Poly(methyl methacrylate)/poly(ethylene glycol)/poly(ethylene glycol dimethacrylate) micelles: Preparation,characterization, and application as doxorubicin carriers

A crosslinked amphiphilic copolymer [poly(ethylene glycol) (PEG)–poly(methyl methacrylate) (PMMA)–ethylene glycol dimethacrylate (EGDM)] composed of PMMA, PEG, and crosslinking units (EGDM) was synthesized by atom transfer radical polymerization to develop micelles as carriers for hydrophobic drugs. By adjusting the molar ratio of methyl methacrylate and EGDM, three block copolymer samples (P0, P1, and P2) were prepared. The measurement of gel permeation chromatography and ¹H‐NMR indicated the formation of crosslinked structures for P1 and P2. Fluorescence spectroscopy measurement indicated that PEG–PMMA–EGDM could self‐assemble to form micelles, and the critical micelle concentration values of the crosslinked polymer were lower than those of linear ones. The prepared PEG–PMMA–EGDM micelles were used to load doxorubicin (DOX). The drug‐loading efficiencies of P1 and P2 were higher than that of P0 because the crosslinking units enhanced the micelles' stability. With increasing drug‐loading contents, DOX release from the micelles in vitro was decreased, and in the crosslinked formulations, the release rate was also slower. An in vitro release study indicated that DOX release from the micelles for the linear samples was faster than that for crosslinked micelles. The drug feeding amount increased and resulted in an increase in the drug‐loading content, and the loading efficiency decreased. These PEG–PMMA–EGDM micelles did not show toxicity in vitro and could reduce the cytotoxicity of DOX in the micelles; this suggested that they are good candidates as stable drug carriers. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39623.     

聚乙二醇/聚己内酯三嵌段共聚物的合成与表征

以甲苯二异氰酸酯 (TDI)为偶联剂 ,合成了聚乙二醇 (PEG) /聚己内酯 (PCL)两亲性三嵌段共聚物 (PEG-b-PCL -b -PEG ,PECL) ,采用IR、1 H-NMR、DSC和WAXD分析和研究了PECL的结构与性能。实验结果表明 ,PECL的结构和组成与设计相一致 ,结晶度和熔点均低于均聚物 ,且随着PECL中PCL嵌段含量的增加 ,PCL嵌段熔点升高。透射电镜照片显示PECL纳米粒呈核 /壳结构的球形。     

Poly(butylene terephthalate)/poly(ethylene glycol) blends with compatibilizers

Polymer blend systems offer a versatile approach for tailoring the properties of polymer materials for specific applications. In this study, we investigated the compatibility of polybutylene terephthalate (PBT) and poly(ethylene glycol) (PEG) blends processed using a twin-screw extruder, with the aim of enhancing their compatibility. Phthalic anhydride (PAn) and phthalic acid (PAc) were used as potential compatibilizers at different concentrations to improve interfacial interactions between PBT and PEG. Blend morphologies were characterized using scanning electron microscopy, which revealed improved interfacial compatibility and reduced phase separation with the incorporation of small amounts of PAn and PAc. Differential scanning calorimetry analysis indicated changes in the melting temperature (T_m) and glass transition temperature (T_g) of the blends owing to the compatibilizing effects of PAn and PAc. Dynamic mechanical analysis further corroborated the influence of the compatibilizers on the T_g and viscoelastic behavior. Thermogravimetric analysis demonstrated enhanced thermal stability with the addition of either PAn or PAc. Rheological measurements indicated an increase in complex viscosity with increasing compatibilizer content, indicating improved compatibility. The degradation point (T_d) of PBT/PEG blend increased from 158 to 200 and 319°C with the incorporation of 5 phr PAn and 2 phr PAc, respectively. Mechanical properties, including tensile strength, Young's modulus, and Izod impact strength, were evaluated. For instance, the tensile strength of PBT/PEG blend was enhanced from 43.5 to 48.7 and 49.7 MPa by incorporating 5 phr PAn and 2 phr PAc, respectively. However, the impact strength of PBT/PEG blend increased from 3.0 to 4.3 and 4.2 kJ/m² with the addition of 1 phr PAn and 1 phr PAc, respectively. The findings demonstrated that adding 5 phr PAn or 2 phr PAc to the PBT/PEG blends was advantageous, achieving a harmony of performance benefits and compromises. Rheological observations contributed significantly to the mechanical and thermal properties. Overall, the study highlights the significance of utilizing PAn and PAc as effective compatibilizers for enhancing the properties of PBT/PEG blends, making them potential candidates for various applications.     

