Bonding of solid additives in cokes from coals: a microscopy study

Cortonwood Silkstone (NCB class 401) and Betteshanger (NCB class 301 a/204) coals were co-carbonized with solid additives such as anthracite, coke breeze, green and calcined petroleum cokes. The resultant carbonization products (cokes) were examined by optical microscopy and SEM was used to investigate polished surfaces etched by chromic acid and fracture surfaces. For both coals only the anthracite and green petroleum coke become bonded to the coal cokes. This probably results from softening and interaction of interfaces of the anthracite and green coke with the fluid coal via a mechanism of hydrogenating solvolysis during the carbonization process. The coke breeze and calcined petroleum cokes were interlocked into the matrix of coal coke.     

Optical anisotropy of carbonized coking- and caking-coal vitrains

The purpose of this work was to characterize in detail the optical anisotropy formed during carbonization of the range of coals used in the coking industry, the ultimate objective being to attain a better understanding of the coking process. Vitrains hand-picked from a series of coking and caking coals were carbonized to various temperatures between 380 and 1000 °C. The semicokes and cokes so produced were examined by polarized-light microscopy to determine the proportions of the different types of optical anisotropy developed during carbonization. The results demonstrated that coals normally grouped within one class of the coal classification system used by the National Coal Board can lead to cokes which are significantly different in terms of their optical anisotropy. The process of the anisotropic development during carbonization can be explained generally in terms of loss of volatile matter, variations in viscosity of the plastic mass, and distortion of ordered phases by the pressure of evolving gases. Differences in carbonization behaviour as judged by the coke anisotropy can be attributed to differences in the ‘molecular-structure’ of the parent coal. In this respect the oxygen in the coal is considered to be of primary significance.     

Co-carbonization of hard coals and coal extracts 2. The co-carbonization of medium- and high-rank coals with extracts

Studies on the influence of anthracene coal extracts on the carbonization process of medium- and high-rank coals were undertaken. Extracts from flame coal (Int. Class. 900) and gas-coking coal (Int. Class. 632) were used as additives. The blends prepared from the examined coals and the extracts exhibited better coking properties than the parent coals. The addition of extract to the coals gave an increase in the microstrength of the resultant cokes. The effects of co-carbonization of coking coals with extracts were increases in the size of the optical texture as well as in the degree of structural ordering of cokes. In the co-carbonization of semicoking coal with addition of coal extracts, a reduction in the size of the anisotropic units and a decrease in the crystallite height of cokes were observed. No modification of the basic anisotropy of coke from anthracite by coal extract was observed. With increasing extract content in anthracite/extract blends there was an increase in the degree of structural ordering of co-carbonization products. Extract addition was unable to modify the behaviour of fusinite. Based on the results of investigation of the influence of coal extracts on the carbonization of different-rank coals, a division of coals according to the modification of the optical texture of coke is given.     

Carbonization of coal blends: mesophase formation and coke properties

Laboratory investigations of strength of cokes from blends of coals incorporating pitch were supported by 7 kg trials. The stronger cokes showed a greater interaction between coal and pitch to produce an interface component of anisotropic mozaics which is relatively resistant to crack propagation. The process whereby coal is transformed into coke includes the formation of a fluid zone in which develop nematic liquid crystals and anisotropic carbon which is an essential component of metallurgical coke. Strength, thermal and oxidation resistance of coke can be discussed in terms of the size and shape of the anisotropic carbon which constitutes the optical texture of pore-wall material of coke. Coals of different rank form cokes with different optical textures. Blending procedures of non-caking, caking and coking coals involve the interactions of components of the blend to form mesophase and optical texture. Petroleum pitches used as additives are effective in modifying the carbonization process because of an ability to participate in hydrogen transfer reactions.     

