Broad Spectrum Anti-Bacterial Activity and Non-Selective Toxicity of Gum Arabic Silver Nanoparticles

Silver nanoparticles (AgNPs) are the most commercialized nanomaterials and presumed to be biocompatible based on the biological effects of the bulk material. However, their physico-chemical properties differ significantly to the bulk materials and are associated with unique biological properties. The study investigated the antimicrobial and cytotoxicity effects of AgNPs synthesized using gum arabic (GA), sodium borohydride (NaBH₄), and their combination as reducing agents. The AgNPs were characterized using ultraviolet-visible spectrophotometry (UV-Vis), dynamic light scattering (DLS), transmission electron microscopy (TEM), and Fourier-transform infrared spectroscopy (FT-IR). The anti-bacterial activity was assessed using agar well diffusion and microdilution assays, and the cytotoxicity effects on Caco-2, HT-29 and KMST-6 cells using MTT assay. The GA-synthesized AgNPs (GA-AgNPs) demonstrated higher bactericidal activity against all bacteria, and non-selective cytotoxicity towards normal and cancer cells. AgNPs reduced by NaBH₄ (C-AgNPs) and the combination of GA and NaBH₄ (GAC-AgNPs) had insignificant anti-bacterial activity and cytotoxicity at ≥50 µg/mL. The study showed that despite the notion that AgNPs are safe and biocompatible, their toxicity cannot be overruled and that their toxicity can be channeled by using biocompatible polymers, thereby providing a therapeutic window at concentrations that are least harmful to mammalian cells but toxic to bacteria.     

In vivo synthesis of nanomaterials in plants: location of silver nanoparticles and plant metabolism

Metallic nanoparticles (MeNPs) can be formed in living plants by reduction of the metal ions absorbed as soluble salts. It is very likely that plant metabolism has an important role in MeNP biosynthesis. The in vivo formation of silver nanoparticles (AgNPs) was observed in Brassica juncea, Festuca rubra and Medicago sativa. Plants were grown in Hoagland''s solution for 30 days and then exposed for 24 h to a solution of 1,000 ppm AgNO₃. In the leaf extracts of control plants, the concentrations of glucose, fructose, ascorbic acid, citric acid and total polyphenols were determined. Total Ag content in plant fractions was determined by inductively coupled plasma atomic emission spectroscopy. Despite the short exposure time, the Ag uptake and translocation to plant leaves was very high, reaching 6,156 and 2,459 mg kg⁻¹ in B. juncea and F. rubra, respectively. Ultrastructural analysis was performed by transmission electron microscopy (TEM), and AgNPs were detected by TEM X-ray microanalysis. TEM images of plant fractions showed the in vivo formation of AgNPs in the roots, stems and leaves of the plants. In the roots, AgNPs were present in the cortical parenchymal cells, on the cell wall of the xylem vessels and in regions corresponding to the pits. In leaf tissues, AgNPs of different sizes and shapes were located close to the cell wall, as well as in the cytoplasm and within chloroplasts. AgNPs were not observed in the phloem of the three plant species. This is the first report of AgNP synthesis in living plants of F. rubra. The contents of reducing sugars and antioxidant compounds, proposed as being involved in the biosynthesis of AgNPs, were quite different between the species, thus suggesting that it is unlikely that a single substance is responsible for this process.

MSC 2010

92 Biology and other natural sciences; 92Cxx Physiological, cellular and medical topics; 92C80 Plant biology     

Fabrication of cubic PtCu nanocages and their enhanced electrocatalytic activity towards hydrogen peroxide

Cubic PtCu nanocages (NCs) were successfully synthesized through a redox reaction using cuprous oxide (Cu₂O) as a sacrificial template and reducing agent. The porous PtCu NCs were composed of amounts of PtCu nanograins with an average particle size of 2.9 nm. The electrocatalytic performance of the PtCu NC electrode towards H₂O₂ was studied by cyclic voltammetry (CV) and chronoamperometry. The prepared PtCu NC electrode exhibited excellent electrocatalytic activity towards H₂O₂, with a wide liner range from 5 μM to 22.25 mM, a relatively high sensitivity of 295.3 μA mM^-1 cm^-2, and a low detection limit of 5 μM (S/N = 3). The hollow porous nanostructure has potential applications in biosensors.     

