Synthesis and swelling characteristics of pH and thermoresponsive interpenetrating polymer network hydrogel composed of poly(vinyl alcohol) and poly(acrylic acid)

The swelling behavior of novel pH- and temperature-sensitive interpenetrating polymer networks (IPNs) composed of poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAAc) in water was investigated. The PVA/PAAc IPN hydrogels were synthesized by UV irradiation, followed by a repetitive freezing and thawing process by which PVA hydrogel networks were formed inside of cross-linked PAAc chains. The swelling behaviors of these IPNs were analyzed in buffer solution at various pH and temperature ranges. Swelling ratios of all IPNs were relatively high, and they showed reasonable sensitivity to both pH and temperature. Hydrogels showed both the positive and negative swelling behaviors depending on PAAc content. IPN46 showed the positive temperature-sensitive swelling behaviors and its stepwise changes in swelling ratio was about 1.8 and 2.0 obtained between 25 and 45°C at pH 7, and between pH 4 and 7 at 35°C, respectively. The positive temperature dependence is attributed to the formation and dissociation of hydrogen bonding complexes between PVA and PAAc. These IPNs are expected to show a pH- and temperature-sensitive drug release according to the stepwise behavior at this temperature region. © 1996 John Wiley & Sons, Inc.     

Drug releasing characteristics of thermo- and pH-sensitive interpenetrating polymer networks based on poly (N-isopropylacrylamide)

Interpenetrating polymer networks (IPNs) of poly(N-isopropylacrylamide)/polyurethane (PNIPAAm/PU) and poly(N-isopropylacrylamide)/poly(acrylic acid) (PNIPAAm/PAA) were synthesized to investigate the swelling and drug releasing behavior. The presence of urethane network in PNIPAAm/PU IPNs improved the mechanical strength, but reduced the swelling and drug releasing rates because of its hydrophobic characteristics. The swelling transition temperatures of PNIPAAm gels were little affected by the incorporation of PU networks in IPN structures. The drug releasing process was analyzed with a simple exponential expression of time dependent fractional drug release. The swelling and drug releasing behavior of PNIPAAm/PAa IPNs was significantly affected by the variation of PAA compositions. The drug release process changed from anomalous to dual type via zero-order mode with increasing PAA concentration due to the competitive swelling rates between PNIPAAm and PAA during release process. The releasing rate decreased in the buffer solution of pH 7.4, but increased in that of pH 5.0 with increasing PAA concentration at both 28 and 37°C because the swelling power of PAA in pH 5.0 was much less than that in pH 7.4. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 64: 2647–2655, 1997     

Characterization of hydrogels based on chitosan and copolymer of poly(dimethylsiloxane) and poly(vinyl alcohol)

Copolymers composed of poly(vinyl alcohol) (PVA) and poly(dimethylsiloxane) (PDMS) were crosslinked with chitosan to prepare semi‐interpenetrating polymer network (IPN) hydrogels by an ultraviolet (UV) irradiation method for application as potential biomedical materials. PVA/PDMS copolymer and chitosan was cast to prepare hydrogel films, followed by a subsequent crosslinking with 2,2‐dimethoxy‐2‐phenylacetophenone as a nontoxic photoinitiator by UV irradiation. Various semi‐interpenetrating polymer networks (semi‐IPNs) were prepared from different weight ratios of chitosan and the copolymer of PVA/PDMS. Photocrosslinked hydrogels exhibited an equilibrium water content (EWC) in the range of 65–95%. Swelling behaviors of these hydrogels were studied by immersion of the gels in various buffer solutions. Particularly, the PCN13 as the highest chitosan weight ratio in semi‐IPN hydrogels showed the highest EWC in time‐dependent and pH‐dependent swelling. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2591–2596, 2002     

Elaboration of ion‐exchange membranes with semi‐interpenetrating polymer networks containing poly(vinyl alcohol) as polymer matrix