Effects of additions of petroleum coke in coals upon strengths of resultant cokes

Coals of NCB rank 301, 401 and 502 were co-carbonized with pitch-coke breeze pre-carbonized to temperatures between 900–1200 K, in the ratio 9:1. The objective was to provide fundamental information concerning the effect of inert components upon strength of metallurgical coke; these inert components occur naturally in coals and may also be added to coking blends as coke breeze. Polished surfaces of resultant cokes were examined by optical microscopy and fracture surfaces were examined by SEM to investigate the coal-coke/pitch-coke interface for bonding between components and fissure propagation across the interface. Strengths of cokes were measured using a micro-strength apparatus. For three coals, pitch-coke breeze (900 K and highest volatile content) bonded best to the surrounding coal-coke. The interface became increasingly fissured with increasing pre-carbonization temperature of pitch-coke.     

Carbonization and liquid-crystal (mesophase) development. 10. The co-carbonization of coals with solvent-refined coals and coal extracts

Coals (NCB rank 102 to 902) were co-carbonized with solvent-refined coals and coal extracts, mixing ratio of 7:3, to 873 K, heating at 10 K min^?1 with a soak period of 1 h. Resultant cokes were examined in polished section using reflected polarized-light microscopy and optical textures were recorded photographically. These optical textures were compared to assess the ability of the additive pitch to modify both the size and extent of optical texture of resultant cokes. The objective of the study is to provide a fundamental understanding of the use of pitch materials in co-carbonizations of lower-rank coals to make metallurgical coke. A Gulf SRC was able to modify the optical texture of cokes from all coals except the anthracite. Soluble fractions of this Gulf SRC were less effective than the parent SRC. A coal extract (NCB D112) modified coke optical texture, the extent being enhanced as the rank of coal being extracted was increased. Hydrogenation of the coal extract increased the penetration of the pitch into the coal particles but simultaneously reduced the size of the optical texture relative to the non-hydrogenated pitch. This indicates a positive interaction of pitch with coal in the co-carbonization process. The optical texture of the cokes from the hydrogenated coal extract in single carbonizations was larger than that from the non-hydrogenated material. Mechanisms explaining these effects are briefly described.     

Structure in metallurgical cokes and carbons as studied by etching with atomic oxygen and chromic acid

Anisotropie carbons and cokes exhibit an optical texture or micro-texture in the size range 0.5–300 μm in polished surfaces using optical microscopy. Structure within this optical texture can be studied as the topography created by etching surfaces with atomic oxygen and chromic acid. Atomic oxygen preferentially etches an isotropic carbon layer which exists between the grains of the fine-grained mozaics. Chromic acid oxidizes or etches selectively the surfaces of anisotropic carbon to create fissures parallel to basal plane orientation. Structural components within petroleum cokes, carbon fibres and carbon/carbon fibre composites are revealed. Chromic acid oxidizes isotropic components in metallurgi-cal cokes more slowly and so reveals the structure of cokes as prepared from co-carbonizations of coal with petroleum pitch. It is considered that these etching techniques augment our knowledge of internal structure within carbons and cokes and of considerations of strength and fracture in these materials.     

Development of optical anisotropy in vitrains during carbonization

The purpose of this work was to examine the possible significance in the formation of metallurgical coke of the anisotropic spherical mesophase exemplified by that found during the carbonization of pitch-like materials, and to ascertain if the various types of optical anisotropy found in coke could form a basis for the characterization of cokes produced from different coals. Vitrains from a wide range of coals were carbonized at temperatures from 370 to 1000 °C and the types and amounts of optical anisotropy in the resulting semi-cokes and cokes were determined from microscopic examination, the anisotropic components being classified according to grain size of the granular mosaics and appearance. The anisotropy developed directly from the isotropic phase, appearing initially as a fine-grained mosaic. With increasing carbonization temperature, this fine-grained mosaic was transformed into progressively coarser-grained anisotropy, the extent of this transformation depending on the rank of the vitrain. It is therefore concluded that the formation, growth and coalescence of anisotropic spherical bodies, such as occurs during the carbonization of pitch, is not a necessary precursor of the mosaic anisotropy in coke. The type and amount of anisotropy developed provide a quantitative means of characterising different cokes.     

