Adsorption-desorption characteristics of phenol and reactive dyes from aqueous solution on mesoporous activated carbon prepared from waste tires

Liquid-phase adsorption-desorption characteristics and ethanol regeneration efficiency of an activated carbon prepared from waste tires and a commercial activated carbon were investigated. Water vapor adsorption experiments reveal that both activated carbons showed hydrophobic surface characteristics. Adsorption experiments reveal that the prepared activated carbon possessed comparable phenol adsorption capacity as the commercial one but clearly larger adsorption capacity of two reactive dyes, Black 5 and Red 31. It was ascertained that the prepared activated carbon exhibited less irreversible adsorption of phenol and the two dyes than its commercial counterpart. Moreover, ethanol regeneration efficiency of the prepared AC saturated with either dye was higher than that of the commercial AC. Because of its superior liquid-phase adsorption-desorption characteristics as well as higher ethanol regeneration efficiency, the prepared activated carbon is more suitable for wastewater treatment, especially for adsorbing similarly bulky adsorbates.     

Electrochemical regeneration of field spent GAC from two water treatment plants

The effectiveness of on-site thermal regeneration of field-spent granular activated carbon (GAC) from two municipal drinking water facilities was compared with bench-scale electrochemical regeneration, a novel regeneration technology. The regeneration method was evaluated using aqueous natural organic material (NOM) adsorption, iodine number analysis, and surface area analysis. In contrast to the large electrochemical regeneration efficiencies reported in the literature for GAC loaded with phenolics and other individual organic compounds, the electrochemical reactor tested was only able to regenerate 8-15% of the NOM adsorption capacity of the field spent GAC. In contrast, thermal reactivation achieved up to 103% regeneration efficiency. To more accurately assess the efficiency of regeneration processes for water treatment applications, GAC should be loaded in continuous-flow columns and not batch rectors. The iodine number analysis yielded higher efficiency values, however it did not give an accurate estimate of the regeneration efficiency. The small changes in GAC pore size distribution were consistent with the low electrochemical regeneration efficiencies. These low efficiencies appear to be related to the low reversibility of NOM adsorption and to pH-induced adsorbate desorption being the primary mechanism for this type of electrochemical regeneration system.     

Solvent regeneration of activated carbon

Nineteen solvents were evaluated in batch tests involving the desorption of a representative organic adsorbate (phenol) from activated carbon. Three of the better solvents which also possess complete miscibility with water (acetone, dimethylformamide, methanol) were tested further in fixed-bed runs. The effects of solvent temperature and solvent flow rate on phenol desorption were evaluated. In addition, the recovery of phenol adsorption capacity by an activated carbon bed operated cyclically using a sequence of phenol adsorption, desorption with methanol, and rinsing with water was determined. It was found that solvent temperature and flow rate are not critical variables. Solvent volume and type were the most important factors in phenol desorption. A modest volume of methanol restored 88% of the fixed-bed adsorption capacity for phenol after 1 regeneration, and the capacity essentially leveled off after 5 regenerations at a value of 81% of the capacity of fresh carbon. Methanol regeneration is effective, easy to perform and offers convenient solvent recovery. Thus, it is an attractive alternative to thermal regeneration methods.     

Regeneration of granular activated carbon with adsorbed trichloroethylene using wet peroxide oxidation

The objective of this study is to clarify the regeneration of granular activated carbon (GAC) adsorbed trichloroethylene (TCE) using wet peroxide oxidation (WPO). TCE and TOC concentrations decreased during WPO, whereas Cl(-) accumulated in water indicating that TCE was not only decomposed but was also mineralized to Cl(-) and CO(2) using WPO. Regeneration efficiencies (q/q(0)) of GAC regenerated at 150, 165 and 180 degrees C (initial pH 4) were 0.36, 0.45, 0.48, respectively. In addition, regeneration efficiencies of GAC regenerated in the solution of various initial pH (2.5, 3.0, 4.0) at 180 degrees C were 0.71, 0.60, 0.48, respectively. These results suggest that regeneration of GAC is more effective at higher reaction temperature and lower initial pH of the solution. In the repeated regeneration of GAC, the adsorption capacity of GAC for TCE gradually decreased and regeneration efficiency of the regenerated GAC at sixth step was 0.40. The adsorption capacity loss of regenerated GAC is probably due to oxidation of GAC during WPO.     

