首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 812 毫秒
1.
The poly(urea‐imide) copolymers with inherent viscosity of 0.81–1.08 dL/g were synthesized by reacting aryl ether diamine or its polyurea prepolymer with various diisocyanate‐terminated polyimide prepolymers. The aryl ether diamine was obtained by first nucleophilic substitution of phenolphthalein with p‐chloronitrobenzene in the presence of anhydrous potassium carbonate to form a dinitro aryl ether, and then further hydrogenated to diamine. The polyimide prepolymers were prepared by using 4,4′‐diphenylmethane diisocyanate to react with pyromellitic dianhydride, 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride, or 3,3′,4,4′‐sulfonyldiphthalic anhydride by using the direct one‐pot method to improve their solubility, but without sacrificing thermal property. These copolymers are amorphous and readily soluble in a wide range of organic solvents such as N‐methyl‐2‐pyrrolidone, dimethylimidazole, N,N‐dimethylacetamide, dimethyl sulfoxide, N,N‐dimethylformamide, m‐cresol, and sulfolane. All the poly(urea‐imides) have glass transition temperatures in the range of 205–240°C and show a 10 wt % loss at 326–352°C in nitrogen and 324–350°C in air. The tensile strength, elongation at break, and initial modulus of these copolymer films range from 42 to 79 MPa, 5 to 16%, and 1.23 to 2.02 GPa, respectively. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1719–1730, 1999  相似文献   

2.
Thermostable Nomex copoly(amide–imide)s with inherent viscosity of 0.72–1.31 dL/g were synthesized by reacting diacid-terminated Nomex prepolymer with various diisocyanate-terminated polyimide prepolymers. The polyimide prepolymer was prepared by using 4,4′-diphenylmethane diisocyanate to react with 3,3′,4,4′-benzophenonetetracarboxylic dianhydride, pyromellitic dianhydride, or 3,3′,4,4′-sulfonyl diphthalic anhydride using a direct one pot method in order to improve their solubility. The copolymers, except B-1, P-1, P-2, D-1, and D-2, could be dissolved in N, N-dimethylacetamide +5% lithium chloride at room temperature or dimethyl sulfoxide at high temperature but were not soluble in N,N-dimethylformamide or pyridine. The solubility is considered to be related to their crystallinity. Those copolymers with crystalline structure displayed poor solubility. All the Nomex copoly(amide–imide)s had glass transition temperatures in the range of 223–352°C and showed a 10% weight loss temperature of 438–574°C in air and 441–585°C in nitrogen atmosphere. The tensile strength, elongation at break, and initial modulus of polymer films ranged 63–118 MPa, 4–9% and 1.67–2.53 GPa, respectively. From the X-ray diffraction studies, copolymers of B-1, P-1, P-2, D-1, and D-2 with high content of PmIA showed a crystalline structure, but the others only displayed an amorphous morphology. © 1996 John Wiley amp; Sons, Inc.  相似文献   

3.
A new indane containing unsymmetrical diamine monomer ( 3 ) was synthesized. This diamine monomer leads to a number of novel semifluorinated poly (ether imide)s when reacted with different commercially available dianhydrides like benzene‐1,2,4,5‐tetracarboxylic dianhydride (PMDA), benzophenone‐3,3′, 4,4′‐tetracarboxylic dianhydride (BTDA), 4,4′‐(hexafluoro‐isopropylidene)diphthalic anhydride (6FDA), 4,4′‐oxydiphthalic anhydride (ODPA), and 4,4′‐(4,4′‐Isopropylidenediphenoxy)bis(phthalic anhydride) (BPADA) by thermal imidization route. All the poly(ether imide)s showed excellent solubility in several organic solvents such as N‐methylpyrrolidone (NMP), N,N‐dimethylformamide (DMF), N,N‐dimethylacetamide (DMAc), tetrahydrofuran (THF), chloroform (CHCl3) and dichloromethane (DCM) at room temperature. These light yellow poly (ether imide)s showed very low water absorption (0.19–0.30%) and very good optical transparency. Wide angle X‐ray diffraction measurements revealed that these polymers were amorphous in nature. The polymers exhibited high thermal stability up to 526°C in nitrogen with 5% weight loss, and high glass transition temperature up to 265°C. The polymers exhibited high tensile strength up to 85 MPa, modulus up to 2.5 GPa and elongation at break up to 38%, depending on the exact polymer structure. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009  相似文献   