Co-carbonization of hard coals and coal extracts 1. The co-carbonization of low rank coals with extracts

Studies on the influence of an additive derived from coal on the coking properties of lower-rank coals and on the structure of cokes obtained from blends have been undertaken in our laboratory since 1978. The two coal extracts from flame coal (Int. Class. 900) and gas-coking coal (Int. Class. 632) were used as additives. The results indicate that the blends prepared from low-rank coals — flame coal (Int. Class. 900), gas-flame coal (Int. Class. 721) and the extracts possess better coking properties in comparison to the parent coals. The optical texture and the degree of structure ordering of the cokes obtained from blends is related to the amount of extract in the blend. With increasing extract content in the blend, increases were observed in the amount of optically anisotropic areas in cokes from low-rank coal/extract blends and the crystallite height (L_c) of cokes from the blends. The isotropic optical texture of cokes from low-rank coals can be modified by coal extracts to an anisotropic optical texture. The non-fusible coal is the most difficult to modify. An explanation of the observed phenomena is given.     

Carbonization and liquid-crystal (mesophase) development. Part 4. Carbonization of coal-tar pitches and coals of increasing rank

Coal-tar pitches, from coals of different rank and with various quinoline-insoluble contents, were carbonized under pressure (67 to 200 MN m⁻²) to maximum temperatures of 923 K. The resultant cokes were examined by optical and scanning electron microscopy in terms of size and shape of anisotropic structures within the coke. Natural quinoline-insolubles and carbon blacks both destroyed growth of the mesophase and development of anisotropy. Graphite particles (<10 μm) promoted growth and coalescence of the mesophase. Fourteen coals, of carbon content 77 to 91 wt%, VM 41 to 26%, were similarly carbonized under pressure. In the lower-rank coals no microscopically resolvable anisotropic mesophase was produced, but at a carbon content of 85% anisotropic units 1–2 μm in diameter were detected, increasing in size at a carbon content of 90% to 5 μm diameter. Results are discussed in terms of the origins of anisotropic mosaics observed in cokes, their variation in size with coal rank, and their significance in the carbonization of coal.     

Structure of the cokes obtained from the group components separated from coking coal vitrites by selective thermosolvolysis

The examination of the structure of cokes obtained from extracts separated from preheated vitrites of coking coals by progressive and continuous extraction with chloroform was carried out. The structural ordering (interplanar spacing and crystallite dimensions) of the cokes depends on the rank of the parent vitrites but it does not depend on the degree of extraction. The occurrence of optical anisotropy in cokes from the extracts is connected with both the rank of the parent vitrite and the degree of extraction. In the formation of the optical anisotropic structure during the carbonization of coking coal vitrites, the part of the extract which is of small size, which partially undergoes decomposition, is an important factor.     

Structure of cokes from coking coal vitrites

The coking process of vitrites and thermobitumens separated from vitrites was examined; structural X-ray and microscopic examinations of the cokes obtained were carried out. A correlation between reflectance distribution of vitrites and microscopic structure of their cokes was found.An increase in the structural ordering of the cokes from vitrites, passing from cokes of gas coal to cokes of orthocoking coals, is observed. It is accompanied by an increase of the optical anisotropy of the resultant cokes; this anisotropy first appears in coke from gas-coaking coal.The cokes from the thermobitumens are lower ordered than the cokes from parent vitrites but all these cokes are partially or entirely optically anisotropic.Total removal of the thermobitumens from coals deprives the cokes from the residues after the extraction of any optical anisotropy.     

