparticles and surface Ni is no longer observed. Without the silica shell, however, even mild reduction (at 773 K) can draw Fe to the surface and eliminate surface Ni sites.     

Effect of surface modification of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles on the preparation of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/polystyrene composite particles via miniemulsion polymerization

Fe₃O₄ nanoparticles were modified by n-octadecyltrimethoxysilane (C18TMS) and 3-trimethoxysilylpropylmethacrylate (MPS). The modified Fe₃O₄ nanoparticles were used to prepare Fe₃O₄/polystyrene composite particles by miniemulsion polymerization. The effect of surface modification of Fe₃O₄ on the preparation of Fe₃O₄/polystyrene composite particles was investigated by transmission electron microscopy, Fourier transform infrared spectrophotometer (FT-IR), contact angle, and vibrating sample magnetometer (VSM). It was found that C18TMS modified Fe₃O₄ nanoparticles with high hydrophobic property lead to the negative effect on the preparation of the Fe₃O₄/polystyrene composite particles. The obtained composite particles exhibited asymmetric phase-separated structure and wide size distribution. Furthermore, un-encapsulated Fe₃O₄ were found in composite particles solution. MPS modified Fe₃O₄ nanoparticles showed poor hydrophobic properties and resulted in the obtained Fe₃O₄/polystyrene composite particles with regular morphology and narrow size distribution because the ended C=C of MPS on the surface of Fe₃O₄ nanoparticles could copolymerize with styrene which weakened the phase separation distinctly.     

Photoreduction of CO<Subscript>2</Subscript> into CH<Subscript>4</Subscript> using Bi<Subscript>2</Subscript>S<Subscript>3</Subscript>-TiO<Subscript>2</Subscript> double-layered dense films

Nano-sized bismuth sulfide (Bi₂S₃) and titanium dioxide (TiO₂) with the orthorhombic and anatase tetragonal structures, respectively, were synthesized for application as catalysts for the reduction of carbon dioxide (CO₂) to methane (CH₄). Four double-layered dense films were fabricated with different coating sequences—TiO₂ (bottom layer)/Bi₂S₃ (top layer), Bi₂S₃/TiO₂, TiO₂/Bi₂S₃: TiO₂ (1 : 1) mix, and Bi₂S₃: TiO₂ (1 : 1) mix/Bi₂S₃: TiO₂ (1 : 1) mix—and applied to the photoreduction of CO₂ to CH₄; the catalytic activity of the fabricated films was compared to that of the pure TiO₂/TiO₂ and Bi₂S₃/Bi₂S₃ doubled-layered films. The TiO₂/Bi₂S₃ double-layered film exhibited superior photocatalytic behavior, and higher CH₄ production was obtained with the TiO₂/Bi₂S₃ double-layered film than with the other films. A model of the mechanism underlying the enhanced photoactivity of the TiO₂/Bi₂S₃ double-layered film was proposed, and it was attributed in effective charge separation.     

Crystal structure of the K<Subscript>2</Subscript>(Zn<Subscript>3</Subscript>P<Subscript>4</Subscript>O<Subscript>14</Subscript>) compound

Single crystals of potassium zinc phosphate, namely, K₂(Zn₃P₄O₁₄), are grown by crystallization of a glass of the related compound. The crystal structure of the compound is determined using single-crystal X-ray diffraction.     

Phase equilibria in the LaAlO<Subscript>3</Subscript>-LaSrAlO<Subscript>4</Subscript> system

The phase equilibria are investigated and the phase diagram is constructed for the LaAlO₃-LaSrAlO₄ pseudobinary join of the La₂O₃-SrO-Al₂O₃ ternary oxide system. One ternary compound, namely, La₂SrAl₂O₇, is found in the LaAlO₃-LaSrAlO₄ join. The crystallographic, thermal, and some other physicochemical characteristics of the compounds are reported.Original Russian Text Copyright © 2004 by Fizika i Khimiya Stekla, Popova, Tugova, Zvereva, Gusarov.     

Preparation of Si<Subscript>3</Subscript>N<Subscript>4</Subscript>–ZrO<Subscript>2</Subscript> ceramic composites by self-propagating high-temperature synthesis

Results are provided for a study of Si₃N₄–ZrO₂ composite ceramic material preparation by self-propagating high-temperature synthesis from ferrosilicon and zirconium concentrate. It is noted that as a result of high-temperature dissociation of ZrSiO₄ silicon dioxide is nitrided with formation of silicon oxynitride and it is condensed in surface layers of a specimen in the form of filamentary crystals.     