4.
3,3′‐Dinitrobenzidine was first reacted with excess m‐chlorophenyl acid to form a monomer with dicarboxylic acid end groups. Two types of aromatic dianhydrides (Pyromellitic diconhydride (PMDA) and 3,3′,4,4′‐sulfonyl diphthalic anhydride) were also reacted with excess 4,4′‐diphenylmethane diisocyanate to form polyimide prepolymers terminated with isocyanate groups. The prepolymers were further extended with the diacid monomer to form nitro groups containing aromatic poly(imide amide). The nitro groups in these copolymers were hydrogenated to form amine groups and then were cyclized at 180°C to form poly(imide amide benzimidazole) in poly(phosphoric acid), which acted as a cyclization agent. The resultant copolymers were soluble in sulfuric acid and poly(phosphoric acid), in sulfolane under heating to 100°C, and in the polar solvent N‐methyl‐2‐pyrrolidone under heating to 100°C with 5% lithium chloride. According to wide‐angle X‐ray diffraction, all the copolymers were amorphous. According to thermal analysis, the glass‐transition temperatures of the copolymers were 270–322°C. The 10% weight‐loss temperatures were 460–541°C in nitrogen and 441–529°C in air. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1435–1444, 2003  相似文献   

5.
Poly(amide imide) copolymers were synthesized with different molar ratios of 4,4‐diphenylmethane diisocyanate, two types of aromatic dianhydrides (pyromellitic dianhydride (PMDA) and 3,3′,4,4′‐sulfonyl diphthalic anhydride (DSDA)), and a diacid, which was derived from 3,3′‐dinitrobenzidine and isophthaloyl chloride in a previous work. In this study, the copolymers were further reacted with a reducing agent, and the nitro groups in the copolymers were hydrogenated into amine groups. Then, the amine‐group‐containing poly(amide imide) copolymers were cyclized at 180°C to form the poly(benzimidazole imide amide) copolymers in poly(phosphoric acid), which acted as a cyclizing agent. The resultant copolymers were soluble in sulfuric acid and poly(phosphoric acid) at room temperature and in sulfolane or N‐methyl‐2‐pyrrolidone under heating to 100°C with 5% lithium chloride. According to wide‐angle X‐ray diffraction, all the copolymers were amorphous. According to thermal analysis, the glass‐transition temperature ranged from 270 to 322°C, and the 10% weight‐loss temperature ranged from 460 to 541°C in nitrogen and from 441 to 529°C in air. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 378–386, 2004  相似文献   

6.
Thermostable poly(amide-imide)s containing parameta benzoic structure were synthesized by reacting a parameta benzoic polyamide prepolymer with various diisocyanate-terminated polyimide prepolymers. The polyamide prepolymers were prepared by first reacting m-phenylene diamine and isophthaloyl dichloride to form a poly(m-phenylphthalamide) prepolymer, then the terephthaloyl dichloride was subsequently added to form a parameta benzoic polyamide prepolymer. The polyimide prepolymers were also prepared by using 4,4′-diphenylmethane disocyanate to react with pyromellitic dianhydride, 3,3′,4,4′-benzophenonetetracarboxylic dianhydride, or 3,3′,4,4′-sulfonyldiphthalic anhydride using the direct one-pot method to improve their solubility, but without sacrificing thermal and physical properties. From the experimental results, the inherent viscosity of the copolymers was 0.72–1.15 dL/g and they were readily soluble in a wide range of organic hot solvents such as N-methyl-2-pyrrolidone, dimethylimidazole, N,N-dimethylacetamide, dimethyl sulfoxide, and N,N-dimethylformamide; however, some of the copolymers were not soluble in pyridine. The solubility was related to their chemical structure. Those copolymers with sulfonyl and high amide content displayed good solubility. All the poly(amide-imide)s had a glass transition temperature of 260–324°C, but the melting point did not vary much. The 10% weight loss temperatures were in a range of 463–580°C in nitrogen and 450–555°C in an air atmosphere. The tensile strength, elongation at break, and initial modulus of the copolymer films ranged from 59 to 102 MPa, 3.1 to 5.1%, and 1.52 to 3.59 GPa, respectively. These copolymers, except those of high imide content (e.g., P-6, B-4, B-6 and D-6), which showed an amorphous structure, mostly display a crystalline morphology. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 2671–2679, 1999  相似文献   

