Poly(vinyl alcohol)/poly(vinyl pyrrolidone) interpenetrating polymer network: Synthesis and pervaporation properties

Novel interpenetrating polymer network membranes were made from poly(vinyl alcohol)/poly(vinyl pyrrolidone) blends of different compositions. The two polymer components were independently crosslinked chemically with glutaraldehyde and photochemically with 4,4′‐diazostilbene‐2,2′‐disulfonic acid disodium salt. The membrane performances were studied in pervaporation of tetrahydrofuran (THF)/water and THF/methanol mixtures. It was found that the membranes were excellent in THF dehydration, but much less efficient for the separation of THF/methanol mixtures. The pervaporation results were consistent with the membrane swelling data. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2808–2814, 2003     

Cellulose–poly(acrylamide or acrylic acid) interpenetrating polymer network membranes for the pervaporation of water–ethanol mixtures

A new type of interpenetrating polymer network (IPN) pervaporation membranes based on cellulose and synthetic polymers was developed. They were prepared by free-radical polymerization of acrylamide or acrylic acid in the presence (or absence) of the crosslinking agent (allyldextran or N,N′-methylenebisacrylamide) within cellophane films swollen in the reaction mixture. The swelling behavior of these membranes in water–ethanol solutions and their separation characteristics were investigated depending on the polyacrylamide (PAAm) or poly(acrylic acid) (PAA) content in the IPN (C_p) and for ionic cellulose–PAA membranes depending on the degree of neutralization of carboxylic groups and on the type of counterions. IPN membranes were selective over a wide range of ethanol concentration in the feed. The separation factor (α) and the permeation rate (P) significantly improved with increasing C_p in IPN membranes, especially for the cellulose–PAA(K⁺ form) membranes (for 86% EtOH feed at 50°C, and α and P values reached 1500 and 1.6 kg/m² h, respectively). The results for ionic and nonionic IPN membranes were compared. The separation characteristics of membranes were in good correlation with their swelling behavior. The α values of the membranes depended on the affinity of the IPN polymer chains functional groups for water. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 761–769, 1998     

Poly(acrylic acid)–poly(vinyl alcohol) copolymers with superabsorbent properties

Biodegradable polyacrylates were produced by a series of novel copolymerization and/or crosslinking techniques using poly(vinyl alcohol) (PVA) moieties modified by the incorporation of olefinic structures. PVA was modified by a tosylation and/or detosylation reaction. The functionalized PVA was copolymerized and/or crosslinked with acrylic acid or its partially neutralized form to give crosslinked polyacrylates that could swell in water. Their swelling behavior was determined under load. Degradation studies were performed in α-chymotrypsin, trypsin, and papain solutions. © 1998 John Wiley & Sons, Inc. J. Appl. Polym. Sci. 70: 817–829, 1998     

Natural rubber/poly(acrylic acid) semi‐interpenetrating polymer network membranes for the pervaporation of water–ethanol mixtures

Pervaporation membranes for the dehydration of water–ethanol mixtures were prepared from a semi‐interpenetrating polymer network (semi‐IPN) of natural rubber (NR) and crosslinked poly(acrylic acid) (PAA). The swelling studies revealed that hydrophilic PAA present in the semi‐IPN membranes caused the membranes to swell greatly in water. The swelling degree of the membranes in water was significantly affected by the amount ratio between the hydrophobic NR and the hydrophilic PAA. The sorption experiments of the NR/PAA membranes in various concentrations of water–ethanol mixtures suggested the preferential sorption to water. However, for the membrane with high PAA content, the water sorption selectivity decreased considerably at high water concentration of water–ethanol mixtures because the membrane was in the highly swollen state. Pervaporation separations of water–ethanol mixtures using NR/PAA membranes were performed and it was found that at low water concentrations of feed mixtures, increasing the PAA content of the membrane can enhance both water permeation flux and selectivity. Additionally, under low feed water concentration, increasing the feed temperature would increase the water flux with the decreasing of the ethanol flux. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Permeation of solutes through interpenetrating polymer network hydrogels composed of poly(vinyl alcohol) and poly(acrylic acid)