Carbonization and liquid-crystal (mesophase) development. 13. Kinetic considerations of the co-carbonizations of coals with organic additives

Five coals, of rank from an anthracite to a non-caking coal, have been carbonized singly and also cocarbonized with decacyclene, mixing ratio 7:3, in the temperature range 648 K to 823 K, heating at 10 K min^?1, with various soak times. The objective of the study is to derive the basic factors which influence the kinetics of formation of mesophase and anisotropic coke. Accordingly, resultant cokes were polished and surfaces examined by reflected polarized light in an optical microscope. The size, shape and extent of anisotropic development is discussed in terms of the conditions of carbonization and the rank of coal. In these systems a somewhat larger optical texture results in cokes produced at the higher carbonization temperatures. The temperature of onset of growth of anisotropic carbon in co-carbonizations was below that of either the coal or the decacyclene. Reactivities are evidently modified. The origins, growth and coalescence of growth units of anisotropic carbon in these cocarbonizations of coals with decacyclene are demonstrated.     

A scanning electron microscope study of fractured and etched metallurgical coke surfaces

The object of this work was to attempt to link more closely coke strength and structure by establishing whether features visible on fracture surfaces could be identified with coke carbon textural constituents revealed either by polarized light microscopy of polished surfaces or by scanning electron microscopy of atomic oxygen-etched surfaces. The cokes used were produced in a laboratory furnace from coals covering the whole range or rank normally encountered in metallurgical coke production in the UK. Fracture surfaces were created by tensile fracture during diametral compression. In all three surfaces examined, the appearance of components derived from reactive coal constituents varied with the rank of the coal carbonized. A clear similarity was evident between features visible in the etched and fracture surfaces. The marked variation of fracture features imply that the textural composition of the coke carbon may make some contribution, as yet unquantified, to the variation in strength among cokes.     

Nuclear magnetic proton relaxation studies of oxidized coals

Coals of NCB rank 301 a (coking), 502 (caking) and 802 (very weakly caking) are oxidized in air at 373 K or 383 K for up to 42 days. Spin-lattice and spin-spin relaxation times, T₁ and T₂ respectively, of oxidized coals are measured using a Bruker SXP 4–100 and FT spectrometer. Free radical concentrations in the coals are obtained using a JES PE e.s.r. spectrometer. Infrared spectra of oxidized coals are obtained and optical textures of cokes from fresh and oxidized coals are assessed by optical microscopy. For two coking coals, decreasing values of T₁, and increasing concentration of free radicals occurred with oxidation at 383 K to 16 and 28 days. Thereupon values of T₁, increased and free radical concentrations decreased with further progressive oxidation. At the point of inflexion in properties, resultant cokes from the coals ceased to shown any anisotropy in their optical textures and became isotropic resembling cokes from low-rank coals. For the caking coals, T₁ increased at all stages of oxidation to 42 days with decreasing concentrations of free radicals. Two values of T₂ were found in each coal corresponding to a rigid and mobile component ((T₂)_r < (T₂)_m). The rigid component (T₂)_r was not affected by oxidation but values of (T₂)_m decreased with increasing duration of oxidation. It is considered that coking and caking coals exhibit different effects of oxidation with perhaps phenols and quinones in caking coals acting as inhibitors to the growth of stable free radicals. Oxidized coking coal may behave like fresh caking coal.     

Carbonization and liquid-crystal (mesophase) development. 11. The co-carbonization of low-rank coals with modified petroleum pitches

Coals of rank ranging from medium quality coking to non-caking, non-fusible, have been co-carbonized with Ashland petroleum pitches A170, A240 and A200 as well as pitches modified by heat-treatment with aluminium chloride using A170, and by reductive hydrogenation of the A200. The mixing ratio was 7:3, the final HTT was 873 K, heating at 10 K min^?1 with a soak time of 1 h. The optical texture of the resultant cokes is assessed using polished surfaces and a polarized-light microscope using reflected light and a half-wave plate. The changes in optical texture are studied from the point of view of using coals of low rank in the making of metallurgical coke. The optical texture of resultant cokes is modified by co-carbonization and the mechanism involves a solution or solvolysis of the non-fusible coals followed by the formation of nematic liquid crystals and mesophase in the resultant plastic phase. The modified A170 pitch is more effective in modifying optical texture than the A170 because of an increase in molecular weight. The hydrogenated A200 is a very reactive additive probably because of an increased concentration of naphthenic hydrogen. The hydrogenated A200 can modify the optical texture of cokes from the organic inerts of coals and from oxidized, non-fusible coals.     