Study on antibacterial activity of silver nanoparticles synthesized by gamma irradiation method using different stabilizers

Colloidal solutions of silver nanoparticles (AgNPs) were synthesized by gamma Co-60 irradiation using different stabilizers, namely polyvinyl pyrrolidone (PVP), polyvinyl alcohol (PVA), alginate, and sericin. The particle size measured from TEM images was 4.3, 6.1, 7.6, and 10.2 nm for AgNPs/PVP, AgNPs/PVA, AgNPs/alginate, and AgNPs/sericin, respectively. The influence of different stabilizers on the antibacterial activity of AgNPs was investigated. Results showed that AgNPs/alginate exhibited the highest antibacterial activity against Escherichia coli (E. coli) among the as-synthesized AgNPs. Handwash solution has been prepared using Na lauryl sulfate as surfactant, hydroxyethyl cellulose as binder, and 15 mg/L of AgNPs/alginate as antimicrobial agent. The obtained results on the antibacterial test of handwash for the dilution to 3 mg AgNPs/L showed that the antibacterial efficiency against E. coli was of 74.6%, 89.8%, and 99.0% for the contacted time of 1, 3, and 5 min, respectively. Thus, due to the biocompatibility of alginate extracted from seaweed and highly antimicrobial activity of AgNPs synthesized by gamma Co-60 irradiation, AgNPs/alginate is promising to use as an antimicrobial agent in biomedicine, cosmetic, and in other fields.     

Particle Size Modulates Silver Nanoparticle Toxicity during Embryogenesis of Urchins Arbacia lixula and Paracentrotus lividus

Silver nanoparticles represent a threat to biota and have been shown to cause harm through a number of mechanisms, using a wide range of bioassay endpoints. While nanoparticle concentration has been primarily considered, comparison of studies that have used differently sized nanoparticles indicate that nanoparticle diameter may be an important factor that impacts negative outcomes. In considering this, the aim of the present study was to determine if different sizes of silver nanoparticles (AgNPs; 10, 20, 40, 60 and 100 nm) give rise to similar effects during embryogenesis of Mediterranean sea urchins Arbacia lixula and Paracentrotus lividus, or if nanoparticle size is a parameter that can modulate embryotoxicity and spermiotoxicity in these species. Fertilised embryos were exposed to a range of AgNP concentrations (1–1000 µg L⁻¹) and after 48 h larvae were scored. Embryos exposed to 1 and 10 µg L⁻¹ AgNPs (for all tested sizes) showed no negative effect in both sea urchins. The smaller AgNPs (size 10 and 20 nm) caused a decrease in the percentage of normally developed A. lixula larvae at concentrations ≥50 µg L⁻¹ (EC₅₀: 49 and 75 μg L⁻¹, respectively) and at ≥100 µg L⁻¹ (EC₅₀: 67 and 91 μg L⁻¹, respectively) for P. lividus. AgNPs of 40 nm diameter was less harmful in both species ((EC₅₀: 322 and 486 μg L⁻¹, for P. lividus and A. lixula, respectively)). The largest AgNPs (60 and 100 nm) showed a dose-dependent response, with little effect at lower concentrations, while more than 50% of larvae were developmentally delayed at the highest tested concentrations of 500 and 1000 µg L⁻¹ (EC₅₀(100 nm); 662 and 529 μg L⁻¹, for P. lividus and A. lixula, respectively. While AgNPs showed no effect on the fertilisation success of treated sperm, an increase in offspring developmental defects and arrested development was observed in A. lixula larvae for 10 nm AgNPs at concentrations ≥50 μg L⁻¹, and for 20 and 40 nm AgNPs at concentrations >100 μg L⁻¹. Overall, toxicity was mostly ascribed to more rapid oxidative dissolution of smaller nanoparticles, although, in cases, Ag⁺ ion concentrations alone could not explain high toxicity, indicating a nanoparticle-size effect.     