7.
Thermostable naphthalate-containing copoly(amide-imide)s with inherent viscosity of 0.53–0.96 dL/g were synthesized by reacting diacid-terminated naphthalate monomers with various diisocyanate-terminated polyimide prepolymers. The poly-imide prepolymers were prepared by using 4,4′-diphenylmethane diisocyanate to react with 3,3′,4,4′-benzophenonetetracarboxylic dianhydride, pyromellitic dianhydride, or 3,3′,4,4′-sulfonyl diphthalic anhydride using a direct one-pot method to improve their solubility without sacrificing their thermal properties. The copolymers, except the B-2 and P-2 series, can be dissolved in N,N-dimethylacetamide and 5% lithium chloride or dimethyl sulfoxide at high temperature but are not soluble in pyridine. The solubility of the copolymers is related to their chemical and crystalline structures. Those copolymers with sulfonyl or amorphous structures display good solubility. All the naphthalate-containing copoly(amide-imide)s have glass transition temperatures and melting points in the range of 223–312°C and 348–366°C, respectively, and show a 10% weight-loss temperature of 485–549°C in air and 465–564°C in a nitrogen atmosphere. The tensile strength, elongation at break, and initial modulus of polymer films range from 25–74 MPa, 4–9%, and 0.74–1.60 GPa, respectively. From the X-ray diffraction studies, copolymers of B-2, P-2, and D-2 with symmetrical 2,6-naphthalate amide structure are crystalline, but the others are amorphous. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65:1581–1593, 1997  相似文献   

8.
A diamine containing a pendant phenoxy group, 1-phenoxy-2,4-diaminobenzene, was synthesized and condensed with different aromatic dianhydrides [4,4′-oxydiphthalic dianhydride, 4,4′-(hexafluoroisopropylidene)diphthalic anhydride, 3,3′,4,4′-benzophenone tetracarboxylic dianhydride, 3,3′,4,4′-biphenyltetracorboxylic dianhydride, and pyromellitic dianhydride] by one-step synthesis at a high temperature in m-cresol to obtain polyimides in high yields. Most of the polyimides exhibited good solvent solubility and could be readily dissolved in chloroform, sym-tetrachloroethane, N,N-dimethylformamide, N,N-dimethylacetamide, and nitrobenzene. Their inherent viscosities were in the range of 0.33–1.16 dL/g. Wide-angle X-ray spectra revealed that these polymers were amorphous in nature. All these polyimides were thermally stable, having initial decomposition temperatures above 500°C and glass-transition temperatures in the range of 248–281°C. The gas permeability of 4,4′-oxydiphthalic dianhydride and 4,4′-(hexafluoroisopropylidene)diphthalic anhydride based polyimides was investigated with pure gases: He, H2, O2, Ar, N2, CH4, and CO2. A polyimide containing a  C(CF3)2 linkage showed a good combination of permeability and selectivity. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008  相似文献   

9.
4,4′‐Diamino‐3,3′‐dimethyldiphenylmethane was used to prepare polyimides in an attempt to achieve good organo‐solubility and light color. Polyimides based on this diamine and three conventional aromatic dianhydrides were prepared by solution polycondensation followed by chemical imidization. They possess good solubility in aprotonic polar organic solvents such as N‐methyl 2‐pyrrolidone, N,N‐dimethyl acetamide, and m‐cresol. Polyimide from 4,4′‐diamino‐3,3′‐dimethyldiphenylmethane and diphenylether‐3,3′,4,4′‐tetracarboxylic acid dianhydride is even soluble in common solvents such as tetrahydrofuran and chloroform. Polyimides exhibit high transmittance at wavelengths above 400 nm. The glass transition temperature of polyimide from 4,4′‐diamino‐3,3′‐dimethyldiphenylmethane and pyromellitic dianhydride is 370°C, while that from 4,4′‐diamino‐3,3′‐dimethyldiphenylmethane and diphenylether‐3,3′,4,4′‐tetracarboxylic acid dianhydride is about 260°C. The initial thermal decomposition temperatures of these polyimides are 520–540°C. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1299–1304, 1999  相似文献   

10.
Dynamic mechanical properties have been investigated over the temperature range of?150–360°C for the quinazolone–imide copolymers, prepared by condensation of the amine-terminated quinazolone prepolymer with a stoichiometric quantity of pyromellitic dianhydride or 3,3′,4,4′-benzophenone-tetracarboxilic dianhydride. Both copolymers have, respectively, the low-temperature β-relaxation and the β*-relaxation, as well as the case of poly(4,4′-oxydiphenylene–pyromellite-imide) (Kapton) examined for comparison. These relaxations seem to contribute to toughness of the copolymers. The α-relaxations for both copolymers occurred at much the same temperature of 320°C, which can be assigned to a large scale segmental motion of the quinazolone chain sequence. The α-peak temperatures shifted into higher temperatures by heat aging. This can be explained in terms of crosslinking in the copolymers, supported by swelling test in hot m-cresol and IR spectroscopy.  相似文献   

