基于模糊树模型的间接自适应模糊控制

提出了一种基于模糊树模型的间接自适应模糊控制器的设计方法. 采用模糊树辨识方法离线辨识系统中的未知非线性函数, 得到初始的控制器, 然后在线调节模糊树模型中的线性参数, 改善控制器的性能, 实现对有界参考信号的跟踪控制. 通过对倒立摆系统进行数值仿真, 验证了所提方法的有效性和优越性.     

Novel observer/controller identification method-based minimal realisations in block observable/controllable canonical forms and compensation improvement

This paper proposes a novel observer/controller identification method for identifying the minimally realised equivalent (reduced-order) mathematical models in the block observer/controller-canonical forms of the unknown (i) open-loop system, (ii) existing feedback/feedforward controllers and/or (iii) observer, based on available measurements of the operating closed-loop system. By skipping the singular value decomposition procedure and without involving the model conversion of the identified model from the general coordinate into the block observer/controller-canonical forms during the identification process, the proposed method is able to directly realise the identified parameters in the minimally realised block observer/controller-canonical forms. This simplifies the system identification process. The new procedures enable us to enhance the computational aspects of designing self-tuning controllers for online adaptive control of (a class of) multivariable systems and to improve the tracking performance considerably. As a result, the newly proposed compensation improvement approach is able to compensate the undesirable operating controller.     

基于观测器的非线性网络控制系统容错控制

研究了一类基于观测器的非线性连续网络控制系统容错控制器设计问题.针对传感器采用时间驱动方式,控制器和执行器均采用事件驱动方式的网络控制系统,设计了观测器,建立了基于状态观测器的增广闭环系统模型.利用线性矩阵不等式和自由权矩阵的方法,推导出闭环系统渐近稳定的充分条件,给出了观测器和容错控制器协同设计的方法.实例仿真证明了所用方法的有效性.     

Application of the observer/Kalman filter identification method to unknown time-delay disturbed systems and the associated optimal digital tracker design

ABSTRACT

Many practical systems are described as unknown multi-input-multi-output (MIMO) time-delay systems with unknown disturbances. The properties and performance of multi-time-delay MIMO systems are quite different compared to delay-free systems, in particular if the time-delay is long. In addition, for practical implementation digital controllers are often required instead of analog controllers. This paper presents: (i) an overview of the mathematical modelling based on the observer/Kalman filter identification (OKID) method, with some insight on known/unknown MIMO systems; (ii) a study of the pole-zero maps of the identified delay-free system and the known/unknown time-delay system for various sampling periods; (iii) a development of the explicit pole-zero map of the sampled-data MIMO neutral system with multiple discrete and disturbed time delays; (iv) an utilisation of the OKID method for known/unknown time-delay sampled-data MIMO systems with unknown disturbances; (v) an extension of the existing equivalent-input-disturbance (EID) estimator, to determine a robust tracker for the unknown time-delay system with unknown disturbances; and (vi) an investigation on the unknown time-delay system with stable or unstable zeros to determine which traditional or customised tracker can be applied. In addition, simulation studies are performed on the relationship between pole-zero maps and delay times.     

Model Predictive Control of Nonlinear Systems： Stability Region and Feasible Initial Control

This paper proposes a new method for model predictive control (MPC) of nonlinear systems to calculate stability region and feasible initial control profile/sequence, which are important to the implementations of MPC. Different from many existing methods, this paper distinguishes stability region from conservative terminal region. With global linearization, linear differential inclusion (LDI) and linear matrix inequality (LMI) techniques, a nonlinear system is transformed into a convex set of linear systems, and then the vertices of the set are used off-line to design the controller, to estimate stability region, and also to determine a feasible initial control profile/sequence. The advantages of the proposed method are demonstrated by simulation study.     

一类线性时变系统的输出反馈控制

基于线性时不变系统能控能观标准型变换及非线性系统高增益观测器方法,本文研究了一类线性时变系统 的输出反馈控制问题. 通过引入时变的状态变量坐标变换,分别设计了线性时变系统的状态反馈控制器、状态观测器以及基于 状态观测器的输出反馈控制器. 进一步地,本文分别证明了观测器动态误差是渐近收敛于零的,而状态反馈控制器以及输出反馈控制器可以 保证闭环系统的渐近稳定性.     