Ecofriendly Synthesis of Silver Nanoparticles by Terrabacter humi sp. nov. and Their Antibacterial Application against Antibiotic-Resistant Pathogens

It is essential to develop and discover alternative eco-friendly antibacterial agents due to the emergence of multi-drug-resistant microorganisms. In this study, we isolated and characterized a novel bacterium named Terrabacter humi MAHUQ-38^T, utilized for the eco-friendly synthesis of silver nanoparticles (AgNPs) and the synthesized AgNPs were used to control multi-drug-resistant microorganisms. The novel strain was Gram stain positive, strictly aerobic, milky white colored, rod shaped and non-motile. The optimal growth temperature, pH and NaCl concentration were 30 °C, 6.5 and 0%, respectively. Based on 16S rRNA gene sequence, strain MAHUQ-38^T belongs to the genus Terrabacter and is most closely related to several Terrabacter type strains (98.2%–98.8%). Terrabacter humi MAHUQ-38^T had a genome of 5,156,829 bp long (19 contigs) with 4555 protein-coding genes, 48 tRNA and 5 rRNA genes. The culture supernatant of strain MAHUQ-38^T was used for the eco-friendly and facile synthesis of AgNPs. The transmission electron microscopy (TEM) image showed the spherical shape of AgNPs with a size of 6 to 24 nm, and the Fourier transform infrared (FTIR) analysis revealed the functional groups responsible for the synthesis of AgNPs. The synthesized AgNPs exhibited strong anti-bacterial activity against multi-drug-resistant pathogens, Escherichia coli and Pseudomonas aeruginosa. Minimal inhibitory/bactericidal concentrations against E. coli and P. aeruginosa were 6.25/50 and 12.5/50 μg/mL, respectively. The AgNPs altered the cell morphology and damaged the cell membrane of pathogens. This study encourages the use of Terrabacter humi for the ecofriendly synthesis of AgNPs to control multi-drug-resistant microorganisms.     

Anti-Bacterial Effect of Cannabidiol against the Cariogenic Streptococcus mutans Bacterium: An In Vitro Study

Dental caries is caused by biofilm-forming acidogenic bacteria, especially Streptococcus mutans, and is still one of the most prevalent human bacterial diseases. The potential use of cannabidiol (CBD) in anti-bacterial therapies has recently emerged. Here we have studied the anti-bacterial and anti-biofilm activity of CBD against S. mutans. We measured minimum inhibitory concentration (MIC) and minimum biofilm inhibitory concentration (MBIC). The bacterial growth and changes in pH values were measured in a kinetic study. The biofilm biomass was assessed by Crystal Violet staining and 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) metabolic assay. Spinning Disk Confocal Microscopy (SDCM) was used to assess biofilm structure, bacterial viability and extracellular polysaccharide (EPS) production. CBD inhibited S. mutans planktonic growth and biofilm formation in a dose-dependent manner, with similar MIC and MBIC values (5 µg/mL). CBD prevented the bacteria-mediated reduction in pH values that correlated with bacterial growth inhibition. SDCM showed a decrease of 50-fold in live bacteria and EPS production. CBD significantly reduced the viability of preformed biofilms at 7.5 µg/mL with an 80 ± 3.1% reduction of metabolic activity. At concentrations above 20 µg/mL, there was almost no bacterial recovery in the CBD-treated preformed biofilms even 48 h after drug withdrawal. Notably, precoating of the culture plate surfaces with CBD prior to incubation with bacteria inhibited biofilm development. Additionally, CBD was found to induce membrane hyperpolarization in S. mutans. Thus, CBD affects multiple processes in S. mutans including its cariogenic properties. In conclusion, we show that CBD has a strong inhibitory effect against cariogenic bacteria, suggesting that it is a potential drug adjuvant for reducing oral pathogenic bacterial load as well as protecting against dental caries.     