The swelling behaviors of poly(vinyl alcohol)–poly(acrylic acid) (PVA–PAAc) interpenetrating networks (IPN) hydrogels in the presence of electrolytes were studied. The ionized carboxylic group within IPN hydrogels at pH 7 strongly interacted with electrolytes in the medium and caused anomalous swelling pattern. The permeabilities of 5 representative solutes were regulated as a function of temperature, pH, ionic strength, solute size, and ionic properties of solutes. The permeation of nonionic solutes followed the swelling behaviors dependent on external stimuli, including the above factors. However, the ionic solutes showed different trends in their permeation through IPN hydrogels. © 1998 John Wiley & Sons, Inc. J Appl Polm Sci 69: 479–486, 1998     

Dehydration of light oil by pervaporation using poly(vinyl alcohol)–poly(acrylic acid‐co‐maleic acid) membranes

A new blended membrane was prepared and tested by pervaporation of light oil, a mixture of five alcohols plus water. The blended membrane was synthesized by blending poly(vinyl alcohol) and poly(acrylic acid‐co‐maleic acid) sodium salt in the presence of sulfuric acid to dope the reaction. We tested several membranes in order to choose the adequate composition to have the best permselectivity. The PVA(60)–PAA‐co‐maleic acid(40) membrane was selected as it was found to be highly selective. Sorption experiments were performed using binary and ternary water–alcohol solutions. The influence of temperature and feed composition on the selectivity and flux in pervaporation was investigated for two different binary mixtures (water/ethanol, water/isobutanol) and one ternary system (water/ethanol/isobutanol). This membrane presents good permselective properties, high water flux, and good selectivity and can even be used for high‐water activities The performances of this new membrane were compared to those obtained with the PVA(90)–PAA(10) membrane synthesized recently: The fluxes observed for the water–ethanol separation were of the same order of magnitude but the selectivity was found to be much higher. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1709–1716, 2002     

Swelling of thermosensitive interpenetrating polymer networks composed of poly(vinyl alcohol) and poly(acrylic acid)

The swelling behavior of interpenetrating polymer networks (IPNs) composed of poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAA) in water was studied. The PVA/PAA IPN gels were prepared by four synthetic methods. The swelling behaviors of these IPNs made by different methods were compared. The differences in swelling behaviors of samples are discussed on the basis of their structural and physical differences. © 1996 John Wiley & Sons, Inc.     

Electrical properties of sorbitol‐doped poly(vinyl alcohol)–poly(acrylamide‐co‐acrylic acid) polymer membranes

Solid polymer membranes from poly(vinyl alcohol) (PVA) and poly(acrylamide‐co‐acrylic acid) (PAA) with varying doping ratios of sorbitol were prepared using the solution casting method. The films were examined with Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, and AC impedance spectroscopy. The impedance measurements showed that the ionic conductivity of PVA–PAA polymer membrane can be controlled by controlled doping of sorbitol within the polymer blends. The PVA–PAA–sorbitol membranes were found to exhibit excellent thermal properties and were stable for a wide temperature range (398–563K), which creates a possibility of using them as suitable polymers for device applications. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Thermal behavior of poly(acrylic acid)–poly(vinyl pyrrolidone) and poly(acrylic acid)–metal–poly(vinyl pyrrolidone) complexes

Thermal analysis (TGA and DTA) of samples of PAA, PVP, PAA–PVP complexes, containing different weight fractions of PAA and ternary polymer–metal–polymer complexes, were studied. The activation energy parameters for the thermal degradation were also calculated. The study of the effect of FeCl₃, NiCl₂, and Ni(NO₃)₂ on the TGA and DTA curves of the complexes showed that the decompositions are dependent on the concentrations and the nature of the metal ions. The DTA traces of PAA–PVP complex containing FeCl₃, NiCl₂, and Ni(NO₃)₂ showed that the treatment of the complex with these metal ions causes considerable changes in the thermal decomposition of PAA–PVP complex. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4049–4057, 2006     

