Dynamic–mechanical properties of modified poly(ethylene‐co‐vinyl acetate)

To study the relationship among relaxation peaks observed in dynamic mechanical experiments and the structure of poly(ethylene‐co‐vinyl acetate) (EVA), EVA copolymers with different substitution in the carbonyl group were synthesized. EVA was hydrolyzed to obtain poly (ethylene‐co‐vinyl alcohol) and was subsequently reacted with formic, hexanoic, and octanoic acids. The copolymers synthesized were characterized by infrared spectroscopy. Analysis of the DMA spectra of the copolymers showed that their relaxation behavior depends on the vinyl acetate concentration. The α‐ and β‐transitions were observed in EVA copolymers with 8 and 18 wt % of functional groups, and the relationship among relaxation process with the structure of polymer was investigated. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1371–1376, 2005     

Effect of dehydrochlorination of PVC on miscibility and phase separation of binary and ternary blends of poly(vinyl chloride), poly(ethylene-co-vinyl acetate) and poly(styrene-co-acrylonitrile)

The enhancement of miscibility at the lower critical solution temperature (LCST) of the blends poly(vinyl chloride)/poly(ethylene-co-vinyl acetate) (PVC/EVA), poly(vinyl chloride)/poly(styrene-co-acrylonitrile) (PVC/SAN) and poly(vinyl chloride)/poly(ethylene-co-vinyl acetate)/poly(styrene-co-acrylonitrile) (PVC/EVA/SAN) was observed at the micron level. Such miscibility is attributed to the dehydrochlorination and formation of hydrogen bonds between blend components. However, macrolevel immiscibility of these blends heated to the LCST was observed. Such microdomain compatibility of these blends gives a synergistic character. Brittle-type failure observed for LCST samples testifies to the synergism in treated blends. ©1997 SCI     

Polyblend fibers from polypropylene and mercapto-modified EVA

Polyblend fibers were made from mixtures of polypropylene (PP) and ethylene-vinyl acetate copolymers (EVA) or their mercapto-modified products [poly(ethylene-co-vinyl acetate-co-vinyl mercaptoacetate)] (EVASH). The presence of few EVA or EVASH in the PP fibers results in an increasing of the elastic modulus, indicating a reinforcing action of these functional polymers. The composition surface of the modified PP fibers was analyzed by X-ray photoelectron spectroscopy and diffuse reflectance infrared Fourier transform spectroscopy. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 66: 2243–2249, 1997     

Au/PANA/PVAc and Au/P(ANA-co-CNTA)/PVAc electrospun nanofibers as tyrosinase immobilization supports

Au/poly anthranilic acid/poly vinyl acetate and Au/poly(anthranilic acid-co-3-carboxy-N-(2-thenylidene)aniline)/poly vinyl acetate nanofibers through electrospinning and their modification with covalent tyrosinase (Ty) immobilization was performed. It was realized by surface activation using N-(3-dimetylaminopropyl)-N-ethylcarbodimide hydrochloride/N-hydroxysuccinimide chemistry. Electrochemical impedance spectroscopy (EIS), FTIR–ATR, Raman spectroscopy, and bicinchoninic acid assay analyses demonstrated that Ty was stably and covalently bonded onto the nanofibers. Increase in surface roughness [atomic force microscopy (AFM)] and the presence of Cu atoms in the nanofiber composition after enzyme immobilization confirmed the Ty immobilization. The charge transfer resistances of the nanofibers decreased due to changes in the nanofiber surfaces after attachment of enzyme.     

Preparation of hairy particles by grafting PEG onto the poly(styrene‐co‐maleic anhydride) surface and PEG effect on SiO2 nanoparticles adsorption

Hairy particles were prepared by immobilization of poly(ethylene glycol) (PEG) on the surface of poly(styrene‐co‐maleic anhydride) (poly(S‐co‐MA)) spheres. It was found that the carbonyl groups on the poly(S‐co‐MA) surface can be conveniently esterified with the hydroxyl groups of PEG. Chemical and morphological changes were analyzed by FT‐IR, TEM, and water contact angle. Results revealed that, with the immobilization of PEG, the morphology of poly(S‐co‐MA) turned from a smooth surface to a hairy‐like structure and the hydrophilicity of the polymer particles improved. In addition, berry‐like polymer/silica particles can be obtained by using the hairy particles as template. The PEG hairy chains show steric repulsion during the deposition of silica nanoparticles by in situ sol‐gel process. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Miscibility studies of polymer blends by viscometry methods