11.
In this study, 3,3′‐dinitrobenzidine was first reacted with excess isophthaloyl chloride to form a monomer with dicarboxylic acid end groups. Two types of aromatic dianhydride, [viz., pyromellitic dianhydride (PMDA) and 3,3′,4,4′‐sulfonyldiphthalic anhydride (DSDA)] also were reacted with excess 4,4′‐diphenyl‐ methane diisocyanate (MDI) to form polyimide prepolymers terminated with isocyanate groups. The prepolymers were reacted further with the diacid monomer to form a nitro group–containing aromatic poly(amide imide) copolymers. The nitro groups in these copolymers were hydrogenated to form amine groups and cyclized at 180°C to form the poly(benzimidazole amide imide) copolymers in polyphosphoric acid (PPA), which acts as a cyclization agent. From the viscosity measurements, copolymer appeared to be a reasonably high molecular weight. From the differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) measurements it was shown that the glass transition temperature of copolymers was in the range of ~270–322°C. The 10% weight loss temperatures were in the range of 460 ~ 541°C in nitrogen and ~441–529°C in air, respectively. The activated energy and the integration parameter of degradation temperature of the copolymers were evaluated with the Doyle‐Ozawa method. It indicated that these copolymers have good thermal and thermo‐oxidative stability with the increase in imide content. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2072–2081, 2004  相似文献   

12.
Three novel aromatic phosphorylated diamines, i.e., bis N,N′‐{3‐[(3‐aminophenyl)methyl phosphinoyl] phenyl} pyromellitamic acid (AP), 4,4′‐oxo bis N,N′‐{3‐[(3‐aminophenyl)methyl phosphinoyl] phenyl}phthalamic acid (AB) and 4,4′‐hexafluoroisopropylidene‐bis N,N′‐{3‐[(3‐aminophenyl)methyl phosphinoyl] phenyl}phthalamic acid (AF) were synthesized and characterized. These amines were prepared by solution condensation reaction of bis(3‐aminophenyl)methyl phosphine oxide (BAP) with 1,2,4,5‐benzenetetracarboxylic acid anhydride (P)/3,3′,4,4′‐benzophenonetetracarboxylic acid dianhydride (B)/4,4′‐(hexafluoroisopropylidene)diphthalic acid anhydride (F), respectively. The structural characterization of amines was done by elemental analysis, DSC, TGA, 1H‐NMR, 13C‐NMR and FTIR. Amine equivalent weight was determined by the acetylation method. Curing of DGEBA in the presence of phosphorylated amines was studied by DSC and curing exotherm was in the temperature range of 195–267°C, whereas with conventional amine 4,4′‐diamino diphenyl sulphone (D) a broad exotherm in temperature range of 180–310°C was observed. Curing of DGEBA with a mixture of phosphorylated amines and D, resulted in a decrease in characteristic curing temperatures. The effect of phosphorus content on the char residue and thermal stability of epoxy resin cured isothermally in the presence of these amines was evaluated in nitrogen atmosphere. Char residue increased significantly with an increase in the phosphorus content of epoxy network. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2235–2242, 2002  相似文献   

13.
A series of new cardo poly(ether imide)s bearing flexible ether and bulky xanthene pendant groups was prepared from 9,9‐bis[4‐(4‐aminophenoxy)phenyl]xanthene with six commercially available aromatic tetracarboxylic dianhydrides in N,N‐dimethylacetamide (DMAc) via the poly(amic acid) precursors and subsequent thermal or chemical imidization. The intermediate poly(amic acid)s had inherent viscosities between 0.83 and 1.28 dL/g, could be cast from DMAc solutions and thermally converted into transparent, flexible, and tough poly(ether imide) films which were further characterized by X‐ray and mechanical analysis. All of the poly(ether imide)s were amorphous and their films exhibited tensile strengths of 89–108 MPa, elongations at break of 7–9%, and initial moduli of 2.12–2.65 GPa. Three poly(ether imide)s derived from 4,4′‐oxydiphthalic anhydride, 4,4′‐sulfonyldiphthalic anhydride, and 2,2‐bis(3,4‐dicarboxyphenyl))hexafluoropropane anhydride, respectively, exhibited excellent solubility in various solvents such as DMAc, N,N‐dimethylformamide, N‐methyl‐2‐pyrrolidinone, pyridine, and even in tetrahydrofuran at room temperature. The resulting poly(ether imide)s with glass transition temperatures between 286 and 335°C had initial decomposition temperatures above 500°C, 10% weight loss temperatures ranging from 551 to 575°C in nitrogen and 547 to 570°C in air, and char yields of 53–64% at 800°C in nitrogen. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012  相似文献   