Ion‐exchange membranes were prepared with semi‐interpenetrating networks (s‐IPNs) by mixing a film‐forming polymer, poly(vinyl alcohol) (PVA), for the crosslinked matrix and a polyelectrolyte for the specific ion‐exchange property. Poly(sodium styrenesulfonate) (PSSNa), poly(styrenesulfonic acid) (PSSH), and poly(acrylic acid) (PAA) were used as anionic polyelectrolytes. Polyethyleneimine (PEI), poly(1,1‐dimethyl‐3,5‐dimethylenepiperidinium chloride) (PDDPCl), and poly(diallyldimethylammonium chloride) (PDDMACl) were used as cationic polyelectrolytes. Membranes with PVA 60% and polyelectrolyte 40% showed the best compromise among mechanical, homogeneous, and ion‐exchange properties. Gaseous dibromoethane was used as a crosslinking agent to form the PVA network and for efficient entrapment of the polyelectrolyte in the membrane. The crosslinking time (tc) was optimized for each type of membrane and its influence was studied by thermogravimetric analysis of the sample and scanning electron microscopy observations. The best results (large ion‐exchange capacity and small swelling ratio) were obtained for PVA/PAA and PVA/PSSNa/PSSH membranes. Among anion‐exchange membranes, PVA/PEI gave the best permselectivity (low co‐ion leakage) and the highest ion‐exchange capacity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1572–1580, 2002; DOI 10.1002/app.10420     

PH-induced structure change of poly(vinyl alcohol) hydrogel crosslinked with poly(acrylic acid)

The structure of the hydrogel of poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAA) was investigated by small angle X-ray scattering (SAXS) of synchrotron radiation. A physically crosslinked blend gel, which was prepared by repetitive freezing and thawing of an aqueous solution of PVA and PAA, could be chemically crosslinked by esterfication of PVA with PAA even in the hydrogel state. The chemical crosslinking induced the destruction of physical crosslinks into a folded structure, indicating that the chemical crosslinking proceeds at the sites around the physical crosslinks that contain PVA and PAA in much higher concentration than other portion of the gel. The pH-induced structure changes of the PVA hydrogels, chemically crosslinked with poly(acrylic acid) (PAA) were investigated by SAXS on the samples of various chemical crosslinking time. The gels were shrunk at pH4, and swollen at pH8. The results of SAXS showed, that the Porod slope changed with chemical crosslinking time from -3.5 to ?2.9 at pH4, and from ?2.9 to ?2.4 at pH8. The results suggest that a folded structure as a structural domain, which is characterized by fractally rough interface, tends to change into the structure that corresponds to percolation cluster, particularly at pH8. The gels immersed in pH8 showed a remarkable structure change accompanying swelling. The results revealed that a conformational change of PAA chains, induced by the pH change, can be explained by the presence of a structural domain in the gel network, where both PVA chains and PAA chains get entangled and partially form a interpenetrating polymer network(IPN).     

Preparation method and physical,mechanical, thermal characterization of poly(vinyl alcohol)/poly(acrylic acid) blends

A series of blends of poly(vinyl alcohol)/poly(acrylic acid) (PVA/PAA) were prepared by solution mixing and casting. Glycerol was used as plasticizer. The blends were characterized for their physicochemical and thermo-mechanical properties. The FTIR results revealed the molecular level interaction between PVA and PAA at all blend ratios. The incorporation of PAA significantly reduced the storage modulus of PVA at a given temperature. PVA gradually lost its crystalline character with the increase of PAA and became fully amorphous when the PAA content in the blend exceeded 50 wt%. The kinetic parameters of the semi-crystalline blends were determined using the Avarami–Erofeev model, which showed excellent fitting with the experimental data from DSC. The loss in crystallinity of PVA also contributed to an increase in swelling of the blend when the PAA content is increased. The morphology study by FE-SEM demonstrated that there is no phase separation among the blend components at all blend ratios.     