A green method of reducing silver nanoparticles based on bagasse pulp extract for preparing ultraviolet (UV)‐curable conductive ink

The silver nanoparticles are gaining extensive attention due to their tremendous applications in conductive field. In this article, we reported a green method of preparing silver nanoparticles (AgNPs) with bagasse pulp extract acting as reducing agents. In this article, ultrasonic extraction method was adopted. This extraction method has the advantages of simple operation and less impurity content in the extract. Silver nitrate (AgNO₃) solution, bagasse extract, and polyvinyl pyrrolidone (PVP) were used as the silver precursor, reducing agent, and protection agent, respectively. Next, hyperbranched polyurethane acrylate (HPUA) as waterborne resin was mixed with AgNPs to prepare UV‐curable conductive ink. The UV‐curable conductive ink synthesized by the AgNPs showed high conductivity, and the obtained conductive ink had very low resistance (1.06 Ω) and resistivity (2.6 × 10^?5 Ω·m), good electronic stability, showing the great advantage in the field of UV‐curable conductive ink. In addition, we tested the AgNPs conductive ink of tearing resistance, rubbing fastness, and bending strength. The results showed the nanosilver conductive ink had good mechanical properties. J. VINYL ADDIT. TECHNOL., 26:90–96, 2020. © 2019 Society of Plastics Engineers     

Preparation and Characterization of Gelatin Nanofibers Containing Silver Nanoparticles

Ag nanoparticles (NPs) were synthesized in formic acid aqueous solutions through chemical reduction. Formic acid was used for a reducing agent of Ag precursor and solvent of gelatin. Silver acetate, silver tetrafluoroborate, silver nitrate, and silver phosphate were used as Ag precursors. Ag⁺ ions were reduced into Ag NPs by formic acid. The formation of Ag NPs was characterized by a UV-Vis spectrophotometer. Ag NPs were quickly generated within a few minutes in silver nitrate (AgNO₃)/formic acid solution. As the water content of formic acid aqueous solution increased, more Ag NPs were generated, at a higher rate and with greater size. When gelatin was added to the AgNO₃/formic acid solution, the Ag NPs were stabilized, resulting in smaller particles. Moreover, gelatin limits further aggregation of Ag NPs, which were effectively dispersed in solution. The amount of Ag NPs formed increased with increasing concentration of AgNO₃ and aging time. Gelatin nanofibers containing Ag NPs were fabricated by electrospinning. The average diameters of gelatin nanofibers were 166.52 ± 32.72 nm, but these decreased with the addition of AgNO₃. The average diameters of the Ag NPs in gelatin nanofibers ranged between 13 and 25 nm, which was confirmed by transmission electron microscopy (TEM).     

Silver(I)-directed growth of metal-organic complex nanocrystals with bidentate ligands of hydroquinine anthraquinone-1,4-diyl diethers as linkers at the water-chloroform interface

Immiscible liquid-liquid interfaces provide unique double phase regions for the design and construction of nanoscale materials. Here, we reported Ag(I)-directed growth of metal-organic complex nanocrystals by using AgNO₃ as a connector in the aqueous solution and bidentate ligand of 1,4-bis(9-O-dihydroquininyl)anthraquinone [(DHQ)₂AQN] and its enantiomer of (DHQD)₂AQN in the chloroform solutions as linkers. The Ag-(DHQ)₂AQN and Ag-(DHQD)₂AQN complex nanocrystals were formed at the liquid-liquid interfaces and characterized by using UV-vis absorption and fluorescence spectroscopy and X-ray photoelectron spectroscopy, as well as by using scanning electron microscopy. Screw-like nanocrystals were formed at the initial 30 min after the interfacial coordination reaction started, then they grew into nanorods after several days, and finally became cubic microcrystals after 2 weeks. The pure ligand showed two emission bands centered at about 363 and 522 nm in the methanol solution, the second one of which was quenched and shifted to about 470 nm in the Ag-complex nanocrystals. Two couples of reversible redox waves were recorded for the Ag-complex nanocrystals; one centered at about -0.25 V (vs. Ag/AgCl) was designated to one electron transfer process of Ag - (DHQ)₂AQN and Ag - (DHQ)₂AQN⁺, and the other one centered at about 0.2 V was designated to one electron transfer process of Ag - (DHQ)₂AQN and Ag⁺ - (DHQ)₂AQN.     

