Thermal decomposition of cellulose/synthetic polymer blends containing grafted products. V. Cellulose/polystyrene blends

Homogeneous grafting of styrene onto cellulose was carried out in a dimethylacetamide/lithium chloride solvent system. The grafted products were added to cellulose/polystyrene (PS) blends as compatibilizers. The thermal decomposition behavior of the blends was investigated by thermogravimetry. The thermal stability of the blends decreased with an increase in grafted product content. The crystallinity of the blends decreased with grafted product content. The microphase‐separated structures of the blends became finer with grafted product content. The glass transition temperatures for cellulose and PS in the blends were lowered with grafted product content. Differences in thermal decomposition behavior of the blends were correlated with compatibility. Thermogravimetry was effective for compatibility estimation in cellulose/PS blends containing grafted products. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Partial miscibility of cellulose–polyacrylonitrile blends

Cellulose-polyacrylonitrile (PAN) blends have been prepared by the regeneration of 2% concentration solutions in dimethylformamide–NO₂ solvent. The blends are transparent when containing between 0 and 50% by weight of PAN. Dynamic mechanical measurements indicate a shift in glass transition temperature T_g of PAN for the blends, suggesting partial miscibility between cellulose and PAN. Experimental density values larger than those predicted theoretically are also in agreement with this conclusion.     

Compatibility and nonlinear viscoelasticity of polychloroprene/polyvinyl chloride blends with nitrile butadiene rubber as a compatibilizer

Miscible polychloroprene/polyvinyl chloride (CR/PVC) blends with nitrile butadiene rubber (NBR) as a compatibilizer were prepared. The effect of NBR on the compatibility between CR and PVC was mainly analyzed by studying the thermal behavior and the phase structure of CR/PVC blends. An obvious decrement in the T_g of PVC phase successfully provided an explanation for the compatibilization of NBR. Due to the improved compatibility between CR and PVC, the size of PVC particles in CR/PVC blends decreased a lot according to the scanning electronic microscopic images. The significant improvement of mechanical properties of CR/PVC blends was in good agreement with the better compatibility between CR and PVC phases. The softening effect of NBR on the nonlinear viscoelasticity of CR/PVC blends was also studied by RPA 2000. Temperature sweep test by RPA 2000, a less reported characterization method of T_g, was successfully applied to measure T_g of CR/PVC blends and study the compatibilization of NBR. The reason for better thermal stability and the thermal decomposition mechanism of CR/PVC blends were analyzed according to the results of TGA. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42448.     

Thermal stability and compatibility of epoxy/polycarbonate and epoxy/tetramethyl polycarbonate blends

A series of the blends of tetrafunctional epoxy resins with polycarbonate (PC) or tetramethyl polycarbonate (TMPC) was prepared to investigate thermal stability and compatibility. The T_g behavior as a function of isothermal curing time was observed. The thermal stability of epoxy and epoxy/thermoplastics blends was estimated using thermogravimetric analysis (TGA). Fourier transform infrared (FTIR) investigation demonstrated the occurrence of thermal degradation and hydrolysis in epoxy and epoxy/PC blends during the curing process. The thermal degradation of cured epoxy was induced with etherification, a sort of side reaction, and resulted in the chain scission of networks leading to the decrease of T_g. The variance of thermal stability with a combination of two components in these blends resulted from the difference of the compatibility due to chemical structure similarity. The compatibility was corroborated with the morphology by scanning electron microscopy (SEM). © 1996 John Wiley & Sons, Inc.     

Preparation and characterization of biodegradable polymer blends from poly(3‐hydroxybutyrate)/poly(vinyl acetate)‐modified corn starch

Biodegradable polymer blends prepared by blending poly(3‐hydroxybutyrate) (PHB) and corn starch do not form intact films due to their incompatibility and brittle behavior. For improving their compatibility and flexibility, poly(vinyl acetate) (PVAc) was grafted from the corn starch to prepare the PVAc‐modified corn starch (CSV). The resulting CSV consisted of 47.2 wt% starch‐g‐PVAc copolymer and 52.8 wt% PVAc homopolymer and its structure was verified by FT‐IR analysis. In comparison with 35°C of the neat PVAc, the glass transition temperature (T_g) of the grafted PVAc chains on starch‐g‐PVAc was higher at 44°C because of the hindered molecular mobility imposed from starch on the grafted PVAc. After blending PHB with the CSV, structure and thermal properties of the blends were investigated. Only a single T_g was found for all the PHB/CSV blends and increased with increasing the CSV content. The T_g‐composition dependence of the PHB/CSV blends was well‐fitted with the Gordon‐Taylor equation, indicating that the CSV was compatible with the PHB. In addition, the presence of the CSV could raise the thermal stability of the PHB component. It was also found that the presence of the PHB and PVAc components would not hinder the enzymatic degradation of the corn starch by α‐amylase. POLYM. ENG. SCI., 55:1321–1329, 2015. © 2015 Society of Plastics Engineers     

