共查询到20条相似文献,搜索用时 140 毫秒
1.
2.
介绍了求解导热问题的一般方法,提出了点热源和线热源两种物理模型,并使用MATLAB对其进行数值求解,分析了不同加热功率、不同网格划分对温度场的影响;分析了数值计算引起的误差原因及其所提及的两种物理模型的工程应用价值。 相似文献
3.
VB与FORTRAN混合编程的两种方法及其比较 总被引:3,自引:2,他引:3
介绍和比较VB直接调用Fortran编译的可执行文件和VB调用Fortran动态链接库两种实现VB和Fortran混合编程的方法,给出了实现VB和Fortran混合编程的具体实例,得出了两种方法各自的优缺点。 相似文献
4.
5.
天津静海团泊风景区地下热水资源评价的数值模拟 总被引:1,自引:0,他引:1
针对静海团泊风景区地热地质的非均质各向异性特点、地下资源储量及水资源补给可能性,采用集参模型和分布参数模型两种不同的评价方法,并根据不同的物理模型,分别用有限元及有限差分两种数学离散方法进行数值模拟研究,成功地模拟和预测了地热集中开采地域的热储开采条件及开发趋势。 相似文献
6.
7.
两种简单可靠的锅炉安全运行保护装置 总被引:2,自引:1,他引:1
许多中小型企业在实践中总结出自己独特的方法对锅炉进行监控报警操作,这些方法原理简单、操作方便、经济实惠,给司炉工带来了极大的便利,对设备起到了安全保护作用,给企业创造了一定的经济效益。现介绍两种简单易行的保护装置。 相似文献
8.
9.
本文通过对调速器现有的两种死区测试方法的比较,在脉冲法的基础上,提出了一种更为便利、准确的测试方法.利用微机调速器自身来实现其转速死区的自动测量.本文阐述了该方法的基本原理,介绍了其软、硬件的构成与实现,最后给出了试验结果,指出了今后的发展方向. 相似文献
10.
故障树的模糊分析是传统的故障树分析的推广,具有更广的适用范围。从工程实际出发,提出了一种混合型故障树模糊分析的方法,从而为燃气轮机等复杂系统的可靠性定量分析提供了一种有效的工具。该方法兼有传统故障树分析和常规故障树模糊分析两种方法的优点,工程实用性好。并结合燃气轮机的应用实例,研究了具体的应用方法。 相似文献
11.
在换热器的传热性能试验中,对流换热系数的测定是重要的一个组成部分,对流换热系数的测定方法有很多种,但都有各自的应用范围和条件。对于板式换热器而言,用等雷诺数法来获得其对流换热系数是比较合适的一种方法,文中介绍了等雷诺数法的原理及其在板式换热器中的应用。通过实例,介绍了具体的试验及计算方法。 相似文献
12.
三相共箱式气体绝缘母线的热计算及散热性能研究对于其可靠性设计及在线监测具有重要意义。根据流体力学理论,采用流体多组分有限元法对三相共箱式气体绝缘母线进行热计算,利用映射网格划分实现电磁场、温度场和流体场的间隔耦合,综合考虑了母线外壳内外气体的流动和温度变化特性。采用流体单组分有限元法、流体多组分有限元法、传热学解析公式法三种方法进行计算,并对比分析了计算结果与试验结果的精度。结果表明,多组分有限元法与试验结果最为接近,为气体绝缘母线的设计及在线监测提供了理论基础。 相似文献
13.
Two new analytical methods to solve nonlinear heat transfer equations are homotopy perturbation method and homotopy analysis method. Here, homotopy analysis method, which gives us a vast freedom to choose the answer type, is applied to solve nonlinear heat transfer differential equations and analytical results are compared with those of HPM and the numerical results. In this study, the procedure of HAM is applied to two cases in different ways according to the physics of the target problem. Comparing the two methods, our attention is focused on the results accuracy; and applicability of different methods in many cases with different limitation is studied. In the two examples of this paper, the effect of small parameter increaser on the accuracy of the analytical results of two methods also has been studied. The first differential equation is the modeling equation of a cooling lumped system with combined convection and radiation. The second one is the modeling equation of heat transfer with conduction in a slab of thermal dependent conductivity. 相似文献
14.
