Effect of nano-SiO2 on the compatibility of PVA/RSF blend

A series of poly(vinyl alcohol) (PVA)/regenerated silk fibroin (RSF)/nano-silicon dioxide (nano-SiO₂) blend films were prepared by solution casting method, in which nano-SiO₂ was obtained via sol?Cgel process. The structure, properties, and morphology of the films related to the compatibility were investigated by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). XRD peaks of PVA/RSF/nano-SiO₂ (1.0?wt?%) blends decreased in intensity indicated that formation of PVA and RSF crystal lattices was hindered by nano-SiO₂ particles. FTIR spectroscopy analysis of PVA/RSF/nano-SiO₂ films confirmed that both Si?CO?CC linkage and hydrogen bonding were formed among PVA, RSF, and nano-SiO₂. SEM showed that there was no obvious phase separation in PVA/RSF/nano-SiO₂ (1.0?wt?%) film although small uniform blur particles can still be found. In addition, TEM showed nano-particles were well dispersed through the PVA/RSF polymer matrix. Besides, the observed shift in glass transition temperatures (T _g) and improvement in thermal properties of composite films suggested the enhanced compatibility due to interfacial bonding and intermolecular interactions. Therefore, these results indicated that the compatibility of PVA/RSF was improved effectively by the addition of nano-SiO₂.     

Characterization of regenerated silk fibroin membranes for immobilizing glucose oxidase and construction of a tetrathiafulvalene-mediating glucose sensor

The IR spectra, the electronic absorption bands, and scanning electron microscopy (SEM) of the blend membranes of regenerated silk fibroin and glucose oxidase were reported for the first time and the second generation of glucose sensor based on glucose oxidase immobilized in the regenerated silk fibroin membrane was first constructed. The IR absorption spectra of the pure regenerated silk fibroin membrane were ascribed to its structural characteristics by which the part transition from silk I to silk II was recognized in ethanol immersion. Those spectra of the blend membrane of regenerated silk fibroin and glucose oxidase were identified as a composite of the absorption bands characteristic of both macromolecules. The electronic absorption bands showed that the glucose oxidase in the membrane exists in aggregates. A sea islands' structure was observed by SEM. These findings suggest that the regenerated silk fibroin and glucose oxidase are incompatible and their molecular interactions are very weak. A tetrathiafulvalene-mediating glucose sensor, employing immobilization of glucose oxidase by regenerated silk fibroin, was fabricated. The influences of temperature, applied potential, and pH on steady-state electrocatalytic oxidation of glucose at the sensor were evaluated. The response of the sensor to glucose under N₂ saturation reached 95% steady-state current within 40 s. The sensor could be used repeatedly for 1.5 months without deterioration of the response. © 1995 John Wiley & Sons, Inc.     

Preparation and characterization of CMCS/PVA blend membranes and its sorption and pervaporation performance (I)

Novel pervaporation (PV) membranes for ethanol dehydration were prepared by blend poly(vinyl alcohol) (PVA) and carboxymethyl chitosan (CMCS), followed by the crosslinking reaction with glutaraldehyde; the structure and miscibility of the blend membranes were characterized by Fourier transform infrared, X‐ray diffraction, and differential scanning calorimetry; the results indicated that the blends were miscible. The effect of feed concentration, operation temperature, crosslinking agent content, etc. on sorption performance and PV performance of the blend membrane is investigated. The membrane of CMCS/PVA blend ratio of 8 : 2 exhibited a high separation factor of 2959 with a reasonably high water flux value of 0.14 kg m^?2h^?1 at the azeotropic feed composition (95 wt % of ethanol) at a temperature of 45°C. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Morphology of regenerated silk fibroin: Effects of freezing temperature,alcohol addition,and molecular weight