Miscibility of poly(vinyl alcohol)/polyacrylamide blends before and after gamma irradiation

Films of polymer blends having various contents of poly(vinyl alcohol) (PVA) and polyacrylamide (PAM) were prepared by the solution casting technique using water as a common solvent. The thermal, mechanical and morphological properties of these blends before and after exposure to various doses of gamma radiation, up to 100 kGy, have been investigated. The visual observation and reflectance measurements show that PVA/PAM blends are miscible over a wide range of composition. Moreover, the differential scanning calorimetry (DSC) thermograms show only a single glass transition temperature (T_g), but not those of PVA or PAM homopolymers, giving further support to the complete compatibility of such blends. The T_g of PVA/PAM blends decreases with increasing content of PAM but increases after exposure to gamma irradiation, indicating the occurrence of crosslinking. These findings were demonstrated by the scanning electron micrographs of the fracture surfaces and the tensile mechanical properties. The TGA thermograms and percentage mass loss at different decomposition temperatures show that unirradiated PVA homopolymer possesses higher thermal stability than PAM homopolymer and their blends within the heating temperature range investigated, up to 250 °C. An opposite trend is observed within the temperature range 300–500 °C. In general, the thermal stability of homopolymers or their blends improves slighly after exposure to an irradiation dose of 100 kGy. These findings are clearly confirmed by the calculated activation energies of the thermal decomposition reaction of the homopolymers and the blends. © 2003 Society of Chemical Industry     

Compatibility study of chlorinated polyethylene/ethylene methacrylate copolymer blends using thermal,mechanical, and chemical analysis

Blends of chlorinated polyethylene (CPE) elastomer and ethylene methacrylate copolymer (EMA) in various compositions were studied for their compatibility using differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and Fourier transform infrared (FTIR) spectroscopy techniques. Irrespective of measurement techniques used, all blends showed a single glass transition temperature (T_g) lying in between the T_g of control polymers in both DSC and DMA. Glass transition temperatures of blends obtained from DSC were in consistency with Couchman–Karasz equation. Also, the T_g obtained from both DSC and DMA are above the “rule of mixing” line of the two control polymers. These results from thermal analysis clearly indicate some compatibility between the two polymers. Furthermore, compatibility of CPE/EMA blends were also been investigated by FTIR spectroscopy and scanning electron microscopic analysis. A shifting of characteristic C? Cl stretching peak of CPE and C?O stretching peak of EMA toward lower wave number indicate the presence of specific interaction between the two polymers. Mechanical properties like tensile strength, modulus at 100% elongation, elongation at break, and hardness were observed above the line of additivity drawn between the two control polymers, which corroborate compatibility between CPE and EMA. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40316.     

Preparation and thermal properties of bismaleimide blends based on hydroxyphenyl maleimide

N‐(4‐hydroxyphenyl)maleimide was melt‐blended with the glycidyl ether of bisphenol‐A and various mole percentages of 4, 4′‐(diaminodiphenylsulfone) bismaleimide. The cure behaviour of the resins was evaluated by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA). The blends showed distinct reductions in the onset of cure (T_o) and peak exothermic (T_exo) temperatures. The blends cured at low temperatures exhibited glass transition temperatures (T_gs) higher than the cure temperatures. The cured blends showed high moduli, glass transition temperatures in excess of 250 °C and good thermal stabilities up to 400 °C. Copyright © 2005 Society of Chemical Industry     

Polypropylene/polypropylene‐grafted acrylic acid copolymer/ethylene–Acrylic acid copolymer ternary blends for hydrophilic polypropylene