Synthesis of Heterogeneous Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> Nanostructured Anodes with Long-Term Cycle Stability

The 0D-1D Lithium titanate (Li₄Ti₅O₁₂) heterogeneous nanostructures were synthesized through the solvothermal reaction using lithium hydroxide monohydrate (Li(OH)·H₂O) and protonated trititanate (H₂Ti₃O₇) nanowires as the templates in an ethanol/water mixed solvent with subsequent heat treatment. A scanning electron microscope (SEM) and a high resolution transmission electron microscope (HRTEM) were used to reveal that the Li₄Ti₅O₁₂ powders had 0D-1D heterogeneous nanostructures with nanoparticles (0D) on the surface of wires (1D). The composition of the mixed solvents and the volume ratio of ethanol modulated the primary particle size of the Li₄Ti₅O₁₂ nanoparticles. The Li₄Ti₅O₁₂ heterogeneous nanostructures exhibited good capacity retention of 125 mAh/g after 500 cycles at 1C and a superior high-rate performance of 114 mAh/g at 20C.     

Synthesis of ZnGa<Subscript>2</Subscript>O<Subscript>4</Subscript> Hierarchical Nanostructure by Au Catalysts Induced Thermal Evaporation

In this paper, ZnGa₂O₄ hierarchical nanostructures with comb-like morphology are fabricated by a simple two-step chemical vapor deposition (CVD) method: first, the Ga₂O₃ nanowires were synthesized and employed as templates for the growth of ZnGa₂O₄ nanocombs; then, the as-prepared Ga₂O₃ nanowires were reacted with ZnO vapor to form ZnGa₂O₄ nanocombs. Before the reaction, the Au nanoparticles were deposited on the surfaces of Ga₂O₃ nanowires and used as catalysts to control the teeth growth of ZnGa₂O₄ nanocombs. The as-prepared ZnGa₂O₄ nanocombs were highly crystallized with cubic spinel structure. From the photoluminescence (PL) spectrum, a broad band emission in the visible light region was observed of as-prepared ZnGa₂O₄ nanocombs, which make it promising application as an optical material.     

Effects of La<Subscript>2</Subscript>O<Subscript>3</Subscript> on ZrO<Subscript>2</Subscript> supported Ni catalysts for autothermal reforming of CH<Subscript>4</Subscript>

The effect of La₂O₃ content in Ni-La-Zr catalyst was investigated for the autothermal reforming (ATR) of CH₄. The catalysts were prepared by the coprecipitation method and had a mesoporous structure. Temperature programmed reduction (TPR) and X-ray photoelectron spectroscopy (XPS) indicated that a strong interaction developed between Ni species and the support with the addition of La₂O₃. Thermogravimetric analysis (TGA) and H₂-pulse chemisorption showed that the addition of La₂O₃ led to well dispersed NiO molecules on the support. Ni-La-Zr catalysts gave much higher CH₄ conversion than Ni-Zr catalyst. The Ni-La-Zr containing 3.2 wt% La₂O₃ showed the highest activity. The optimum conditions for maximal CH₄ conversion and H₂ yield were H₂O/CH₄=1.00, O₂/CH₄=0.75. Under these conditions, CH₄ conversion of 83% was achieved at 700 °C. In excess O₂ (O₂/CH₄>0.88), the catalytic activity was decreased due to sintering of the catalyst.     

Combustion and structure formation in the Ti-Ta-C-Ca<Subscript>3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript> system

Biocompatible composites (Ti, Ta)C _x + Ca₃(PO₄)₂ for deposition of nanofilms onto load-bearing implants by ion-plasma sputtering were prepared from Ti + Ta + C + Ca₃(PO₄)₂ mixtures by forced SHS compaction. The effect of Ta + C addition to green mixtures (characterized by parameter z) on the structure/phase formation in combustion products was explored. The addition of tantalum and carbon was found to have little or no influence on the burning velocity U and combustion temperature T _c. Two thermal spikes exhibited by thermograms were associated with the occurrence of two consecutive reactions leading to formation of titanium and tantalum carbides. With increasing z, the grain size of (Ti, Ta)C was found to diminish, its relative density to decrease, while the hardness to markedly grow.      

High-temperature crystal chemistry of α-Na<Subscript>2</Subscript>B<Subscript>4</Subscript>O<Subscript>7</Subscript> and β-NaB<Subscript>3</Subscript>O<Subscript>5</Subscript> layered borates

The thermal expansion of two layered sodium borates is investigated using high-temperature X-ray powder diffraction. It is established that both compounds are characterized by strong anisotropy of thermal expansion due to the hinge mechanism. Special (singular) points are revealed in the temperature dependences of the angular lattice parameters for the α-Na₂B₄O₇ compound. The temperature of manifestation of these singularities corresponds to the glass transition temperature of the melt of the same chemical composition. The assumption is made that the angular lattice parameters (angles between atomic rows) in compounds with a considerable degree of ionic bonding are more sensitive to variations in temperature as compared to the linear lattice parameters (interatomic distances). It is experimentally in situ demonstrated with high-temperature X-ray diffraction that the β-NaB₃O₅ borate is peritectically melted at a temperature of 725 ± 10°C with the formation of the α-Na₂B₈O₁₃ octaborate.