煤转化过程中汞的释放及其脱除

概述了燃煤烟气中汞的形态分布,重点介绍了吸附法、设备除汞法和化学氧化法等燃煤烟气中汞脱除技术;同时,对煤热解、气化过程中汞的释放量进行了分析。通过分析可知:活性炭吸附法是目前最为成熟的一种脱汞方法,包括活性炭法、改性活性炭法和活性炭纤维法等;在煤热转化过程中,产生的H_2S气体对氧化铁吸附剂的脱汞效率起着非常重要的作用。煤热解、气化过程中,将汞排放控制技术与硫化物的脱除技术相结合的脱汞方法,具有更好的应用前景。     

煤基吸附剂脱除燃煤电厂烟气中汞的研究进展

燃煤电厂产生的烟气是汞排放的主要来源之一。概述了目前电厂烟气中汞污染情况和主要脱汞方法,介绍了煤基吸附剂在汞污染控制中的应用。煤基吸附剂应用于烟气脱汞时其吸附活性与多种因素有关,总结了烟气中SO2,CO2,CO,HCl等成分对活性炭吸附剂脱汞性能的影响,讨论了不同吸附温度和炭汞比例下活性炭的吸附效率,分析了不同改性方法对活性炭脱汞效率的影响机理。针对活性炭脱汞成本较高的问题,介绍了飞灰吸附剂的脱汞性能及吸附温度和入口汞含量对其的影响。此外,褐煤活性焦成本低廉,具有丰富的比表面积和孔径结构,化学活性高,吸附性能好,是一种很有前景的电厂烟气脱汞用吸附剂。     

燃煤电厂吸附剂喷射脱汞技术的研究进展

燃煤汞污染已引起广泛关注。燃煤电厂控制汞排放最成熟可行的技术是烟道活性炭喷射技术,但该技术在我国燃煤电厂的广泛应用还存在较多的科学问题,因为活性炭对烟气汞的脱除是包含吸附、扩散、传质及化学反应在内的多元化过程,因此,针对燃煤电厂吸附剂喷射脱汞技术的研究已成为当前的热点课题。本文从吸附剂喷射脱汞技术原理、脱汞吸附剂的评价方法、汞吸附机理研究以及吸附剂喷射脱汞数学模型方面评述了燃煤电厂吸附剂喷射脱汞技术近些年取得的研究进展,并在此基础上提出了开发廉价高效、可再生的脱汞吸附剂,全面深入研究吸附剂的脱汞机理以及开发简单、精确的吸附剂喷射脱汞数学模型等后续研究方向,可为我国燃煤电厂吸附剂喷射脱汞技术的开发提供一定指导。     

燃煤烟气中单质汞吸附与氧化机理研究进展

燃煤电厂汞排放控制是当前的研究热点,实现燃煤烟气中汞的脱除涉及两个非常重要的过程：吸附与氧化。本文概述了汞在吸附剂表面吸附的相关理论和单质汞的催化氧化机理,结合碳基和非碳基吸附剂相关吸附特性的研究现状,对汞的吸附机理进行了讨论,回顾了SCR、碳基、以及金属和金属氧化物三种常见催化剂对单质汞的催化氧化性能并总结了其可能存在的机理。指出吸附剂表面活性位是决定其对汞吸附效果的关键因素,异相反应是单质汞氧化的重要途径,吸附和氧化是相辅相成的,不同催化剂不同气氛下氧化机理不同。并提出通过氯化物等物质改性能够提高吸附剂的吸附效果,深入研究汞的异相反应机理并开发经济有效的汞脱除方法是今后的研究方向。     

湿法脱硫工艺对汞的脱除性能研究进展

结合现有烟气湿法脱硫装置,评述了燃煤烟气中汞的性质以及形态分布和转化机理、湿法烟气脱硫系统(WFGD)的脱汞性能及其影响因素,简要介绍了WFGD 中单质汞的重新排放以及如何抑制;并在此基础上探讨了如何通过提高单质汞的氧化率来提高脱硫液对总汞的脱除效率.     

溴元素改性椰壳活性炭对实际燃煤烟气的脱汞性能

以椰壳活性炭（YAC）为原料,通过NH₄Br溶液浸渍改性,制备了溴素改性椰壳活性炭脱汞吸附剂（YAC-Br）。在固定床实验台上开展了YAC和YAC-Br的汞脱除实验,主要研究了入口汞（Hg⁰）浓度对YAC-Br脱汞性能的影响,并结合BET、SEM、XRF等表征手段分析了YAC-Br的脱汞原理。在0.3MW燃煤循环流化床锅炉上对YAC-Br进行了烟气管道喷射吸附剂脱汞（ACI）实验,验证了其在实际燃煤烟气中对汞的脱除效果。结果表明：改性过程不会破坏椰壳活性炭原有的孔隙结构和微孔容积,而会使活性炭表面更加平整;化学改性后活性炭表面Br负载量提高,成为Hg⁰的主要活性吸附位。固定床实验结果说明：改性后椰壳活性炭的初始汞吸附效率和单位累积汞吸附量分别提高了6.02倍和21.8倍,吸附效率随汞浓度增大而降低。0.3MW燃煤循环流化床实验结果表明：改性后椰壳活性炭对元素汞和氧化汞均有很好的脱除作用,脱汞效率随着吸附剂喷射量的增加而增加,当喷射量为0.7kg/h时,脱汞效率可达到76.38%。     