Ternary blends of polypropylene (PP), a polypropylene‐grafted acrylic acid copolymer (PP‐g‐AA), and an ethylene–acrylic acid copolymer (EAA) were prepared by melt blending. The surfaces of films with different contents of these three components were characterized with contact‐angle measurements. Scanning electron microscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis were used to characterize the microstructure, melting and crystalline behavior, and thermal stability of the blends. The contact angles of the PP/PP‐g‐AA blends decreased monotonically with increasing PP‐g‐AA content. With the incorporation of EAA, the contact angles of the PP/PP‐g‐AA/EAA ternary blends decreased with increasing EAA content. When the concentration of EAA was higher than 15 wt %, the contact angles of the ternary blends began to increase. Scanning electron microscopy observations confirmed that PP‐g‐AA acted as a compatibilizer and improved the compatibility between PP and EAA in the ternary blends. Differential scanning calorimetry analysis suggested that acrylic acid moieties could act as nucleating agents for PP in the polymer blends. Thermogravimetric analysis and differential thermogravimetry confirmed the optimal blend ratio for the PP/PP‐g‐AA/EAA ternary blends was 70/15/15. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 436–442, 2006     

Preparation and properties of foamed cellulose acetate/polylactic acid blends

In order to improve the foaming performance of pure cellulose acetate (CA), blends were prepared by mixing polylactic acid (PLA) in CA and foamed by supercritical CO₂ (ScCO₂) in this study. The effect of PLA content (percentage by mass of blend) on structure, thermal properties, rheological properties, foaming properties and mechanical properties of the blends was investigated. The results showed that the addition of PLA destroyed the original hydrogen bonds of CA, while the blends had good crystallization properties. At the same time, compared with pure CA, the glass transition temperature (T_g) of the blends decreased, and the initial decomposition temperature (T₀) was reduced from 349.41°C (pure CA) to 334.68°C (CA/20%PLA). In addition, the rheological properties of the blends were improved, and the viscosity was reduced, which was obviously beneficial to foaming process. The pore size and density of the foamed blends both reached the maximum value at 20%PLA. The presence of PLA could degrade the mechanical properties of the blends. However, the overall drop (1.01 KJ/m²) of impact strength of the blends after foaming is much smaller than that before foaming (12.11 KJ/m²), indicating that the improvement of foaming performance was beneficial to improve its impact strength.     

Thermal decomposition behavior of miscible cellulose/synthetic polymer blends

The thermal decomposition behavior of the miscible cellulosic blends cellulose(Cell)/poly(N-vinyl-2-pyrrolidone) (PVP), Cell/poly(ethylene glycol) (PEG), and Cell/poly(vinyl alcohol) (PVA) was investigated by thermogravimetry. The thermal stability of Cell in the Cell/PVP blends decreased but that of Cell in the Cell/PEG and Cell/PVA blends was hardly influenced. The thermal stability of synthetic polymers in the blends was little affected. The difference in thermal decomposition behavior was correlated to the difference in miscibility. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 2133–2137, 1998     

Morphology and thermal properties of two polymethacrylates modified by a polymer liquid crystal

We have studied blends of a polymer liquid crystal (PLC) with poly(cyclohexylethyl methacrylate) (PCHEMA) or poly(cyclohexylpropyl methacrylate) (PCHPMA). The PLC is PET/0.6PHB where PET = poly(ethylene terephthalate), PHB = p-hydroxybenzoic acid and 0.6 is the mole fraction of the latter in the copolymer. The microstructure was studied by scanning electron microscopy (SEM). PCHEMA + PLC (20 wt% of the latter, blend E) has a fine texture with LC islands evenly distributed in the matrix and good adhesion between the phases resulting from their partial miscibility. The PCHPMA + PLC (20 wt% of the latter, blend P) shows only limited compatibility. The SEM results are confirmed by values of the glass transition temperatures T_g determined via thermal mechanical analysis. The T_g value of the blend E is shifted towards the T_g of PLC; T_g of blend P is practically equal to that of PCHPMA. The linear isobaric expansivity α_L values for both blends are lower than the respective values for pure PCHPMA and PCHEMA. Thermal stabilities of the blends determined by thermogravimetry are also better than those of pure polymethacrylates. The temperature of 50% weight degradation for blend E is higher than that for pure PCHEMA by more than 60 K Copyright © 2004 Society of Chemical Industry     

Thermal behavior,morphology, and some melt properties of blends of polycarbonate with poly(styrene-co-acrylonitrile) and poly(acrylonitrile-butadiene-styrene)