Comparison of the pervaporation separation of a water–acetonitrile mixture with zeolite‐filled sodium alginate and poly(vinyl alcohol)–polyaniline semi‐interpenetrating polymer network membranes

The pervaporation (PV) separation performance of ZSM‐5‐ and Na‐Y‐type zeolite‐filled sodium alginate (NaAlg) membranes were compared with those of pure NaAlg and semi‐interpenetrating polymer network (semi‐IPN) membranes of poly(vinyl alcohol) (PVA) with polyaniline (PANI) for the dehydration of acetonitrile. The PV separation characteristics of the zeolite‐filled membranes showed a dependence on the nature of the zeolites. The variation of the acidity function of the ZSM‐5 zeolite had an influence on the flux and selectivity of the membranes when compared to unfilled membranes. The crosslinked membranes were characterized by differential scanning calorimetry, X‐ray diffraction, scanning electron microscopy, and Fourier transform infrared spectroscopy. Increasing the PANI content of the semi‐IPN network increased the separation selectivity. Among the NaAlg membranes, the plain NaAlg membrane showed the highest selectivity of 414 at 30 mass % water in the feed mixture, whereas the Na‐Y‐ and ZSM‐5 (40)‐filled NaAlg membranes exhibited much lower values of selectivity, that is, 7.3 and 4.3, respectively for 30 mass % water in the feed. When the flux and selectivity data of ZSM‐5 (250)‐filled NaAlg membranes were compared with that of Na‐Y‐ or ZSM‐5 (40)‐filled NaAlg membranes, a noticeable increase in the selectivity for the ZSM‐5 (250)‐filled NaAlg membrane was observed, but a somewhat comparable flux was observed compared to the plain NaAlg membrane. For the first time, PANI was polymerized with PVA to yield a semi‐IPN. The total flux and water flux increased systematically, whereas the selectivity decreased greatly from 251.87 to 5.95 with increasing amounts of water in the feed. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1968–1978, 2005     

Synthesis and swelling characteristics of pH and thermoresponsive interpenetrating polymer network hydrogel composed of poly(vinyl alcohol) and poly(acrylic acid)

The swelling behavior of novel pH- and temperature-sensitive interpenetrating polymer networks (IPNs) composed of poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAAc) in water was investigated. The PVA/PAAc IPN hydrogels were synthesized by UV irradiation, followed by a repetitive freezing and thawing process by which PVA hydrogel networks were formed inside of cross-linked PAAc chains. The swelling behaviors of these IPNs were analyzed in buffer solution at various pH and temperature ranges. Swelling ratios of all IPNs were relatively high, and they showed reasonable sensitivity to both pH and temperature. Hydrogels showed both the positive and negative swelling behaviors depending on PAAc content. IPN46 showed the positive temperature-sensitive swelling behaviors and its stepwise changes in swelling ratio was about 1.8 and 2.0 obtained between 25 and 45°C at pH 7, and between pH 4 and 7 at 35°C, respectively. The positive temperature dependence is attributed to the formation and dissociation of hydrogen bonding complexes between PVA and PAAc. These IPNs are expected to show a pH- and temperature-sensitive drug release according to the stepwise behavior at this temperature region. © 1996 John Wiley & Sons, Inc.     

