Performance characteristics of an irreversible magnetic Brayton refrigeration cycle

Based on the thermodynamic properties of a paramagnetic salt, an irreversible model of the magnetic Brayton refrigeration cycle is established, in which the working substance is a special paramagnetic material. The expressions of the important performance parameters, such as the coefficient of performance, refrigeration load and work input, are derived. Moreover, the optimal performance parameters are obtained at the maximum coefficient of performance. The results obtained here may include the ones of the magnetic Brayton refrigeration cycle using the magnetic material obeyed the Curie law as the working substance, the magnetic Brayton refrigeration cycle without regeneration and the eversible magnetic Brayton refrigeration cycle. Therefore, the results obtained here have general significance and will be helpful to deeply understand the performance of a magnetic Brayton refrigeration cycle.     

回热式空气制冷循环性能新析

采用制冷率密度这一新的性能参数作为热力学优化目标,用有限时间热力学的方法,分析了回热式空气制冷循环的性能,得到了普适的解析关系式,并由数值计算分析了压比、热导率分配、压缩机和膨胀机的效率等参数对制冷率密度的影响特点。     

一种新型吸收-压缩复合制冷循环模拟

为了对一种新型吸收-压缩复合制冷循环的性能进行模拟,使用Visual Basic语言自行编制了一个程序.该程序模拟了发生温度、蒸发温度、冷凝温度、加热量、制冷量对系统性能的影响,并将其性能与传统蒸气压缩式制冷循环作了对比.模拟结果表明:当发生温度升高时,新循环的制冷系数先增大后减小;当蒸发温度升高或加热量增大时,新循环...     

Parametric optimization of a new combined refrigeration cycle – active thermal potentiostatting system

The active thermal potentiostatting system proposed by Martinovskii and Tsirlin is directly generalized to a more practical case, in which one intermediate chamber, besides a thermal potentiostatting chamber, and two irreversible refrigeration cycles are included and the influence of the thermal resistance between the working fluid and the reservoirs, the heat leakages from the environment to the intermediate chamber and from the intermediate chamber to the potentiostatting chamber are taken into account. Expressions for the main parameters of the system are derived. By using the optimal control theory, the minimum total power input of the system with non-zero cooling rates is calculated and the temperatures of the working fluid in the isothermal processes of the refrigeration cycles are optimized. The optimal allocation of the heat-transfer areas of the heat-exchangers in the refrigeration cycles is discussed in detail. The results obtained here are more general and useful than the relevant results in literature and can provide some valuable guidance for the optimal design and operation of real active thermal potentiostatting systems.     

A novel ejector-absorption combined refrigeration cycle

This paper presents a novel ejector-absorption combined refrigeration cycle. When the temperature of the heat source is high enough, this cycle will work as a double-effect cycle. If the temperature of the heat source is lower than required temperature of heat source used to drive conventional double-effect absorption refrigeration cycle but much higher than required temperature of heat source used to drive conventional single-effect absorption refrigeration cycle, the COP of new cycle will also be higher than that of conventional single-effect absorption refrigeration cycle. Simulation results show that the COP of the cycle is 30% higher than that of the conventional single-effect absorption refrigeration cycle at some working conditions even in the later case.     

Performance analysis of a combined vapor compression cycle and ejector cycle for refrigeration cogeneration

A hybrid vapor compression refrigeration (HVCR) system, which combines a vapor compression refrigeration (VCR) system and an ejector refrigeration (ER) system, was developed. The waste heat energy from the gas cooler in the VCR system is applied as driven source towards ER system.Thermodynamic investigations on the performance of the HVCR system, using CO₂ as a refrigerant, are performed with energetic and exergetic methods, and the comparative analyses with the VCR system are conducted. Comprehensive effects of key operating parameters on the system performance are also studied. The results indicate that for the same cooling capacity, the coefficient of performance (COP) of the HVCR system shows 25% higher COP and the total mechanical power consumption is reduced by 20% than that of conventional VCR system, respectively. The performance characteristics of the proposed cycle show its application potential in cooling and air-conditioning.     

Thermodynamic optimization of combined power and refrigeration cycle using binary organic working fluid

A combined cycle has been proposed for the production of power and refrigeration simultaneously. The cycle can be driven by low grade heat sources such as solar, geothermal and waste heat sources. In the first part of this paper, a model has been developed to perform a parametric analysis to evaluate the effects of important parameters on the performance of the cycle, which is a combination of Rankine and absorption refrigeration cycle. Propane–decane has been used as an organic dual working fluid. In the second part, multi objective genetic algorithm is applied for Pareto approach optimization of the cycle. There are three important conflicting objectives namely, turbine work (W_t), cooling capacity (Q_c) and thermal efficiency (η_th) which have been selected to find the best possible combination of these performance parameters. Optimization has been carried out by varying turbine inlet pressure, superheated temperature and condenser temperature as design variables. Among optimum design parameters, a trade-off point is selected. Turbine inlet pressure, superheated temperature and condenser temperature are assumed to be 29.5 bar, 410 K and 386.6 K respectively as the values assigned to this point. Furthermore, it has been shown that some interesting and important relationships can be discovered among optimal objective functions and decision variables involved, consequently.     