14.
A novel aromatic diamine, 3,3′‐diisopropyl‐4,4′‐diaminophenyl‐4″‐methyltoluene with a 4‐methylphenyl pendant group and isopropyl side groups, was designed and synthesized in this study. Then it was polymerized with various aromatic dianhydrides including pyromellitic dianhydride, 3,3′,4,4′‐biphenyltetracarboxylic dianhydride, 4,4′‐oxydiphthalic anhydride, 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride and 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride via a one‐pot high temperature polycondensation procedure to produce a series of aromatic polyimides. These polyimides exhibited excellent solubility even in common organic solvents, such as chloroform and tetrahydrofuran. The flexible and tough films can be conveniently obtained by solution casting. The films were nearly colorless and exhibited high optical transparency, with the UV cutoff wavelength in the range 302–365 nm and the wavelength of 80% transparency in the range 385–461 nm. Moreover, they showed low dielectric constants (2.73–3.23 at 1 MHz) and low moisture absorption (0.13%–0.46%). Furthermore, they also possessed good thermal and thermo‐oxidative stability with 10% weight loss temperatures (T10%) in the range 489–507 °C in a nitrogen atmosphere. The glass transition temperatures of all polyimides are in the range 262–308 °C. Copyright © 2012 Society of Chemical Industry  相似文献   

15.
A series of silatrane based imide resins having different end-caps were prepared by reacting 1-(3-aminopropyl)silatrane with 5-norbornene-endo-2,3-dicarboxylic anhydride (nadic anhydride), 5-methyl-5-norbornene-2,3-dicarboxylic anhydride (methyl nadic anhydride), hexachloronadic anhydride, maleic anhydride, benzophenone-3,3′,4,4′-tetracarboxylic dianhydride or pyromellitic dianhydride in dimethylacetamide. Structural characterisation of the resins was done by elemental analysis and IR. In DSC traces of these resins, an exothermic transition associated with crosslinking was observed above 230°C. Thermogravimetric studies revealed a multistep decomposition reaction. Residual weight at 800°C in nitrogen was found to depend on the backbone structure and ranged from 32–60%.  相似文献   

16.
Trimellitic anhydride was reacted with 4,4′‐diaminodiphenyl ether in a mixture of acetic acid and pyridine (3 : 2) at room temperature and was refluxed at 90–100°C, and N,N′‐(4,4′‐diphenylether) bistrimellitimide (3) was obtained in a quantitative yield. 3 was converted into N,N′‐(4,4′‐diphenylether) bistrimellitimide diacid chloride (4) by a reaction with thionyl chloride. Then, six new poly(amide imide)s were synthesized under microwave irradiation with a domestic microwave oven through the polycondensation reactions of 4 with six different derivatives of 5,5‐disubstituted hydantoin in the presence of a small amount of a polar organic medium such as o‐cresol. The polycondensation proceeded rapidly and was completed within 7–10 min, producing a series of new poly(amide imide)s in high yields with inherent viscosities of 0.27–0.66 dL/g. The resulting poly(amide imide)s were characterized by elemental analysis, viscosity measurements, differential scanning calorimetry, thermogravimetric analysis, derivative thermogravimetry, solubility testing, and Fourier transform infrared spectroscopy. All the polymers were soluble at room temperature in polar solvents such as N,N‐dimethylacetamide, N,N‐dimethylformamide, dimethyl sulfoxide, tetrahydrofuran, and N‐methyl‐2‐pyrrolidone. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3447–3453, 2004  相似文献   

