Polystyrene-poly(2-ethylhexylmethacrylate) block copolymers: Synthesis,bulk phase behavior,and thin film structure

Anionic polymerization was employed to synthesize well-defined diblock copolymers of polystyrene and poly(2-ethylhexylmethacrylate), PS-PEHMA. Diblock morphologies in bulk and in substrate-supported thin films were characterized by small-angle X-ray scattering (SAXS) and atomic force microscopy (AFM), respectively. PS-PEHMA diblocks exhibited thermotropic order-disorder transitions; one diblock showed a thermoreversible transition between lamellae and a higher-temperature morphology assigned as perforated lamellae. Unlike PS-poly(alkylmethacrylate) diblocks where the alkyl group is n-butyl or n-pentyl, PS-PEHMA diblocks showed a typical decreasing Flory interaction parameter with increasing temperature. Thin films of PS-cylinder-forming PS-PEHMA diblocks showed a strong preference for the cylinders to lie in the plane of the film; films of incommensurate thickness readily formed terraces. Films of commensurate thickness were easily aligned over macroscopic areas through the application of mechanical shear.     

A new strategy for the one-step synthesis of block copolymers through simultaneous free radical and ring opening polymerizations using a dual-functional initiator

Block copolymers are fascinating and complex materials that have been used in a range of diverse scientific and technological capacities. We demonstrate that a single one-step approach based on dual simultaneous polymerizations is a viable technique for the synthesis of a wide range of block copolymers by combining two dissimilar polymerization systems and using a dual-functional initiator. The main advantage of this methodology is that a simple, one-step, and simultaneous polymerization occurs in the bulk, which makes this process very attractive from both industrial and academic points of view. We plan to study the reaction kinetics and evaluate how well the ring opening catalyst [in this case, Sn(oct)₂] works under reverse ATRP conditions.     

Living random and block copolymerization of ethene and propene on a tailor-made phenoxyimine catalyst and characterization of the resulting high molecular weight PE-block-P(E-co-P) block copolymers

The phenoxyimine catalyst (bis-(N-(3′,5′-diiodo-salicylidene)-2,6-difluoroaniline)-titanium(IV)-dichloride) was tailored to enable random and block copolymerisation of propylene and ethylene with compositions covering the entire feasible composition range. Well-defined high molecular weight diblock copolymers of the type PE-block-P(E-co-P), consisting of a semi-crystalline polyethylene and a soft P(E-co-P) block, were prepared and evaluated with respect to propylene content and the block lengths. The characterisation by means of AFM, CRYSTAF data and high temperature chromatographic elution provided the experimental evidence that no homo-polyethylene and less than 5% of the random copolymer are formed as by-products.     

Precise synthesis of polymers containing functional end groups by living ring-opening metathesis polymerization (ROMP): Efficient tools for synthesis of block/graft copolymers

This article summarizes recent examples for precise synthesis of (co)polymers containing functional end groups prepared by living ring-opening metathesis polymerization (ROMP) using molybdenum, ruthenium complex catalysts. In particular, this article reviews recent examples for synthesis of amphiphilic block/graft copolymers by adopting transition metal-catalyzed living ROMP technique. Unique characteristics of the living ROMP initiated by the molybdenum alkylidene complexes (so-called Schrock type catalyst), which accomplish precise control of the block segment (hydrophilic and hydrophobic) as well as exclusive introduction of functionalities at the polymer chain end, enable us to provide the synthesis of block copolymers varying different backbones by adopting the “grafting to” or the “grafting from” approach as well as “soluble” star shape polymers with controlled manner. The “grafting through” approach (polymerization of macromonomers) by the repetitive ROMP technique offers precise control of the amphiphilic block segments.     

