Grafting of acrylic monomers onto cotton fabric using an activated cellulose thiocarbonate–azobisisobutyronitrile redox system

The feasibility of a cellulose thiocarbonate–azobisisobutyronitrile (AIBN) initiation system to induce graft copolymerization of methyl methacrylate (MMA) and other acrylic monomers onto cotton fabric was investigated. Other acrylic monomers were acrylic acid, acrylonitrile, and methyl acrylate. The initiation system under investigation was highly activated in the presence of a metal‐ion reductant or a metal‐ion oxidant in the polymerization medium. A number of variables in the grafting reaction were studied, including AIBN concentration, pH of the polymerization medium, nature of substrate, monomer concentration, duration and temperature of polymerization, and composition of the solvent/water polymerization medium. The solvents used were methanol, isopropanol, 1,4‐dioxane, cyclohexane, benzene, dimethyl formamide, and dimethyl sulfoxide. There were optimal concentrations of AIBN (5 mmol/L), MMA (8%), Fe²⁺ (0.1 mmol/L), Mn²⁺ (8 mmol/L), and Fe³⁺ (2 mmol/L). A polymerization medium of pH 2 and temperature of 70°C constituted the optimal conditions for grafting. The methanol/water mixture constituted the most favorable reaction medium for grafting MMA onto cotton fabric by using the Fe²⁺–cellulose thiocarbonate–AIBN redox system. MMA was superior to other monomers for grafting. The unmodified cotton cellulose showed very little tendency to be grafted with MMA compared with the chemically modified cellulosic substrate. A tentative mechanism for the grafting reaction was proposed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1261–1274, 2004     

Peroxydiphosphate–metal ion–cellulose thiocarbonate redox system‐induced graft copolymerization of vinyl monomers onto cotton fabric

The grafting of methacrylic acid (MAA) and other vinyl monomers onto cotton cellulose in fabric form was investigated in an aqueous medium with a potassium peroxydiphosphate–metal ion–cellulose thiocarbonate redox initiation system. The graft copolymerization reaction was influenced by peroxydiphosphate (PP) concentration, the pH of the reaction medium, monomer concentration, the duration and temperature of polymerization, the nature of vinyl monomers, and the nature and concentration of metallic ions (activators). On the basis of a detailed investigation of these factors, the optimal conditions for the grafting of MAA onto cotton fabric with the said redox system were as follows: [Fe²⁺] = 0.1 mmol/L, [PP] = 2 mmol/L, [MAA] = 4%, pH‐2, grafting time = 2 h, grafting temperature = 70°C, and material/liquor ratio = 1 : 50. Under these optimal conditions, the graft yields of different monomers were in the following sequence: MAA ? acrylonitrile > acrylic acid > methyl acrylate > methyl methacrylate. The unmodified cellulosic fabric (the control) had no ability to be grafted with MAA with the PP–Fe²⁺ redox system. The percentage of grafting onto the thiocarbonated cellulosic fabric was more greatly enhanced in the presence of iron salts than in their absence. This held true when the lowest concentrations of these salts were used separately. A suitable mechanism for the grafting processes is suggested, in accordance with the experimental results. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1879–1889, 2003     

Graft polymerization of some vinyl monomers onto acrylic rubber. I. Chain transfer and grafting reaction

The grafting reactions of styrene (St), methyl methacrylate (MMA), and vinyl acetate (VAc) were investigated in the presence of n-butyl acrylate–acrylonitrile copolymer. Results showed that the nature of monomer and initiator were the major factors influencing the grafting activity. The grafting efficiency was 0.87 for St, 0.26 for MMA, and 0.18 for VAc under the most favorable conditions. Acrylic rubber reduced the rate of polymerization, and the retarding effect increased in the order St, MMA, VAc. The chain transfer constants for acrylic rubber were evaluated to be 4.8 × 10^?4 for St, 1.27 × 10^?3 for MMA, and 1.45 × 10^?3 for VAc. The rate of polymerization and the grafting efficiency decreased with increasing acrylonitrile content in acrylic rubber, while the chain transfer constant of St for acrylic rubber remained practically unchanged.     