Comparison between thermal and ozone regenerations of spent activated carbon exhausted with phenol

Thermal and ozone regenerations of granular activated carbons (GAC) used in the removal of phenol from aqueous solution have been studied. The phenol isotherms for virgin GAC could be well represented by the Langmuir equation. Direct ozonation of GAC introduced large amounts of acidic surface oxygen groups, which caused a decrease in the phenol uptake. Thermogravimetric methods were used to investigate the mechanism of phenol adsorption onto virgin and ozonated carbons. Thermal regeneration was carried out at 1123K using nitrogen (pyrolysis alone) or nitrogen and carbon dioxide (pyrolysis plus oxidation). Results showed that spent carbons do not recover their adsorption characteristics when heated under inert conditions whereas carbon dioxide regeneration was effective at about 15% wt burn-off. Regeneration of GAC was also carried out with ozone as oxidizing gas at room temperature. Ozone dose and the nature of GAC have much influence on the regeneration performance. For an individual GAC there exits an optimum ozone dose for which phenol is eliminated together with most of its oxidation by-products without incurring in carbon surface chemical alterations. However, if excessive ozone is applied some acidic surface groups are formed on the GAC, thereby decreasing the adsorption capacity for phenol. Results showed that spent carbons can recover most of their adsorption characteristics and specific surface areas when regenerated through a number of adsorption-ozone regeneration cycles.     

粉末活性炭去除水中氯丁二烯的研究

试验研究了粉末活性炭对氯丁二烯的去除效果以及吸附时间、投加量和水质对粉末活性炭吸附性能的影响。结果表明,粉末活性炭对氯丁二烯的去除率在90%以上,吸附规律符合Langmuir吸附等温线和Freunlich吸附等温线;最佳吸附时间为120min;随着投炭量的增加,氯丁二烯的去除率提高,粉末活性炭的吸附容量降低;在不同水质条件下,粉末活性炭的吸附等温线不同,因此在应急处理中,首先应确定原水水质下的吸附等温线,然后计算出投炭量。     

Ag-doped carbon aerogels for removing halide ions in water treatment

The objective of this study was to analyze the efficiency of silver(Ag)-doped carbon aerogels for the removal of bromide (Br(-)) and iodide (I(-)) from drinking waters. Textural characterization of Ag-doped aerogels showed that an increase in the Ag dose added during the preparation process produced: (i) a reduction in the surface area (S(BET)) and (ii) an increase in mesopore (V(2)) and macropore (V(3)) volumes. Chemical characterization of the materials revealed an acidic surface (pH of point of zero charge, pH(PZC)=4.5, O(surface)=20%). The oxidation state of Ag was +1 and the surface concentration of this element ranged from 4% to 10%. The adsorption capacity (X(m)) and affinity of adsorbent (BX(m)) increased with a reduction in the radius of the halogenide. Furthermore, an increase in the adsorption capacity was observed with higher Ag concentrations on the aerogel surface. The high adsorption capacity of the aerogel may be due to the presence of Ag(I) on its surface, with the formation of the corresponding Ag halides. Our observations indicate that the halogenides adsorption on commercial activated carbon (Sorbo-Norit) is much lower than that of the Ag-doped carbon aerogels. The presence of chloride and natural organic matter (NOM) in the medium reduced the adsorption capacity of Br(-) and I(-) on Ag carbon aerogels.     

Microwave-assisted regeneration of activated carbons loaded with pharmaceuticals

The purpose of this work was to explore the application of microwaves for the regeneration of activated carbons spent with salicylic acid, a metabolite of a common analgesic frequently found in wastewater from the pharmaceutical industry. The exhausted carbon was treated in a quartz reactor by microwave irradiation at 2450 MHz at different temperatures and atmospheres, the regeneration efficiency being highly dependent on the operating conditions. Quantitative desorption of the pollutant was achieved at high temperature and oxidizing atmosphere, with regeneration efficiencies as high as 99% after six cycles. The stripping efficiency was superior to 95% at high temperatures and decreased at 450 degrees C. The incomplete desorption of the adsorbate at low temperature was further confirmed by the changes in the porosity observed by N2 and CO2 adsorption isotherms. Hence, micropores remain blocked which results in a reduction in loading capacities in successive cycles.     

