The formation of zinc oxide nanoparticles from zinc acetylacetonate hydrate in tert-butanol: A comparative mechanistic study with isomeric C4 alcohols as the media

Spherical ZnO nanoparticles were synthesized via a simple one-pot synthesis route by refluxing an oversaturated solution of zinc acetylacetonate hydrate in tert-butanol. A reaction occurs via a ligand-exchange mechanism, i.e., the dissociation of the acetylacetonate group from the zinc center. The formation of ZnO is slow because of the low nucleophilicity, boiling point and dielectric constant of the medium.The single-crystal ZnO nanoparticles develop near the precursor surface until they reach a critical size and, once diffused into the medium, do not agglomerate, but retain their size and morphology.     

Preparation and characterization of a novel hyperbranched polyphosphate ester

Polyphosphate esters have received a great deal of attention due to their important application in biomaterials field. Hyperbranched structure of polymers may support unique properties, including low viscosity and perfect intrinsic property. We report here three generations of hyperbranched polyphosphate esters (HPPE-1, HPPE-2 and HPPE-3) synthesized from a dehydrochlorination reaction between 1,3,5-tris(2-hydroxyethyl)cyanuric acid (THEIC) and phosphorus oxychloride (POCl₃), and characterize their chemical structures by FT-IR, ¹H NMR, ¹³C NMR, ³¹P NMR and 2D NMR (¹H,¹H-COSY and ¹³C, ¹H-HSQC) techniques. Degrees of branching of HPPE-1, HPPE-2 and HPPE-3 are 0.90, 0.91 and 0.87 respectively from the calculation of their ¹³C NMR spectra. Molecular weights of HPPE-1, HPPE-2 and HPPE-3 are m/z 1530, 1768 and 2750 from their MALDI-TOF-MS spectra. Study on thermal degradation mechanism of the HPPE-2 by a 3D FT-IR/TG technology shows that there are two cracking processes of its molecular chains, including the thermal degradation of hydroxylethyl-ended groups, nitrogen heterocycle and –CH₂CH₂– groups of HPPE-2.     

Preparation and characterization of Y3Al5O12 (YAG) nano-powder by co-precipitation method

YAG precursor was synthesized by a co-precipitation method from a mixed solution of aluminum and yttrium nitrates with aqueous ammonia as the precipitator. The structure, phase evolution and morphology of YAG precursor and the sintered powders were studied by means of IR, TG/DTA, XRD, TEM methods. It was found the precursor with approximate composition of Al(OH)₃·0.3[Y₂(OH)₅·(NO₃)₂·2H₂O] directly transformed to pure-YAG phase at 800 °C and no intermediate phases were detected. YAG nanocrystalline powders from sintering the precursor at different temperatures were less-aggregated and the diameters of the grains were about 40-100 nm. BET surface area of the particles decreased with increase of calcination temperature and the powder sintered at 800 °C can be used for fabrication of transparent YAG ceramics.     

The synthesis and selected properties of new compounds: Mg3Fe4(VO4)6 and Zn3Fe4(VO4)6

New compounds: Mg₃Fe₄(VO₄)₆ and Zn₃Fe₄(VO₄)₆ were obtained from a solid state reaction. The temperatures of melting of Mg₃Fe₄(VO₄)₆ and Zn₃Fe₄(VO₄)₆ amount to 950±5 and 850±5°C, respectively. The indexing results and the calculated unit cell parameters for both compounds are given and suggest that both phases are isotypic with Mn₃Fe₄(VO₄)₆. The IR spectra of the above-mentioned compounds are presented.     

Preparation, characterization and electrical conductivity studies of nanocrystalline La doped BaMoO4

Different compositions of scheelite type nanocrystalline La doped BaMoO₄ [Ba_1−xLa_xMoO_4+x/2, where x = 0, 0.1, 0.2, 0.3, 0.4 and 0.5] samples were prepared by acrylamide assisted sol-gel combustion process. Dried gels prepared at 60 °C were heated at different temperatures and characterized using TG/DTA, XRD, FTIR and SEM-EDX techniques. From XRD patterns, crystalline phases for La doped BaMoO₄ samples were confirmed and their average crystallite sizes were calculated using Scherrer's formula and it was found to be less than 80 nm. Structure and thermal behavior of scheelite type nanocrystalline La doped BaMoO₄ samples were identified respectively using FTIR and TG/DTA measurements. Microstructure and existence of O, La, Ba and Mo elements in the La doped BaMoO₄ samples were obtained from SEM-EDX and HRTEMtechniques. The ‘d’ spacing values were obtained for different (h k l) planes and were well matched with the standard BaMoO₄. (h k l) values for different directions of planes were assigned for the observed HRTEM images and were matched with standard BaMoO₄. Grain and grain boundary conductivities were evaluated by analyzing the impedance data, using the Winfit software, measured at different temperatures.     