Blends of bisphenol-A polycarbonate (PC) with poly- (styrene-co-acrylonitrile) (SAN) and poly (acrylonitrile-butadiene-styrene) (ABS) prepared by screw extrusion and solution-casting were investigated by differential scanning calorimetry and scanning electron microscopy. From the measured glass-transition temperatures (T_g) and specific heat increments (ΔC_p) at the T_g, SAN appears to dissolve more in the PC-rich phase than does PC in the SAN-rich phase. Also, the decrease of T_g (PC) in PC/ABS blends is larger than in the PC/SAN blends. From the T_g behavior and the electron microscopy study, it is suggested that the compatibility increases more in the SAN-rich compositions than in the PC-rich compositions of the blends. In the study of extrudate swell of the PC/SAN blends and the PC/ABS blends, the maximum level of extrudate swell is reached at 0.5 weight fraction of PC for both blend systems. The Flory-Huggins polymer-polymer interaction parameter (χ12) between PC and SAN was calculated and found to be 0.034 ± 0.004. A similar value of χ for PC and SAN was found with the PC/ABS blends.     

The glass transition temperature of nitrated polystyrene/poly(acrylic acid) blends

Low-molecular-weight polystyrene was nitrated to different levels. The nitrated polystyrene was blended with different molecular weights of poly(acrylic acid), PAA. The glass transition temperatures (T_g) for the mixtures were investigated by differential scanning calorimetry. A single T_g was observed for all blends, indicating single-phase blends. In general, it was found that the T_g increases with molecular weight of PAA. The T_g values of the blends showed a positive deviation from the linear average T_g as a result of strong hydrogen bonding between the segments of the component polymers. The observed T_g values were not adequately represented by simple predictive equations or by single-parameter fitting equations. However, two-parameter fitting equations gave a reasonable representation of the data.     

Melt blends of SAN with SAN-graft-polybutadiene (PB)

Melt blends of SAN with SAN-graft-polybutadiene (PB) (g-ABS) were prepared in a Brabender plasticorder. The effect of g-ABS on the morphology and mechanical and viscoelastic properties of the blends was studied up to 60 wt % g-ABS. The brittle-tough (BT) transition occurred around 20 wt % g-ABS, and the viscosity increased monotonically with g-ABS, showing yield behavior at ≥ 20%. The lower and higher glass transition temperatures (T_g) of g-ABS, each corresponding to the T_g of PB and grafted SAN, decreased and increased with the addition of free SAN, and this was interpreted in terms of graft SAN—PB phase separation. © 1993 John Wiley & Sons, Inc.     

Thermal,mechanical, and surface characterization of starch–poly(vinyl alcohol) blends and borax‐crosslinked films

Starch–poly(vinyl alcohol) (PVA) blends with different compositions were prepared and crosslinked with borax by in situ and posttreatment methods. Various amounts of glycerol and poly(ethylene glycol) with a molecular weight of 400 were added to the formulations as plasticizers. The pure starch–PVA blends and the crosslinked blends were subjected to differential scanning calorimetry, thermogravimetry, and X‐ray photoelectron spectroscopic studies. Broido and Coats–Redfern equations were used to calculate the thermal decomposition kinetic parameters. The tensile strengths and elongation percentages of the films were also evaluated. The results suggested that the glass‐transition temperature (T_g) and the melting temperature strongly depended on the plasticizer concentration. The enthalpy relaxation phenomenon was dependent on the starch content in the pure blend. The crosslinked films showed higher stability and lower T_g's than pure PVA and starch–PVA blends, respectively. High‐resolution X‐ray photoelectron spectroscopy provided a method of differentiating the presence of various carbons associated with different environments in the films. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1313–1322, 2005     

Effect of confinement on glass dynamics and free volume in immiscible polystyrene/high‐density polyethylene blends

The effect of confinement on glass dynamics combined with the corresponding free volume changes of amorphous polystyrene (PS) in blends with semi‐crystalline high‐density polyethylene (HDPE) have been investigated using thermal analyses and positron annihilation lifetime spectroscopy (PALS). Two different glass transition temperatures (T_g) were observed in a PS/HDPE blend due to the dissimilarity in the chemical structure, consistent with an immiscible blend. However, T_g of PS in the incompatible PS/HDPE blend showed an upward trend with increasing PS content resulting from the confinement effect, while T_g of the semi‐crystalline HDPE component became lower than that of neat HDPE. Moreover, the elevation of T_g of PS was enhanced with a decrease of free volume radius by comparing annealed and unannealed PS/HDPE blends. Positron results showed that the free volume radius clearly decreased with annealing for all compositions, although the free volume hole size agreed well with linear additivity, indicating that there was only a weak interaction between the two components. Combining PALS with thermal analysis results, the confinement effect on the glass dynamics and free volume of PS phase in PS/HDPE blends could be attributed to the shrinkage of HDPE during crystallization when HDPE acted as the continuous phase. © 2015 Society of Chemical Industry     