Thermal properties of poly(vinyl alcohol)/poly(diallyldi‐methylammonium chloride) interpenetrating polymer networks

Interpenetrating polymer networks (IPNs) constructed with poly(vinyl alcohol) (PVA) and poly(diallyldimethyl ammonium chloride) (PDADMAC) using a sequential IPN method were prepared. The thermal characterization of the IPNs was investigated by differential scanning calorimetry (DSC), dielectric analysis (DEA), and thermogravimtric analysis (TGA). Decreases in the melting temperature of PVA segments in IPNs were observed with increasing PDADMAC content using DSC. DEA was employed to ascertain glass transition temperature of IPNs. The thermal decomposition of IPNs was investigated using TGA, and thermal decomposition of IPNs could be decelerated by changing PVA content. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1346–1349, 2003     

Microwave-induced shape-memory poly(vinyl alcohol)/poly(acrylic acid) interpenetrating polymer networks chemically linked to SiC nanoparticles

Microwave (MW)-induced shape-memory poly(vinyl alcohol)/poly(acrylic acid) (PVA/PAA) interpenetrating polymer networks (SMP-IPNs) were prepared through in situ polymerization. Silicon carbide (SiC) nanoparticles were modified by 3-(methacryloyloxy) propyltrimethoxysilane (KH570). 3-(Methacryloyloxy) propyltrimethoxysilane was covalently bonded on the surface of SiC through the reaction of silanol and the methoxy groups. The polymerization of acrylic acid (AA) using N,N′-methylenebis (2-propenamide) (MBA) as cross-linker in PVA solution was initiated through the double bonds of KH-570 grafted on SiC, leading to a PAA polymer network cross-linked with MBA. The PVA molecular chains run through the PAA cross-linking network and form an IPN structure. Therefore, SiC as a strong MW absorbing material could be chemically cross-linked into polymer matrix. The effect of composition on the properties of SMP-IPN was studied using dynamic mechanical analysis, dielectric properties and shape memory effect (SME) test. The results showed that the introduction of SiC in IPNs not only provided samples with excellent MW-induced shape memory effect (SME), but also caused a higher equilibrium temperature under MW irradiation. Moreover, both SiC content and applied MW power affected the shape recovery properties of PVA/PAA interpenetrating composites. MW-induced SMPs offered great advantages such as fast recovery, high recovery rate, and remote actuation. This study provides the potential applications of the fast and environmentally friendly SMPs used as MW-responsive sensors, implantable devices, etc.     

Synthesis and characterization of semi‐interpenetrating networks based on poly(dimethylsiloxane) and poly(vinyl alcohol)

Semi‐interpenetrating networks (Semi‐IPNs) with different compositions were prepared from poly(dimethylsiloxane) (PDMS), tetraethylorthosilicate (TEOS), and poly(vinyl alcohol) (PVA) by the sol‐gel process in this study. The characterization of the PDMS/PVA semi‐IPN was carried out using Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and swelling measurements. The presence of PVA domains dispersed in the PDMS network disrupted the network and allowed PDMS to crystallize, as observed by the crystallization and melting peaks in the DSC analyses. Because of the presence of hydrophilic (? OH) and hydrophobic (Si? (CH₃)₂) domains, there was an appropriate hydrophylic/hydrophobic balance in the semi‐IPNs prepared, which led to a maximum equilibrium water content of ～ 14 wt % without a loss in the ability to swell less polar solvents. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Swelling behavior of semi‐interpenetrating polymer network hydrogels composed of poly(vinyl alcohol) and poly(acrylamide‐co‐sodium methacrylate)