Preparation, characterization, and luminescence of host (Y zeolite)-guest (FeS, CoS, NiS) nanocomposite materials

The host-guest nanocomposites (Y zeolite)-sulfides (FeS, CoS, NiS) were successfully prepared by a hydrothermal method and characterized by powder XRD, chemical analysis, adsorption technique, infrared spectroscopy and X-ray photoelectron spectroscopy. The Y zeolite-NiS host-guest nanocomposite material was found to exhibit luminescence. This paper suggests that the luminescence mechanism of Y-NiS resulted from the excitons in the confinement areas and from the defects in the materials. The material Y-NiS may be used as luminescent materials.     

Crystal structure, thermal analysis and IR spectrometric investigation of bis(o-anisidinium) sulfate (C7H10NO)2SO4

Chemical preparation, X-ray single-crystal, thermal behaviour, and IR spectroscopy investigations are given for a new organic cation sulfate (C₇H₁₀NO)₂SO₄ (denoted BOAS) in the solid state. This compound crystallizes in the monoclinic space group P2₁/c. The unit cell dimensions are: a = 7.010(3) Å, b = 11.142(5) Å, c = 20.770(8) Å, β = 95.27(3)° with V = 1615.4(12) Å³ and Z = 4. The structure has been solved using a direct method and refined to a reliability R factor of 0.047. The title compound consists of a framework of isolated SO₄ tetrahedral interleaved with organic molecules, so as to build isolated ribbons parallel to a-axis. In the present work, we describe the crystal structure, thermal behaviour and IR analysis of this new compound.     

Comprehensive structural studies of ultra-fine nanocrystalline calcium hydroxyapatite using MAS NMR and FT-IR spectroscopic methods

Three nanoapatites produced using a microwave solvothermal synthesis (MSS), including one with a mean crystal size of only 6 nm, were characterized by high-resolution solid-state NMR (¹H and ³¹P) and FT-IR spectroscopies. It was found that nanoapatite particles had an inner crystal core covered by a non-apatitic surface hydrated layer with an outermost liquid-like zone. Various physicochemical properties of those apatite compartments were determined. Important structural details, such as deficiency and disorder of structural OH⁻ ions were discovered and discussed. The materials were also compared with respect to the reaction time and thermal post-synthesis treatment in order to optimize their preparation conditions to the required performance. The study emphasizes the influence of the surface hydrated layer on the physicochemical properties and biological activity of nanoapatites.     

Hydrothermal synthesis, characterization and magnetic properties of (N4C6H21)·(Co(H2PO4)(HPO4)2)

The title compound, (N₄C₆H₂₁)·(Co(H₂PO₄)(HPO₄)₂), was prepared hydrothermally (473 K, 10 days, autogenous pressure), in the presence of the tris(2-aminoethyl)amine as organic template. Its structure is built up from a network of four membered-rings, formed by the vertex linkages between [CoO₄] and [H₂PO₄] tetrahedra with [HPO₄] moieties hanging from the Co center. Hydrogen bonds involving the cobalt phosphate units and the triply protonated amine molecule, contribute to the stability of the structure. The IR spectrum shows bands characteristic of the (N₄C₆H₂₁)³⁺ cations and the (H₂PO₄)⁻ and (HPO₄)²⁻ phosphate anions. The UV-Visible-NIR spectrum confirms the tetrahedral coordination of Co²⁺ ions. The TGA analysis indicates that the dehydration of (N₄C₆H₂₁)·(Co(H₂PO₄)(HPO₄)₂) occurs in one step. Magnetic measurements from 4.5 to 305 K show a weak antiferromagnetic character of this compound.     

Preparation and characterization of nanocrystallite size cuprous oxide

Uniform spheres of nanocrystallite size cuprous oxide particles have been prepared by a simple polyol process using cupric nitrate as a precursor in ethylene glycol. As synthesized compound was dried at 333 K in a vacuum oven and characterized by XRD, FT-IR and SEM techniques. The crystallite size of the cuprous oxide calculated from Scherer's formula was found to be ∼11 nm.     

Preparation and properties of nickel ferrite (NiFe2O4) nanoparticles via sol-gel auto-combustion method

Using nickel and ferric nitrates and citric acid, NiFe₂O₄ nanoparticles are prepared by a simple and cost-effective polyvinylpyrrolidone (PVP) assisted sol-gel auto-combustion method. The synthesised nanoparticles consist of single phase inverse spinel structure of NiFe₂O₄. The particles are in spherical shape with an average size of ∼8 nm. The vibrational properties show tetrahedral and octahedral sites of NiFe₂O₄ nanoparticles. The super-paramagnetism is observed with magnetic saturation (M_s) of 50.4 emug^−1.     

