Membrane Extraction of Ag(I), Co(II), Cu(II), Pb(II), and Zn(II) Ions with Di(2-Ethylhexyl)phosphoric Acid under Conditions of Electrodialysis with Metal Electrodeposition

Theoretical Foundations of Chemical Engineering - New methods for extracting cobalt and zinc ions from sulfuric acid solutions, of silver and lead ions from nitric acid solutions, and of copper...     

Adsorption of Cd(II), Pb(II), and Ag(I) in aqueous solution on hollow chitosan microspheres

Cross‐linked chitosans synthesized by the inverse emulsion cross‐link method were used to investigate adsorption of three metal ions [Cd(II), Pb(II), and Ag(I)] in an aqueous solution. The chitosan microsphere, was characterized by FTIR and SEM, and adsorption of Cd(II), Pb(II), and Ag(I) ions onto a cross‐linked chitosan was examined through analysis of pH, agitation time, temperature, and initial concentration of the metal. The order of adsorption capacity for the three metal ions was Cd²⁺ > Pb²⁺ > Ag⁺. This method showed that adsorption of the three metal ions in an aqueous solution followed the monolayer coverage of the adsorbents through physical adsorption phenomena and coordination because the amino (? NH₂) and/or hydroxy (? OH) groups on chitosan chains serve as coordination sites. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Conductometric studies of Mn(II), Co(II), Ni(II), Cu(II) and Zn(II) tetrafluoroborates in N,N—dimethylacetamide solutions

Results are reported for the molar conductivities at 25°C of N,N—dimethylacetamide (DMA) solutions of Bu₄NBF₄ and Mn(II), Co(II), Ni(II), Cu(II) and Zn(II) tetrafluoroborates. The limiting molar conductivities of [M(DMA)₆]²⁺ (M  MN, Co, Ni, Cu, Zn) and BF^?₄, as well as association constants for Co(BF₄)₂ in DMA solutions have been calculated. The slight differences between conductometric curves of different metal ions are discussed.     

Antibacterial Co(II), Cu(II), Ni(II) and Zn(II) Complexes of Thiadiazoles Schiff Bases

Schiff bases were obtained by condensation of 2-amino-l,3,4-thiadiazole with 5-substituted-salicylaldehydes which were further used to obtain complexes of the type [M(L)(2)]Cl(2), where M=Co(II), Cu(II), Ni(II) or Zn(II). The new compounds described here have been characterized by physical, spectral and analytical data, and have been screened for antibacterial activity against several bacterial strains such as Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa. The antibacterial potency of these Schiff bases increased upon chelation/complexation, against the tested bacterial species, opening new aproaches in the fight against antibiotic resistant strains.     

Adsorption of thiophene and toluene on NaY zeolites exchanged with Ag(I), Ni(II) and Zn(II)

The present study evaluates the adsorption capacity of thiophene and toluene and their competitive behaviour on zeolite NaY exchanged with transition metals (5 wt% Ni, Zn and Ag). The headspace chromatography technique was used to obtain monocomponent apparent adsorption isotherms of thiophene and toluene with NaY, NiY, ZnY and AgY using isooctane as an inert solvent at 30 and 60 °C. Selectivity between toluene and thiophene at saturation capacities were also measured at 30 °C. The adsorption capacity for thiophene increased for the studied adsorbents as follows: NaY < ZnY < NiY < AgY at 30 °C and NaY < NiY < ZnY < AgY at 60 °C. Toluene is less adsorbed, but within the same order of magnitude as thiophene and following the same sorbent order. All adsorbents were moderately selectivity for toluene. Nevertheless, the sulfur content was successfully reduced in the presence of aromatics and olefins in immersion tests with a model fuel mixture. These results show the importance of inserting transitions metals in the zeolitic structure to enhance the adsorption of both aromatic and sulfur containing compounds in organic liquid mixtures, which shows promise to meet environmental standards in transportation fuels.     