The intrinsic viscosities of blends of poly(vinyl chloride)/poly(ethylene-co-vinyl acetate) (PVC/EVA), poly(vinyl chloride)/poly(styrene-co-acrylonitrile) (PVC/SAN), and poly(ethylene-co-vinyl acetate)/poly(styrene-co-acrylonitrile) (EVA/SAN) have been studied in cyclohexanone as a function of blend composition. In order to predict the compatibility of polymer pairs in solution, the interaction parameter term, Δb, obtained from the modified Krigbaum and Wall theory, and the difference in the intrinsic viscosities of the polymer mixtures and the weight average intrinsic viscosities of the two polymer solutions taken separately are used. © 1994 John Wiley & Sons, Inc.     

Rheological,thermal, and mechanical properties of P (3HB‐co‐4HB) and P (3HB‐co‐4HB)/EVA blends

Poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) [P(3HB‐co‐4HB)] fiber and P(3HB‐co‐4HB)/EVA fiber were obtained by single screw extrusion machine. The rheology of P(3HB‐co‐4HB) and P(3HB‐co‐4HB)/EVA blends was characterized by capillary rheometer, and the chemical groups of the blends were characterized with Fourier transform infrared spectroscopy (FT‐IR). The crystallization behavior and thermal, mechanical and elastic properties of the fibers were measured by differential scanning calorimeter (DSC), thermogravimetric analyzer (TGA) and single fiber strength tester, respectively. Besides, the moisture regain and drying shrinkage rates of the fibers were tested. These results showed that P(3HB‐co‐4HB)/EVA blends have better flowability, crystallinity, and thermal stability than P(3HB‐co‐4HB) fiber. The fracture strength of the P(3HB‐co‐4HB)/EVA fiber decreases with increasing the EVA content, but the elongation at break shows the contrary tendency. The rebound resilience ratio of P(3HB‐co‐4HB)/EVA fiber reaches 100%. Both moisture regain and drying shrinkage increase first and then decrease with increasing the EVA content. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41206.     

Surface grafting of polyester fiber with chitosan and the antibacterial activity of pathogenic bacteria

Three polyesters—poly(ethylene terephthalate), poly(2‐methyl‐1,3‐propylene terephthalate‐co‐ethylene terephthalate), and poly(1,4‐cyclohexylene terephthalate‐co‐ethylene terephthalate)—were preirradiated with ⁶⁰Co‐γ‐rays. Then, acrylic acid and N‐vinylformamide were grafted to these irradiated fibers. Fibers grafted with N‐vinylformamide were further hydrolyzed with acid so that the amide groups would convert into amino groups, and they were treated with glutaraldehyde so that aldehyde groups would be introduced. Chitosan or chitooligosaccharide was then grafted to these fibers via either esterification or imine formation. Four pathogenic bacteria—methicillin‐resistant Staphylococcus aureus‐1 (MRSA), Staphylococcus aureus‐2, Escherichid coli, and Pseudomonas aeruginosa—were tested to determine the antibacterial activities of chitosan‐grafted and chitooligosaccharide‐grafted fibers. The results showed that grafting chitosan via imine formation could achieve a higher surface density for amino groups and give higher antibacterial activity to those four bacteria tested. The antibacterial activity for E. coli was the highest and that for MRSA was the lowest among the four bacteria tested. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2977–2983, 2002     

Anticorrosive properties of epoxy resin coatings cured by aniline/p‐phenylenediamine copolymer

Aniline/p‐phenylenediamine copolymer [poly(ANI‐co‐p‐PDA)] was prepared by chemical oxidative polymerization. FTIR and ¹H‐NMR analysis indicate that the poly(ANI‐co‐p‐PDA) is oligomer with end‐capped amino groups, which can cure epoxy resin. The anticorrosion performance of carbon steel (CS) samples coated by epoxy resin coating cured with poly(ANI‐co‐p‐PDA) and epoxy resin coating cured with triethylenetetramine exposed to 5 wt % NaCl and 0.1 mol/L HCl aqueous solution is studied by the potentiodynamic polarization and electrochemical impedance spectroscopy. The results show that the CS coated by epoxy resin coating cured with poly (ANI‐co‐p‐PDA) has more excellent corrosion protection than that of epoxy resin coating cured with triethylenetetramine. Raman spectroscopy analysis indicates that the surface of CS coated by epoxy resin coating cured with poly(ANI‐co‐p‐PDA) forms passive layer, which is composed of α‐Fe₂O₃. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Processability enhancement of poly(lactic acid-co-ethylene terephthalate) by blending with poly(ethylene-co-vinyl acetate), poly(3-hydroxybutyrate-co-3-hydroxyvalerate), and poly(butylene succinate)

