Glass fiber-reinforced epoxy composites

Glass fiber-reinforced epoxy composites were prepared from the matrix resins tetraglycidyl diaminodiphenylmethane

1 Systematic name: N,N,N′,N′-Tetrakis(2,3-epoxypropyl)-4,4′-diaminodiphenylmethane.

(TGDDM) and tetraglycidyl bis(o-toluidino)-methane

2 Systematic name: N,N,N′,N′-Tetrakis(2,3-epoxypropyl)-4,4′-bis(o-toluidino)methane.

(TGMBT) using various amines like 4,4′-diaminodiphenylmethane (DDM), 4,4′-diaminodiphenylsulfone (DDS) and diethylene triamine (DETA) as curing agents. The fabricated laminates were evaluated for their mechanical and dielectrical properties and chemical resistance. The composites prepared using an epoxy fortifier (20 phr) showed significant improvement in the mechanical properties.     

Synthesis of phosphorus-containing polymers with potential bioactivity

Phosphorylation of poly(N-vinyl pyrrolidone-co-vinyl amine) and poly(N-vinyl pyrrolidone-co-glycidylcrotonate

1 Systematic name: (2,3-Epoxypropyl)crotonate.

) is realized by Atherton-Todd and Fields-Kabachnik reactions and by the means of direct interaction with phosphorus trichloride and phosphorus trichloride oxide. The composition and structure of the isolated final products was proved by NMR (¹H and ³¹P), IR spectroscopy and elemental analysis.     

Functional polyamides. 3. Synthesis and chelating properties of a new poly(amide thioether)

Polymerization of β,β′-(ethylenedithio)dipropionitrile

1 IUPAC name: 4,7-dithiadecane dinitrile.

with formaldehyde in the presence of sulfuric acid was carried out in order to permit the synthesis of polymides containing thioether groups. The obtained poly(amide thioether)s were characterized; they coordinate mercury (II) with a high degree of selectivity.     

Properties of standard materials for reflection

This article gives a short survey of some literature on the calibration, suitability, properties, and use of various materials which are used as standards of reflectance. The classical ultimate reference standard, smoked magnesium oxide, is discussed briefly, and information is given on the properties of materials presently used: BaSO₄, Russian opal glasses, ceramic tiles, and Halon.

1 Halon is a registered trade name of the Allied Chemical Corporation.

The suitability of these materials for use as transfer standards or working standards is discussed.     

Fracture behavior of coated/uncoated graphite-epoxy composites

The static delamination behavior of graphite/epoxy composite specimens subjected to mode I tensile opening (using UDCB

1 Uniform double cantilever beam.

specimens), and pure mode II shear loading (using ENF

2 End-notched flexural.

specimens) were studied. The graphite epoxy composites for the study were made from commercially treated fibers, with and without an electropolymerized interlayer. The mode I fracture energy (G_IC) was found to be significantly higher (more than 50 percent) for the coated fibers. However, this improvement was accompanied by a high reduction (more than 3 times) in the mode II fracture energy (G_IIC). This effect is apparently related to poor adhesion between the interlayer and the epoxy resin, which may be corrected by use of a “top layer” of appropriate composition to form chemical bonds between the phases. The fracture toughness (K_IC) of composites made with commercially treated fibers was also evaluated, using double side-notched specimens.     

Photochemical and thermal stability of amaranth (FD&C red no. 2) in aqueous media

The decomposition of the formerly

1 This dye was delisted by the U. S. Food and Drug Administration in 1976, and has not been legally used in the U. S. in foods, drugs, or cosmetics since that date.

used food and pharmaceutical dye amaranth (FD&C Red No. 2) in water was studied under a variety of conditions. A matter of some concern is that one of the decomposition products is α-naphthylamine, a known carcinogen.     

Porous bead aliphatic-aromatic methacrylate copolymers,I. Effect of polymerization conditions on porous structure formation of methyl methacrylate — di(methacryloyloxymethyl)naphthalene copolymers

The influence of inert porogenic mixture and monomer mixture composition and concentration on specific surface areas, pore size distribution, volumes of pores capable of capillary condensation of nitrogen and true density of copolymers were investigated for a new type of methacrylate monomer system: methyl methacrylate and di(methacryloyloxymethyl)naphthalene. The obtained copolymers exhibit similar character as it is typical for PPS

1 PPS = Porous by Precipitant and Solvent.

styrene-divinylbenzene resins.     

Styrene emulsion polymerization in the presence of a maleate-functional surfactant

Dodecylhemiester of maleic anhydride is a very good anionic stabilizer for the emulsion polymerization of styrene. Rather high solid contents may be produced. Up to about 70% of the surfactant can be grafted onto the surface of the particles. Upon floculation with calcium salt, only 3% of the surfactant is left in the washing water. © 1997 John Wiley & Sons, Inc.