Regenerated silk fibroin (RSF) was prepared by dissolving in a CaCl₂/ethanol/H₂O solvent system, freezing, and lyophilization. The effect of freezing temperature, alcohol addition, and molecular weight on the morphological and conformational changes were investigated through scanning electron microscopy, X‐ray diffraction, Fourier transform infrared spectroscopy, circular dichroism spectroscopy, and differential scanning calorimetry analysis. However, the addition of a small amount of methanol induced the morphological change of RSF to a fine‐particle aggregate, which resulted from the formation of a β‐sheet crystalline structure. The lower the freezing temperature was, the more the formation of aggregates was favored, and the finer powder aggregates were formed. As the amount of added hydrophilic alcohol such as methanol and ethanol increased in the silk fibroin solution, a spherical powder form was changed to fine aggregates with the enhancement of thermal stability and crystallinity. On the other hand, RSFs prepared with a hydrophobic alcohol such as 1‐butanol or 1‐octanol showed a lump‐like or sheet‐like shape of morphology without any changes in conformational transition. It is concluded that the molecular weight of the silk fibroin and the type and amount of alcohol were determining factors in the morphological features of RSF, especially the size and shape of fibroin particles. A uniform ultrafine powder of RSF with a spherical form (～ 1 μm) can be obtained when the molecular weight and the alcohol addition to the silk fibroin solution are controlled. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 3008–3021, 2001     

Preparation of a PVA/HAP composite polymer membrane for a direct ethanol fuel cell (DEFC)

A novel PVA/Hydroxyapatite (HAP) composite polymer membrane was prepared by the direct blend process and solution casting method. The characteristic properties of the PVA/HAP composite polymer membranes were investigated using thermal gravimetric analysis (TGA), X-ray diffraction (XRD), scanning electron microscopy (SEM), micro-Raman spectroscopy and the AC impedance method. An alkaline direct ethanol fuel cell, consisting of an air cathode with MnO₂ carbon inks based on Ni-foam, an anode with PtRu black on Ni-foam, and the PVA/HAP composite polymer membrane, was assembled and investigated. It was found that the alkaline direct ethanol fuel cell comprising of a novel cheap PVA/HAP composite polymer membrane showed an improved electrochemical performance in ambient temperature and air. As a result, the maximum power density of the alkaline DEFC, using a PtRu anode based on Ni-foam (10.74 mW cm⁻²), is higher than that of DEFC using an E-TEK PtRu anode based on carbon (7.56 mW cm⁻²) in an 8M KOH + 2M C₂H₅OH solution at ambient temperature and air. These PVA/HAP composite polymer membranes are a potential candidate for alkaline DEFC applications.     

Phase separation structure in poly(vinyl alcohol)/silk fibroin blend films

Blend films of a commercial poly(vinyl alcohol) (a-PVA) derived from vinyl acetate and silk fibroin (SF) obtained from degummed silk were prepared by mixing the aqueous solutions of both samples. A plain weave structure was recognized only in the blend films, whereas no structure was found for the superimposed films of both samples. The phase separation structure of the blend films was examined by microscopic observations elongation, tensile tests, and IR measurements. The microphase separation region increased with increase in the degree of polymerization of the PVA. In the IR spectra of the blend films with high PVA contents cast under certain conditions, the absorption peak attributed to the cross-β-form conformation of SF appeared strongly. Gelatin, a water-soluble and natural polymer, was also used for comparison with SF. The ternary phase diagram in an a-PVA/gelatin/H₂O system was obtained experimentally and the critical point was used to estimate the interaction parameter between PVA and gelatin molecules. The phase separation structure and the interaction between PVA and SF molecules were also discussed taking into consideration the results of the a-PVA/gelatin system. © 1998 SCI.     

Characterization of sodium alginate and poly(vinyl alcohol) blend membranes in pervaporation separation

By blending a rigid polymer, sodium alginate (SA), and a flexible polymer, poly(vinyl alcohol) (PVA), SA/PVA blend membranes were prepared for the pervaporation separation of ethanol–water mixtures. The rigid SA membrane showed a serious decline in flux and a increase in separation factor due to the relaxation of polymeric chains, whereas the flexible PVA membrane kept consistent membrane performance during pervaporation. Compared with the nascent SA membrane, all of the blend membranes prepared could have an enhanced membrane mobility by which the relaxation during pervaporation operation could be reduced. From the pervaporation separation of the ethanol–water mixtures along with the temperature range of 50–80°C, the effects of operating temperature and PVA content in membrane were investigated on membrane performance, as well as the extent of the relaxation. The morphology of the blend membrane was observed with PVA content by a scanning electron microscopy. The relaxational phenomena during pervaporation were also elucidated through an analysis on experimental data of membrane performance measured by repeating the operation in the given temperature range. SA/PVA blend membrane with 10 wt % of PVA content was crosslinked with glutaraldehyde to enhance membrane stability in water, and the result of pervaporation separation of an ethanol–water mixture through the membrane was discussed. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67:949–959, 1998     