Preconcentration and matrix elimination for the determination of Pb(II), Cd(II), Ni(II), and Co(II)by 8‐hydroxyquinoline anchored poly(styrene‐divinylbenzene) microbeads

Poly(styrene-divinylbenzene), PS-DVB, microbeads were modified with 8-hydroxyquinoline (8-HQ) following nitration, reduction of  NO₂ to NH₂, and conversion of NH₂ to diazonium salt. Characterization of pristine,  NO₂,  NH₂,  NN⁺Cl⁻, and 8-QH functional groups modified microbeads was made by Fourier transform-infrared spectrometry (FTIR) and porosimetry. Total reflectron-X-ray florescence spectrometer (TXRF) was used to test the affinity of the 8-HQ modified microbeads to toxic metal ions. 8-HQ-modified microbeads were used to examine the adsorption capacity, recovery, preconcentration, and the matrix elimination efficiency for Pb(II), Cd(II), Ni(II), and Co(II) ions as a function of changing pH, initial metal-ion concentrations, and also equilibrium adsorption time of the studied metal ions. Preconcentration factors for the studied toxic metal ions were found to be more than 500-fold and recovery between 93.8% and 100.6%. Ultratrace toxic metal-ion concentrations in sea water were determined easily by using modified microbeads. Reference sea-water sample was used for the validation of the method, and it was found that recovery, preconcentration, and the matrix elimination were performed perfectly. For the desorption of the toxic metal ions, 3M of HNO₃ was used and desorption ratio shown to be more than 96%. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Adsorption of Cr(III), Ni(II), Zn(II), Co(II) ions onto phenolated wood resin

In this study, phenolated wood resin was used an adsorbent for the removal of Cr(III), Ni(II), Zn(II), Co(II) ions by adsorption from aqueous solution. The adsorption of metal ions from solution was carried at different contact times, concentrations and pHs at room temperature (25°C). For individual metal ion, the amount of metal ions adsorbed per unit weight of phenolated wood resin at equilibrium time increased with increasing concentration and pH. Also, when the amounts of metal ions adsorbed are compared to each other, it was seen that this increase was order of Cr(III) > Ni(II) > Zn(II) > Co(II). This increase was order of Cr(III) > Ni(II) > Co(II) > Zn(II) for commercial phenol–formaldehyde resin. Kinetic studies showed that the adsorption process obeyed the intraparticle diffusion model. It was also determined that adsorption isotherm followed Langmuir and Freundlich models. Adsorption isotherm obtained for commercial phenol–formaldehyde resin was consistent with Freundlich model well. Adsorption capacities from Langmuir isotherm for commercial phenol–formaldehyde resin were higher than those of phenolated wood resin, in the case of individual metal ions. Original adsorption isotherm demonstrated the monolayer coverage of the surface of phenolated wood resin. Adsorption kinetic followed the intraparticle diffusion model. The positive values of ΔG° determined using the equilibrium constants showed that the adsorption was not of spontaneous nature. It was seen that values of distribution coefficient (K_D) decreasing with metal ion concentration in solution at equilibrium (C_e) indicated that the occupation of active surface sites of adsorbent increased with metal ions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2838–2846, 2006     

Removal of Cd(II), Pb(II), Cu(II) and Ni(II) from water using modified pine bark

This paper describes the removal of Cd(II), Pb(II), Cu(II), and Ni(II) ions from aqueous solutions using chemically modified pine barks (Pinus nigra). In this article, effects of chemical modification methods on the adsorption capacity have been investigated. Changes of the surface properties were examined by the FTIR, SEM and zeta potential analyses. HCl, NaOH, Fenton reactive, polymerization, acetone, ethanol, chloroform, tetra ethylene glycol, diethyl ether and glycol were used for modification processes. Maximum adsorption capacities were obtained by modification with NaOH (13-20 mg/g), Fenton (12-17 mg/g) and polymerization (12-16.5 mg/g). These modification processes also decreased Chemical Oxygen Demand of water from 1820 mg/L for raw pine barks to 35 mg/L for NaOH modified barks. Adsorption capacities of adsorbents increased from 2 mg/g to 20 mg/g as a result of modification that accordingly increase adsorbent surface activity.     