17.
3,3′‐Diaminodiphenyl sulfone (3,3′‐DDS) was reacted with acetaldehyde in the presence of sodium triacetoxy borohydride via reductive amination to yield a 3,3′‐DDS based secondary diamine, N,N′‐diethyl‐3,3′‐diaminodiphenyl sulfone. Near IR analysis indicated that the 5060 cm?1 peak for primary amine (? NH2) in 3,3′‐DDS was absent in the reaction product spectrum. The ? NH2 proton peak at δ 5.66 ppm shifted to δ 6.16 ppm in the product. Methyl and methylene protons of CH3? CH2? NH? Ph? group were observed at δ 3.01 and 1.12 ppm, respectively, in the product. The carbon NMR spectrum of the reaction product showed new peaks at δ 37.46 and 14.47 ppm that further confirmed secondary amine formation. The liquid chromatography coupled mass spectra peaks at 248–250 for 3,3′‐DDS and 304 for the reaction product further supported the formation of N,N′‐diethyl‐3,3′‐diaminodiphenyl sulfone. A blend of N,N′‐diethyl‐3,3′‐diaminodiphenyl sulfone with diglycidyl ether of bisphenol‐A (DGEBA) epoxy prepolymer started reacting at about 110–125°C surpassing an energy barrier of ~ 66 kJ/mol as determined via differential scanning calorimetry analysis. Reaction kinetics were characterized via near IR spectroscopy specific to the reaction between secondary amine and DGEBA epoxy prepolymer. The results confirmed >97% conversion at a cure protocol of 5 h at 80°C, 5 h at 100°C, 11 h at 125°C, and 6 h at 185°C. N,N′‐diethyl‐3,3′‐diaminodiphenyl sulfone‐DGEBA thermoplastics displayed tensile and flexural modulii of 3.08 and 2.86 GPa, respectively, and glass transition temperature (Tg) of 120.77°C. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012  相似文献   

18.
A new diimide–diacid chloride (3) containing a noncoplanar 2,2′‐dimethyl‐4,4′‐biphenylene unit was synthesized by treating 2,2′‐dimethyl‐4,4′‐diamino‐biphenylene with trimellitic anhydride followed by refluxing with thionyl chloride. Various new poly(ester‐imide)s were prepared from 3 with different bisphenols by solution polycondensation in nitrobenzene using pyridine as hydrogen chloride quencher at 170°C. Inherent viscosities of the poly(ester‐imide)s were found to range between 0.31 and 0.35 dL g?1. All of the poly(ester‐imide)s, except the one containing pendent adamantyl group 5e, exhibited excellent solubility in the following solvents: N,N‐dimethylformamide, tetrahydrofuran, tetrachloroethane, dimethyl sulfoxide, N,N‐dimethylacetamide, N‐methyl‐2‐pyrrolidinone, m‐cresol, o‐chlorophenol, and chloroform. The polymers showed glass‐transition temperatures between 166 and 226°C. The 10% weight loss temperatures of the poly(ester‐imide)s, measured by TGA, were found to be in the range between 415 and 456°C in nitrogen. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2486–2493, 2004  相似文献   

19.
This paper describes the synthesis of 3,3′bis(2,2′,4,4′,6,6′-hexanitrostilbene) (5). Based on the Ullmann reaction we prepared the title compound in nitrobenzene by using 3-chloro 2,2′,4,4′,6,6′-hexanitroztilbene (4) as the starting material and copper powder as the catalyst. (4) was reacted with hydrazine, not to yield a desired product, azo-3,3′bist(2,2′,4,4′,6,6′-hexanitrostilbene.) but to form a well-known explosive, 2,2′,4,4′,6,6′-hexanitrostibene (6). Differential scanning calorimetrical analysis has shown that (5) begins to decompose at the temperature of 298°C.  相似文献   

20.
Two series of aromatic polyimides containing various linkage groups based on 2,7‐bis(4‐aminophenoxy)naphthalene or 3,3′‐dimethyl‐4,4′‐diaminodiphenylmethane and different aromatic dianhydrides, namely 4,4′‐(4,4′‐isopropylidenediphenoxy)bis(phthalic anhydride), 4,4′‐(hexafluoroisopropylidene)bis(phthalic anhydride), 3,3′,4,4′ benzophenonetetracarboxylic dianhydride, 9,9‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]fluorene dianhydride and 4,4′‐(4,4′‐hexafluoroisopropylidenediphenoxy)bis(phthalic anhydride), were synthesized and compared with regard to their thermal, mechanical and gas permeation properties. All these polymers showed high thermal stability with initial decomposition temperature in the range 475–525 °C and glass transition temperature between 208 and 286 °C. Also, the polymer films presented good mechanical characteristics with tensile strength in the range 60–91 MPa and storage modulus in the range 1700–2375 MPa. The macromolecular chain packing induced by dianhydride and diamine segments was investigated by examining gas permeation through the polymer films. The relationships between chain mobility and interchain distance and the obtained values for gas permeability are discussed. © 2014 Society of Chemical Industry  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号