Interpenetrating polymer network (IPN) hydrogels based on poly(vinyl alcohol) (PVA) and poly(acrylamide‐co‐sodium methacrylate) poly(AAm‐co‐SMA) were prepared by the semi IPN method. These IPN hydrogels were prepared by polymerizing aqueous solution of acrylamide and sodium methacrylate, using ammonium persulphate/N,N,N¹,N¹‐tetramethylethylenediamine (APS/TMEDA) initiating system and N,N¹‐methylene‐bisacrylamide (MBA) as a crosslinker in the presence of a host polymer, poly(vinyl alcohol). The influence of reaction conditions, such as the concentration of PVA, sodium methacrylate, crosslinker, initiator, and reaction temperature, on the swelling behavior of these IPNs was investigated in detail. The results showed that the IPN hydrogels exhibited different swelling behavior as the reaction conditions varied. To verify the structural difference in the IPN hydrogels, scanning electron microscopy (SEM) was used to identify the morphological changes in the IPN as the concentration of crosslinker varied. In addition to MBA, two other crosslinkers were also employed in the preparation of IPNs to illustrate the difference in their swelling phenomena. The swelling kinetics, equilibrium water content, and water transport mechanism of all the IPN hydrogels were investigated. IPN hydrogels being ionic in nature, the swelling behavior was significantly affected by environmental conditions, such as temperature, ionic strength, and pH of the swelling medium. Further, their swelling behavior was also examined in different physiological bio‐fluids. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 302–314, 2005     

A mucoadhesive polymer prepared by template polymerization of acrylic acid in the presence of poly(vinyl alcohol) for mucosal drug delivery

The interpolymer complexes composed of PVA and PAA were prepared by template polymerization of acrylic acid in the presence of PVA with different molecular weights and degrees of saponification. The carbonyl absorption band of the PAA in the PAA/PVA interpolymer complexes was shifted to a lower wavenumber due to H‐bonding between the carboxyl group of PAA and the hydroxyl group of PVA. The swelling ratio and the degree of dissolution of the PVA/PAA interpolymer complexes were dependent on the pH of the medium, the molecular weight, and the degree of saponification of the PVA. The release rate of a model drug, lidocaine, from the complexes decreased with increasing degree of saponification of the PVA due to the lower swelling degree of the complex. The adhesive force of the PVA/PAA interpolymer complexes with a plastic plate (poly propylene) was stronger than that of the commercial Carbopol 971P. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 327–331, 2004     

Bending of poly(vinyl alcohol)–poly(sodium acrylate) composite hydrogel in electric fields

Bending of poly(vinyl alcohol) hydrogel mixed with poly(sodium acrylate) chains, PVA–PAA gel, under the influence of dc electric fields was studied. The PVA–PAA gel was prepared by repeatedly freezing and thawing a mixture of PVA and polyacrylic acid aqueous solutions. The PVA–PAA gel was a hydrogel with the PAA chains, which were entangled with the PVA polymer network and were fixed in the gel. The PVA–PAA gel bent toward the negative electrode in electrolyte solutions under dc electric fields as did the polyelectrolyte gel with negatively charged polyions. The PVA gel, free of PAA, was insensitive to dc electric fields. The deflection of the bending and the bending speed were influenced by the filed intensity, the concentration of the polyion in the gel, and the thickness of the gel. The bending of the PVA–PAA gel was qualitatively explained by a bending theory of polyelectrolyte gel, based upon the change of the osmotic pressure due to the ion concentration difference between the inside and the outside of the gel.     

Thermal characteristics of interpenetrating polymer networks composed of poly(vinyl alcohol) and poly(N‐isopropylacrylamide)

Interpenetrating polymer networks (IPNs) composed of poly(vinyl alcohol) (PVA) and poly(N‐isopropylacrylamide) (PNIPAAm) were prepared by the sequential‐IPN method. The thermal characterization of the IPNs was investigated using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and dielectric analysis (DEA). Depression of the melting temperature (T_m) of the PVA segment in IPNs was observed with increasing PNIPAAm content using DSC. DEA was employed to ascertain the glass‐transition temperature (T_g) of IPNs. From the result of DEA, IPNs exhibited two T_g values, indicating the presence of phase separation in the IPNs. The thermal decomposition of IPNs was investigated using TGA and appeared at near 200°C. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 881–885, 2003     

Crosslinking reaction of poly(vinyl alcohol) with poly(acrylic acid) (PAA) by heat treatment: Effect of neutralization of PAA