A new method for the simultaneous determination of Fe(III), Cu(II), Pb(II), Zn(II), Cd(II), and Ni(II) in wine using differential pulse polarography

A new and simple differential pulse polarographic method for the analysis of wine has been established. With this method, it was possible to determine simultaneously six trace elements in wine. There was no need for time consuming extraction and separation procedures with danger of contamination. The polarogram of wet digested wine was taken initially in pH 2 acetate buffer and Pb, Cd, and Zn were determined by standard additions. Ethylene diamine tetraacetic acid (EDTA) was added and pH was increased to six by addition of NaOH. Fe and Cu were determined subsequently. The ammonia buffer, pH 9.5, was identified as the best medium for separation and determination of Ni and Zn. The quantities of trace elements were found as Cu 290 ± 20 μg L⁻¹, Fe 8960 ± 50 μg L⁻¹, Pb 148 ± 17 μg L⁻¹, Cd 16 ± 8 μg L⁻¹, Zn 460 ± 25 μg L⁻¹, and Ni 78 ± 17 μg L⁻¹.     

Evaluation of sorption behavior of polymethylene-bis(2-hydroxybenzaldehyde) for Cu(II), Ni(II), Fe(III), Co(II) and Cd(II) ions

Poly[5,5??-methylene-bis(2-hydroxybenzaldehyde)1,2-phenylenediimine] resin was prepared and characterized by employing elemental, thermal analysis, FTIR, and UV?Cvisible spectroscopy. The metal uptake behavior of synthesized polymer towards Cu(II), Co(II), Ni(II), Fe(III) and Cd(II) ions was investigated and optimized with respect to pH, shaking speed, and equilibration time. The sorption data of all these metal ions followed Langmuir, Freundlich, and Dubinin?CRadushkevich isotherms. The Freundlich parameters were computed 1/n?=?0.31?±?0.02, 0.3091?±?0.02, 0.3201?±?0.05, 0.368?±?0.04, and 0.23?±?0.01, A?=?3.4?±?0.03, 4.31?±?0.02, 4.683?±?0.01, 5.43?±?0.03, and 2.8?±?0.05?mmol?g^?1 for Cu(II), Co(II), Ni(II), Fe(III), and Cd(II) ions, respectively. The variation of sorption with temperature gives thermodynamic quantity (??H) in the range of 36.72?C53.21?kJ/mol. Using kinetic equations (Morris?CWeber and Lagergren equations), values of intraparticle transport and the first-order rate constant was computed for all the five metals ions. The sorption procedure is utilized to preconcentrate these ions prior to their determination by atomic absorption spectrometer. It was found that the adsorption capacity values for metal-ion intake followed the following order: Cd(II)?>?Co(II)?>?Fe(III)?>?Ni(II)?>?Cu(II).     

Synthesis and characterization of antibacterial polychelates of urea–formaldehyde resin with Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), and Zn(II) metal ions

We studied the reaction between urea and formaldehyde with the purpose of preparing new polychelates of Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), and Zn(II) metal ions. These compounds were characterized by elemental analysis, IR spectroscopy, ¹H‐NMR, electronic spectroscopy, thermogravimetric analysis (TGA), and molar conductance measurements. The percentage of metal in all of the polychelates was found to be consistent with 1:1.5 (metal/ligand) stoichiometry. The thermal behaviors of these coordination polymers were studied by TGA in a nitrogen atmosphere up to 750°C. The TGA results reveal that the complexes had higher thermal‐resistance properties compared to the common urea–formaldehyde resin. The molar conductivity and magnetic susceptibility measurements of the synthesized polychelates confirmed the geometry of the complexes. The antibacterial activity of the polychelates was also investigated with agar diffusion methods. The antibacterial activity of these polychelates was found to be reasonably good compared with standard drugs, namely, ciprofloxacin, ampicillin, and kanamycin. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 928–936, 2006     