Self-assembled silk fibroin particles: Tunable size and appearance

Silk fibroin had various applications especially outstanding for drug delivery due to its protein component, biocompatibility and biodegradability. In this paper, silk fibroin particles were prepared via self-assembly. Their sizes and appearances could be modified by adjusting of volume ratios among poly vinyl alcohol (PVA), silk fibroin and ethanol. Regular silk particles were formed in PVA solution when the volume ratio of silk to ethanol ranged from 2 to 20. Preparation pathways could be concluded as 1) mixing ethanol with silk fibroin solution, 2) blending the silk fibroin/ethanol solution with PVA, 3) freezing the ternary solution for 48 h and collection of silk fibroin particles via thaw and centrifugation. Silk particles with various appearances were also obtained by addition of concentrated PVA solution. Silk particles reported have potential as drug delivery carriers in a variety of biomedical applications.     

Polyvinyl alcohol/polysulfone (PVA/PSF) hollow fiber composite membranes for pervaporation separation of ethanol/water solution

Polysulfone (PSF) hollow fiber membranes were spun by phase‐inversion method from 29 wt % solids of 29 : 65 : 6 PSF/NMP/glycerol and 29 : 64 : 7 PSF/DMAc/glycol using 93.5 : 6.5 NMP/water and 94.5 : 5.5 DMAc/water as bore fluids, respectively, while the external coagulant was water. Polyvinyl alcohol/polysulfone (PVA/PSF) hollow fiber composite membranes were prepared after PSF hollow fiber membranes were coated using different PVA aqueous solutions, which were composed of PVA, fatty alcohol polyoxyethylene ether (AEO₉), maleic acid (MAC), and water. Two coating methods (dip coating and vacuum coating) and different heat treatments were discussed. The effects of hollow fiber membrane treatment methods, membrane structures, ethanol solution temperatures, and MAC/PVA ratios on the pervaporation performance of 95 wt % ethanol/water solution were studied. Using the vacuum‐coating method, the suitable MAC/PVA ratio was 0.3 for the preparation of PVA/PSF hollow fiber composite membrane with the sponge‐like membrane structure. Its pervaporation performance was as follows: separation factor (α) was 185 while permeation flux (J) was 30g/m²·h at 50°C. Based on the experimental results, it was found that separation factor (α) of PVA/PSF composite membrane with single finger‐void membrane structure was higher than that with the sponge‐like membrane structure. Therefore, single finger‐void membrane structure as the supported membrane was more suitable than sponge‐like membrane structure for the preparation of PVA/PSF hollow fiber composite membrane. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 247–254, 2005     

Preparation and characterization of LDPE/PVA blend films filled with glycerin‐plasticized polyvinyl alcohol

A series of LDPE/PVA blend films were prepared via a twin‐screw extruder, and their morphology, thermal property, oxygen and water vapor permeation, surface properties, and mechanical properties were investigated as a function of the PVA content. During the extrusion process of the blend films, glycerin improved the compatibility and processing conditions between LDPE and PVA. The melting temperature (T_m), melting enthalpy (ΔH_m), crystallinity (%), and thermal stability of the thermal decomposition temperature (T_5%) of the LDPE/PVA blend films decreased with increasing PVA content. The oxygen permeabilities of the blend films decreased from 24.0 to 11.4 cm³·cm (m²·day·atm)^?1 at 23°C. The WVTR increased from 7.8 to 15.0 g(m² day)^?1 and the water uptake increased from 0.13 to 9.31%, respectively. The mechanical properties of blend films were slightly enhanced up to 2% PVA and then decreased. The physical properties of the blend films strongly varied with the chemical structure and morphology depending on the PVA and glycerin. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41985.     