Preparation and characterization of poly(ethylene glycol)/organo-vermiculite nanocomposite polymer electrolytes

Vermiculite (VMT) was readily intercalated by hexadecyl trimethyl ammonium bromide to yield organo-vermiculite (OVMT), which was confirmed by X-ray diffraction measurement and Fourier transform infrared spectroscopy. Poly(ethylene glycol)/organo-vermiculite (PEG/OVMT) nanocomposites were prepared by using the direct melt intercalation method, and its intercalation state was confirmed by transmission electron microscope. Thereafter, a lithium salt was dissolved in the PEG/OVMT nanocomposites to prepare composite polymer electrolytes. The highest conductivity was 2.1 × 10⁻⁵ S cm⁻¹ at room temperature, which was obtained by AC impedance analysis when the amount of OVMT based on PEG was 1 wt%.     

Preparation and characterization of poly(lactic acid)/poly(ethylene oxide) blend film: effects of poly(ethylene oxide) and poly(ethylene glycol) on the properties

Poly(lactic acid) (PLA) film plasticized with poly(ethylene oxide) (PEO) at various weight percentages (1–5 wt%) was prepared to improve the elongation, thus overcoming the inherent brittleness of the material. After optimization of the amount of PEO (4 wt%) through mechanical analysis, poly(ethylene glycol) (PEG), a well‐established plasticizer of PLA, was added (0.5–1.5 wt%) without hampering the transparency and tensile strength much, and again its amount was optimized (1 wt%). Neat PLA and PLA with the other components were solvent‐cast in the form of films using chloroform as a solvent. Improvement in elongation at break and reduction in tensile strength suggested a plasticizing effect of both PEO and PEG on PLA. Thermal and infrared data revealed that the addition of PEO induced β crystals in PLA. Scanning electron micrographs indicated a porous surface morphology of the blends. PEO alone in PLA exhibited the best optical clarity with higher percentage crystallinity, while PEG incorporation in PLA/PEO resulted in superior barrier properties. Also, the stability of the blends under a wide range of pH means prospective implementation of the films in packaging of food and non‐food‐grade products. © 2018 Society of Chemical Industry     

Poly(ethylene oxide)/poly(propylene oxide)/poly(ethylene oxide) triblock copolymer as a sustained-release carrier for perfume compounds

The volatility behavior of perfume compounds in poly(ethylene oxide)/poly(propylene oxide)/poly(ethylene oxide) copolymer was investigated by means of dynamic and static headspace analyses. Suppression of the volatility of perfume compounds by EO₁₀₅PO₂₇EO₁₀₅ copolymer was markedly greater than by polyethyleneglycol. This suppressive effect may be due to micelle and gel formation of EO₁₀₅PO₂₇EO₁₀₅ copolymer. EO₁₀₅PO₂₇EO₁₀₅ copolymer is expected to be useful as a novel sustained-release carrier that maintains constant release rates for the volatility of perfume compounds over a wide temperature range.     

Aging of poly(lactide)/poly(ethylene glycol) blends. Part 2. Poly(lactide) with high stereoregularity

Blending poly(ethylene glycol) (PEG) with poly(lactide) (PLA) decreases the T_g and improves the mechanical properties. The blends have lower modulus and increased fracture strain compared to PLA. However, the blends become increasingly rigid over time at ambient conditions. Previously, it was demonstrated that a PLA of lower stereoregularity was miscible with up to 30 wt% PEG. Aging was due to slow crystallization of PEG from the homogeneous amorphous blend. Crystallization of PEG depleted the amorphous phase of PEG and gradually increased the T_g until aging essentially ceased when T_g of the amorphous phase reached the aging temperature. In the present study, this aging mechanism was tested with a crystallizable PLA of higher stereoregularity. Changes in thermal transitions, solid state structure, and mechanical properties were examined over time. Blends with up to 20 wt% PEG were miscible. Blends with 30 wt% PEG could be quenched from the melt to the homogenous amorphous glass. However, this composition phase separated at ambient temperature with little or no crystallization. Changes in mechanical properties during phase separation reflected increasing rigidity of the continuous PLA-rich phase as it became richer in PLA. Construction of a phase diagram for blends of higher stereoregular PLA with PEG was attempted.     