Facile synthesis of diphenylethylene end-functional polyisobutylene and its applications for the synthesis of block copolymers containing poly(methacrylate)s

The convenient synthesis of methoxy-free 1,1-diphenylethylene end-functionalized polyisobutylene (PIB-DPE) has been accomplished by capping living PIB with 1,4-bis(1-phenylethenyl)benzene, followed by hydride transfer reaction with tributylsilane. The proposed method eliminates the need for methylation of the capped living PIB in which large excess of dimethylzinc must be used, resulting in a large amount of inorganic salt contamination. The obtained PIB-DPE was quantitatively lithiated with 1.5-fold excess n-butyllithium in tetrahydrofuran (THF) at room temperature. The methine proton at the chain end remained intact during the lithiation procedure. The resulting macroanion efficiently initiated the polymerization of alkyl methacrylates. Poly(methyl methacrylate) (PMMA)-b-PIB-b-PMMA, poly(2-hydroxyethyl methacrylate) (PHEMA)-b-PIB-b-PHEMA and poly(tert-butyl methacrylate) (P^tBMA)-b-PIB-b-P^tBMA have been prepared with high blocking efficiency by the proposed methodology. Complete hydrolysis of P^tBMA-b-PIB-b-P^tBMA into poly(methacrylic acid) (PMAA)-b-PIB-b-PMAA was realized in THF/1,4-dioxane, as confirmed by FTIR, ¹H NMR, and DSC analyses.     

Disparate polymerization facilitates the synthesis of versatile block copolymers from poly(trimethylene carbonate)

A disparate polymerization technique is utilized for preparing versatile block copolymers from poly(trimethylene carbonate) (poly(TMC)). In this study, 4-(chloromethyl)benzyl alcohol (CBA) is used for the disparate polymerization. The hydroxyl group of CBA is involved in ring-opening polymerization and the benzyl chloride group is involved in incorporating dithiocarbamate for pseudo-living radical polymerization. First, TMC is polymerized from the hydroxyl group of CBA by using an organocatalyst. The benzyl chloride group in CBA is modified using a dithiocarbamate, and then vinyl and methacrylate monomers are polymerized by photo-driven pseudo-living radical polymerization. The resulting block copolymers are versatile and the molecular weight distribution is reasonably narrow. In the present study, N-isopropylacrylamide, acrylamide glycolic acid, and 2-hydroxyethyl methacrylate are used for the disparate polymerization. The resulting block copolymers could be well dissolved in water by incorporation of hydrophilic segment into hydrophobic poly(TMC). The solution property is characterized in terms of hydrophobic domain formation and phase transition under ambient conditions. Moreover, enzymatic degradation is evaluated by using a copolymer-coated substrate. The block copolymer synthesis technique is considerably versatile, and the resulting polymer function can be freely designed. The disparate polymerization technique is a promising approach that provides universal materials for integrating biodegradable polyesters and functional polymers.     

Synthesis,characterization, and glass transition temperature of poly(styrene-b-butyl methacrylate) block copolymers by stable free radical polymerization

The synthesis of controlled polystyrenes with different molecular weights has been performed in the presence of 1-phenyl-1-(2,2,6,6-tetramethyl-1-piperidinyloxy)ethane (PETEMPO). The polystyrenes have served as macroinitiators for the formation of poly(styrene-b-butyl methacrylate) block copolymers. Using differential scanning calorimetry (DSC) it has been shown that all block copolymers synthesized do not present phase segregation. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 14–21, 2001     

Synthesis, thermal properties, and specific interactions of high Tg increase in poly(2,6-dimethyl-1,4-phenylene oxide)-block-polystyrene copolymers

We have synthesized a series of block copolymers of poly(2,6-dimethyl-1,4-phenylene oxide) and polystyrene (PPO-b-PS copolymer) by atom transfer radical polymerization. The PS content in these copolymer systems was determined by using infrared spectroscopy, thermal gravimetric analysis, and solution and solid-state NMR spectroscopy; good correlations exist between these characterization methods. DSC analyses indicated that the PPO-b-PS copolymers have higher glass transition temperatures than do their corresponding PPO/PS blends. Our FTIR and solid-state NMR spectroscopic analyses suggest that the PPO-b-PS copolymers possess stronger specific interactions that are responsible for the observed relatively higher values of T_g. We found one single dynamic relaxation from the dynamic mechanical analysis, which implies dynamic homogeneity exists in the PPO-b-PS copolymer; this result is consistent with the one single proton spin-lattice relaxation time observed in the rotating frame [T_1ρ(H)] during solid state NMR spectroscopic analysis. In addition, the 2D FTIR spectroscopy reveals evidence for the stronger interactions between segments of PPO and PS through the formation of π-cation complexes.     