The crosslinking reaction of poly(vinyl alcohol) (PVA) by esterification using poly(acrylic acid) (PAA) as a crosslinking reagent was investigated to obtain highly insoluble PVA materials. Blend films of PVA and PAA (PVA/PAA = 8/2) were prepared to examine the effect of degree of neutralization (DN) in PAA and heat‐treatment conditions on the degree of crosslinking reaction. The degree of crosslinking reaction varied significantly when the DN of PAA changed. The optimum DN for the crosslinking reaction was in the range of 5 to 10 mol %. In the case of unneutralized PAA, the degree of crosslinking reaction was at most 15 mol % by heat treatment for 20 min at 200°C. Applying partially neutralized PAA (DN = 10 mol %) raised the degree to about 40 mol % under the same heat‐treatment conditions. FTIR analysis revealed that the hydroxyl group of PVA in the film blended with unneutralized PAA was degraded to a greater degree than that with partially neutralized PAA as a result of heat treatment. It was found that heat treatment at a low pH condition enhances the degradation of the hydroxyl group of PVA, resulting in a decrease of the number of crosslinking sites by esterification. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2420–2427, 2003     

Temperature induced phase transition of interpenetrating polymer networks composed of poly(vinyl alcohol) and copolymers of N-isopropylacrylamide with acrylamide or 2-acrylamido-2-methylpropyl-sulfonic acid

Interpenetrating polymer networks (IPNs) composed of poly(vinyl alcohol) (PVA) and poly(N-isopropylacrylamide-co-X) (PNIPAAm-co-X) were prepared by using a two-step method. Hydrophilicity of PNIPAAm chains was increased by adding acrylamide (AAm; hydrophilic neutral monomer) or 2-acrylamido-2-methylpropylsulfonic acid (AMPS; anionic charged monomer). The effect of the incorporation of chemically crosslinked PVA into the temperature induced phase transition as well as swelling behavior of the responsive hydrogels were studied. The volume phase transition (VPT) of IPNs was investigated by cloud point measurement and differential scanning calorimetry. Significant differences in volume phase transition enthalpies of PNIPAAm (ΔH_VPT) and volume phase transition temperatures (T_VPT) were found. The ΔH_VPT decreases with increasing co-monomer concentration. In several cases the phase transition was not followed by macroscopic shrinking of IPNs. Thus this property is advantageous for several technical applications.     

Thermal characteristics of poly(vinyl alcohol) and poly(vinylpyrrolidone) IPNs

Interpenetrating polymer network (IPN) hydrogels based on poly(vinyl alcohol) (PVA) and 1‐vinyl‐2‐pyrrolidone (VP) were prepared by radical polymerization using 2,2‐dimethyl‐2‐phenylacetophenone (DMPAP) and methylene bisacrylicamide (MBAAm) as initiator and crosslinker, respectively. The thermal characterization of the IPNs was investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and dielectric analysis (DEA). Depressions of the melting temperatures of PVA segments in IPNs were observed with increasing VP content via the DSC. The DEA was employed to ascertain the glass transition temperature (T_g) of IPNs. From the result of DEA, IPNs exhibited two T_gs indicating the presence of phase separation in the IPN. The thermal decomposition of IPNs was investigated using TGA and appeared at near 270°C. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1844–1847, 2002     

Enhanced oxygen‐barrier and water‐resistance properties of poly(vinyl alcohol) blended with poly(acrylic acid) for packaging applications

To enhance the oxygen‐barrier and water‐resistance properties of poly(vinyl alcohol) (PVA) and expand its food packaging applicability, five crosslinked poly(vinyl alcohol)/poly(acrylic acid) (PVA/PAA) blend films were prepared via esterification reactions between hydroxyl groups in PVA and carboxylic acid groups in PAA. The physical characteristics of the blends, including the thermal, barrier, mechanical and optical properties, were investigated as a function of PAA ratio. With increasing PAA content, the crosslinking density was significantly increased, resulting in changes in the chemical structure, morphology and crystallinity of the films. The oxygen transmission rate of pure PVA decreased from 5.91 to 1.59 cc m^?1 day^?1 with increasing PAA ratio. The water resistance, too, increased remarkably. All the blend films showed good optical transparency. The physical properties of the blend films were strongly correlated with the chemical structure and morphology changes, which varied with the PAA content. © 2016 Society of Chemical Industry     