Synthesis,crystal growth,structural, spectral,thermal, mechanical,linear and nonlinear optical studies of organic single crystal 4-Iodo 4-nitrostilbene (IONS): A potential NLO material

An organic nonlinear optical material 4-Iodo 4-nitrostilbene (IONS) has been synthesized and good optical quality single crystal was grown from ethyl methyl ketone solvent by the solution growth technique. Single and powder X-ray diffraction analyses reveals that the grown crystal belongs to monoclinic crystal system with noncentrosymmetric space group ‘P2₁’ and it has good crystalline nature. Functional groups and molecular structure of the title compound were confirmed by FTIR and ¹H NMR respectively. The UV–Vis–NIR absorption study reveals no absorption in the visible region and the cut-off wavelength was found to be at 412.84 nm, TG/DTA, mass spectral analysis, photoluminescence and microhardness studies have been carried out for the grown crystals and results are discussed in detail. The second harmonic efficiency of the IONS was determined by Kurtz–Perry powder technique which reveals that the IONS crystal (3.1 V) has greater efficiency i.e., 143 times to that of KDP (21.7 mV).     

Synthesis and characterization of the open-framework cobalt borophosphate: (C4N2H12)Co[B2P3O12(OH)]

A high yield hydrothermal synthesis of the open-framework cobalt borophosphate (C₄N₂H₁₂)Co[B₂P₃O₁₂(OH)], has been developed. The compound was characterized by single crystal X-ray diffraction methods, thermogravimetric analysis, vibrational (IR and Raman) spectroscopy and magnetic measurements. In the structure Co(II)O₆ octahedra, BO₄ and PO₄ tetrahedra form nine-member rings which in turn are linked to form CoBPO layers parallel to the bc plane. The layers are joined together by another set of PO₄ tetrahedra and the (piperazinium)²⁺ cations occupy the channels running along [1 0 0]. The structure is compared with that of (C₂N₂H₁₀)Co[B₂P₃O₁₂(OH)].     

The mechanism of long phosphorescence of SrAl2−xBxO4 (0<x<0.2) and Sr4Al14−xBxO25 (0.1<x<0.4) co-doped with Eu and Dy

The role of B₂O₃ in realizing the long phosphorescence of Eu(II)+Dy(III) doped strontium aluminates has been investigated. IR and solid state MAS NMR spectra show the incorporation of boron as BO₄ in the AlO₄ framework of SrAl₂O₄ and Sr₄Al₁₄O₂₅. Phosphor, made free of glassy phases by washing with hot acetic acid+glycerol, did not show any photoconductivity under UV irradiation, indicating that the mechanism involving hole conduction in valence band is untenable for long phosphorescence. EPR studies confirm the presence of both electron and hole trap centers. Dy³⁺ forms substitutional defect complex with borate; [Dy-BO₄-V_Sr]²⁻, and acts as a hole trap center. The electron centers are formed by the oxygen vacancies associated with BO₃³⁻, i.e. [BO₃-V_O]³⁻. Under indigo light or near UV irradiation, the photoinduced electron centers are formed as [BO₃-V_O(e′)]⁴⁻. The holes are released from [Dy-BO₄-V_Sr(h)]¹⁻ under thermal excitation at room temperature. The recombination of electrons with holes releases energy which is expended to excite Eu²⁺ to induce long phosphorescence.     

Synthesis and crystal sructure of a new dihydrogenomonophosphate (4-C2H5C6H4NH3)H2PO4

Chemical preparation, crystal structure, calorimetric, and spectroscopic investigations are given for a new organic-cation dihydrogenomonophosphate, (4-C₂H₅C₆H₄NH₃)H₂PO₄ in the solid state. This compound crystallizes in the orthorhombic space group Pbca with the following unit cell parameters: a=8.286(3) Å, b=9.660(2) Å, c=24.876(4) Å, Z=8, V=1991.2(7) Å³, and D_X=1.442 g cm⁻³. Crystal structure was solved with a final R=0.054 for 3305 independent reflections. The atomic arrangement coaled described as H₂PO₄⁻ layers between which are located the 4-ethylanilinium cations.     

A facile soft template synthesis and characterization of PbHAsO4 nanocrystals

Monoclinic lead hydrogen arsenate (LHA) nanocrystals with different crystallization morphologies and crystallite sizes were prepared successfully by a soft template synthesis method in the presence of sodium dodecylbenzenesulfonate (SDBS) or polyvinylpyrrolidone (PVP). The products were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The possible mechanism of SDBS and PVP in the experiment was briefly illustrated.     