改性燃煤飞灰吸附氧化脱汞机理研究进展

元素汞是燃煤电站汞污染防治工作的难点,研究开发高效价廉的汞吸附剂已被作为科技攻关重点方向。燃煤飞灰经卤化物改性后脱汞潜力强、成本低,但必须研究掌握其吸附氧化Hg0的作用机制。本文系统综述了飞灰作为脱汞材料在国内外燃煤烟气汞污染控制方面的研究进展。论述了物化特性、烟气组分、卤素等因素对飞灰脱汞性能的影响,指出未燃尽炭和无机矿物组分表面活性位上的非均相反应是Hg0氧化脱除的关键。分析了残炭和磁珠作为载体材料的优缺点,并讨论了不同改性剂和改性方法对飞灰直接改性的影响。总结了HBr改性飞灰对Hg0的吸附氧化机理,并提出利用量子化学理论与宏观实验研究相结合的方式探索Hg0在飞灰表面上的成键特征及反应动力学特性应作为今后的研究方向。     

改性活性炭吸附单质汞的研究现状

汞污染主要来自于人为的燃煤烟气排放,而烟气汞污染控制的难点在于气态单质汞的脱除。活性炭吸附法是较为成熟且效果较好的一种方法,本文对近10年来改性活性炭吸附单质汞的研究状况进行综述。     

凹凸棒石烟气脱汞吸附剂的研究进展

吸附剂喷射法是目前脱除燃煤烟气中单质汞(Hg~0)的有效方法之一,其关键问题是吸附剂。凹凸棒石不仅结构独特、性能优越、价廉易得、不污染环境,而且经过适当的改性处理后表现出良好的脱汞性能,具有工业应用前景。本文介绍了凹凸棒石的吸附特性及其在燃煤烟气汞脱除中的应用进展。总结了天然凹凸棒石和改性凹凸棒石吸附剂的汞脱除效果以及采用的改性剂和改性方法,分析了此类吸附剂的脱汞机理,同时还讨论了烟气组分、吸附反应温度和吸附剂用量对吸附剂脱汞性能的影响,最后指出在下一步研究中应进一步开发性能更优、更具稳定性的有机无机复合改性吸附剂,同时更加深入地分析其脱汞机理,争取早日实现工业应用。     

燃煤电厂协同脱汞研究进展及强化措施

燃煤电厂是大气汞排放的重要源头,但是我国目前尚无完善的烟气汞控制方案。本文简要综述了国内外烟气脱汞技术研究现状,统计了国内污控设备（包括脱硝设备、除尘设备和脱硫设备）的装机容量。指出污控设备对烟气汞具有一定的协同脱除作用,但是受到我国煤质及运行条件等因素的制约,效果并不理想。本文结合国内某燃煤电厂的实测情况,提出了以下强化措施：①通过添加溴盐溶液,提高选择性催化还原（SCR）对烟气汞的氧化效率;②通过粉末活性炭与溴盐联合使用,强化静电除尘器（ESP）对烟气汞的协同脱除效率,脱汞效率可达90%以上;③通过精确控制脱硫浆液的pH值以及定期外排脱硫浆液,以降低其中汞的再释放率,维持湿法脱硫工艺（WFGD）稳定的烟气汞协同脱除效率;④通过优化和调整锅炉运行条件,提高现有污控设备体系的协同脱汞能力。     

乙烯酮(双乙烯酮)下游产品废水的治理技术

乙烯酮(双乙烯酮)是十分重要的化工中间体,其下游产品较多。江苏某化工厂开发生产乙烯酮(双乙烯酮)下游产品三十多个,年生产规模三万多吨,是国内以乙烯酮(双乙烯酮)为中间体生产精细化学品的综合骨干企业。针对乙烯酮(双乙烯酮)下游产品废水特点,该厂结合企业实际,开展了产品优化,结构调整,清洁生产,资源循环利用,节水降耗等工作,从源头削减了污染物的生产。同时投资二千多万元新建预处理装置三套,6000m3/d废水生化处理装置一套,使全厂乙烯酮(双乙烯酮)下游产品的废水得到了有效的治理。     