Development and performance analysis of a multi-temperature combined compression/ejection refrigeration cycle using environment friendly refrigerants

A combined compression/ejection refrigeration cycle intended for the simultaneous production of cold for refrigeration and freezing, and operating based on environment friendly refrigerants is proposed and analyzed in this study. This makes it possible to valorize the low-temperature heat sources in the ejector cycle, thereby reducing the share of mechanical energy otherwise required to operate the conventional two-stage vapor compression system.A selection of eight candidates' fluids was performed. The developed simulation model helped to establish the strong dependence between system performances and the ratio of the cooling capacities of refrigeration and freezing. In addition to the effect of the temperature level of cold production, the influence of the ambient temperature on system performance was also analyzed when using refrigerants R290, R152a and R134a.     

Thermoeconomic optimization of an irreversible Stirling cryogenic refrigerator cycle

This communication presents the thermoeconomic optimization of an irreversible Stirling cryogenic refrigerator cycle. The external irreversibility is due to finite temperature difference between the working fluid and the external reservoirs while the internal irreversibility is due to the regenerative heat loss. The thermoeconomic function is defined as the cooling load divided by the total cost of the system plus the running cost. The thermoeconomic function is optimized with respect to the working fluid temperatures and the values for various parameters at the optimal operating condition are calculated. The effects of different operating parameters on the performance of the cycle have been studied. It is found that the effect of regenerative effectiveness is more than those of the other parameters on all the performance parameters of the cycle, for the same set of operating condition.     

Performance of absorption refrigeration cycle at maximum cooling rate

The influence of irreversibility of finite-rate heat transfer on the performance of an absorption refrigerator is investigated using an endoreversible cycle model with continuous flow. The cooling rate is adopted as an objective function for refrigerator optimization. The maximum cooling rate and the corresponding coefficient of performance are derived. The optimal performance with respect to heat transfer areas of the refrigerator is analysed. In addition, certain significant conclusions are reached.     

Improvements of a room-temperature magnetic refrigerator combined with Stirling cycle refrigeration effect

A high pressure hybrid refrigerator that combines the active magnetic refrigeration effect with the Stirling cycle refrigeration effect at room temperature is studied here. In the apparatus, a helium-gas-filled alfa-type Stirling refrigerator uses Gd sheets as the regenerator and the regenerator is put in a magnetic field varying from 0 to 1.4 T, which is provided by a Halbach-type rotary permanent magnet assembly. With an operating pressure of 5.5 MPa and a frequency of 2.5 Hz, a no-load temperature of 273.8 K was reached in 9 minutes, which is lower than that of 277.6 K for pure Stirling cycle. For the hybrid operation, cooling powers of 40.3 W and 56.4 W were achieved over temperature spans of 15 K and 12 K, respectively. For the latter case, the cooling power improves by 28.5% if compared with that exploiting only the Stirling cycle refrigeration effect.     

A theoretical study on a novel combined power and ejector refrigeration cycle

A new combined power and refrigeration cycle is proposed for the cogeneration, which combines the Rankine cycle and the ejector refrigeration cycle by adding an extraction turbine between heat recovery vapor generator (HRVG) and ejector. This combined cycle could produce both power output and refrigeration output simultaneously, and could be driven by the flue gas from gas turbine or engine, solar energy, geothermal energy and industrial waste heats. Parametric analysis and exergy analysis are conducted to examine the effects of thermodynamic parameters on the performance and exergy destruction in each component for the combined cycle. The results show that the condenser temperature, the evaporator temperature, the turbine inlet pressure, the turbine extraction pressure and extraction ratio have significant effects on the turbine power output, refrigeration output, exergy efficiency and exergy destruction in each component in the combined cycle. It is also shown that the biggest exergy destruction occurs in the heat recovery vapor generator, followed by the ejector and turbine.     

A new thermoeconomic approach and parametric study of an irreversible regenerative Brayton refrigeration cycle

The detailed parametric study of an irreversible regenerative Brayton refrigerator cycle using the new thermoeconomic approach is presented in this paper. The external irreversibility is due to finite temperature difference between the cycle and the external reservoirs while the internal irreversibilities are due to the nonisentropic compression and expansion processes and the regenerative loss. The thermoeconomic objective function defined as the cooling load per unit cost is optimized with respect to the state point temperatures for a typical set of operating conditions. The power input and cooling load are found to be decreasing functions of the expansion outlet temperature (T₁), while it is the reverse in the case of COP. On the other hand, there are optimal values of the temperature T₁, cooling load, power input and COP at which the cycle attains the maximum objective function for a typical set of operating parameters. Again, the objective function, COP and cooling load further enhance, while the power input goes down, as the various values of the effectiveness or efficiency components are increased.     