Pentavalent vanadium ion–cellulose thiocarbonate redox-system induced grafting of methyl methacrylate and other vinyl monomers onto cotton fabric

Cellulose thiocarbonate was prepared by reacting cotton cellulose fabric with carbon disulphide in the presence of sodium hydroxide. The treated fabric formed, with pentavalent vanadium ion, an effective redox system capable of initiating grafting of methyl methacrylate (MMA) and other monomers no+o the cotton fabric. The dependence of grafting on vanadium concentration, pH of the polymerization medium, temperature and duration of grafting, nature and concentration of monomer, and solvent/water ratio was studied. The results indicated that increasing the pentavalent vanadium (V^v) concentration up to 60 mmol/L was accompanied by enhancement in the rate of grafting; the latter was not affected by further increase in V^v concentration. Maximum grafting yield was achieved at pH 2; grafting fell greatly at higher pH. The rate of grafting followed the order: 70° > 60° > 50°C. The graft yield increased significantly by increasing the MMA concentration from 0.5 to 5%. Of the solvents studied, n-propanol and isopropanol enhanced the grafting rate provided that a solvent/water ratio of 5 : 95 was used; a higher solvent ratio decreased the magnitude of grafting. Other solvents, namely, methanol, ethanol, n-butanol, and acetone, in any proportion, decreased the rate of grafting. With the monomer used, the graft yield followed the order: methyl methacrylate > methyl acrylate > methacrylic acid > ethyl methacrylate > acrylic acid. Also reported was a tentative mechanism for vinyl-graft copolymerization onto cotton fabric using cellulose thiocarbonate-V^v. © 1993 John Wiley & Sons, Inc.     

Photografting of PVC containing N,N‐diethyldithiocarbamate groups with vinyl monomers

Poly(vinyl chloride) (PVC) with pendent N,N‐diethyldithiocarbamate groups (PVC–SR) was prepared through the reaction of PVC with sodium N,N‐diethyldithiocarbamate (NaSR) in butanone and used as a photoinitiator for the grafting polymerization of three vinyl monomers [styrene (St), methyl methacrylate (MMA), and acrylamide (Am)]. The effects of ultraviolet (UV) irradiation time, PVC–SR amount, and the monomer amount on grafting and grafting efficiency were investigated. The results showed that PVC–SR could initiate the polymerization of three vinyl monomers effectively and obtained crosslinked copolymers. The grafting and grafting efficiency of styrene and methyl methacrylate were higher than those of acrylamide. The polymerization activity of three monomers was acrylamide > methyl methacrylate > styrene. By analyzing the UV spectrum of PVC–SR with a different irradiation time, it was confirmed that PVC–SR was dissociated mainly into macromolecular the sulfur radical PVC–S · and the small molecular carbon radical · C(S)N(C₂H₅)₂; the grafting polymerization mechanism was discussed. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2569–2574, 2000     

Grafting vinyl monomers onto silk fibers: Graft copolymerization of methyl methacrylate onto silk using acetylacetonate Mn(III) complex

The graft copolymerization of methyl methacrylate onto Mulberry silk fibers was studied in aqueous solution using Mn(acac)₃ as initiator. Perchloric acid was found to catalyze the reaction. The rate of grafting was investigated by varying the concentration of the monomer and the complex, acidity of the medium, the solvent composition of the reaction medium, the surfactants, and the inhibitors. The graft yield increases with increasing concentration of Mn(acac)₃ up to 0.01 mol/L, decreasing thereafter. Increase of MMA concentration up to 0.56 mol/L increases graft yield, and thereafter it decreases. Among the various vinyl monomers studied, MMA was found to be most suitable for grafting. Grafting increases up to 7.5 × 10^?3 mol/L of HClO₄ concentration, and thereafter it decreases. A suitable reaction scheme has been proposed and a rate equation has been derived. The energy of activation has been calculated from the Arrhenius plot. The chain transfer constants for various chain transfer solvents have been evaluated from the average molecular weight (M?) of grafted poly(methyl methacrylate).     

Graft polymerization of methyl methacrylate onto guar gum with ceric ammonium sulfate/dextrose redox pair

The effect of different reaction conditions on the grafting of methyl methacrylate (MMA) onto guar gum (GG) has been studied in detail. The grafting efficiency was optimal under the following conditions: MMA at 1.13 mol/L; ceric ammonium sulfate at 6.32 × 10^?3 mol/L; dextrose monohydrate at 2.428 × 10^?3 mol/L; GG at 4 g/L; temperature at 50°C; and time at 210 min. Fourier transform infrared spectroscopy was used for the confirmation of copolymer formation. Thermogravimetric analysis of GG and a representative graft copolymer were studied. A probable mechanism of grafting has been suggested. The biodegradability of the resulted copolymer was evaluated. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 3520–3525, 2001     

Grafting of Methacrylic Acid and Other Vinyl Monomers Onto Cotton Fabric Using Ce (IV) Ion–Cellulose Thiocarbonate Redox System