几种乙炔加压设备性能的比较

阐述并比较了几种加压设备在乙炔加压清净过程中的性能和特点。     

三种煤样燃烧热的测定

本文通过三个厂家提供的三种煤样燃烧热的测定,由测定结果综合得出3号煤样燃烧最完全、燃烧热也最大,是三个煤样中最好的一种。     

Semi-empirical equation of state of metals. Equation of state of aluminum

A semi-empirical equation of state for metals is described. Its capabilities are demonstrated by the example of the equation of state for aluminum. New experimental data are presented on the location of the isentrope of aluminum for unloading from the state at p = 229.71 GPa on the shock adiabat to an aerogel (SiO₂) of density 0.08 g/cm³. __________ Translated from Fizika Goreniya i Vzryva, Vol. 44, No. 2, pp. 61–75, March–April, 2008.     

水泥水化热测定方法综述

水泥水化热是中、低热水泥和核电工程用水泥的一项关键的技术指标。全球范围内测定水泥水化热的方法有溶解法、直接法/半绝热法、等温传导量热法三种。本文总结了中、美、欧相关方法标准,对其测试原理、仪器设备、试验过程等方面进行了比对,并对其在领域的应用做了简单的概括。     

Calorimetric and Computational Study of Enthalpy of Formation of Diperoxide of Cyclohexanone

A thermochemical rather simple experimental technique is applied to determine the enthalpy of formation of Diperoxide of ciclohexanone. The study is complemented with suitable theoretical calculations at the semiempirical and ab initio levels. A particular satisfactory agreement between both ways is found for the ab initio calculation at the 6–311G basis This set level. Some possible extensions of the present procedure are pointed out.     

我国聚碳酸酯工业发展概况

介绍我国聚碳酸酯生产能力和消费需求,对聚碳酸酯在信息工业中的应用作了简短介绍     

小议汽车涂装工艺设计对涂装成本的影响

论述了涂装工艺设计对涂装设备投资、涂装生产成本的影响。     

Effect of degree of deacetylation of chitosan on the kinetics of ultrasonic degradation of chitosan

The objective of the study was to explore the effect of the degree of deacetylation (DD) of the chitosan used on the degradation rate and rate constant during ultrasonic degradation. Chitin was extracted from red shrimp process waste. Four different DD chitosans were prepared from chitin by alkali deacetylation. Those chitosans were degraded by ultrasonic radiation to different molecular weights. Changes of the molecular weight were determined by light scattering, and data of molecular weight changes were used to calculate the degradation rate and rate constant. The results were as follows: The molecular weight of chitosans decreased with an increasing ultrasonication time. The curves of the molecular weight versus the ultrasonication time were broken at 1‐h treatment. The degradation rate and rate constant of sonolysis decreased with an increasing ultrasonication time. This may be because the chances of being attacked by the cavitation energy increased with an increasing molecular weight species and may be because smaller molecular weight species have shorter relaxation times and, thus, can alleviate the sonication stress easier. However, the degradation rate and rate constant of sonolysis increased with an increasing DD of the chitosan used. This may be because the flexibilitier molecules of higher DD chitosans are more susceptible to the shear force of elongation flow generated by the cavitation field or due to the bond energy difference of acetamido and β‐1,4‐glucoside linkage or hydrogen bonds. Breakage of the β‐1,4‐glucoside linkage will result in lower molecular weight and an increasing reaction rate and rate constant. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3526–3531, 2003     

Measurement of the gradient of viscosity with composition of mixtures of non-ideal gases

A perturbation viscometer is a differential capillary viscometer that measures the logarithmic viscosity gradient of the viscosity-composition curve for gas mixtures. Measurements are made at different gas mixture compositions. Integration of the logarithmic viscosity gradients measured over the full composition range gives the mixture viscosity relative to the viscosity of one of the pure components of the gas mixture. This method is attractive because, for measurements of equal precision, integration of the gradients is potentially an order of magnitude more precise than measurement of the viscosities directly. It can also work at high and low temperatures and perhaps high pressures.The perturbation viscometer has been used to make measurements on ideal gas mixtures at ambient and elevated temperatures. The situation is more complicated when the gas mixtures are non-ideal. Extra effects due to density differences, molar volume change on mixing and differential thermal expansion may be measured in addition to the desired viscosity change producing systematic errors in the results. Thus, a more sophisticated apparatus is required. The standard perturbation viscometer has been modified to separate out the extra effects to permit measurement of the true change in viscosity. In addition, the theoretical operation of the modified apparatus has been revised to account for the design changes to permit calculation of the viscosity-composition profiles from the results.The apparatus has been tested using helium-HFC-125 mixtures and two new viscosity-composition profiles are presented for these mixtures at 23 and . Internal consistency tests have been used to confirm that the data produced are of high quality with an estimated uncertainty in the viscosity ratio data at of 0.9% and at of 1.5%.