Drug release behavior of electrical responsive poly(vinyl alcohol)/poly(acrylic acid) IPN hydrogels under an electric stimulus

The electrically modulated properties of interpenetrating polymer networks (IPN) composed of poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAAc) under electric field were investigated for drug delivery systems. PVA/PAAc IPNs with various compositions were synthesized by a sequential method, that is, ultraviolet polymerization of AAc in the mixture of PVA and aqueous AAc monomer solution, followed by a freeze‐thawing process to prepare elastic hydrogels. The amount of loaded drug significantly increased with the content of PAAc containing ionizable groups in IPN. The amount of introduced ionic drug (cefazoline) was greater than that of the nonionic drug (theophylline). Release behaviors of drug molecules from negatively charged PVA/PAAc IPN were switched on and off in a pulsatile pattern depending on the applied electric stimulus. The released amount and the release rate of drug were influenced significantly by the applied voltage, ionic group contents in IPN, ionic properties of drug solute, and the ionic strength of release medium. In addition, the ionic properties of drug molecules dramatically affected release behaviors, thus the release of ionic drug was much more enhanced than that of the nonionic drug. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1752–1761, 1999     

Properties of electroresponsive poly(vinyl alcohol)/poly(acrylic acid) IPN hydrogels under an electric stimulus

Interpenetrating polymer networks (IPNs) composed of poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAAc) exhibited electrical-sensitive behavior. PAAc as an initial network was prepared inside a PVA solution using UV irradiation; then, PVA networks as a secondary network were formed by a repetitive freeze–thawing process. Their mechanical properties were influenced by the swelling ratio, crosslinking by UV radiation and a freeze–thawing process, and intermolecular force by hydrogen bonding. When a swollen PVA/PAAc IPN was placed between a pair of electrodes, the IPN exhibited bending behavior upon the applied electric field. The equilibrium bending angle (EBA) and the bending speed of the PVA/PAAc IPN increased with the applied voltage and the content of the PAAc network having negatively charged ionic groups within the IPN. The electroresponsive behavior of the present IPN was also affected by the electrolyte concentration of the external solution. Particularly, IPN37 showed a maximum EBA when the critical ionic strength was 0.1. Anisotropic deswelling of the IPN was observed in a direct contact with a pair of electrodes under aerobic conditions. The PVA/PAAc IPN also showed stepwise bending behavior depending on the electric stimulus. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 1675–1683, 1999     

Blood protein adsorption onto macroporous semi‐interpenetrating polymer networks (IPNs) of poly(ethylene glycol) (PEG) and poly(2‐hydroxyethyl methacrylate) (PHEMA) and assessment of in vitro blood compatibility

This work reports a study of the adsorption of fibrinogen (Fgn) onto the surface of semi‐interpenetrating polymer networks (IPNs) of poly(ethylene glycol) (PEG) and poly(2‐hydroxyethyl methacrylate) (PHEMA). The semi‐IPNs were prepared by polymerizing 2‐hydroxyethyl methacrylate with a redox system and in the presence of PEG and crosslinker ethyleneglycol dimethacrylate. The proposed spongy IPNs were characterized by Fourier transform infrared and environmental scanning electron microscopy methods, and network structural parameters, such as molecular weight between crosslinks and crosslink density, were calculated using swelling measurements. The adsorption of Fgn was carried out onto the spongy IPNs and kinetic constants of the adsorption process as well as isotherm constants were evaluated. The adsorption process was also studied under varying pH, ionic strengths, and chemical architecture of the IPNs. The anti‐thrombogenic behaviour of the polymer matrices was judged using in vitro tests. Copyright © 2006 Society of Chemical Industry