1 This article is a US Government work and, as such, is in the public domain in the United States of America.

J Appl Polym Sci 65: 2289–2296, 1997     

Simultaneous fluorine elimination and alkylation of poly(tetrafluoroethylene)

PTFE (powder or foils) was defluorinated and derivatized in a one-step process by alkyl- and aryllithium in the presence of tetramethylethylenediamine

1 Systematic name: 1,2-Bis-[dimethylamino]ethane.

(TMEDA) as a catalyst. As evidenced by infrared (IR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and elemental analysis the C₄H₉-, C₈H₁₇-, C₁₂H₂₅- or phenyl groups were attached to a partly defluorinated macromolecular chain. Analogous reactions with dilithioaryl or dilithioalkyl agents presumably lead to crosslinking of the polymeric chains through alkyl or aryl groups. When the PTFE powder is treated with more concentrated RLi (>3 mol L^?1) at temperatures >150°C, the defluorination is almost quantitative even in the absence of the catalyst. The TMEDA-catalyzed reaction proceeds via elimination and nucleophilic addition. On the other hand, more concentrated RLi in the absence of the catalyst seems to react via a radical mechanism.     

Alumina trihydrate as a flame retardant filler for flexible vinyl compounds

In those flexible vinyl compounds which can accept fillers, alumina trihydrate can significantly improve flame resistance as measured by oxygen index

1 It should be appreciated that degrees of flammability as measured by small-scale tests such as oxygen index may in no way reflect the relative hazard of these same materials when involved in a fully developed fire.

. Over a range of plasticizer concentrations, the lower the concentration of burnable plasticizer, the greater the contribution of hydrate to flame retardancy. Combinations of alumina trihydrate with antimony oxide are especially effective for improving the flame resistance of flexible vinyl compounds.     

Ground State Complexes between 5-(4-Carboxyphenyl)-10,15,20-Tritolyl Porphyrin and Benzoquinones

The interactions of 5-(4-carboxyphenyl)-10,15,20-tritolyl porphyrin (TTPa)

1 Abbreviations: TTPa: 5-(4-carboxyphenyl)-10,15,20-tritolyl porphyrin; BQ: 1,4-benzoquinone; DQ: 2,3,5,6-tetramethyl 1,4-benzoquinone; CHLQ: 2,3,5,6-tetrachloro 1,4-benzoquinone; DMSO: dimethyl sulfoxide

with benzoquinones have been studied by spectrophotometry and steady state and transient fluorescent methods. TTPa forms a 1:1 molecular complex with 1,4-benzoquinone, 2,3,5,6-tetramethyl 1,4-benzoquinone and 2,3,5,6-tetrachloro 1,4-benzoquinone in dimethyl sulfoxide at room temperature. The equilibrium constants for the interaction of TTPa with the different quinones were evaluated.     

Gel permeation chromatography: Physical characterization and chromatographic properties of porasil

Porasil

1 Porasil is the Water Associates registered trademark for a powdered porous silica chromatographic substrate.

porous silica has been characterized by the methods of gas adsorption–desorption isotherms, mercury porosimetry, and electron microscopy. The pore structure has been shown to be quite heterogeneous, particularly at the surface of the particles. From the same sample of Porasil, columns were packed and calibrated in a gel permeation chromatograph. The availability of high molecular weight fractions of polystyrene allowed the exclusion limit of these materials to be determined for the first time. The heterogeneous pore structure did not seem to affect the effectiveness of these materials for macromolecular separation.     

Dicyclopentadienoxidation. II 5. Katalysierte Flüssigphasenoxidation von Dicyclopentadien

Dicyclopentadiene Oxidation. II. Catalyzed Liquid-Phase Oxidation of Dicyclopentadiene The liquid-phase oxidation of dicyclopentadiene 1 by molecular oxygen was studied in the presence of MoO₂(acac)₂

1 Acac- Acetylacetonat

as a typical epoxidation catalyst. The yield of the mono-epoxides 2 and 3 is increased to 56,4% (uncatalyzed reaction: 43,6%). The ratio of the two mono-epoxides is decreased to 2/3 = 2,6 in relation to the uncatalyzed reaction ( 2/3 = 7,1). The influence of temperature, conversion and solvents is described. The bisepoxide 4 is formed at lower conversions than in the uncatalyzed reaction. But also at higher conversions of 1 not more than 10% of the bisepoxide 4 is formed     

Dicyclopentadienoxidation. I,Unkatalysierte Flüssigphasenoxidation von Dicyclopentadien

Dicyclopentadiene Oxidation I. Uncatalyzed Liquid-Phase Oxidation of Dicyclopentadiene Dicyclopentadiene is oxidized by molecular oxygen to a mixture of the monoepoxides 2 and 3 . The identification of the epoxides 2 , 3 and 4 was executed with authentic samples prepared by epoxidation with peracetic acid or with tert-butylhydroperoxide in the presence of MoO₂(acac)₂

1 acac — Acetylacetonat

The main product is the substituted norbornene oxide 2 . Allylic oxidation is also observed. Remarkable amounts of hydroperoxides can be determined iodometrically. The formation of allylic oxidation products 7 , 8 , 9 and 10 was proved by GC-MS-analysis. It is shown that in the uncatalyzed liquid phase oxidation of dicyclopentadiene no more than 50% of epoxides are formed. The bisepoxide 4 was found in small amounts only at higher conversions of the dicyclopentadiene.     