Thermoeconomic optimization of a two stage combined refrigeration system: a finite-time approach

A finite-time thermoeconomic performance analysis based on a new kind of optimization criterion has been carried out for a two-stage endoreversible combined refrigeration cycle model. The optimal performances and design parameters that maximize the objective function (cooling load per total cost) are investigated. In this context, the optimal temperatures of the working fluids, the optimum performance coefficient, the optimum specific cooling load and the optimal distribution of the heat exchanger areas are determined in terms of technical and economical parameters. The effects of the economical parameter that characterizes the investment and energy consumption costs on the general and the optimal performances have been discussed.     

Application of an ejector in autocascade refrigeration cycle for the performance improvement

This paper presented a novel autocascade refrigeration cycle (NARC) with an ejector. In the NARC, the ejector is used to recover some available work to increase the compressor suction pressure. The NARC enables the compressor to operate at lower pressure ratio, which in turn improves the cycle performance. Theoretical computation model based on the constant pressure-mixing model for the ejector is used to perform a thermodynamic cycle analysis for the NARC with the refrigerant mixture of R23/R134a. The effects of some main parameters on cycle performance were investigated. The results show the NARC has an outstanding merit in decreasing the pressure ratio of compressor as well as increasing the COP. For NARC operated at the condenser outlet temperature of 40 °C, the evaporator inlet temperature of −40.3 °C, and the mass fraction of R23 is 0.15, the pressure ratio of the ejector reaches to 1.35, the pressure ratio of compressor is reduced by 25.8% and the COP is improved by 19.1% over the conventional autocascade refrigeration cycle.     

不可逆回热式玻色布雷顿制冷循环性能分析

基于玻色气体的热力学性质和回热式布雷顿制冷循环的不可逆模型,导出循环的一些重要性能参数,如循环的制冷量、回热量、输入功和性能系数的一般表达式。通过数值计算获得了循环的一些重要的性能特性曲线,分析了循环的不可逆性和回热特性对玻色布雷顿制冷机性能的影响。     

高性能战斗机组合式制冷系统的仿真及性能

为满足高性能战斗机电子设备及其它相关元件的制冷要求,在对其技术方案进行相关分析后,建立了各部件的数学模型,并通过Simulink工具构建空气循环/蒸发循环系统各部件的仿真模块.在此基础上,搭建了综合环境控制系统的仿真平台,可利用该仿真平台对空气循环/蒸发循环系统的性能进行预测和评估.仿真结果表明,空气循环/蒸发循环综合环控系统性能要好于传统的单一空气循环制冷系统,该仿真模型可供高性能战斗机环控系统的设计及研制阶段的性能评测之用.     

二氧化碳复叠式制冷循环的热力性能分析

分析了CO2的热力特性和CO2复叠式制冷循环的优势及应用现状,概述了复叠式制冷循环的原理及组成,从理论和实验两个方面对NH3/CO2和R290/CO2复叠式制冷循环进行了分析,得出了COP以及高低压级质量流量比与蒸发温度、冷凝温度、冷凝蒸发温差之间的关系.     

Research on performance of regenerative room temperature magnetic refrigeration cycle

On the basis of classical Langevin theory along with statistical mechanics, thermodynamics and magnetism, a new expression of magnetocaloric parameters used for room temperature magnetic refrigeration is proposed, which is briefer and more accurate than the existing one, providing a new way for studying performance of regenerative room temperature magnetic Ericsson refrigeration cycle. Influences of temperature of heat reservoirs and magnetic intensity on cycle refrigeration capacity and coefficient of performance are analyzed. The results show that the maximal temperature span of the cycle increases but its increasing rate decreases with the increase of magnetic field strength. In addition, there exists only one maximum value of effective refrigerating capacity. Two cycles with the same COP can reach a same temperature span under a certain magnetic field strength. A large magnetic field strength can improve COP but the increase rate of COP decreases.     

Development of a circulating system for a jet refrigeration cycle

This paper proposed a workless-generator-feeding (WGF) system for a jet refrigeration cycle, using R141b. This feeding system does not require any mechanical power. The liquid refrigerant from the condenser was fed to the vapour-generator by means of the generator pressure and gravitational force. The system was tested and compared with a conventional system using a mechanical pump. It was found that this system was workable. The heat input to the generator was slightly higher than that for a system using a mechanical pump. The jet refrigeration cycle employing this new feeding system provided a slightly lower coefficient of performance (COP) compared to a system using a mechanical pump. However, this new system did not require any mechanical energy. Therefore, the jet refrigeration system employing this WGF system is truly a heat-power refrigeration cycle.