约束多传感器线性系统的RMPC容错控制

针对一类约束多传感器线性故障系统,提出了一种基于鲁棒预测控制策略的容错控制方案．首先为多传感器线性系统设计了观测器,然后离线设计不变集列,使得时变的状态估计误差存在于相应的不变集列中,利用不变集的理论提出了一种新的故障检测的方法,最后基于鲁棒预测控制策略为故障系统设计了容错控制器,给出了闭环系统鲁棒稳定性的证明．仿真结果证明了方法的可行性。     

基于支持向量机的一类非线性系统预测控制

针对一类具有输出反馈耦合的离散非线性系统,将过程的非线性部分通过支持向量机转化为全局线性状态空间模型,并在目标函数中引入系统状态的变化,给出一种类似于离散PI最优调节器的新型预测控制器.该方法不需要在线辨识系统参数,因为系统的内模已转换成全局离线模型.由于引入了新的优化目标函数,该控制器的控制效果和鲁棒性优于仅考虑预测输出误差的传统预测控制器.仿真结果表明,它也优于经典离散PI最优调节器.     

约束时变不确定离散系统的输出反馈预测控制综合

研究多包描述系统的离线型输出反馈预测控制．已有一方法首先综合状态反馈预测控制，满足输入/ 状态约束；而在设计观测器时，不再考虑输入/ 状态约束．本文则首先给出观测器，并给出一组不等式条件使得真实状态、观测状态和观测误差都保持在同一个椭圆内部，以便采用线性矩阵不等式处理输入/ 状态约束．基此，本文离线计算一椭圆序列，每个椭圆对应一控制律和一观测器，而在线的实时控制律和观测器则从该序列中选择，使得闭环系统具有稳定性保证．仿真例子说明了本文方法的有效性．     

基于ESO的一类线性时变系统自学习滑模控制方法

针对一类线性时变系统的控制问题,提出了一种基于扩张状态观测器的自学习滑模控制方法。该方法首先设计了两种非线性光滑函数, 然后将两种光滑函数分别应用于扩张状态观测器和滑模趋近律的设计。为了进一步提高系统的自适应控制能力, 使用最速下降法对滑模控制器的增益参数进行自学习镇定。仿真结果表明了该控制方法不仅响应速度快、控制精度高, 而且有效解决了现有理论方法难以解决的问题, 因而是一种有效的不依赖于被控对象模型的LTV系统控制方法。     

Fault estimation and active fault-tolerant control for a class of nonlinear systems with actuator and sensor faults based on unknown input iterative learning

In this paper, fault estimation and active fault-tolerant control are studied for a class of nonlinear systems with simultaneous actuator and sensor faults, as well as unknown external disturbances. Firstly, the state equation of a class of nonlinear systems is transformed into an augmented system state equation by extending the sensor fault as an auxiliary state. Then, a novel fault estimation observer based on iterative learning with unknown inputs is designed to estimate the system state, as well as actuator and sensor faults. Subsequently, by using the fault estimation information, a dynamic output feedback active fault-tolerant control scheme is proposed to compensate for the influence of faults on the system. Lyapunov stability theory is used to prove the stability of the closed-loop system and the convergence of the fault estimation observer. The gain matrices of the fault estimation observer and fault-tolerant controller are obtained by solving linear matrix inequalities. Furthermore, the paper avoids the use of the $$ norm in the convergence proof of the conventional iterative learning algorithm, which reduces the amount of calculation in the derivation process. Finally, the effectiveness and accuracy of the proposed method are verified through simulation of the DC motor angular velocity system.     

一类非线性系统的输出反馈容错控制

针对一类非线性系统,研究了故障情况下基于输出反馈的容错控制问题．首先基于Zhang的自适应观测器和Lin的输出反馈控制律设计了正常系统的标称控制律,分析了该控制律的性能,并得到了故障发生后仍然采用该控制律时闭环系统状态有界的充分条件．在此基础上,设计了故障系统的容错控制律,证明了若发生的故障满足前述的充分条件,则故障系统在该容错控制律下稳定．数值仿真表明了该方法的有效性．     

含执行器故障的切换非线性系统的事件触发自适应模糊容错控制

本文研究在平均驻留时间约束下,一类含有执行器故障的切换非线性系统输出反馈自适应模糊事件触发容错控制问题.首先,建立了一个模态依赖的状态观测器估计不可测量状态.利用模糊逻辑系统来逼近未知项.其次,构建自适应模糊容错事件触发控制方案能够节省网络资源和数据传输.然后,通过构造多Lyapunov函数和平均驻留时间法,证明闭环系统所有状态半全局一致最终有界的同时排除了Zeno现象.最后,通过数值仿真验证该方法的有效性.     

含执行器故障的切换非线性系统的事件触发自适应模糊容错控制

本文研究在平均驻留时间约束下,一类含有执行器故障的切换非线性系统输出反馈自适应模糊事件触发容错控制问题.首先,建立了一个模态依赖的状态观测器估计不可测量状态.利用模糊逻辑系统来逼近未知项.其次,构建自适应模糊容错事件触发控制方案能够节省网络资源和数据传输.然后,通过构造多Lyapunov函数和平均驻留时间法,证明闭环系统所有状态半全局一致最终有界的同时排除了Zeno现象.最后,通过数值仿真验证该方法的有效性.     