Composition of pore-wall material in metal-lurgical coke: Considerations of strength,gasification and thermal stress

The optical texture of metallurgical cokes consists of anisotropic carbon made up of mozaics, 0.5–10 μm in size of flow-type anisotropy, 10–60 μm in size, as well as inert and isotropic material. Cokes from different coal sources possess optical textures which are different, being composed of different extents of the above components. The study examines the optical texture of polished surfaces of cokes and relates changes in surface topography caused by gasification by carbon dioxide at 1173 K, by heat treatment to 2073 k and by etching with atomic oxygen at 293 k to the optical texture. The results support a model to explain the strength of coke and its resistance to breakage caused by gasification, mechanical and thermal stresses, in terms of the size, orientation and bonding of the varied components which constitute the composite structure of coke material.     

Gasification studies of cokes from coals. The effects of carbonization pressure on optical texture and porosity

Ten coals were carbonized under various pressures (4 kPa, normal pressure and 10 MPa). Optical textures and physical structures of resultant cokes were monitored. The extent of optical anisotropy increased greatly with increasing carbonization pressure, such a trend being more pronounced with the lower-rank coals. Physical structure was also influenced by carbonization pressure. Gasification reactivities of the cokes with carbon dioxide and steam (1200 °C) were studied with respect to their optical anisotropy and physical structure. Gasification reactivities of optical textures were estimated using both the point-counting technique and regression analysis. The reactivities of cokes with the same optical texture produced from the same parent coal were similar. However, there were considerable differences when compared with cokes from different parent coals. Although the values estimated by regression analyses are consistent with those obtained by point-counting, except for the leaflet and inert textures, the physical locations of respective textures can be important in quantitative discussions of their reactivities.     

Carbonizations under pressure of chloroformsoluble material of coking vitrinite

Chloroform-soluble material from a Polish coking coal was prepared by extracting the coal after heating it initially to 673 K for 15 min. The soluble material was carbonized in sealed gold tubes to 800 K and 873 K at 200 MPa pressure and to 800 K, 1000 K and 1200 K at atmospheric pressure. Coke morphology was assessed by SEM with optical texture (micro-texture) being assessed by polarizedlight microscopy of polished surfaces. Cokes from the pressure carbonizations (100 wt % yield) showed coalescing spherule morphology, 10 to 20 μm diameter, and are totally anisotropic. The material normally lost as volatiles thus contributes totally to the formation of mesophase and anisotropic coke. Coke from the carbonization of the soluble material at one atmospheric pressure (41 wt % yield) is composed mainly of anisotropic fine-grained mozaics in the range 1–5 μm. Carbonization under pressure extends the range of sizes of optical texture in cokes from this chloroform-soluble material. Applications may exist in graphite manufacture.     

The co-carbonization of oxidized coals with pitches and decacyclene

Coals of rank (NCB) 701, 401 and 204 were oxidized in air at 371 K for up to 15 days. The changes in optical texture of cokes from these coals were monitored by optical microscopy and point counting. The oxidized coals were cocarbonized to 1273 K with up to 30% of A240 petroleum pitch, a hydrogenated coal extract and decacyclene, and the resultant cokes were reassessed. The increase in isotropy in cokes caused by the oxidation treatment was never completely removed by use of the additives, but significant improvements existed for the less extensively oxidized coals. The possibility exists of using co-carbonization of oxidized coals with additives in coke making. Additives with good hydrogen donor ability, as with the coal extract, appear to be the most suitable.