Poly[styrene-b-maleated (ethylene/butylene)-b-styrene] (mSEBS) block copolymers and mSEBS/inorganic nanocomposites: I. Morphology and FTIR characterization

Self-assembled, [block copolymer]/[pure silicate and ORMOSIL] nanocomposites were created via sol-gel processes for silicate and organically-modified silicate (ORMOSIL) monomers in the presence of sulfonated maleated poly(styrene-b-ethylene/butylene-b-styrene) (mSEBS). Microscopic and small angle X-ray scattering (SAXS) studies showed that unmodified mSEBS has hexagonal packed PS cylinder morphology, but sulfonation causes the morphologies to be frustrated. The morphology of pure silicate nanoparticle-containing nanocomposites is phase separated, although further frustrated. The morphologies of the ORMOSIL-modified materials were different, less-ordered and show the influence of the nature of the organic group on self-assembly. Despite differences in morphology, degree of order, and different inter-domain spacings, all but the pure silicate-containing hybrid have the same PS domain width (25-30 nm). The dispersed nanoparticles are roughly spherical and some can grow to exceed the block copolymer domain sizes. All filled samples have inter-domain spacings, derived by SAXS analysis, that are larger than that of the corresponding unfilled sulfonated mSEBS, which reflects insertion of silicate or ORMOSIL structures. FTIR spectroscopy indicated successful Si-O-Si bond formation, which shows that the inserted particles are indeed crosslinked.     

Evolution of interphase in styrene-butadiene block copolymers as revealed by H solid-state NMR: Effect of temperature and molecular architecture

¹H spin-diffusion solid-state NMR, in combination with other techniques, was utilized to investigate the effect of molecular architecture and temperature on the interphase thickness and domain size in poly(styrene)-block-poly(butadiene) and poly(styrene)-block-poly(butadiene)-block-poly(styrene) copolymers (SB and SBS) over the temperature range from 25 to 80 °C. These two block copolymers contain equal PS weight fraction of 32 wt%, and especially, polystyrene (PS) and polybutadiene (PB) blocks are in glass and melt state, respectively, within the experimental temperature range. It was found that the domain sizes of the dispersed phase and interphase thicknesses in these two block copolymers increased with increasing temperature. Surprisingly we found that the interphase thicknesses in these two block copolymers were obviously different, which was inconsistent with the theoretical predictions about the evolution of interphase in block copolymer melts by self-consistent mean-field theory (SCFT). This implies that the interphase thickness not only depends strongly on the binary thermodynamic interaction (χ) between the PS and PB blocks, but also is influenced by their molecular architectures in the experimental temperature range.     

Synthesis of amphiphilic polyethylene-b-poly(l-glutamate) block copolymers with vastly different solubilities and their stimuli-responsive polymeric micelles in aqueous solution

This paper describes the synthesis, characterization, and self-assembly behavior of amphiphilic polyethylene-block-poly(l-glutamate) (PE-b-PGA) diblock copolymers. PE-b-PGA diblock copolymers were obtained by ring-opening polymerization (ROP) of γ-benzyl-l-glutamate-N-carboxyanhydride (BLG-NCA) using PE–COOCH(ⁱPr)NH₂ as a macroinitiator and subsequent deprotection of the benzylester groups. The self-assembly behaviors of the PE-b-PGA copolymers in water were studied as a function of pH and ionic strength by means of fluorescence spectroscopy, laser light scattering, UV-circular dichroism, and transmission electron microscopy. The size of the polymeric micelles decreases with a decreasing pH value even at high salt concentrations because the solvating PGA units can perform a coil-to-helix transition.     