Identification and Control of Multivariable Stochastic Feedback Systems

Abstract

This paper considers the problem of simultaneous identification and control of stochastic processes characterized by linear dynamic models with unknown systems parameter coefficients. Stochastic approximation is used to derive consistent identification algorithms for the case in which arbitrary feedback controls are present. These identification methods can also be used for determining the order of the system, if the latter is unknown, as well as the exact canonical structure for the multivariable case.

An approximation to the optimal control solution is obtained by explicitly separating the functions of identification and control, and asymptotic convergence to a stochastic optimal controller is attained without on-line structural modification.     

Active disturbance rejection control for nonlinear fractional‐order systems

This paper investigates active disturbance rejection control involving the fractional‐order tracking differentiator, the fractional‐order PID controller with compensation and the fractional‐order extended state observer for nonlinear fractional‐order systems. Firstly, the fractional‐order optimal‐time control scheme is studied to propose the fractional‐order tracking differentiator by the Hamilton function and fractional‐order optimal conditions. Secondly, the linear fractional‐order extend state observer is offered to acquire the estimated value of the sum of nonlinear functions and disturbances existing in the investigated nonlinear fractional‐order plant. For the disturbance existing in the feedback output, the effect of the disturbance is discussed to choose a reasonable parameter in fractional‐order extended state observer. Thirdly, by this observed value, the nonlinear fractional‐order plant is converted into a linear fractional‐order plant by adding the compensation in the controller. With the aid of real root boundary, complex root boundary, and imaginary boot boundary, the approximate stabilizing boundary with respect to the integral and differential coefficients is determined for the given proportional coefficient, integral order and differential order. By choosing the suitable parameters, the fractional‐order active disturbance rejection control scheme can deal with the unknown nonlinear functions and disturbances. Finally, the illustrative examples are given to verify the effectiveness of fractional‐order active disturbance rejection control scheme. Copyright © 2015 John Wiley & Sons, Ltd.     

基于传感器故障的网络化系统鲁棒容错设计

针对一类具有参数不确定的非线性网络化控制系统,基于T-S模糊模型建模,推证出了确保非线性网络化控制系统在传感器发生失效故障时具有鲁棒完整性的时滞依赖充分条件,并以求解矩阵不等式给出了容错控制器的设计方法.最后以一个仿真算例验证了文中所述方法的可行性和有效性.     

Hammerstein-Wiener nonlinear model based predictive control for relative QoS performance and resource management of software systems

Runtime management of Quality of Service (QoS) performance and resource provisioning is a vital issue in shared resource software environments. A useful performance management technique for such software systems is the relative guarantee feedback control scheme. The existing approaches for this class of control systems are mainly based on off-line linear or on-line model identification and control techniques, which tend to have performance issues in the presence of nonlinearities induced by this scheme. Instead of using such modeling techniques, this paper proposes a new approach for QoS performance management and resource provisioning by using an off-line identification of Hammerstein and Wiener nonlinear block structural model. Using the characteristic structure of the nonlinear model, a predictive feedback controller based on a gain schedule technique is incorporated in the design to achieve the performance objectives. The proposed approach is validated using experiments based on a prototype, demonstrating superior runtime QoS performance management and resource provisioning in a complex software system.     

LMI approach to robust unknown input observer design for continuous systems with noise and uncertainties

The full order robust unknown input observers for continuous systems are presented. The observers are designed for both linear and nonlinear systems considering both noise and uncertainties. First, an unknown input observer is designed for linear systems. The observer is derived based on linear matrix inequality (LMI) approach. Then the observer design problem is extended for a class of nonlinear systems whose nonlinear function satisfies the Lipschitz condition. The main advantage of these observers over the existing works on UIO design is that these can handle both noise and uncertainties simultaneously. The performance of the observers is demonstrated by applying it to the robust state estimation of single link robot arm.     

Simultaneous fault estimation and fault-tolerant tracking control for uncertain nonlinear discrete-time systems

This paper deals with simultaneous fault estimation and control for a class of nonlinear systems with parameter uncertainty, which is described by Takagi–Sugeno (T–S) fuzzy model with parameter uncertainties and unknown disturbance. In this paper, a fuzzy reference model is used to generate error dynamic for tracking control. By considering actuator fault as an auxiliary state vector, we construct an augmented error system and propose a fault estimator/controller to achieve simultaneous fault estimation and fault-tolerant tracking control. H_∞ approach is used in the design of estimator/controller to attenuate the effect of the unknown disturbance and parameter uncertainties. The design conditions are formulated into a set of linear matrix inequalities (LMIs), which can be efficiently solved. Finally, a pitch-axis nonlinear missile model is used to illustrate the effectiveness of the proposed method.