Structure–property behavior of gamma‐irradiated poly(styrene) and poly(methyl methacrylate) miscible blends

Polymer blends based on various ratios of polystyrene (PS) and polymethyl methacrylate (PMMA) were exposed to different doses of gamma radiation up to 25 Mrad. The structure–property behavior of the polymer blends before and after they had been irradiated was investigated by DSC, TGA, and FTIR spectroscopy. The DSC scans of the glass transition temperature (T_g) of the different polymer blends showed that the T_g was greatly decreased by increasing the ratio of the PMMA component in the polymer blends. Moreover, the T_g of PS/PMMA blends was found to decrease with increasing irradiation dose. The depression in T_g was noticeable in the case of blends rich in PMMA component. The TGA thermograms showed that the thermal stability of the unirradiated polymer blends decreases with increasing the ratios of PMMA component. Also, it was found that the presence of PS polymer in the blends affords protection against gamma radiation degradation and improves their thermal stability. However, exposing the polymer blends to high doses of gamma radiation caused oxidative degradation to PMMA components and decreased the thermal stability. The investigation of the kinetic parameters of the thermal decomposition reaction confirm the results of thermal stability. The FTIR analysis of the gamma‐irradiated polymer blend films gives further support to the TGA data. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 509–520, 1999     

The influence of filler treatment on the properties of TPU/PP blends: I. Thermal properties and stability

Commercially available organosilane (3‐glycidoxypropyltrimethoxysilane (GPTMS)) coupling agent was used to treat talc in order to improve the affinity relative between the filler and the polymer in composites as well as filler and polymer in the thermoplastic polyurethane/polypropylene (TPU/PP) blends (talc content was 5 wt%). The talc particles were first modified with GPTMS and then introduced into TPU, PP as well as TPU/PP blends with different weight ratios of polymers using blending method and subsequently injection molded in a hydraulic press. The aim was to report the effect of silane coupling agent on the thermal and morphological properties of talc filled composites and blends. The results showed that the thermal properties of the TPU, PP composites and TPU/PP blends were improved with the addition of silane treated talc (higher melting (T_m), crystallization (T_c) temperatures and degree of crystallinity (χ_c)). The glass transition temperature (T_g) obtained by dynamic mechanical analysis (DMA) of the TPU soft segments in TPU/PP blends increased with the addition of untreated and silane treated talc due to lower mobility of the soft segments in TPU and better miscibility of TPU and PP. TPU/PP blends with the silane treated talc show better thermal stability than the TPU/PP blends with untreated talc. POLYM. ENG. SCI., 55:1920–1930, 2015. © 2014 Society of Plastics Engineers     

Polycarbonate/polyalkylene terephthalate blends: Interphase interactions and impact strength

Blends of polycarbonate (PC) and poly(alkylene terephthalate) (PAT) such as poly(butylene terephthalate) (PBT) and poly(ethylene terephthalate) (PET) were investigated. It was learned that processes of phase separation in blends consisting of PC and PAT can cause variations in properties of both the amorphous and crystalline phases. In PC/PBT blends the DSC technique did not detect crystalline portion of PBT with its concentrations up to 20 wt %. For PBT = 40 wt %, it forms a continuous phase, and blend's crystallinity is close to the additive values. The glass transition temperature (T_g) shifts to the lower temperature region. The relaxation spectrometry revealed strong adhesion between phases in the blends over the temperature range from the completion of β‐transition to T_gPAT. This interaction becomes weaker between T_gPAT and T_gPC. Temperature‐dependent variations in the molecular mobility and interphases interactions in the blends affect their impact strength. Over the temperature range where interphases interactions occur and the two components are in the glassy state, the blend is not impact resistant. Over the temperature range between T_gPAT and T_gPC the blends become impact‐resistant materials. This is because energy of crack propagation in the PAT amorphous phase—being in a high‐elastic state—dissipates. It is postulated that the effect of improving the impact strength of PC/PAT blends, which was found for temperatures between the glass transition temperatures of the mixed components, is also valid for other binary blends. © 2002 Wiley Perioodicals, Inc. J Appl Polym Sci 84: 1277–1285, 2002; DOI 10.1002/app.10472