Aging of poly(lactide)/poly(ethylene glycol) blends. Part 1. Poly(lactide) with low stereoregularity

Poly(lactide) (PLA) is rapidly gaining interest as a biodegradable thermoplastic for general usage in degradable disposables. To improve mechanical properties, a PLA with low stereoregularity was blended with polyethylene glycol (PEG). Blends with up to 30 wt% PEG were miscible at ambient temperature. Blending with PEG significantly decreased the T_g, decreased the modulus and increased the fracture strain of PLA. However, the PLA/PEG 70/30 blend became increasingly rigid over time at ambient conditions. The mechanism of aging primarily under ambient conditions of temperature and humidity was studied. Changes in mechanical properties, thermal transitions and solid state morphology were examined over time. Aging was caused by slow crystallization of PEG. Crystallization of PEG depleted the amorphous phase of PEG and gradually increased the T_g. As T_g approached the aging temperature, reduced molecular diffusivity slowed the crystallization rate dramatically. Aging essentially ceased when T_g of the amorphous phase reached the aging temperature. The increase in matrix T_g and the reinforcing effect of the crystals produced a change in mechanical properties from elastomer-like to thermoplastic-like.     

Biodegradable polymer blends of poly(3-hydroxybutyrate) and poly(DL-lactide)-co-poly(ethylene glycol)

The melting and crystallization behavior and phase morphology of poly(3-hydroxybutyrate) (PHB) and poly(DL-lactide)-co-poly(ethylene glycol) (PELA) blends were studied by DSC, SEM, and polarizing optical microscopy. The melting temperatures of PHB in the blends showed a slight shift, and the melting enthalpy of the blends decreased linearly with the increase of PELA content. The glass transition temperatures of PHB/PELA (60/40), (40/60), and (20/80) blends were found at about 30°C, close to that of the pure PELA component, during DSC heating runs for the original samples and samples after cooling from the melt at a rate of 20°C/min. After a DSC cooling run at a rate of 100°C/min, the blends showed glass transitions in the range of 10–30°C. Uniform distribution of two phases in the blends was observed by SEM. The crystallization of PHB in the blends from both the melt and the glassy state was affected by the PELA component. When crystallized from the melt during the DSC nonisothermal crystallization run at a rate of 20°C/min, the temperatures of crystallization decreased with the increase of PELA content. Compared with pure PHB, the cold crystallization peaks of PHB in the blends shifted to higher temperatures. Well-defined spherulites of PHB were found in both pure PHB and the blends with PHB content of 80 or 60%. The growth of spherulites of PHB in the blends was affected significantly by 60% PELA content. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65: 1849–1856, 1997     

Preparation and characterization of poly(ethylene glycol) crosslinked chitosan films

Poly(ethylene glycol) (PEG) crosslinked chitosan films with various PEG to chitosan ratio and PEG molecular weight were successfully prepared via the epoxy‐amine reaction between chitosan and PEG‐epoxy. The thermal and mechanical properties and swelling behavior were studied for the PEG crosslinked chitosan films. The mechanical strength of chitosan films were greatly enforced by the introduction of PEG‐epoxy, achieving an elongation of about 80%. It was found that the crosslinked chitosan films form hydrogel in water, achieving a swelling ratio higher than 20 times of original weight. The swelling behavior of chitosan films relied greatly on the molecular weight of the crosslinker PEG‐epoxy and the weight percent of PEG‐epoxy. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Preparation and characterization of genistein containing poly(ethylene glycol) microparticles