Performance assessment of poly (methacrylic acid)/silver nanoparticles composite as corrosion inhibitor for aluminium in acidic environment

This article reports the preparation of poly (methacrylic acid)/silver nanoparticles composite (PMAA/AgNPs) by in situ mixing of aqueous solutions of PMAA and 1 mM AgNO₃ with natural honey as reducing and stabilizing agent. The prepared PMAA/AgNPs composite was characterized by UV–vis spectroscopy, Fourier transformed infrared, X-ray diffraction and energy dispersive spectroscopy (EDS) while the morphology of the AgNPs in the composite was obtained by transmission electron microscopy (TEM). TEM results revealed that the AgNPs were spherical in shape. The performance of PMAA/AgNPs composite as anticorrosion material for Al in acidic environment was examined by electrochemical, weight loss methods, complemented by surface analysis characterization with scanning electron microscopy (SEM), EDS and water contact angle measurements. Results obtained indicate that PMAA/AgNPs composite is effective corrosion inhibitor for Al in an acid-induced corrosive environment. Inhibition efficiency increased with increase in composite concentration but decreased with rise in temperature. From potentiodynamic polarization results, PMAA/AgNPs composite is found to function as a mixed-type corrosion inhibitor. The adsorption of the composite onto Al surface was found to follow El-Awady et al. adsorption isotherm model. SEM, EDS and water contact angle results confirmed the adsorption of the composite on Al surface.     

Hydrothermal synthesis of well-stable silver nanoparticles and their application for enzymeless hydrogen peroxide detection

We reported on a facile hydrothermal synthesis of well-stable silver nanopartiles (AgNPs) from an aqueous solution of AgNO₃ and poly[(2-ethyldimethylammonioethyl methacrylate ethyl sulfate)-co-(1-vinylpyrrolidone)] (PQ11), a kind of cationic polyelectrolyte, at 100 °C without the extra introduction of other reducing agents and protective agents. Transmission electron microscopy (TEM) observation reveals that the AgNPs thus formed mainly consist of small nanoparticles about 5 nm in diameter. It is found that such dispersion can form stable AgNPs-embedded films on bare electrode surfaces and these nanoparticles exhibit remarkable catalytic performance for hydrogen peroxide (H₂O₂) detection. The sensor has a fast amperometric response time of less than 2 s. The linear range is estimated to be from 1 × 10⁻⁴ M to 0.18 M (r = 0.998) and the detection limit is estimated to be 3.39 × 10⁻⁵ M at a signal-to-noise ratio of 3, respectively.     

<Emphasis Type="Italic">Brassica rapa</Emphasis> var. <Emphasis Type="Italic">japonica</Emphasis> Leaf Extract Mediated Green Synthesis of Crystalline Silver Nanoparticles and Evaluation of Their Stability,Cytotoxicity and Antibacterial Activity

Silver nanoparticles (AgNPs) were successfully synthesized from the reduction of Ag⁺ using AgNO₃ solution as a precursor and Brassica rapa var. japonica leaf extract as a reducing and capping agent. This study was aimed at synthesis of AgNPs, exhibiting less toxicity with high antibacterial activity. The characterization of AgNPs was carried out using UV–Vis spectrometry, energy dispersive X-ray spectrometry, fourier transform infrared spectrometry, field emission scanning electron microscopy, X-ray diffraction, atomic absorption spectrometry, and transmission electron microscopy analyses. The analyses data revealed the successful synthesis of nano-crystalline Ag possessing more stability than commercial AgNPs. The cytotoxicity of Brassica AgNPs was compared with commercial AgNPs using in vitro PC12 cell model. Commercial AgNPs reduced cell viability to 23% (control 97%) and increased lactate dehydrogenase activity at a concentration of 3 ppm, whereas, Brassica AgNPs did not show any effects on both of the cytotoxicity parameters up to a concentration level of 10 ppm in PC12 cells. Moreover, Brassica AgNPs exhibited antibacterial activity in terms of zone of inhibition against E. coli (11.1?±?0.5 mm) and Enterobacter sp. (15?±?0.5 mm) which was higher than some previously reported green-synthesised AgNPs. Thus, this finding can be a matter of interest for the production and safe use of green-AgNPs in consumer products.     