Controlled mechanical and swelling properties of poly(vinyl alcohol)/sodium alginate blend hydrogels prepared by freeze–thaw followed by Ca2+ crosslinking

Poly(vinyl alcohol) (PVA)/sodium alginate (SA) blend hydrogels have immense potential for use as functional biomaterials. Understanding of influences of processing parameters and compositions on mechanical and swelling properties of PVA/SA blend hydrogels is very important. In this work, PVA/SA blend hydrogels with different SA contents were prepared by applying freeze–thaw method first to induce physical crosslinking of PVA chains and then followed by Ca²⁺ crosslinking SA chains to form interpenetrating networks of PVA and SA. The effects of number of freeze–thaw cycles, SA content and Ca²⁺ concentration on mechanical properties, swelling kinetics, and pH‐sensitivity of the blend hydrogels were investigated. The results showed that the blend hydrogels have porous sponge structure. Gel fraction, which is related to crosslink density of the blend hydrogels, increased with the increase of freeze–thaw cycles and strongly depended on SA content. The SA content exerts a significant effect on mechanical properties, swelling kinetics, and pH‐sensitivity of the blend hydrogels. The number of freeze–thaw cycles has marked impact on mechanical properties, but no obvious effect on the pH‐sensitivity of the PVA/SA blend hydrogels. Concentration of CaCl₂ aqueous solution also influences mechanical properties and pH‐sensitivity of the blend hydrogel. By altering composition and processing parameters such as freeze–thaw cycles and concentration of CaCl₂ aqueous solution, the mechanical properties and pH‐sensitivity of PVA/SA blend hydrogels can be tightly controlled. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Modification of Thin Film Composite PVA/PAN Membranes for Pervaporation Using Aluminosilicate Nanoparticles

The effect of the modification of the polyvinyl alcohol (PVA) selective layer of thin film composite (TFC) membranes by aluminosilicate (Al₂O₃·SiO₂) nanoparticles on the structure and pervaporation performance was studied. For the first time, PVA-Al₂O₃·SiO₂/polyacrylonitrile (PAN) thin film nanocomposite (TFN) membranes for pervaporation separation of ethanol/water mixture were developed via the formation of the selective layer in dynamic mode. Selective layers of PVA/PAN and PVA-Al₂O₃·SiO₂/PAN membranes were formed via filtration of PVA aqueous solutions or PVA-Al₂O₃·SiO₂ aqueous dispersions through the ultrafiltration PAN membrane for 10 min at 0.3 MPa in dead-end mode. Average particle size and zeta potential of aluminosilicate nanoparticles in PVA aqueous solution were analyzed using the dynamic light scattering technique. Structure and surface properties of membranes were studied using scanning electron microscopy (SEM), atomic force microscopy (AFM) and water contact angle measurements. Membrane performance was investigated in pervaporation dehydration of ethanol/water mixtures in the broad concentration range. It was found that flux of TFN membranes decreased with addition of Al₂O₃·SiO₂ nanoparticles into the selective layer due to the increase in selective layer thickness. However, ethanol/water separation factor of TFN membranes was found to be significantly higher compared to the reference TFC membrane in the whole range of studied ethanol/water feed mixtures with different concentrations, which is attributed to the increase in membrane hydrophilicity. It was found that developed PVA-Al₂O₃·SiO₂/PAN TFN membranes were more stable in the dehydration of ethanol in the whole range of investigated concentrations as well as at different temperatures of the feed mixtures (25 °C, 35 °C, 50 °C) compared to the reference membrane which is due to the additional cross-linking of the selective layer by formation hydrogen and donor-acceptor bonds between aluminosilicate nanoparticles and PVA macromolecules.     

CO2-facilitated transport membranes prepared by blending polyvinyl alcohol and various water-absorbing agents

This study describes the production of a membrane by blending polyvinyl alcohol (PVA) and water-absorbing agents for the selective permeation of CO₂ by optimizing the type of water-absorbing agent and its ratio to PVA. A CO₂-facilitated transport membrane is prepared by adding an aqueous cesium carbonate solution to a coated polymer blend matrix. When sodium polyacrylate (PAANa) is blended with PVA as a water-absorbing agent, the resulting membrane shows promising heat and pressure resistances and a relatively high CO₂/He separation performance. Particularly, the CO₂/He selectivity of the membrane composed of PVA, PAANa, and another water-absorbing agent exceeds 400 under a total pressure of 0.1 MPa and a CO₂ partial pressure of 0.08 MPa at 85°C. Moreover, the CO₂/He selectivity is approximately 100 even under a total pressure of 0.7 MPa and a CO₂ partial pressure of 0.56 MPa. Thus, a high-performance CO₂ separation membrane at 85°C is produced.     