Preparation of nitrogen doped TiO2 photocatalyst by oxidation of titanium nitride with H2O2

Nitrogen doped anatase TiO₂ (N-TiO₂) were prepared by hydrothermally treating TiN with H₂O₂. The as-synthesized samples were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), UV-vis diffuse reflectance spectrum (DRS), Fourier transform infrared spectra (FT-IR) and X-ray photoelectron spectroscopy (XPS) techniques. The results confirmed that the hydrothermal oxidation is an effective method to prepare N-doped TiO₂ anatase. The nitrogen concentration in TiO₂ could be controlled by the concentration of H₂O₂ solution. Photocatalytic degradation of methyl orange (MO) was carried out under visible light and UV-visible light irradiation, respectively. The as-prepared optimal N-TiO₂ showed higher photocatalytic activity than N-P25 and P25, and exhibited excellent reusability.     

Crystal structure, thermal analysis and IR spectroscopic investigation of (C6H9N2)H2XO4 (X = As, P)

Crystals of 2-amino-4-methylpyridinium dihydrogenmonoarsenate (C₆H₉N₂)H₂AsO₄ and 2-amino-4-methylpyridinium dihydrogenmonophosphate (C₆H₉N₂)H₂PO₄ have been prepared and grown at room temperature. These materials are isotypic with the following unit cell dimensions (C₆H₉N₂)H₂AsO₄: a = 12.4415(5) Å, b = 6.8224(3) Å, c = 11.3524(5) Å, Z = 4, V = 963.60(6) Å³; (C₆H₉N₂)H₂PO₄: a = 12.4410(9) Å, b = 6.7165(3) Å, c = 11.3417(5) Å, Z = 4, V = 925.09(10) Å³. The common space group is Pnma. The structure of these compounds has been determined by X-ray data collection on single crystals of (C₆H₉N₂)H₂AsO₄ and (C₆H₉N₂)H₂PO₄. Due to the strong hydrogen-bond network connecting the H₂XO₄ groups, the anionic arrangement must be described as a linear organization. The chains composed by the macroanion spread along the b-direction, approximately centered by x = 0 and 1/2. All atoms of the structure, except one oxygen atom, are located in the mirror planes situated at y = 1/4 and 3/4, imparting an internal mirror symmetry to the anionic and the cationic entities. The linear macroanions are crossed by organic cations lying in mirrors perpendicular to the b-direction; this atomic arrangement is then described by a three-dimensional network of hydrogen bonds, built up by two types, O–HO bonds inside the chains and N–HO bonds linking adjacent chains. The thermal properties of both compounds are investigated as well as the IR properties supported by group theoretical analyses.     

(Na4BH4) guests inside aluminosilicate, gallosilicate and aluminogermanate sodalite host frameworks studied by H, B, and Na MAS NMR spectroscopy

We report tetrahydroborate aluminosilicate, gallosilicate and aluminogermanate sodalites studied by ¹¹B, ¹H and ²³Na MAS NMR spectroscopy. The spectral parameters are consistent with the local environments of each investigated nucleus obtained from the crystal structures. The ¹¹B MAS NMR spectra exhibit a sharp narrow line at about −49.0 ppm, which is assigned to BH₄⁻ enclathrated into the sodalite framework matrix. The lineshape of the signal shows no quadrupolar interactions due to discreteness and high symmetry of the BH₄⁻ unit as well as possible fast dynamic site exchange of hydrogen atoms. The ²³Na MAS NMR signals also show a narrow Gaussian lineshape, which clearly indicates a single type of sodium coordination, and a centrosymmetrical charge distribution around the sodium atom. The ¹H MAS NMR spectra can clearly distinguish between hydrogen in BH₄⁻ anions (−0.6 ppm), H₃O₂⁻ anions (1.2 ppm) and H₂O molecules (5.0 ppm). The structural properties of BH₄⁻ intercalation into sodalite framework matrix help connect the microporous materials to hydride-containing A, X and Y type zeolites.     

Crystal structure and characterization of [2,5-(CH3O)2C6H3NH3]4P4O12·2H2O

The preparation, crystal structure, TG–DTA analysis and spectroscopy investigation are reported for the 2,5-dimethoxy phenyl ammonium cyclotetraphosphate dihydrate [2,5-(CH₃O)₂C₆H₃NH₃]₄P₄O₁₂·2H₂O. This new compound is triclinic P with unit cell dimensions: a = 7.438(5) Å, b = 11.841(7) Å, c = 12.354(4) Å,  = 96.61(4)°, β = 98.35(4)°, γ = 102.60(6)°, Z = 1 and V = 1038.0(1) Å³. Its crystal structure has been determined and refined to R = 0.049, with 5128 independant reflections. The structure can be described by rows of P₄O₁₂ ring anions along the a axis; between these rows are located the organic groups, connected to them by hydrogen bonds.