Effect of Silver Nanoparticles on the In Vitro Regeneration,Biochemical, Genetic,and Phenotype Variation in Adventitious Shoots Produced from Leaf Explants in Chrysanthemum

Novel and unique properties of nanomaterials, which are not apparent in larger-size forms of the same material, encourage the undertaking of studies exploring the multifaced effects of nanomaterials on plants. The results of such studies are not only scientifically relevant but, additionally, can be implemented to plant production and/or breeding. This study aimed to verify the applicability of silver nanoparticles (AgNPs) as a mutagen in chrysanthemum breeding. Chrysanthemum × grandiflorum (Ramat.) Kitam. ‘Lilac Wonder’ and ‘Richmond’ leaf explants were cultured on the modified MS medium supplemented with 0.6 mg·L⁻¹ 6-benzylaminopurine (BAP) and 2 mg·L⁻¹ indole-3-acetic acid (IAA) and treated with AgNPs (spherical; 20 nm in diameter size; 0, 50, and 100 mg·L⁻¹). AgNPs strongly suppressed the capability of leaf explants to form adventitious shoots and the efficiency of shoot regeneration. The content of primary and secondary metabolites (chlorophyll a, chlorophyll b, total chlorophylls, carotenoids, anthocyanins, phenolic compounds) and the activity of enzymatic antioxidants (superoxide dismutase and guaiacol peroxide) in leaf explants varied depending on the AgNPs treatment and age of culture. Phenotype variations of ex vitro cultivated chrysanthemums, covering the color and pigment content in the inflorescence, were detected in one 50 mg·L⁻¹ AgNPs-derived and five 100 mg·L⁻¹ AgNPs-derived ‘Lilac Wonder’ plants and were manifested as the color change from pink to burgundy-gold. However, no changes in inflorescence color/shape were found among AgNPs-treated ‘Richmond’ chrysanthemums. On the other hand, the stem height, number of leaves, and chlorophyll content in leaves varied depending on the AgNPs treatment and the cultivar analyzed. A significant effect of AgNPs on the genetic variation occurrence was found. A nearly two-fold higher share of polymorphic products, in both cultivars studied, was generated by RAPD markers than by SCoTs. To conclude, protocols using leaf explant treatment with AgNPs can be used as a novel breeding technique in chrysanthemum. However, the individual cultivars may differ in biochemical response, the efficiency of in vitro regeneration, genetic variation, and frequency of induced mutations in flowering plants.     

Identification and Characterization of a Thermostable GH36 α-Galactosidase from Anoxybacillus vitaminiphilus WMF1 and Its Application in Synthesizing Isofloridoside by Reverse Hydrolysis

An α-galactosidase-producing strain named Anoxybacillus vitaminiphilus WMF1, which catalyzed the reverse hydrolysis of d-galactose and glycerol to produce isofloridoside, was isolated from soil. The α-galactosidase (galV) gene was cloned and expressed in Escherichia coli. The galV was classified into the GH36 family with a molecular mass of 80 kDa. The optimum pH and temperature of galV was pH 7.5 and 60 °C, respectively, and it was highly stable at alkaline pH (6.0–9.0) and temperature below 65 °C. The specificity for p-nitrophenyl α-d-galactopyranoside was 70 U/mg, much higher than that for raffinose and stachyose. Among the metals and reagents tested, galV showed tolerance in the presence of various organic solvents. The kinetic parameters of the enzyme towards p-nitrophenyl α-d-galactopyranoside were obtained as K_m (0.12 mM), V_max (1.10 × 10⁻³ mM s⁻¹), and K_cat/K_m (763.92 mM⁻¹ s⁻¹). During the reaction of reverse hydrolysis, the enzyme exhibited high specificity towards the glycosyl donor galactose and acceptors glycerol, ethanol and ethylene glycol. Finally, the isofloridoside was synthesized using galactose as the donor and glycerol as the acceptor with a 26.6% conversion rate of galactose. This study indicated that galV might provide a potential enzyme source in producing isofloridoside because of its high thermal stability and activity.     