Viscoelastic properties and morphology of sulfonated poly(styrene-b-ethylene/butylene-b-styrene) block copolymers (sBCP), and sBCP/[silicate] nanostructured materials

Self-assembled organic/inorganic hybrid materials were created via domain targeted sol-gel reactions of tetraethylorthosilicate in solution with sulfonated poly(styrene-b-[ethylene-co-butylene]-b-styrene) (sSEBS) copolymers. Dynamic mechanical analyses (DMA) of these hybrid materials suggest that the silicate component preferentially incorporates within the sulfonated polystyrene (PS) domains. An irreversible order-order transition (OOT) for unmodified SEBS, sSEBS, and the organic/inorganic hybrids was identified using DMA in shear mode. The OOT temperature increases with sulfonation as well as by adding a silicate phase by the sol-gel process. The DMA results imply a morphological shift with sulfonation, and reflect modified interactions within and between phases. Atomic force microscopy (AFM) indicated a shift from hexagonally packed cylinders in unmodified SEBS to a lamellar morphology in the sulfonated materials, but silicate incorporation did not affect the morphology or domain dimensions. The latter result is evidence for sol-gel polymerization templating in a self-assembly process. The phase-separated morphology is stable up to the degradation temperature of the polymer and thermogravimetric analysis revealed that the degradation temperature is unaffected by silicate incorporation. Small angle X-ray scattering data are in harmony with the structures revealed by AFM in terms of degree of order and scale of features. These results are largely rationalized in terms of chain mobility restrictions due to hydrogen-bonding interactions between different sulfonated PS blocks, an increase in the PS-ethylene/butylene block mixing parameter, increased interfacial surface tension and chain restrictions posed by inserted silicate nanostructures in the case of the hybrid materials.     

The amphiphilic block copolymers of 2-(dimethylamino)ethyl methacrylate and methyl methacrylate: Synthesis by atom transfer radical polymerization and solution properties

Amphiphilic di- and tri-block copolymers of poly(methyl methacrylate) (PMMA) and poly(2-dimethylamino)ethyl methacrylate (PDMAEMA) have been synthesized by atom transfer radical polymerization (ATRP) at ambient temperature (35 °C) in the environment-friendly solvent, aqueous ethanol (water 16 vol%) using CuCl/o-phenanthroline as the catalyst. The PDMAEMA blocks are contaminated with ethyl methacrylate (EMA) residues to the extent of 1-2 mol% of DMAEMA depending on the length of the PDMAEMA block. The EMA forms through the autocatalyzed ethanolysis of the DMAEMA monomer and undergoes random copolymerization with the latter. The rate of ethanolysis is unexpectedly greater in the aqueous ethanol than in neat ethanol, which has been attributed to the higher polarity of the former than of the latter. In contrast to the ethanolysis no hydrolysis of DMAEMA in the aqueous ethanol medium could be detected for 133 h. The block copolymers form micelles in water. Their solubility and CMC in neutral water have been studied. Dynamic light scattering (DLS) studies reveal that for a fixed degree of polymerization (DP) of the PMMA block the hydrodynamic diameter of the micelles in methanolic water (water 95 vol%) increases at a faster rate with the DP of the PDMAEMA block when it is much greater than that of the PMMA block compared to when it is less than or close to that of the latter.     