A first report of the complexes of 5,11,17,23-tetra-tert-butyl-25,27-diethoxycarboxymethoxy-26,28-dihydroxycalix[4]arene with Mn(II), Fe(III), Co(II), Ni(II), Cu(II) and Zn(II)

Totally six dinuclear complexes of Mn(II), Fe(III), Co(II), Ni(II), Cu(II) and Zn(II) of calix[4]arene derivatized with two pendants possessing terminal –COOH functions at two of its alternate phenolic –OH groups were synthesized for the first time and were well characterized.     

Search for Optimum Conditions of Extraction of Transition Metal Complexes with Alkylimidazoles. I. Extraction of the Co(II), Ni(II), and Zn(II) Complexes of 1-Methylimidazole and of the Co(II) and Zn(II) Complexes of 2-Methylimidazole

Abstract

It has been shown that for the Co(II), Zn(II), and Ni(II) complexes of 1-methylimidazole and for the Co(II) and Zn(II) complexes of 2-methylimidazole, the partition coefficient D between the aqueous and organic phases is proportional to the degree of formation α _n of a definite complex. Tetrahedral species have been found to be extracted with the Co(II) and Zn(II) complexes of 2-methylimidazole and with the Zn(II) complexes of 1-methylimidazole.     

Synthesis, Crystal Structure, Fluorescence and Thermostability of Ni(II), Zn(II), Cd(II) Complexes with Schiff Base 2-Acetylpyridine-d-tryptophan

Three novel transition metal coordination polymers, [Ni(C₁₈H₁₆N₃O₂)₂·2CH₃OH] _n (1), [Zn(C₁₈H₁₆N₃O₂)₂·4CH₃OH] _n (2) and [Cd(C₁₈H₁₆N₃O₂)₂·2CH₃OH] _n (3) (C₁₈H₁₆N₃O₂=2-acetylpyridine-d-tryptophan) were synthesized and characterized by elemental analysis, IR, UV, ¹H NMR and X-ray diffraction single crystal analysis. The analyses of the structures indicate that all three materials crystallize in the tetragonal crystal system, space group P4₁2₁2. They have similar structures; i.e., the Schiff base coordinates in its deprotonated form and behaves as a hexadentate (4N+2O) coordinated ligand to form a distorted octahedron geometry. On the other hand, as a result of the alternate arrangement of chains through N–H···O intermolecular hydrogen bonds interactions, 2-D layers are formed for the three complexes. Furthermore, the luminescent properties and thermal stabilities of the three complexes were investigated.     

Synthese und Reaktivität von tert-Butyl-(2-aryl-3-methyl-but-2-yl)-peroxiden

Synthesis and Reactivity of tert-Butyl-(2-aryl-3-methyl-but-2-yl) Peroxides tert-Butyl-(2-aryl-3-methyl-but-2-yl) peroxides (2a–d) were prepared from t-BuOOH and corresponding 2-aryl-methyl-butan-2-ols (1a–d) (Ar:p-MeO C₆H₄ (a) ; Ph (b) ; p-Cl C₆H₄ (c) ; m-CF₃ C₆H₄ (d) ) and characterized by NMR, MS and elemental analysis. Kinetic data for the thermolysis of 2a–d in cumene as the solvent were determined at 110–140 °C and the products analyzed. The rate constants satisfy the Hammett equation with σ giving a ρ-value of −0.73. Oxidation of 2a–d at 80 °C gives the corresponding acetophenones 4 , epoxides 6 and hydroperoxides 8 . The products of the oxidation of 2a–2d were analysed after reduction of the reaction mixtures with LiAlH₄. Relative reactivities of the tertiary C H bonds of peroxides 2 were determined by competitive oxidations. They amount to 0.115–0.275 (with respect to the tertiary C H bond of cumene)     