Graft copolymerization of methacrylic acid (MAA) onto cotton fabric using tetravalent ceric ion (Ce^IV)–cellulose thiocarbonate redox system was investigated under different conditions including pH of the polymerization medium (1–4), ceric sulphate (CS) concentration (4–20 m mole/l), MAA concentration (1%–6%), polymerization time (1/4–2 h) and polymerization temperature (0–70°C). Results obtained indicated that the optimal conditions for MAA grafting onto cotton fabric using the said redox system consisted of: [CS], 20 m mole/l; [MAA], 4%; pH of the medium, 2; time, 2 h; temperature, 60 °C keeping a material-to-liquor ratio at 1:0. Applying optimized conditions to different monomers, namely, acrylic acid (AA), methacrylic acid (MAA), acrylamide (Aam), acrylonitrile (AN), butyl acrylate (BuA), methyl methacrylate (MMA), ethyl methacrylate (EMA) and glycidyl methacrylate (GMA) onto the same substrate, the rates of grafting followed the order:

Graft copolymerization of methyl methacrylate onto rubber‐wood fiber using H2O2 and Fe2+ as an initiator system

Methyl methacrylate (MMA) was successfully grafted onto rubber‐wood fiber in a free‐radical solution polymerization initiated by ferrous ion and hydrogen peroxide. The effects of the reaction parameters (reaction temperature, reaction period, influence of hydrogen peroxide, ferrous ammonium sulfate, and monomer concentrations) were investigated. The grafting percentage showed dependency on H₂O₂, Fe²⁺, and monomer concentrations, as well as reaction temperature and reaction period. The optimum reaction temperature was determined to be about 60°C and the reaction period was 60 min. The optimum concentration of H₂O₂ was 0.03M and optimum amounts of Fe²⁺ and MMA were 0.26 mmol and 2.36 × 10^?2 mol, respectively. Poly(methyl methacrylate) (PMMA) homopolymer was removed from the graft copolymer by Soxhlet extractor using acetone. The presence of PMMA on the fiber was shown by FT‐IR spectroscopy and gravimetric analysis. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2499–2503, 2003     

Graft copolymerization of methyl methacrylate onto oil palm empty fruit bunch fiber using H2O2/Fe2+ as an initiator

Graft copolymerization of methyl methacrylate (MMA) onto oil palm empty fruit bunch fiber (OPEFB) was successfully carried out in aqueous medium using hydrogen peroxide as an initiator. Results from the investigation of the optimum conditions for grafting are presented. Maximum percentage of grafting was achieved when the amount of initiator, cocatalyst, and nitric acid were 5.877 × 10^?3 mol, 2.63 × 10^?4 mol, and 3.24 × 10^?3 mol, respectively. The optimum reaction temperature was 50°C and the reaction period was 120 min. The highest percentage of grafting and grafting efficiency were 220 and 47%, respectively, under optimum conditions. The grafted copolymer was characterized by FTIR spectroscopy and scanning electron microscopy. The presence of a band at 1730 cm^?1 provides strong evidence of grafting. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2233–2238, 2003     

Graft polymerization of methyl methacrylate onto polyvinyl alcohol using Ce4+ initiator

Methyl methacrylate (MMA) was graft polymerized onto polyvinyl alcohol (PVA) using ceric ammonium sulfate as an initiator in aqueous medium. The grafting efficiency of MMA was studied as a function of monomer and initiator concentration, time, pH, and temperature. Grafting efficiency was found to be optimum at a particular level of ceric ammonium sulfate (3.16 × 10⁻³ mol L⁻¹), PVA (1.0 g L⁻¹), MMA (0.469 mol L⁻¹), H₂SO₄ (0.188 mol L⁻¹), temperature (45°C), and time (4 h). The probable reasons for the influence of reaction variable on the observed trend of MMA towards grafting have been discussed. Acid hydrolysis and infrared spectroscopy were used for the confirmation of graft copolymer formation. Thermogravimetric analysis of PVA and a representative graft copolymer were studied. The solubility/swellability and the gelatinization characteristics are also reported. © 1998 John Wiley & Sons, Inc. J. Appl. Polym. Sci. 70: 523–527, 1998     

Grafting vinyl monomers onto wool fibers: Graft copolymerization of methyl methacrylate onto wool fibers using vanadyl acetyl acetonate complex

The graft copolymerization of methyl methacrylate (MMA) onto native and reduced Indian Chokla wool fibers was studied in aqueous solution using the acetylacetonate oxovanadium (IV) complex. The rate of grafting was investigated by varying the concentration of the monomer and the complex, acidity of the medium, and the solvent composition of the reaction medium. The graft yield increases with increasing concentration of the initiator up to 8.75 × 10^?5 mol/L, of the monomer up to 0.5634 mol/L, and thereafter it decreases. MMA was found to be the most active monomer when compared to other vinyl monomers. Grafting increases with increasing concentration of HClO₄ and with increasing temperature. Reduced and oxidized wools were found to be better substrates than untreated, esterified, crosslinked, and trinitrophenylated wools. The extent of grafting was mostly dependent upon the concentration of ? SH groups in case of reduced wool. A suitable reaction scheme has been proposed and the activation energy was calculated from Arrhenius plot.     

