共查询到20条相似文献,搜索用时 109 毫秒
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
王文龙 《中国眼镜科技杂志》1994,(4)
一、三诀: 1.低姿态——尊重顾客,热心为其当参谋,使其高兴。 2.亮语言——您好,请坐,没关系,请提宝贵意见,欢迎再来,再见。 3.欣微笑——象对待亲友一样,脸上始终有诚恳的笑容。 二、六易: 1.易看到——商店装璜、招牌、独树一帜,醒目漂亮。 2.易进来——店面敞开(或自动门)进出自如。 3.易走动——在商店中可随意挑选,从容购物。 4.易视内——陈列商品高度适当(120~160cm)在 相似文献
11.
国内外纺织厂空气加湿技术的发展 总被引:3,自引:4,他引:3
系统介绍了国内外纺织厂空气加湿技术的现状,介绍了空调系统加湿和车间直接加湿的各种形式,现有各种纺织空气加湿设备的功能特性、适用场所,分析了目前空气加湿技术存在的主要问题,指出了今后空气加湿技术的发展方向。 相似文献
12.
13.
分析了电捕集除尘原理用于空气净化的可行性,指出了空气净化与工业除尘的异同点,根据捕集效率方程,讨论了有效驱进速度、集尘面积、气流流量对空气净化器工作效率的影响,给出了空气净化器的设计要点。 相似文献
14.
为确定喷气织机喷嘴气压,以JAT 710 喷气织机为例,采用最小二乘法确定了主喷嘴气压的计算公式。采集了512组织机的实际喷嘴气压配置数据,根据喷嘴气压配置理论,筛选出了76个合理的机台喷嘴气压配置方案,从理论和数据2个方面分析并推导了喷嘴气压确定公式。根据织物品种的织造数据,使用逐步回归法求解出喷嘴气压回归方程,结果表明:94.67%的拟合主喷嘴气压与实际主喷嘴气压的偏差能保持在±15%以内。使用18个合理的机台喷嘴气压配置对回归方程进行验证,所有的主喷嘴预测气压与实际主喷嘴气压的偏差能保持在±15%以内。证明该喷嘴气压回归方程能准确预测合理的喷嘴气压配置方案,提高实际生产效率。 相似文献
15.
简述了气流拉伸的原理、特点,比较了几种气流拉伸工艺形式的优缺点,分析了气流拉伸工艺中的各种因素对纤维网性能的影响. 相似文献
16.
17.
为实现防寒服保暖性能的动态调节,研发了以空气为保暖材料的Mountain充气夹克,采用外置手动按压充气泵连续改变充气量及其保暖性能。基于暖体假人实验,在不同充气量、有无袖子、是否穿抓绒衣3种实验条件下测试了充气夹克的局部热阻和总热阻,对比了NuDown充气夹克的隔热性能。实验结果表明:充气状态下的局部热阻和总热阻明显高于未充气状态,充气量会显著影响热阻,充气量越大服装热阻越高,且Moutain充气夹克在充气状态下比NuDown充气夹克具有更佳的保暖调节能力;有袖子时的局部热阻和总热阻明显高于无袖子状态,腹部和背部表现尤为明显;穿抓绒衣可有效增加服装系统热阻,但会很大程度地影响充气夹克的保暖调节能力。 相似文献
18.
An air drawing model of polymers and a model of the air jet flow field model in wide slot positive pressure spunbonding process are established. The air jet flow field model is solved by means of the finite difference method. The numerical simulation computation results of distributions of the air velocity match quite well with the experimental data. We find that the variation of the density and the specific heat capacity of polymer melt at constant pressure with polymer temperature have much effects on fiber diameter. The newly developed formulas were incorporated into a spunbonding theoretical model to predict the fiber diameter of nonwoven web. The air drawing model of polymer is solved with the help of the distributions of the air velocity measured by a Particle Image Velocimetry (PIV). The predicted fiber diameters agree with the experimental data well. It can be concluded that the higher air pressure, higher air velocity and air temperature can yield the finer fibers diameter. The higher inlet pressure and smaller jet angle will all cause higher x-axis position of air velocity and air pressure, which are beneficial to the air drawing of the polymer melt and thus to reducing the fiber diameter. 相似文献
19.
阐述影响拉幅热风烘燥效率的主要因素,指出采用低施液及湿度控制以减少排气热能损失,是节能减排的重要技术.织物从含水率68%降至38%进入烘房,在最佳气氛湿度20%下拉幅烘燥,可节省蒸汽69.63%;采用热管式气/气热回收,具有非常高的能效;湿式静电废气处理系统应用于热风拉幅定形机可净化热回收. 相似文献
20.
对气浮法回收硫酸盐木素工艺中的影响因素:混合器的结构、溶气时间、停留时间、压力、温度、溶气方式等进行了讨论,设计出工艺先进、结构合理、回收效率高的气浮装置. 相似文献