The purpose of this study was to prepare, characterize, and evaluate genistein‐containing microparticles with enhanced dissolution profile using poly(ethylene glycol) (PEG) as polymer matrix. Genistein loaded microparticles were prepared by a solvent evaporation process and their surface, thermal, chemical, and dissolution properties were analyzed by microscopy, differential scanning calorimetry, ATR‐FTIR spectroscopy, and USP dissolution apparatus II, respectively. The wettability index was also determined. Genistein exhibited an elongated crystal habit. However, the drug containing PEG microparticles were discrete and quasispherical. The ATR‐FTIR studies performed on the formulation suggested hydrogen bonding between the drug and the polymer matrix. Thermal analysis indicated a conversion of the crystalline form of the drug to an amorphous form. Genistein, exhibiting low solubility and high permeability, is a Class II drug of the Biopharmaceutical Classification Scheme. However, there was a ～9‐fold increase in the rate of dissolution of genistein in the case of all formulations as compared to native genistein. This study showed that genistein could be effectively encapsulated into PEG microparticles using an emulsion‐solvent evaporation technique, therefore avoiding the potential disadvantages of other solid dispersion techniques. This approach provided a significant enhancement in the drug dissolution profile. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2070–2078, 2006     

Poly(ε-caprolactone)/poly(ethylene oxide) diblock copolymer. I. Isothermal crystallization and melting behavior

The isothermal crystallization and melting behavior of the poly(ε-caprolactone)(PCL)/poly(ethylene oxide)(PEO) diblock copolymer has been studied by WAXD, SAXS, and DSC methods. Only the PCL block is crystallizable; the PEO block of weight fraction 20% cannot crystallize, although its corresponding homopolymer has strong crystallizability. The long period, amorphous layer, and crystalline lamella of the PCL/PEO block copolymer all increase with the rise in the crystallization temperature, and the thickness of the amorphous layer is much larger than that of crystalline lamella due to the existence of the PEO block in the amorphous region. The isothermal crystallization of the PCL/PEO block copolymer is investigated by using the theory of Turnbull and Fischer. It is found that the amorphous PEO block has a great influence on the nucleation of PCL block crystallization, and the extent of this influence depends on crystallization conditions, especially temperature. The outstanding characteristics are the phenomenon of the double melting peaks in the melting process of the PCL/PEO block copolymer after isothermal crystallization at different temperatures and the transformation of melting peaks from double peaks to a single peak with variations in the crystallization condition. They are related mainly to the existence of the PEO block bonding chemically with the PCL block. In summing up results of investigations into the crystallization and melting behavior of the PCL/PEO block copolymer, it is interesting to notice that when the PCL/PEO block copolymer crystallizes at three different crystallization temperatures, i.e., below 0°C, between 0 and 35°C, and above 35°C, the variation of peak melting temperature is similar to that of overall crystallization rates in the process of isothermal crystallization. The results can be elucidated by the effect of the PEO block on the crystallization of the PCL block, especially its nucleation. © 1996 John Wiley & Sons, Inc.     

Preparation and characterization of poly(ethylene carbonate)/poly(lactic acid) blends

Poly(ethylene carbonate)/poly(lactic acid) blends were successfully prepared by means of a solution film-casting method, and their physicochemical properties were investigated. PEC/PLA blends exhibit partial miscibility and are characterized by the interaction of the ester and carbonic ester groups. One such interaction is between partial charges in –C–O– in –O–C=O of PLA and the carbonyl –C=O of PEC. Another is between –C–O– in –O–C=O of PLA and –C–O– in –CH₂–O– of PEC. The value of T_g varies by more than 10 °C across the blends. PEC does not significantly influence the melting temperature of neat PLA, but non-spherical spherulites are formed in PEC-rich blends, whereas the spherulites are spherical with an average size of 30 μm in PLA-rich blends. Crystallization of PLA is influenced by the addition of flexible PEC and by the proportion of PLA in the blends. Interestingly, addition of at least 10 wt% PLA increased T_g, with a crystallinity, X_c of 47% and better thermal degradation properties, with the temperature at 5 wt% weight loss (T_d5) more than 30 °C higher than for neat PEC.     