Design of novel poly(methyl vinyl ether) containing AB and ABC block copolymers by the dual initiator strategy

A new set of block copolymers containing poly(methyl vinyl ether) (PMVE) on one hand and poly(tert-butyl acrylate), poly(acrylic acid), poly(methyl acrylate) or polystyrene on the other hand, have been prepared by the use of a novel dual initiator 2-bromo-(3,3-diethoxy-propyl)-2-methylpropanoate. The dual initiator has been applied in a sequential process to prepare well-defined block copolymers of poly(methyl vinyl ether) (PMVE) and hydrolizable poly(tert-butyl acrylate) (PtBA), poly(methyl acrylate) (PMA) or polystyrene (PS) by living cationic polymerization and atom transfer radical polymerization (ATRP), respectively. In a first step, the Br and acetal end groups of the dual initiator have been used to generate well-defined homopolymers by ATRP (resulting in polymers with remaining acetal function) and living cationic polymerization (PMVE with pendant Br end group), respectively. In a second step, those acetal functionalized polymers and PMVE-Br homopolymers have been used as macroinitiators for the preparation of PMVE-containing block copolymers. After hydrolysis of the tert-butyl groups in the PMVE-b-ptBA block copolymer, PMVE-b-poly(acrylic acid) (PMVE-b-PAA) is obtained. Chain extension of the AB diblock copolymers by ATRP gives rise to ABC triblock copolymers. The polymers have been characterized by MALDI-TOF, GPC and ¹H NMR.     

Thermal analysis,glass transition temperature and rheological behaviour of emulsion copolymers of methyl methacrylate with styrene

Poly(MMA‐ran‐St) samples were synthesized under monomer‐starved conditions (drop feeding method) by emulsion copolymerization. Their thermostability was determined by thermogravimetric analysis. The glass transition temperature (T_g) of the copolymers was determined by differential scanning calorimetry (DSC) and torsional braid analysis (TBA). The results showed that the MMA–St copolymers exhibit an asymmetric T_g versus composition curve, which could not be interpreted by Johnston's equation, taking the different contributions of the diads to the T_g of the copolymer into consideration. A new sequence distribution equation taking into account the different contributions of the triads was proposed to predict the copolymer T_g. The new equation fitted the experimental data exactly. The T_g determined by torsional braid analysis (TBA) is higher than the one determined by DSC, but the difference is not constant. The rheological behaviour of the copolymers was also studied and T_gTBA‐T_gDSC increased with the increasing flow index of the copolymer. © 2003 Society of Chemical Industry     

Synthesis, characterization and thermal properties of hexaarmed star-shaped poly(ε-caprolactone)-b-poly(d,l-lactide-co-glycolide) initiated with hydroxyl-terminated cyclotriphosphazene

Hexakis[p-(hydroxymethyl)phenoxy]cyclotriphosphazene was prepared by the reaction of hexachlorocycltriphosphaneze with the sodium salt of 4-hydroxybenzaldehyde and subsequent reduction of aldehyde groups to alcohol groups by using sodium borohydride. Hexaarmed star-shaped hydroxyl-terminated poly(ε-caprolactone) (PCL) were successfully synthesized via ring-opening polymerization of ε-caprolactone (CL) with the above hydroxyl-terminated cyclotriphosphazene initiator and stannous octoate catalyst in bulk. The number-average molecular weight of PCL linearly increased with the molar ratio of monomer to initiator. The star-shaped PCL with hydroxy end groups could be used as a macroinitiator for block copolymerization with d,l-lactide (d,l-LA) and glycolide (GA) using stannous octoate catalyst. IR, ¹H NMR and GPC analysis showed the star-block copolymers were successfully synthesized and the molecular weights and the unit composition of the star-shaped block copolymers were controlled by the molar ratios of d,l-LA and GA monomers to CL. The copolymer presented a two-phase structure, namely, PCL crystalline and d,l-LAGA amorphous domains, which made the copolymer different from linear PCL and star-shaped PCL in crystallinity and thermal behaviors.     