Experimental study on adsorption capacity of an activated carbon-based adsorption water chiller

The objective of this study was to evaluate the adsorption capacity of a working pair for an adsorption water chiller. Activated carbon fibre–methanol, activated carbon fibre–ethanol and activated carbon pallet–ethanol were used as an adsorbent–adsorbate pair in this study. The experiment was conducted using a stainless steel adsorber, 110?mm diameter by 150?mm height, filled with adsorbent and transparent plastic evaporator, 100?ml capacity, filled with adsorbate. The experiment was performed by isobaric adsorption in the temperature range of 10–100°C at the evaporator temperature of 20°C (water chiller). An experimental investigation showed that the activated carbon fibre–methanol pair has the highest adsorption capacity (0.44?kg/kg) compared to the activated carbon fibre–ethanol and activated carbon pallet–ethanol pairs. The finding revealed that uniform structure and large surface area of adsorbent as well as low boiling point and large latent heat of adsorbate had highly significant effects on adsorption capacity. The effect of time and adsorber temperature on adsorption capacity is also discussed in this study.     

The regeneration of field-spent granular-activated carbons.

The thermal regeneration of field-spent granular-activated carbons (GAC) is being increasingly adopted as a cost-effective alternative to disposal. The success of this practice requires the adjustment of process conditions to maximise the recovery of the original carbon characteristics while minimising carbon loss. This paper describes an investigation into the regeneration of several field-spent GAC representative of those typically generated by the drinking water treatment industry. The carbons were initially investigated for their ash contents and inorganic compositions in order to determine the accumulation of metallic species that affect the regeneration process. Regeneration was conducted in steam at 800 degrees C over reaction times between 0 and 60 min in order to achieve different degrees of carbon gasification. Weight losses were determined for each condition and the resulting carbons characterised for their apparent density, porosity, surface area and aqueous adsorption characteristics. Results showed that spent carbons recovered most of their adsorption characteristics when heated to 800 degrees C under inert conditions. Steam gasification in the range of 5-10 wt% burn-off had some positive effects on the characteristics of the spent carbons which were in most cases counteracted by a reduction in the carbon yield. Steam gasification in excess of 15 wt% burn-off caused a rapid increase in the carbon mesoporosity but a significant deterioration in the carbon microporosity, BET surface area and adsorption capacity for organic species of small molecular size.     

Characteristics of competitive adsorption between 2-methylisoborneol and natural organic matter on superfine and conventionally sized powdered activated carbons

When treating water with activated carbon, natural organic matter (NOM) is not only a target for adsorptive removal but also an inhibitory substance that reduces the removal efficiency of trace compounds, such as 2-methylisoborneol (MIB), through adsorption competition. Recently, superfine (submicron-sized) activated carbon (SPAC) was developed by wet-milling commercially available powdered activated carbon (PAC) to a smaller particle size. It was reported that SPAC has a larger NOM adsorption capacity than PAC because NOM mainly adsorbs close to the external adsorbent particle surface (shell adsorption mechanism). Thus, SPAC with its larger specific external surface area can adsorb more NOM than PAC. The effect of higher NOM uptake on the adsorptive removal of MIB has, however, not been investigated. Results of this study show that adsorption competition between NOM and MIB did not increase when NOM uptake increased due to carbon size reduction; i.e., the increased NOM uptake by SPAC did not result in a decrease in MIB adsorption capacity beyond that obtained as a result of NOM adsorption by PAC. A simple estimation method for determining the adsorbed amount of competing NOM (NOM that reduces MIB adsorption) is presented based on the simplified equivalent background compound (EBC) method. Furthermore, the mechanism of adsorption competition is discussed based on results obtained with the simplified EBC method and the shell adsorption mechanism. Competing NOM, which likely comprises a small portion of NOM, adsorbs in internal pores of activated carbon particles as MIB does, thereby reducing the MIB adsorption capacity to a similar extent regardless of adsorbent particle size. SPAC application can be advantageous because enhanced NOM removal does not translate into less effective removal of MIB. Molecular size distribution data of NOM suggest that the competing NOM has a molecular weight similar to that of the target compound.     

粉末活性炭吸附水中四氯化碳试验研究

采用粉末活性炭吸附去除水中四氯化碳,考察了活性炭投加量、吸附时间、温度等因素对去除效果的影响.结果表明,该吸附过程符合Freundlich吸附等温线模式,以物理吸附为主,并且在纯水中的吸附容量大于原水;在15-25℃內,温度对吸附效果的影响不大,但去除率随吸附时间的延长而升高;投加80 mg/L粉末活性炭吸附120 m...     