Preparation of water‐swollen hydrogel membranes for gas separation

Water‐swollen hydrogel (WSH) membranes for gas separation were prepared by the dip‐coating of asymmetric porous polyetherimide (PEI) membrane supports with poly(vinyl alcohol) (PVA)–glutaraldehyde (GA), followed by the crosslinking of the active layer by a solution method. Crosslinked PVA/GA film of different blend compositions (PVA/GA = 1/0.04, 0.06, 0.08, 0.10, 0.12 mol %) were characterized by differential scanning calorimetry (DSC) and their water‐swelling ratio. The swelling behavior of PVA/GA films of different blend compositions was dependent on the crosslinking density and chemical functional groups created by the reaction between PVA and GA, such as the acetal group, ether linkage, and unreacted pendent aldehydes in PVA. The permeation performances of the membranes swollen by the water vapor contained in a feed gas were investigated. The behavior of gas permeation through a WSH membrane was parallel to the swelling behavior of the PVA/GA film in water. The permeation rate of carbon dioxide through the WSH membranes was 10⁵ (cm³ cm^?2 s^?1 cmHg) and a CO₂/N₂ separation factor was about 80 at room temperature. The effect of the additive (potassium bicarbonate, KHCO₃) and catalyst (sodium arsenite, NaASO₂) on the permeation of gases through these WSH membranes was also studied. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1785–1791, 2001     

丝素蛋白/聚丙烯酸共混膜仿生合成羟基磷灰石

将丝素蛋白(SF)与聚丙烯酸(PAA)共混,制备丝素蛋白/聚丙烯酸(SF/PAA)共混膜;然后将此共混膜进行改性及矿化处理后,放置于(37±0.5)℃人体仿生液中24h,诱导合成丝素蛋白/羟基磷灰石(SF/HA)复合材料.利用傅里叶红外(FTIR)、X-射线衍射(XRD)、环境扫描电镜(ESEM)以及X射线能谱(EDX...     

Characteristics of the nanofiltration composite membranes based on PVA and sodium alginate

Chemically stable nanofiltration (NF) composite membranes based on poly(vinyl alcohol) (PVA) and sodium alginate (SA) (hereafter, these membranes are called PVA/SA composite membranes) were prepared by coating microporous polysulfone (PSF) supports with dilute PVA/SA blend solutions. The PSF supports were pretreated with small monomeric compounds to reduce their pore size and to improve their hydrophilicity before coating with the PVA/SA blend solutions. The concentration of the PVA/SA blend solutions ranged from 0.1 to 0.3 wt %. The membranes prepared in this study were characterized with various methods such as SEM, FTIR, permeation tests, and z‐potential measurements. Especially, chemical stabilities of the membranes were tested, using three aqueous solutions with different pHs such as a HCl solution (pH 1), a K₂CO₃ solution (pH 12.5), and a NaOH solution (pH 13). Their chemical stabilities were compared with that of a polyamide (PA) composite membrane prepared from piperazine (PIP) and trimesoyl chloride (TMC). In this study, it was found that the PVA/SA composite membranes prepared showed not only good chemical stabilities but also good permeation performances in the range from pH 1 to 13. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 79: 2471–2479, 2001     

Properties of soy protein isolate/poly(vinyl alcohol) blend “green” films: Compatibility,mechanical properties,and thermal stability