Role of vanadium ions,oxygen vacancies,and interstitial zinc in room temperature ferromagnetism on ZnO-V2O5 nanoparticles

In this work, we present the role of vanadium ions (V⁺⁵ and V⁺³), oxygen vacancies (V_O), and interstitial zinc (Zn_i) to the contribution of specific magnetization for a mixture of ZnO-V₂O₅ nanoparticles (NPs). Samples were obtained by mechanical milling of dry powders and ethanol-assisted milling for 1 h with a fixed atomic ratio V/Zn?=?5% at. For comparison, pure ZnO samples were also prepared. All samples exhibit a room temperature magnetization ranging from 1.18?×?10⁻³ to 3.5?×?10⁻³ emu/gr. Pure ZnO powders (1.34?×?10⁻³ emu/gr) milled with ethanol exhibit slight increase in magnetization attributed to formation of Zn_i, while dry milled ZnO powders exhibit a decrease of magnetization due to a reduction of V_O concentration. For the ZnO-V₂O₅ system, dry milled and thermally treated samples under reducing atmosphere exhibit a large paramagnetic component associated to the formation of V₂O₃ and secondary phases containing V⁺³ ions; at the same time, an increase of V_O is observed with an abrupt fall of magnetization to σ?~?0.7?×?10⁻³ emu/gr due to segregation of V oxides and formation of secondary phases. As mechanical milling is an aggressive synthesis method, high disorder is induced at the surface of the ZnO NPs, including V_O and Zn_i depending on the chemical environment. Thermal treatment restores partially structural order at the surface of the NPs, thus reducing the amount of Zn_i at the same time that V₂O₅ NPs segregate reducing the direct contact with the surface of ZnO NPs. Additional samples were milled for longer time up to 24 h to study the effect of milling on the magnetization; 1-h milled samples have the highest magnetizations. Structural characterization was carried out using X-ray diffraction and transmission electron microscopy. Identification of V_O and Zn_i was carried out with Raman spectra, and energy-dispersive X-ray spectroscopy was used to verify that V did not diffuse into ZnO NPs as well to quantify O/Zn ratios.     

Fabrication and evolution of multilayer silver nanofilms for surface-enhanced Raman scattering sensing of arsenate

Surface-enhanced Raman scattering (SERS) has recently been investigated extensively for chemical and biomolecular sensing. Multilayer silver (Ag) nanofilms deposited on glass slides by a simple electroless deposition process have been fabricated as active substrates (Ag/GL substrates) for arsenate SERS sensing. The nanostructures and layer characteristics of the multilayer Ag films could be tuned by varying the concentrations of reactants (AgNO₃/BuNH₂) and reaction time. A Ag nanoparticles (AgNPs) double-layer was formed by directly reducing Ag⁺ ions on the glass surfaces, while a top layer (3rd-layer) of Ag dendrites was deposited on the double-layer by self-assembling AgNPs or AgNPs aggregates which had already formed in the suspension. The SERS spectra of arsenate showed that characteristic SERS bands of arsenate appear at approximately 780 and 420 cm^-1, and the former possesses higher SERS intensity. By comparing the peak heights of the approximately 780 cm^-1 band of the SERS spectra, the optimal Ag/GL substrate has been obtained for the most sensitive SERS sensing of arsenate. Using this optimal substrate, the limit of detection (LOD) of arsenate was determined to be approximately 5 μg·l^-1.     