Grafting onto wool. VII. Ceric ion-initiated graft copolymerization of vinyl monomers. Comparison of monomer reactivities

In an attempt to compare relative reactivities of vinyl monomers toward grafting, methyl methacrylate (MMA) and acrylic acid (AAc) were grafted separately to Himachali wool in aqueous medium by using ceric ammonium nitrate (CAN) as redox initiator. Nitric acid was found to catalyze the reaction. Percent grafting was determined as a function of concentration of nitric acid, concentration of CAN, concentration of monomer, time, and temperature. Optimum conditions for maximum grafting were evaluated for each monomer and were found to depend upon the nature of the monomer. Reactivities of MMA and AAc toward grafting were compared with those of methyl acrylate (MA), ethyl acrylate (EA), and vinyl acetate (VAc) reported earlier from this laboratory and were found to follow the order MA > EA > MMA > VAc > AAc. An explanation for the observed order of reactivity of different vinyl monomers is presented.     

Polymerization of methyl methacrylate with Ni(acac)2–methylaluminoxane catalyst

Polymerization of methyl methacrylate (MMA) with nickel(II) acetylacetonate [Ni(acac)₂] in combination with methylaluminoxane (MAO) was investigated. Ni(acac)₂ was found to be an effective catalyst for the polymerization of MMA. From a kinetic study of the polymerization of MMA with the Ni(acac)₂–MAO catalyst, the overall activation energy was estimated to be 15 kJmol⁻¹. The polymerization rate (R_p) was expressed as follows: R_p = k [MMA]^1.0[Ni(acac)₂–MAO]^0.6 (the MAO/Ni mole ratio was kept constant). The mechanism for the polymerization of vinyl monomers with the Ni(acac)₂–MAO catalyst is discussed. © 2000 Society of Chemical Industry     

Synthesis of polymer‐grafted natural rubbers by radical photopolymerization of vinyl monomers initiated from the rubber chains

The synthesis of polymer‐grafted natural rubbers (NRs) was considered through photopolymerization of vinyl monomers initiated from N,N‐diethyldithiocarbamate groups previously introduced onto cis 1,4‐polyisoprene units of NR chains. The development of the procedure was made with methyl methacrylate (MMA) as monomer. First, initiation of MMA photopolymerization was tested using a model molecule of the N,N‐diethyldithiocarbamate‐functionalized 1,4‐polyisoprene unit to verify the feasibility of the procedure considered. Then, MMA polymerization was successfully initiated from N,N‐diethyldithiocarbamate‐functionalized NR backbone used as macroinitiator, and the conditions of grafting were optimized. It was shown that MMA grafting could occur either in monomer medium, in solution in toluene, and in latex medium, and that the quantities of homopolymer formed were still low. Thereafter, grafting studies were performed with other vinyl monomers (styrene, methacrylonitrile, acrylamide, acrylic acid) showing that grafting efficiency depends essentially on the nature of the monomer. The method developed here was shown particularly well adapted for the synthesis of polymer‐grafted NR with monomers of low polarity. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Self‐driven graft polymerization of vinyl monomers on poultry chicken feathers in the absence of initiator/catalyst

An efficient and simple method for graft copolymerization of powdered chicken feather (CF) with vinyl monomers without any free radical initiator is reported. Various vinyl monomers such as glycidyl methacrylate (GMA), styrene (S), and methyl methacrylate (MMA); (20–60 wt % with respect to CF) were successfully grafted to chicken feather (CF) by using sodium dodecyl sulfate (SDS, 0.086–0.5 mmol) in the absence of any catalyst or initiator. Most likely, the hydrophilicity, hydrophobicity, and complex forming properties of chicken feather keratin with surfactant molecules were responsible for efficient grafting of polymers on CF surface. The effect of polymerization conditions, such as monomer concentration, temperature, and time of reaction, on the grafting parameters such as monomer conversion, grafting efficiency, and molar grafting ratio were studied. The described method showed a good potential of using low cost, easily accessible poultry chicken feathers as grafting material and self catalyzing agent for graft copolymerization with vinyl monomers to produce low cost commodity plastic for various end uses. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44645.     