Microwave-induced shape-memory poly(vinyl alcohol)/poly(acrylic acid) interpenetrating polymer networks chemically linked to SiC nanoparticles

Microwave (MW)-induced shape-memory poly(vinyl alcohol)/poly(acrylic acid) (PVA/PAA) interpenetrating polymer networks (SMP-IPNs) were prepared through in situ polymerization. Silicon carbide (SiC) nanoparticles were modified by 3-(methacryloyloxy) propyltrimethoxysilane (KH570). 3-(Methacryloyloxy) propyltrimethoxysilane was covalently bonded on the surface of SiC through the reaction of silanol and the methoxy groups. The polymerization of acrylic acid (AA) using N,N′-methylenebis (2-propenamide) (MBA) as cross-linker in PVA solution was initiated through the double bonds of KH-570 grafted on SiC, leading to a PAA polymer network cross-linked with MBA. The PVA molecular chains run through the PAA cross-linking network and form an IPN structure. Therefore, SiC as a strong MW absorbing material could be chemically cross-linked into polymer matrix. The effect of composition on the properties of SMP-IPN was studied using dynamic mechanical analysis, dielectric properties and shape memory effect (SME) test. The results showed that the introduction of SiC in IPNs not only provided samples with excellent MW-induced shape memory effect (SME), but also caused a higher equilibrium temperature under MW irradiation. Moreover, both SiC content and applied MW power affected the shape recovery properties of PVA/PAA interpenetrating composites. MW-induced SMPs offered great advantages such as fast recovery, high recovery rate, and remote actuation. This study provides the potential applications of the fast and environmentally friendly SMPs used as MW-responsive sensors, implantable devices, etc.     

Synthesis and characterization of an interpenetrating polymer network composed of poly(methacrylic acid) and poly(vinyl alcohol)

Temperature and pH‐responsive interpenetrating polymer network (IPN) hydrogels, constructed with poly(methacrylic acid) (PMAA) and poly(vinyl alcohol) (PVA), by a sequential IPN method, were studied. The characterization of IPN hydrogels was investigated by Fourier‐transform infrared spectroscopy, differential scanning calorimetry (DSC) and swelling under various conditions. The IPN hydrogels exhibited relatively high swelling ratios, in the range 230–380 %, at 25 °C. The swelling ratios of the PMAA/PVA IPN hydrogels were pH and temperature dependent. DSC was used for the quantitative determination of the amounts of freezing and non‐freezing water. The amount of free water increased with increasing PMAA content in the IPN hydrogels. Copyright © 2004 Society of Chemical Industry     

Water behavior of poly(vinyl alcohol)/poly(vinylpyrrolidone) interpenetrating polymer network hydrogels

Interpenetrating polymer network (IPN) hydrogels based on poly(vinyl alcohol) and 1‐vinyl‐2‐pyrrolidone were prepared by radical polymerization with 2,2‐dimethoxy‐2‐phenylacetophenone as a photoinitiator and N,N′‐methylenebisacrylamide as a crosslinker. The IPN hydrogels were analyzed for the sorption behavior of water at 35°C and a relative humidity of 95% with a dynamic vapor sorption system, and water diffusion coefficients were calculated. Differential scanning calorimetry was used to quantitatively determine the amounts of freezing and nonfreezing water. The free‐water contents in the IPN hydrogel samples PV51, PV31, and PV11 were 74.40, 64.03, and 60.48% in pure water, respectively. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 24–27, 2003     

Cellulose–poly(acrylamide–acrylic acid) interpenetrating polymer network membranes for the pervaporation of water–ethanol mixtures. II. Effect of ionic group contents and cellulose matrix modification

The separation properties in the dehydration of a water–ethanol mixture and the swelling behavior of interpenetrating polymer network (IPN) pervaporation membranes based on a cellulose or cellulose–hydroxyethyl cellulose (HEC) matrix and poly(acrylamide and/or acrylic acid) were investigated depending on the ionic acrylate groups content (γ) in synthetic polymer chains (0–100 mol %), the HEC content in the matrix (0–50 wt %), and the temperature (25–60°C). The separation factor (α), permeation rate (P), and separation index (αP) significantly improved with increasing γ values only for the separation of concentrated ethanol solutions (～86 wt %). For more dilute solutions of ethanol (～46 wt %), the P and αP values also increased but no considerable increase in α was observed. All types of membranes based on the cellulose matrix were characterized by a drastic decrease in the values of P at [EtOH] ≥90 wt % and, as a result, a decrease in the separation index (kg m^?2 h^?1) from ～2000 (for 86 wt % EtOH, 50°C) to ～240 (for 95 wt % EtOH, 50°C), which correlates with a decrease in the degree of membrane swelling. The modification of the cellulose matrix by introducing HEC into it makes it possible to increase considerably the membrane swelling in concentrated EtOH solutions and, hence, the αP value to ～760 (95 wt % EtOH, 50°C). All types of IPN membranes exhibit a marked increase in both α and P when the temperature increases from 25 to 60°C. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1452–1460, 2001     