Konstitution und Redoxstabilität von Kupfer(II)-Komplexen mit substituierten Hydrazinen

Constitution and Redox Stability of Copper(II)-Complexes with Substituted Hydrazines CuCl₂ reacts with substituted hydrazines forming chelates of the Cu^IIL₂Cl₂ type (L = RCONHNH₂, RCONHN(C₆H₅)₂, RCONHNHCOR, H₂NNHCO(CH₂)_nCONHNH₂) which are characterized by quantitative analysis, i.r. and e.p.r. spectra. The complex polyhedron exhibits the geometry of a tetragonally distorted octahedron of C_2v symmetry. The complexes undergo intramolecular redox decomposition in acetonitril forming Cu(I) species. The rate constants increase with decreasing half wave oxydation potential and decreasing Homo energy of the hydrazine ligands, respectively.     

Synthesis, Characterization and Biological Evaluation of Co(II), Cu(II), Ni(II) and Zn(II) Complexes With Cephradine

Some Co(II), Cu(II), Ni(II) and Zn(II) complexes of antibacterial drug cephradine have been prepared and characterized by their physical, spectral and analytical data. Cephradine acts as bidentate and the complexes have compositions, [M(L)(2)X(2)] where [M = Co(II), Ni(II) and Zn(II), L = cephradine and X = Cl(2)] showing octahedral geometry, and [M(L)(2)] where [M = Cu(II), L = cephradine] showing square planar geometry. In order to evaluate the effect of metal ions upon chelation, eephradine and its complexes have been screened for their antibacterial activity against bacterial strains, Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa.     

Removal Characteristics of Cd(II), Cu(II), Pb(II), and Zn(II) by Natural Mongolian Zeolite through Batch and Column Experiments

The removal characteristics of Cd(II), Cu(II), Pb(II), and Zn(II) from model aqueous solutions by 5 natural Mongolian zeolites were investigated. The adsorption of metals on zeolites reached a plateau value within 6 h. The adsorption kinetic data were fitted with adsorption kinetic models. The equilibrium adsorption capacity of the zeolites was measured and fitted using Langmuir and Freundlich isotherm models. The order of adsorption capacity of zeolite was Pb(II) > Zn(II) > Cu(II) > Cd(II). The maximum adsorption capacity of natural zeolite depends on its cation exchange capacity and pH. The leaching properties of metals were simulated using four leaching solutions. The results show that natural zeolite can be used as an adsorbent for metal ions from aqueous solutions or as a stabilizer for metal-contaminated soils.     

Synthesis and properties of chelate polymers of Cu(II), Ni(II), Co(II), Mn(II) and Zn(II) with a schiff's base of 5,5′-methylene-bis(3,3′-dinitrosalicylaldehyde) with 1,6-hexanediamine

The synthesis, characterization and coordination aspects of the title polymer ligands are reported. The polymeric chelates were prepared by polycondensations of transition metal ions (M) with a poly(Schiff's base) (L). The analytical data propose a (ML)_n formula for the chelates. All the polychelates are stable and insoluble in common organic solvents. The geometry around the central metal ion in each chelate is proposed on the basis of measurements of magnetic susceptibilities and UV reflectance spectra. The ligand field splitting parameters 10 Dq, the interelectronic repulsion parameter B, the nephelauxetric parameter β and ligand field splitting energies (L.F.S.E.) have been calculated for Ni(II) and Co(II) chelates. All chelates are resistant to moderately concentrated acids and dilute alkalies at ambient temperature. They exhibit thermal stabilities to varying degrees. IR spectra show that the ligand usually coordinates via the carbonyl oxygen (C=O) and the phenolic OH with replacement of hydrogen by metal ions.