Blend films from nature soy protein isolates (SPI) and synthetical poly(vinyl alcohol) (PVA) compatibilized by glycerol were successfully fabricated by a solution‐casting method in this study. Properties of compatibility, mechanical properties, and thermal stability of SPI/PVA films were investigated based on the effect of the PVA concentration. XRD tests confirm that the SPI/PVA films were partially crystalline materials with peaks of 2θ = 20°. And, the addition of glycerol will insert the crystalline structure and destroy the blend microstructure of SPI/PVA. Differential scanning calorimetry (DSC) tests show that SPI/PVA blend polymers have a single glass transition temperature (T_g) between 80 and 115.0°C, which indicate that SPI and PVA have good compatibility. The tension tests show that SPI/PVA films exhibit both higher tensile strength (σ_b) and percentage elongation at break point (P.E.B.). Thermogravimetric analysis (TGA) and water solubility tests show that SPI/PVA blend polymer has more stable stability than pure SPI. All the results reflect that SPI/PVA/glycerol blend film provides a convenient and promising way to prepare soy protein plastics for practical application. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Correlation between structural and dynamic mechanical transitions of regenerated silk fibroin

Dynamic mechanical analysis (DMA) was applied to investigate the correlation between dynamic mechanical behaviors of regenerated silk fibroin (RSF) and its structural transition which was characterized by near-infrared (NIR) spectroscopy. The tan δ peak split of DMA demonstrated that the apparent glass transition of amorphous RSF film (at around 177 °C) was the contribution of both uncrystallizable and crystallizable segments through homogeneous amide-amide hydrogen bonds, which were gradually separated from each other and produced disordered and β-sheet domains during ethanol treatment. Furthermore, DMA was also applied as “thermal fingerprint” to investigate water effect on the disordered domains of silk fibroin. The results showed that glass transition temperature of permanently disordered domains in crystallized RSF films was increased from 155 °C to 190 °C after thermal dehydration, and even approached 205 °C for stretched RSF films.     

Differences in regenerated silk fibroin prepared with different solvent systems: From structures to conformational changes

Dissolution is an important part of silk fibroin (SF) reprocessing, and it is the only way to process it into films, gels, porous scaffold materials, and electrostatic spinning silk fibers. There are a variety of dissolution systems used to dissolve SF. However, few studies have focused on the differences between these different solvent systems. The dissolution of SF with different solvent systems was investigated in this study. Regenerated silk fibroin (RSF) solutions and films were characterized by dynamic light scattering, Fourier transform infrared spectroscopy, differential scanning calorimetry, X‐ray diffraction, and scanning electron microscopy. The results show that the RSF film structures changed with the solvent system, especially LiBr–H₂O. The characterization proved that the random coil did not change into a β‐sheet structure during film formation, and this indicated that its crystal structure and thermal stability was different from others. Interestingly, the differences in the morphologies of all of the RSF films prepared with different solvents were outstanding. Because the mechanism and force of the ion in the solvent systems were different, the SF molecule was hydrolyzed differently in individual solvent systems and produced different hydrolyzed SF molecular chains. These chains had different self‐assembly processes and would lead to RSF products with different microstructures and properties. This suggests that a suitable solvent should be chosen for different uses. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41959.     

Poly(ether sulfone) supported hybrid poly(vinyl alcohol)–maleic acid–silicone dioxide membranes for the pervaporation separation of ethanol–water mixtures

Microporous poly(ether sulfone) (PES) supported hybrid polymer–inorganic membranes were prepared by the crosslinking of poly(vinyl alcohol) (PVA), maleic acid (MA), and SiO₂ via an aqueous sol–gel route and a solution‐casting method. The membrane performance was tested for the pervaporation separation of ethanol–water mixtures from 20 to 60 °C with a feed ethanol concentration of 96 wt %. The membrane characterization results reveal that different SiO₂ loadings affected the crystallinity and roughness of the membranes. The PVA–MA–SiO₂ membrane containing 10 wt % SiO₂ showed that SiO₂ nanoparticles were well dispersed within the polymer matrix; this resulted in significant enhancements in both the flux and selectivity. The membrane achieved a high water permeability of 1202 g·μm·m^?2 h^?1 kPa^?1 and a selectivity of 1027 for the separation of a 96 wt % ethanol‐containing aqueous solution. This enhanced membrane performance might have been due to the dense crosslinking membrane network, increased free volume, and uniform distribution of SiO₂ nanoparticles. Both the water and ethanol fluxes increased with the feed water concentration and temperature. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44839.