Enhanced non-linear optical properties of Eu3+ activated glasses by embedding silver nanoparticles

Tri-positive lanthanide ion (Eu³⁺) activated glasses doped with different concentrations of silver (Ag0₎ nanoparticles obtained using thermal reducing agent were fabricated by applying the method of melt quench. The formation of Ag⁰ nanoparticles in glasses was revealed by the surface plasmon resonance (SPR) peak in the absorption spectra. Transmission electron microscopic measurements confirmed the presence of spherically shaped Ag⁰ nanoparticles of different size distribution. The absorption spectra showed a red–shift of the SPR peak with an increase in AgNO₃ concentration occurring through Ostwald's ripening process because of the growth of particle size (as evidenced from microscope images). The non-linear optical (NLO) and optical limiting measurements were performed in the near infrared spectral region and femtosecond pulse excitation. The non-linear parameters were found to increase as the AgNO₃ concentration increased to 0.6 mol %, however, the parameters subsequently decreased at higher doping level. The optical limiting threshold values demonstrated a reverse trend. The increase in non-linear optical properties regarding Ag nanoparticles concentration attributed to the enhancement of polarizabilities of glasses that occurred through local field stimulated by SPR of Ag nanoparticles when exposed to laser radiation of high energy. The increase in NLO coefficients (particularly the non-linear absorption coefficient) and the decrease in optical limiting threshold values with AgNO₃ concentration (up to 0.6 mol %) indicated that these glasses containing 0.6 mol % AgNO₃ are useful for the construction of the power optical limiters that function at the infrared region in the femtosecond pulse regime.     

Naturally inspired SERS substrates fabricated by photocatalytically depositing silver nanoparticles on cicada wings

Densely stacked Ag nanoparticles with an average diameter of 199 nm were effectively deposited on TiO₂-coated cicada wings (Ag/TiO₂-coated wings) from a water-ethanol solution of AgNO₃ using ultraviolet light irradiation at room temperature. It was seen that the surfaces of bare cicada wings contained nanopillar array structures. In the optical absorption spectra of the Ag/TiO₂-coated wings, the absorption peak due to the localized surface plasmon resonance (LSPR) of Ag nanoparticles was observed at 440 nm. Strong Surface-enhanced Raman scattering (SERS) signals of Rhodamine 6G adsorbed on the Ag/TiO₂-coated wings were clearly observed using the 514.5-nm line of an Ar⁺ laser. The Ag/TiO₂-coated wings can be a promising candidate for naturally inspired SERS substrates.     

Thermophilic Inorganic Pyrophosphatase Ton1914 from Thermococcus onnurineus NA1 Removes the Inhibitory Effect of Pyrophosphate

Pyrophosphate (PP_i) is a byproduct of over 120 biosynthetic reactions, and an overabundance of PP_i can inhibit industrial synthesis. Pyrophosphatases (PPases) can effectively hydrolyze pyrophosphate to remove the inhibitory effect of pyrophosphate. In the present work, a thermophilic alkaline inorganic pyrophosphatase from Thermococcus onnurineus NA1 was studied. The optimum pH and temperature of Ton1914 were 9.0 and 80 °C, respectively, and the half-life was 52 h at 70 °C and 2.5 h at 90 °C. Ton1914 showed excellent thermal stability, and its relative enzyme activity, when incubated in Tris-HCl 9.0 containing 1.6 mM Mg²⁺ at 90 °C for 5 h, was still 100%, which was much higher than the control, whose relative activity was only 37%. Real-time quantitative PCR (qPCR) results showed that the promotion of Ton1914 on long-chain DNA was more efficient than that on short-chain DNA when the same concentration of templates was supplemented. The yield of long-chain products was increased by 32–41%, while that of short-chain DNA was only improved by 9.5–15%. Ton1914 also increased the yields of UDP-glucose and UDP-galactose enzymatic synthesis from 40.1% to 84.8% and 20.9% to 35.4%, respectively. These findings suggested that Ton1914 has considerable potential for industrial applications.