Properties of Poly(vinyl chloride)/poly(ethylene oxide)/polyaniline Conductive Films: The Effect of Poly(ethylene glycol) Diglycidyl Ether

The effect of polyaniline and poly(ethylene glycol) diglycidyl ether on tensile properties, morphology, thermal degradation, and electrical conductivity of poly(vinyl chloride)/poly(ethylene oxide)/polyaniline conductive films was studied. The poly(vinyl chloride)/poly(ethylene oxide)/polyaniline conductive films were prepared using a solution casting technique at room temperature until a homogeneous solution was produced. Poly(vinyl chloride)/poly(ethylene oxide)/polyaniline/poly(ethylene glycol) diglycidyl ether conductive films exhibit higher electrical properties, tensile strength, modulus of elasticity but lower final decomposition temperature than poly(vinyl chloride)/poly(ethylene oxide)/polyaniline conductive films. Scanning electron microscopy morphology showed that the polyaniline more widely dispersed in the poly(vinyl chloride)/poly(ethylene oxide) blends with the addition of poly(ethylene glycol) diglycidyl ether as surface modifier.     

Preparation of poly(lactic acid)/poly(ethylene glycol)/organoclay nanocomposites by melt compounding

Poly(lactic acid) (PLA)/organoclay nanocomposites were prepared by melt compounding in a co‐rotating twin screw extruder. Two types of commercialized organoclay (dimethyl benzyl stearyl ammonium ion and dimethyl distearyl ammonium ion intercalated between clay platelets named as Clay A and Clay B, respectively) and two grades of poly(ethylene glycol) (PEG) with different molecular weight (M_w = 2,000 and 300,000–500,000 named as PEG2k and PEG500k, respectively) were used in this study. The Young's modulus improved by the addition of organoclay to PLA matrix. The Young's modulus decreased with the addition of PEG to PLA/organoclay nanocomposites. The tensile strength and elongation of PLA/Clay B nanocomposites increased with the addition of PEG2k. The effect of the addition of PEG on d‐spacing of PLA/organoclay nanocomposites is dependent upon the kind of organoclay. The sizes of clay agglomerations in PLA/PEG/organoclay nanocomposites are larger than those of PLA/organoclay ones in the same organoclay. Addition of PEG to PLA/organoclay nanocomposites during melt compounding will not be useful for the preparation of PLA/organoclay having fully exfoliated clay platelets. The shear thinning properties of the nanocomposites are independent of the addition of PEG. On the whole, PEG2k is good plasticizer for PLA/organoclay nanocomposites. POLYM. COMPOS. 27:256–263, 2006. © 2006 Society of Plastics Engineers     

Preparation and characterization of poly(vinyl chloride)/polystyrene/poly(ethylene glycol) hollow‐fiber ultrafiltration membranes

Hollow‐fiber ultrafiltration (UF) membranes were prepared from blends of poly(vinyl chloride) (PVC) and polystyrene (PS) with a dry/wet phase inversion method. Poly(ethylene glycol) (PEG) and N,N‐dimethylacetamide were used as the additive and solvent, respectively. The effects of the PEG concentration in the dope solution as an additive on the cross sections and inner and outer surface morphologies, permeability, and separation performance of the hollow fibers were examined. The mean pore size, pore size distribution, and mean roughness of both the inner and outer surfaces of the produced hollow fibers were determined by atomic force microscopy. Also, the mechanical properties of the hollow‐fiber membranes were investigated. UF experiments were conducted with aqueous solutions of poly(vinyl pyrrolidone) (PVP; K‐90, M_w = 360 kDa). From the results, we found that the PVC/PS hollow‐fiber membranes had two layers with a fingerlike structure. These two layers were changed from a wide and long to a thin and short morphology with increasing PEG concentration. A novel and until now undescribed shape of the nodules in the outer surfaces, which was denoted as a sea‐waves shape, was observed. The outer and inner pore sizes both increased with increasing PEG concentration. The water permeation flux of the hollow fibers increased from 104 to 367 L m^?2 h^?1 bar^?1) at higher PEG concentrations. The PVP rejection reached the highest value at a PEG concentration of 4 wt %, whereas at higher values (from 4 to 9 wt %), the rejection decreased. The same trend was found also for the tensile stress at break, Young's modulus, and elongation at break of the hollow fibers. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 989‐1004, 2013     