Preliminary feasibility study for the use of an adsorption/bio-regeneration system for molinate removal from effluents

This work studies the feasibility of the use of a combined physical-biological remediation procedure for treatment of effluents contaminated with molinate, where the herbicide is removed through adsorption and biodegraded in a subsequent stage, with the regeneration of the adsorbent. In order to select the most adequate absorbent for molinate, different materials were tested, namely pine bark, activated carbon and resin Amberlite XAD-4. Activated carbon and resin Amberlite XAD-4 were the most efficient on the removal of molinate from solutions, although the activated carbon used proved not to be bio-regenerable. It was also observed that factors such as temperature, pH, and conductivity did not affect significantly molinate adsorption onto resin Amberlite XAD-4. Resin Amberlite XAD-4 was successfully bio-regenerated, being observed that biodegradation was mainly dependent on spontaneous desorption of the molinate. After bio-regeneration, the resin could be re-utilised as adsorbent.     

An in‐situ thermally regenerated air purifier for indoor formaldehyde removal

Formaldehyde is a common indoor pollutant that is an irritant and has been classified as carcinogen to humans. Adsorption technology is safe and stable and removes formaldehyde efficiently, but its short life span and low adsorption capacity limit its indoor application. To overcome these limitations, we propose an in‐situ thermally regenerated air purifier (TRAP) which self‐regenerates as needed. This purifier has four working modes: cleaning mode, regeneration mode, exhaust mode, and outdoor air in‐take mode, all of which are operated by valve switching. We developed a real‐scale TRAP prototype with activated carbon as adsorbent. The experimental testing showed that the regeneration ratios for formaldehyde of TRAP were greater than 90% during 5 cycles of adsorption‐regeneration and that through the 5 cycles, there was no damage to the adsorption material as confirmed by scanning electron microscope (SEM) and Brunauer‐Emmett‐Teller (BET) tests. The total energy consumption by the prototype for purifying 1000 m³ indoor air was 0.26 kWh. This in‐situ thermal‐regeneration method can recover the purifier's adsorption ability through at least five cycles.     

改性炭对磺胺甲噁唑的吸附及解吸特性

采用商品活性炭和金属氧化物改性炭作为吸附剂,研究了几种活性炭对磺胺甲噁唑(SMZ)的吸附及解吸特性。结果表明:SMZ在几种活性炭上的吸附动力学符合拟二级动力学方程;SMZ的吸附均可采用Freundlich、Langmuir和Langmuir-Freundlich模型进行拟合,Langmuir-Freundlich吸附模型能更好地描述活性炭和改性炭对SMZ的吸附行为;铁、锰氧化物的存在对活性炭的比表面或者孔结构影响不大,并且其对活性炭吸附水中SMZ的性能影响甚微;与AC-Fe和AC-Mn相比,AC-0上吸附的SMZ更易解吸,改性炭负载的金属氧化物与SMZ的表面络合作用增强了AC-Fe和AC-Mn对SMZ的化学吸附,并且改性炭的MnOx和FeOx能氧化降解部分SMZ。     

Fast and highly efficient removal of dyes under alkaline conditions using magnetic chitosan-Fe(III) hydrogel

The dyeing effluent of high alkalinity, which could not be treated efficiently by traditional wastewater technologies, highlighted the need to explore a technically feasible, highly efficient and cost effective method. Thus, a fast and highly efficient method for the removal of dyes under alkaline conditions using magnetic chitosan-Fe(III) hydrogel was proposed. Firstly, chitosan-Fe(III) hydrogel was prepared by a chelation procedure with cheap and environmentally friendly chitosan and iron salts. We characterized the sorption and desorption of C. I. Acid Red 73, a common type of anionic dye, on magnetic chitosan-Fe(III) hydrogel, to understand its availability for alkaline dyeing wastewater. Sorption of dye to chitosan-Fe(III) hydrogel was fast (adsorption could reach equilibrium in less than 10 min) in a wide pH range, and agreed well to the Langmuir-Freundlich adsorption model with a high maximum adsorption capacity of 294.5 mg/g under pH = 12. Meanwhile, 1 mol/L NaOH was used to desorb the dye efficiently (desorption efficiency 94.4%) and 0.1 mol/L HCl was applied to regenerate the chitosan-Fe(III) hydrogel. The results showed that the chitosan-Fe(III) hydrogel could retain its high efficiency after the desorption and regeneration. The common coexisting ions almost had no negative effect on the dye adsorption of chitosan-Fe(III) and the removals of a variety of anionic dyes suggest that the magnetic chitosan-Fe(III) hydrogel could efficiently adsorb both the acid and reactive dyes under alkaline condition. Overall, the results reported herein indicated that magnetic chtisoan-Fe(III) with high adsorption efficiency and strong magnetic property is very attractive and implies a potential of practical application for alkaline dyeing effluent treatment.     

