失真自适应接收机技术及信号形式选择

对流层散射信道是一种典型的多径衰落信道,多径传播造成了信号的深衰落和多径扩散。而多径扩散现象的存在,会使速率高、码元窄、频谱宽的信号遭受频率选择性衰落的影响,造成传输中的信号码元之间产生码间干扰,严重影响信息传输质量。在此提出了一种基于失真自适应接收技术和3/4占空半余弦信号形式的数字接收机方案,能够自适应地跟踪失真信号的变化而进行最佳相干接收,使系统具有稳定的通信性能。     

通信系统中多径衰落信道传输性能的改进

通信系统中多径衰落信道传输性能的改进是当前比较热门的研究课题.我国的通信系统中多径衰落信道传输性能还存在严重的劣势,还存在着诸多有待解决的问题.在实用瑞利衰落信道下,存在加性高斯白噪声,对直接序列扩频通信系统抑制码片内、外多径干扰的能力进行理论分析与计算机仿真.在多径衰落信道较强的条件下,与提高扩频增益相比,增加扩频码的码长对于提高移动通信系统的抗多径衰落性能更加有效,但是扩频增益并非越高越好,需合理选取;证实扩频通信系统在多径瑞利衰落信道中传输时能有效地克服多径衰落.本文简要分析了瑞利衰落信道模型,并深入的研究和探讨了扩频通信系统抗多径干扰性能.     

混沌扩频通信系统在多径Rayleigh衰落信道中的性能分析

本文研究了混沌直接扩频信号在多径Rayleigh衰落信道中传输时的抗多径干扰和多址干扰的特性。对于所给出的混沌扩频通信系统,当加入多径干扰和信道噪声时,给出了理论误码率与实际误码率的比较,数值结果表明在多径衰落信道中,混沌扩频通信系统抗多径干扰的性能很好;同时对混沌直接扩频信号的奇、偶互相关函数进行了计算,结果表明混沌扩频通信系统具有良好的抗多址干扰能力。     

CDMA2000 1xEV-DO前向链路符号级迭代多用户检测器

1xEV-DO[1]是CDMA2000 1x针对数据业务的增强系统.为提高数据传输速率,其前向链路用16个并行的码道传输调制符号,各码道由正交码-Walsh码隔离.但是这种正交性却被多径衰落信道破坏,产生了多码道干扰[2],严重影响了系统在高速传输数据时的性能.本文在1xEV-DO前向链路中引入了一种符号级迭代多用户检测器,用于消除多码道干扰.仿真结果表明,符号级迭代多用户检测器的性能好于Rake接收机和码片级均衡器,能够较好地解决系统在多径衰落信道中高速数据传输的问题.     

多径信道下基于空时分组码的发送分集技术

文章在多径信道下,提出了一种基于RAKE接收机的空时分组编码(STBC)方案.该方案将空时分组编码(STBC)与RAKE接收机的多径叠加相干检测的方法相结合,从而可以在频率选择性衰落信道下采用多发射天线实现发送分集.此方案获得的分集增益与由采用相同数量接收天线的最大比接收合并(MRRC)方案得到的接收分集增益接近,能够较大地提高传榆系统的可靠性.     

频率复用DS/CDMA系统中自适应盲多用户检测的一种方法

该文给出一种工作于强窄带干扰(NBI)多径衰落信道中DS/CDMA系统盲多用户检测接收机模型。它具有RAKE接收机的基本结构,在每一条并行支路中利用MMSE准则跟踪各路径信号。因此具有抗多径衰落,同时抑制NBI和多址接入干扰(MAI)的能力。模拟结果证明,它的性能优于未考虑NBI抑制的多用户检测接收机。     

多径信道下辅助矢量接收机性能分析

研究了在直接序列码分多址(DS-CDMA)系统中,多径环境下一种基于RAKE结构的辅助矢量接收机。该接收机在收集多径信号的同时抑制系统中的多址干扰,从收集的多径信号中估计出信道响应矢量,并利用估计出的信道响应矢量对多径信号进行合并,最后进行判决。仿真结果表明,辅助矢量接收机能够有效地去除DS-CDMA系统中的多址干扰,同时具备良好的抗多径衰落性能,误码性能明显优于RAKE接收机。     

基于Simulink的OFDM系统仿真分析

无线衰落信道使得通信系统在传输过程中出现符号间干扰和信道间干扰,严重影响通信质量。正交频率分割复用(OFDM)是一种多载波数字调制技术,他在无线多径衰落信道下却具有较好的传输特性,对其抗多径衰落的原理进行了研究。在Simulink下建立了系统的仿真模型,并对所建模型进行了分析。同时在两径和六径瑞利衰落信道以及系统中有无交织下对其进行仿真,给出了仿真结果。     

多址通信

0217989采用多级并行干扰抵消算法的 CDMA 系统抗多径性能分析[刊]/韦惠民//西安电子科技大学学报.—2002,29(2).—241～244(L)采用 RAKE 接收机和横向滤波器的多级并行干扰抵消算法,应用于存在多径衰落时码分多址系统。建立了系统信号模型,采用改进的误码率计算公式,给出计算机仿真结果。参2     

可见光通信OFDM系统抗多径干扰性能研究

研究可见光通信OFDM系统在多径衰落信道中的传输性能.分别使用16-QAM和OFDM调制对声音和文本信源在多径衰落信道中进行传输,比较不同调制方式的传输效果.传输文本文件时,分析了误码率随衰落系数以及路径时延变化的关系.结果表明:可见光通信OFDM系统在多径衰落信道中传输,能克服多径效应,降低误码率,获得较为满意的通信质量.     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Teleportation of an arbitrary unknown N-qubit entangled state under the controlling of M controllers

A new quantum protocol to teleport an arbitrary unknown N-qubit entangled state from a sender to a fixed receiver under M controllers(M < N) is proposed. The quantum resources required are M non-maximally entangled Greenberger-Home-Zeilinger (GHZ) state and N-M non-maximally entangled Einstein-Podolsky-Rosen (EPR) pairs. The sender performs N generalized Bell-state measurements on the 2N particles. Controllers take M single-particle measurement along x-axis, and the receiver needs to introduce one auxiliary two-level particle to extract quantum information probabilistically with the fidelity unit if controllers cooperate with it.     

Diode-end-pumped Nd:YVO4/LBO lasers with 4.2W continuous-wave output at 457 nm

A continuous-wave (CW) 457 nm blue laser operating at the power of 4.2 W is demonstrated by using a fiber coupled laser diode module pumped Nd: YVO4 and using LBO as the intra-cavity SHG crystal With the optimization of laser cavity and crystal parameters, the laser operates at a very high efficiency. When the pumping power is about 31 W, the output at 457nm reaches 4.2 W, and the optical to optical conversion efficiency is about 13.5% accordingly. The stability of the out putpower is better than 1.2% for 8 h continuously working.     

Call for Papers

正Wireless Body-area Networks The last decade has witnessed the convergence of three giant worlds:electronics,computer science and telecommunications.The next decade should follow this convergence in most of our activities with the generalization of sensor networks.In particular with the progress in medicine,people live longer and the aging of population will push the development of wireless personal networks     

Call for Papers—Feature Topic,Vol.12,No.7,2015

正Information Centric Networking Information-Centric Networking(ICN) is an emerging direction in Future Internet architecture research,gaining significant tractions among academia and industry.Aiming to replace the conventional host-to-host communication model by a data-centric model,ICN treats data content as the first