曲线拟合法是换热器传热性能实验中经常用到的一种方法,但传统的曲线拟合法存在较多的缺陷。所介绍的曲线拟合法限定条件较少,实用性强。对气体采用温度修正函数时,能够扩大该曲线拟合法适用的温度变化范围。当两侧的流体种类和流体通道相同时,其优点将更加明显。 相似文献
15.
In this paper the D2Q9 lattice Boltzmann method (LBM) was utilized for the solution of a two-dimensional inverse heat conduction (IHCP) problem. The accuracy of the LBM results was validated against those obtained from prevalent numerical methods using a common benchmark problem. The conjugate gradient method was used in order to estimate the heat flux test case. A complete error analysis was performed. As the LBM is attuned to parallel computations, its use is recommended in conjugation with IHCP solution methods. 相似文献
16.
炉膛传热计算方法的发展状况 总被引:14,自引:1,他引:14
对锅炉炉膛传热计算方法的发展状况及现有的主要计算方法进行了分析,指出了目前工程设计计算中应优先选用的方法以及炉膛传热计算方法研究的方向。 相似文献
17.
本文介绍了用于余热锅炉等传热部件的翅片管设计准则和翅片管结构型式和连接方法,分析了不同翅片管结构尺寸及型式对传热特性的影响,提出改善传热特性的途径。 相似文献
18.
研究和分析加热器经济性指标与运行工况的关系、更好地掌握加热器系统特征、提高系统的运行水平是提高机组经济性和安全性的关键。运用基于热力学第一定律的等效焓降法和基于热力学第二定律的分析法对加热器系统特征进行分析研究。等效焓降理论热力系统热经济性计算的通用矩阵方程能有效克服热经济性矩阵分析方法需要联立其它方程才能求解热力系统最终热经济性指标的缺陷。分析法为评价能量转换的"量"和"质"提供了统一的尺度。综合考虑上述方法,分析加热器系统特征,为准确评价热力系统的热经济性提供依据。 相似文献
19.
非理想相变特性材料热性能简化分析方法及适用条件 总被引:4,自引:1,他引:4
采用焓法、分析了蓄能相变材料相变区比热特性性对其蓄换热性能的影响。该方法对潜热型蓄换热系统的热性能分析和计算是普适的。针对该方法较为复杂而理想相变材料(相变温度为一点)热特性的分析较为简单并有大量结果可供参考的特点,讨论了采用对理想相变材料适用的蓄换热性能分析方法和公式来计算相变温度为一个温度区间的非理想相变材料蓄换热特性的适用条件。所得结论拓宽了理想相变材料蓄换热性能分析方法及结果的适用范围。在很多情况下,大大简化了非理想相变材料蓄换性能的分析和计算,对各种蓄能相变换热器的设计和性能优化具有指导意义。 相似文献
20.
Analysis of Conduction and Radiation Heat Transfer in a Differentially Heated 2‐D Square Enclosure 下载免费PDF全文
Radiative heat transfer with and without conduction in a differentially heated 2‐D square enclosure is analyzed. The enclosure with diffuse gray boundaries contains radiating and/or conducting gray homogeneous medium. Radiatively, the medium is absorbing, emitting and scattering. On the south boundary, four types of discrete heated regions, viz., the full boundary, the left one‐third, left two third and middle one third, are considered. In the absence of conduction, distributions of heat flux along the south boundary are studied for the effect of extinction coefficient. In the presence of conduction, distributions of radiation, conduction and total heat fluxes along the south boundary are analyzed for the effects of extinction coefficient, scattering albedo, conduction–radiation parameter, and south boundary emissivity. Effects of these parameters on centerline temperature distribution are also studied. To assess the performance of three commonly used radiative transfer methods, in all cases, the radiative transfer equation is solved using the discrete ordinate method (DOM), the conventional discrete ordinate method (CDOM) and the finite volume method (FVM). In the combined mode problem, with volumetric radiative information known from one of the three methods, viz., DOM, CDOM, and FVM, the energy equation is solved using the finite difference method (FDM). In all cases, the results from FDM‐DOM, FDM‐CDOM, and FDM‐FVM are in good agreement. Computationally, all three sets of methods are equally efficient. 相似文献