Poly(ether sulfone) supported hybrid poly(vinyl alcohol)–maleic acid–silicone dioxide membranes for the pervaporation separation of ethanol–water mixtures

Microporous poly(ether sulfone) (PES) supported hybrid polymer–inorganic membranes were prepared by the crosslinking of poly(vinyl alcohol) (PVA), maleic acid (MA), and SiO₂ via an aqueous sol–gel route and a solution‐casting method. The membrane performance was tested for the pervaporation separation of ethanol–water mixtures from 20 to 60 °C with a feed ethanol concentration of 96 wt %. The membrane characterization results reveal that different SiO₂ loadings affected the crystallinity and roughness of the membranes. The PVA–MA–SiO₂ membrane containing 10 wt % SiO₂ showed that SiO₂ nanoparticles were well dispersed within the polymer matrix; this resulted in significant enhancements in both the flux and selectivity. The membrane achieved a high water permeability of 1202 g·μm·m^?2 h^?1 kPa^?1 and a selectivity of 1027 for the separation of a 96 wt % ethanol‐containing aqueous solution. This enhanced membrane performance might have been due to the dense crosslinking membrane network, increased free volume, and uniform distribution of SiO₂ nanoparticles. Both the water and ethanol fluxes increased with the feed water concentration and temperature. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44839.     

Pervaporation of nonaqueous ethanol azeotropes through interpenetrating polymer network membranes prepared from poly(4-vinylpyridine) and poly(vinyl alcohol)

Highly hydrophilic interpenetrating polymer network (IPN) membranes were prepared from a mixture system of poly(4-vinylpyridine) (P4VP) and poly(vinyl alcohol) (PVA) by quaternizing crosslinking of P4VP with 1,4-dibromobutane (DBB) and simultaneous crosslinking of PVA with hexamethylene diisocyanate (HMDI). The membrane performance in pervaporation (PV) for the azeotropic mixture of ethanol with a less polar organic liquid (chloroform, benzene, carbon tetrachloride, and cyclohexane) was investigated. The strength of these IPN membranes was higher than that of the cellulose acetate membrane and depended on the membrane composition. All the membranes were ethanol permselective for the azeotropic feeds and equimolar mixture feeds as well. Only the swelling degree Q of the membrane, among several physicochemical factors, showed a relationship with the separation performance for the four feeds; a lower value of Q generally corresponded to a higher separation factor and smaller permeability. The membrane composition, which exhibited an optimum membrane performance, was examined in detail for some membranes. Both the separation factor for sorption and that for diffusion far exceeded unity, but the latter was greater in most cases than was the former and dominated the overall separation. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2729–2738, 2001     

Transient currents in poly(vinyl alcohol)–poly(vinyl pyrrolidone) polymer blend films

Transient currents (charging and discharging currents) in poly(vinyl alcohol) (PVA)–poly(vinyl pyrrolidone) (PVP) polymer blend films were measured over the temperature range 30–150°C at field strengths of 2.32–23.2 × 10⁶ Vm^?1. Polymer films were prepared by the isothermal immersion technique. Activation energies were evaluated from quasi-steady-state currents. A single relaxation peak was observed both from isochronal currents and low frequency dielectric relaxation. Activation energies evaluated from these two methods are found to be in fairly good agreement. The polarization is considered to be due to space charge origin along with some contribution from dipolar groups. The maximum loss was observed in Sample I (PVA: PVP = 25:75), suggesting maximum heterogeneity in this blend ratio.