Preparation and characterization of poly(butadiene-stat-styrene)/poly(styrene-stat-acrylonitrile) structured latex particles

In rubber toughening of thermoplastics, core/shell polymers have been used extensively. This work introduces the synthesis and characterization of polybutadiene based core/shell latex particles with controlled particle size and crosslinking density of the core. A lithium soap recipe was employed to prepare a series of poly(butadiene-stat-styrene) (90/10 by wt) core particles by conventional emulsion polymerization through a batch process. The shell polymer, poly(styrene-stat-acrylonitrile) (72/28 by wt), was polymerized by a semicontinuous process in the presence of the core particles to form a core/shell morphology. The effects of initiator concentration, monomer feeding rate, core/shell ratio, and gel-fraction of the core on the core/shell particle morphology were studied. The degree of grafting of the shell polymer on the core particles was determined as well. The morphology and glass transitions of these particles were characterized by transmission electron microscopy, differential scanning calorimetry, and dynamic mechanical spectroscopy. These latex particles can be used specifically in toughening polycarbonate. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 64: 1123–1134, 1997     

单甲氧基聚乙二醇氨基的制备

通过两步反应制备了相对分子质量(简称分子量)为5 000的单甲氧基聚乙二醇氨基(m PEG5k-EDA)。首先以单甲氧基聚乙二醇5 000(m PEG5k)和对甲苯磺酰氯(p-Ts Cl)为原料,反应得到活性中间体m PEG5k-OTs,然后通过与乙二胺的亲核取代反应获得目标产物,并通过正交实验确定了最佳反应条件:m PEG5k-OTs与乙二胺的摩尔比为1∶25、反应温度为80℃和反应时间为24 h。产物和中间体的结构通过IR和1HNMR进行表征,并通过SDS-PAGE碘染色法检测产物分子量的变化情况。结果表明,通过该方法能简便快捷地制备m PEG5k-EDA,在最优实验条件下,目标产物的总收率高达76.8%,且SDS-PAGE检测表明,产物纯度较高,不含交联副产物。     

Preparation and biodegradation of copolyesters based on poly(ethylene terephthalate) and poly(ethylene glycol)/oligo(lactic acid) by transesterification

The poly(ethylene terephthalate‐co‐ethyleneoxide‐co‐DL ‐lactide) copolymers were successfully prepared by the melt reaction between poly(ethylene terephthalate), poly(ethylene glycol), and DL ‐oligo(lactic acid) without any catalysts. The transesterification between ethylene terephthalate, ethyleneoxide, and lactide segments during the reaction was confirmed by the ¹H NMR analysis. The effect of reaction temperatures and the starting feed ratios on the molecular microstructures, molecular weights, solubility, thermal properties, and degradability of the copolyesters was extensively studied. The values of crystallization temperature, melting temperature, crystallization, and melting enthalpy of the copolyesters were found to be influenced by the reaction temperatures, starting feed ratios, etc. The copolyesters showed good tensile properties and were found to degrade in the soil burial experiments during the period of 3 months. The morphology of the copolyester films were also investigated by scanning electron microscopy during soil burial degradation. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

Preparation,characterization and degradation characteristics of polyanhydrides containing poly(ethylene glycol)

Poly(ethylene glycol) (PEG) segments were introduced into a polyanhydride main chain by copolymerization of terminal-carboxylated poly(ethylene glycol) with diacidic monomers (sebacic acid and trimellitylimidoglycine). IR and ¹H NMR spectroscopy confirmed the copolymer structures. DSC analysis showed that these polyanhydrides have low T_g and low crystallinity. In vitro degradation tests indicated that introducing PEG segments accelerated the degradation rate of these polymers and the degradation duration could be manipulated from 3 days to 3 weeks. The pH of the environment caused by the polymer degradation was lower than 5.0; therefore, the polyanhydrides could be used as components of a newly designed pulsed-release device for peptide and protein delivery. © 1999 Society of Chemical Industry