Oxidative aging of thermoplastic polyimide films

Two linear polyimides were subjected to accelerated isothermal aging at temperatures between 300 and 400°C. Losses in toughness correlated well with changes in glass transition temperature (T_g) of the films, but not with weight loss. Both materials have extrapolated lifetimes of 100,000 h near their T_g's. © 1995 John Wiley & Sons, Inc.

1 This article is a US Government work and, as such, is in the public domain in the United States of America.

     

The hierarchical structure and flexure behavior of woven carbon fiber epoxy composite

The hierarchical structure and flexure behavior of woven carbon fibers epoxy composite were investigated in this work. First, the hierarchical structure of the composite is characterized on three levels: composite, ply, and yarn. Structura imperfections,

1 In this paper, “structural imperfections” is used to describe the inherent structural characteristics of the actual composite, which deviate from the theoretically ideal and perfect composites, control, that are used in composite theories.

such as, ply‐ply misalignment, ply‐ply offset, and resin pockets, are identified and described. Second, a four‐point bending arrangement is used to study the flexure properties of the composite. Additionally, in‐situ traveling microscope and acoustic emission (AE) techniques are utilized to gain insight to the failure proceses during flexure test. AE showed early stages of matrix cracking before visual observation, which makes it a valuable tool for early failure detection.     

Synthesis of phosphorus-containing wofatit cation exchangers and their affinity toward selected cations

A number of solid Cationits have been prepared derived from Wofatit

1 Trademark, VEB Chemiekombinat Bitterfield.

gel and canal structures: styrene/DVB, chloromethylated ST/DVB, and acrylic acid/DVB copolymers. To functionalize the copolymers, PCl₃/AlCl₃ and dialkyl phosphites or trialkyl phosphites were used. The influence of the polymer matrix structure and the chemical structure of the functional groups of obtained Ionits on their affinity toward 23 metallic cations in acidic media has been investigated using the conductivity method. To obtain comparison data, commercial “Wofatit”–sulfonic and–carboxylic Cationits, have been tested under identical conditions.     

A simple dilatometer for thermoset cure shrinkage and thermal expansion measurements

A simple capillary and bulb mercury dilatometer designed for specific volume measurements on thermoset resin systems during the curing reaction and as a function of temperature is described. The design, calibration, operation, data treatment, and error analysis are presented in detail, with data on the bisphenol A dicyanate resin system used as an example. Particular attention is directed at experimental difficulties such as monomer/prepolymer degassing, filling the dilatometer under vacuum, adhesive distortion of the curing resin on the dilatometer bulb, and the dilatometer bulb to capillary connection problem. © 1994 John Wiley & Sons, Inc.

1 This article is a US Government work and, as such, is in the public domain in the United States of America.

     

Grafting of methyl methacrylate on isoprene rubber

Methyl methacrylate has been grafted on artificial isoprene rubber (IR) latex, with use of redox initiation. The properties of latices containing up to 40 phr

1 Parts per hundred parts of rubber.

methyl methacrylate (MMA) as well as solid products containing up to 80 phr of this compound were studied. Compared with ungrafted IR latex with the same solids content, the grafted IR latices had a lower viscosity, owing to their particle size being larger. Vulcanised films obtained from the grafted latices showed a considerably higher modulus, particularly at large deformations, than those based on IR or blends of IR with polymethyl methacrylate. by incorporation of certain reinforcing white fillers in the MMA-grafted IR latices, a further increase in the modulus of the latex films was effected.     

Density of desublimed layers

Starting from the assumption that the growth of desublimed layers is governed mainly by heat and mass transfer, the authors present a model based on conditions in the diffusion boundary layer and suggest that the “hoarfrost”

1 Hereafter the term frost will be used instead of hoarfrost.

density depends on only one parameter. The discussion accounts for the process determining factors, i.e. the growth rate, mass transfer and gas concentration. The theoretical relationship is confirmed by the authors' own experiments on two systems and data from literature. The relationship can be established by a few laboratory experiments and permits the calculation of frost density and of associated variables, thus facilitating the optimization of desublimator design.