Studies of graft copolymerization of acrylamide onto guar gum using peroxydiphosphate–metabisulphite redox pair

The effect of reaction conditions on the grafting parameter during grafting of acrylamide onto guar gum has been studied using peroxydiphosphate–metabisulphite redox pair at 35 °C. Grafting ratio, efficiency and add‐on all increase as the concentrations of peroxydiphosphate and acrylamide increase up to 40.0 × 10⁻³ mol dm⁻³ and 40.0 × 10⁻² mol dm⁻³, respectively. It has been observed that the optimum concentrations of metabisulphite and guar gum for obtaining high grafting ratio, efficiency, add‐on and conversion are 6.0 × 10⁻³mol dm⁻³ and 91.7 × 10⁻² g dm⁻³, respectively. © 2000 Society of Chemical Industry     

Graft polymerization of methyl methacrylate on poly(ethylene terephthalate) fibers using H2O2 as initiator

The presence of poly(ethylene terephthalate) (PET) fibers during polymerization of methyl methacrylate (MMA) using H₂O₂ as initiator resulted in a substantial, constant increase in the weight of the fibers after repeated extraction with acetone. Fractional precipitation curves of the extracted PET—MMA polymerization product and a physical mixture of PET and PMMA were different, indicating that the interaction of MMA with PET involved grafting. The magnitude of the latter enhanced considerably by increasing H₂O₂ concentration up to 30 mequiv/L, then decreased by further increasing H₂O₂ concentration. There was also an optimal temperature (80°C) for grafting; below or above this temperature, lower grafting was obtained. Similarly, carrying out the polymerization reaction at different pH values revealed that pH7 constituted the optimal. On the other hand, grafting increased upon increase of the methyl methacrylate concentration within the range studied (8–20%). Incorporation of Cu²⁺ or Fe³⁺ ions in the polymerization medium caused a decrement in grafting, irrespective of the metallic ion concentrations. Using methylene chloride as a swelling agent for the fibers failed to enhance the susceptibility of the latter toward grafting. On the contrary, tetrachloroethane was quite promising in this regard. The homopolymer formed during grafting was also reported.     

Radiation‐induced graft copolymerization of 2‐vinylpyridine and styrene onto isotactic polypropylene fiber

Isotactic polypropylene fiber (IPP) was graft‐copolymerized using 2‐vinyl pyridine (2‐VP) and styrene (sty) as the monomers by the mutual irradiation method in air. The percentage of grafting was determined as a function of various reaction parameters and it was found that the maximum grafting of 2‐VP (114%) and sty (76%) was obtained at an optimum dose of 1.08 × 10⁴ and 0.64 × 10⁴ Gy using 1.8 × 10⁻² mol of 2‐VP and 4.3 × 10⁻² mol of sty, respectively. The graft copolymers were characterized by differential scanning calorimetric analysis and isolation of the grafted chains from the grafted iPP samples. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 2959–2969, 1999     

Polymerization of methyl methacrylate by imidazole–carbon tetrachloride charge-transfer system

The kinetics of charge-transfer (CT) polymerization of methyl methacrylate (MMA) in the presence of imidazole (Imy) and CCl₄ was studied in dimethyl sulfoxide (DMSO) at 60°C. The rate of polymerization (R_p) is sensitive to the [CCl₄] up to a concentration of 0.60 mol L⁻¹, but at a higher concentration, it is practically independent of the [CCl₄]. When [CCl₄] > [Imy], R_p is proportional, to [MMA]^1.45±0.15 and [Imy]^0.53±0.04 and the average rate constant for the polymerization of MMA is 3.25±0.41 × 10⁻⁶ L mol⁻¹ s⁻¹. This article also reports the polymerization of MMA initiated by Imy and CCl₄ and accelerated by hexakis (dimethyl sulfoxide) iron (III) perchlorate, [Fe(DMSO)₆] (CIO₄)₃ (A), at 60°C. The presence of Fe(Imy)³⁺₃ in the polymerization system produced well-defined induction periods. The rate constant at 60°C for the interaction of the poly(MMA) radical toward Fe(Imy)³⁺₃ is 7.19 × 10⁴ L mol⁻¹ s⁻¹. A probable reaction mechanism for the polymerization system has been postulated to explain the observed results. © 1996 John Wiley & Sons, Inc.