Syntheses and specific interactions of poly(hydroxyethyl methacrylate-b-vinyl pyrrolidone) diblock copolymers and comparisons with their corresponding miscible blend systems

Combination of atom transfer radical and conventional free radical polymerizations has been successfully used to prepare poly(hydroxyethyl methacrylate-b-vinyl pyrrolidone) (PHEMA-b-PVP) copolymers with controlled molecular weight and low polydispersity (<1.4). The thermal behavior and specific interaction of PHEMA-b-PVP diblock copolymers and their corresponding PHEMA/PVP blends were characterized. The result shows that glass transition temperatures of diblock copolymers analysed by differential scanning calorimetry (DSC) are higher than those of the blends. Infrared and solid-state NMR spectroscopic analyses show that hydrogen-bonding interaction of hydroxyl-carbonyl groups of diblock copolymers was also greater than that of the blends. Measurement of the proton spin-lattice relaxation time in the rotating frame, , reveals that all diblock copolymers and blends possess one composition-dependent , indicating that both diblock copolymers and blends are homogeneous, which is consistent with the DSC analysis.     

Nanostructures and nanoporosity in thermoset epoxy blends with an amphiphilic polyisoprene-block-poly(4-vinyl pyridine) reactive diblock copolymer

Nanostructured thermoset blends were prepared based on a bisphenol A-type epoxy resin and an amphiphilic reactive diblock copolymer, namely polyisoprene-block-poly(4-vinyl pyridine) (PI-P4VP). Infrared spectra revealed that the P4VP block of the diblock copolymer reacted with the epoxy monomer. However, the non-reactive hydrophobic PI block of the diblock copolymer formed a separate microphase on the nanoscale. Ozone treatment was used to create nanoporosity in nanostructured epoxy/PI-P4VP blends via selective removal of the PI microphase and lead to nanoporous epoxy thermosets; disordered nanopores with the average diameter of about 60 nm were uniformly distributed in the blend with 50 wt% PI-P4VP. Multi-scale phase separation with a distinctly different morphology was observed at the air/sample interface due to the interfacial effects, whereas only uniform microphase separated morphology at the nanoscale was found in the bulk of the blend.     

Mesoscale simulation of block copolymers in aqueous solution: parameterisation, micelle growth kinetics and the effect of temperature and concentration morphology

In this work, we utilise ‘MesoDyn’ [J Chem Phys 99 (1993) 9202; 106 (1997) 4260] density functional simulations to study the effect of temperature and concentration on the micellar morphology of polymeric surfactants. Parameterisation strategies based upon atomistic models and experimental data are discussed. Taking the temperature dependence of interaction energy into account, the change in morphology of Pluronic (PEO-PPO-PEO) block copolymer structure with temperature is well reproduced. As a function of concentration, the diameter of spherical micelles is found to increase in line with previous cryo-TEM observations [Phys Chem Chem Phys 1 (1999) 3331]. Simulations of high concentration PEO-PBO diblock systems show ordering similar to the face-centered cubic structures found experimentally [J Polym Sci B 33 (1995) 1085; Macromolecules 30 (1997) 5721; Polymer 39 (1998) 4891; Phys Chem Chem Phys 1 (1999) 2773].     

Synthesis of amphiphilic rod-coil ABC triblock copolymers with oligo(para-phenyleneethynylene) as the middle rigid block

An amphiphilic rod-coil ABC triblock copolymers using rigid oligo(para-phenyleneethynylene) (OPE) as the middle rod segment, poly(ethylene oxide)-block-oligo(para-phenyleneethynylene)-block-polystyrene (PEO-b-OPE-b-PS), was designed and successfully synthesized. In the synthetic route, a kind of macroinitiator, PEO-b-OPE-Br was achieved by stepwise coupling of iodo-terminated poly(ethylene oxide) and oligo(para-phenyleneethynylene) with amino end group, capping with 2-bromopropionyl bromide. Subsequently, from this macroinitiator atom transfer radical polymerization (ATRP) of styrene was performed to obtain PEO-b-OPE-b-PS. The resulting copolymers were characterized by nuclear magnetic resonance (NMR) and gel permeation chromatography (GPC). All these novel copolymers were affirmed to have well-defined structures and narrow molecular weight distributions.