Fenton-driven chemical regeneration of MTBE-spent GAC

Methyl tert-butyl ether (MTBE)-spent granular activated carbon (GAC) was chemically regenerated utilizing the Fenton mechanism. Two successive GAC regeneration cycles were performed involving iterative adsorption and oxidation processes: MTBE was adsorbed to the GAC, oxidized, re-adsorbed, oxidized, and finally re-adsorbed. Oxidant solutions comprised of hydrogen peroxide (H2O2) (1.7-2.0%) and FeSO4 x 7H2O (3 g/L) (pH 2.5), were recirculated through the GAC column (30% bed expansion). The regeneration efficiency after two full cycles of treatment was calculated to be 91%. The cost of H2O2 was 0.59 dollars/kg GAC (0.27 dollars/lb) per regeneration cycle. There was no loss of sorptive capacity. Small reductions in carbon surface area and pore volume were measured. The lack of carbon deterioration under aggressive oxidative conditions was attributed to the oxidation of the target contaminants relative to the oxidation of carbon surfaces. The reaction byproducts from MTBE oxidation, tertiary butanol and acetone, were also degraded and did not accumulate significantly on the GAC. Excessive accumulation of Fe on the GAC and consequent interference with MTBE sorption and carbon regeneration was controlled by monitoring and adjusting Fe in the oxidative solution.     

Regeneration of acid orange 7-exhausted granular activated carbons with microwave irradiation

An investigation was performed for the regeneration of three granular activated carbons (GACs) exhausted with acid orange 7 (AO7). The three GACs were made from different materials, i.e. coconut shells, almond nucleus and coal. The AO7 adsorption process was carried out in a continuous-flow adsorption column. After adsorption, the AO7-saturated GAC was dried at 120 °C, then regenerated in a quartz reactor by 2450 MHz microwave (MW) irradiation at 850 W for 5 min. The efficacy of this procedure was analyzed by determining the rates and amounts of AO7 adsorbed in successive adsorption–MW regeneration cycles. Effects of this regeneration on the structural properties, surface chemistry and the AO7 adsorption capacities of GAC samples were examined. It was found that after several adsorption–MW regeneration cycles, the adsorption rates and capacities of GACs could maintain relatively high levels, even higher than those of virgin GACs, as indicated by AO7 breakthrough curves and adsorption isotherms. The improvement of GAC adsorption properties resulted from the modification of pore size distribution and surface chemistry by MW irradiation.     

Performance of a CO2 sorbent for indoor air cleaning applications: Effects of environmental conditions,sorbent aging,and adsorption of co-occurring formaldehyde

Indoor air cleaning systems that incorporate CO₂ sorbent materials enable HVAC load shifting and efficiency improvements. This study developed a bench-scale experimental system to evaluate the performance of a sorbent under controlled operation conditions. A thermostatic holder containing 3.15 g sorbent was connected to a manifold that delivered CO₂-enriched air at a known temperature and relative humidity (RH). The air stream was also enriched with 0.8-2.1 ppm formaldehyde. The CO₂ concentration was monitored in real-time upstream and downstream of the sorbent, and integrated formaldehyde samples were collected at different times using DNPH-coated silica cartridges. Sorbent regeneration was carried out by circulating clean air in countercurrent. Almost 200 loading/regeneration cycles were performed in the span of 17 months, from which 104 were carried out at reference test conditions defined by loading with air at 25°C, 38% RH, and 1000 ppm CO₂, and regenerating with air at 80°C, 3% RH and 400 ppm CO₂. The working capacity decreased slightly from 43-44 mg CO₂ per g sorbent to 39-40 mg per g over the 17 months. The capacity increased with lower loading temperature (in the range 15-35°C) and higher regeneration temperature, between 40 and 80°C. The CO₂ capacity was not sensitive to the moisture content in the range 6-9 g/m³, and decreased slightly when dry air was used. Loading isothermal breakthrough curves were fitted to three simple adsorption models, verifying that pseudo-first-order kinetics appropriately describes the adsorption process. The model predicted that equilibrium capacities decreased with increasing temperature from 15 to 35°C, while adsorption rate constants slightly increased. The formaldehyde adsorption efficiency was 80%-99% in different cycles, corresponding to an average capacity of 86 ± 36 µg/g. Formaldehyde was not quantitatively released during regeneration, but its accumulation on the sorbent did not affect CO₂ adsorption.