Processability enhancement feasibility of an in-house synthesized poly(lactic acid-co-ethylene terephthalate), PLET, is investigated by blending with commercial poly(ethylene-co-vinyl acetate), EVA, poly(3-hydroxybutyrate-co-3-hydroxyvalerate), PHBV, and poly(butylene succinate), PBS. The three blend systems are prepared by varying PLET contents, and their properties are characterized. DSC, SEM, and FTIR results indicate that PLET/EVA blends are immiscible, while the corresponding PLET/PBS and PLET/PHBV blends are miscible and partially miscible, respectively. DMA results show that the three blend systems have storage modulus comparable to those of commercial EVA, PHBV, and PBS, when PLET content is kept lower than 50, 25, and 25 wt%, respectively. PLET/EVA blends show higher thermal stability, compared to those of the other two blend systems. Results on degradability tests indicate that PLET/PBS blends show highest hydrolytic degradability, compared to the other two blends, as both blend constituents are associated in the hydrolytic degradation.     

Fabrication of poly(PEGMA) surface with controllable thickness gradient and its mediation on the gradient adhesion of cells

The gradient surface shows enormous potential in the development of tissue engineering, biosensor, microfluidic control, and particle sorting. In this work, a poly(polyethyleneglycol methacrylate) (poly(PEGMA)) gradient surface was prepared through surface-initiated activators regenerated by electron transfer atom transfer radical polymerization (SI-AGRET ATRP). The effect of various parameters on the thickness growth of poly(PEGMA) film were analyzed, among which the excessive reducing agent was utmost important. The reducing agents supported the regeneration of Cu^I and eliminated the disturbance of air, maintaining the "living polymerization" of poly(PEGMA) up to 73.1 nm under tested conditions. The physicochemical properties of the fabricated surfaces were characterized by ellipsometry, X-ray photoelectron spectroscopy, water contact angle. The thickness slope of gradient poly(PEGMA) was controllable in a nanoscale range. The gradient surface was further grafted with CRGD (Cys-Arg-Gly-Asp) peptides onto the poly(PEGMA-co-[glycidyl methacrylate]) blocks via the ring-opening reaction between epoxy and amino groups, which showed a gradient change in water contact angle and adhesion of endothelial cells.     

UV and corrosion protective behavior of polymer hybrid coating on mild steel

Poly[(pyridine‐4‐yl‐methyl)methacrylate‐co‐butyl methacrylate] [poly(PyMMA‐co‐BMA)] and its ZnO nanocomposites [poly(PyMMA‐co‐BMA)/ZnO] were coated on the mild steel substrate (MS) to improve the corrosion resistance by blocking the destructive ultraviolet radiation (UV‐radiation) and corrosive ions as well. The optical and anticorrosive properties of poly(PyMMA‐co‐BMA) and poly(PyMMA‐co‐BMA)/ZnO (1.0, 1.5, and 2.5 wt %) coatings were evaluated. The surface characterization techniques like UV visible spectroscopy and scanning electron microscope were taken to confirm the formation of poly(PyMMA‐co‐BMA) and poly(PyMMA‐co‐BMA)/ZnO (2.5 wt %) coating on MS. The optical studies revealed that the poly(PyMMA‐co‐BMA)/ZnO (2.5 wt %) coating displays excellent UV blocking properties than other nanocomposite coatings (1.0 and 1.5 wt %). The potentiodynamic polarization and electrochemical impedance spectroscopy studies show that the poly(PyMMA‐co‐BMA) and poly(PyMMA‐co‐BMA)/ZnO (1.0, 1.5, and 2.5 wt %) coated MS in 3.5% (w/v) NaCl provides better protection against corrosion. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46175.     

Synthesis of an acrylate elastomer with UV stabilization and its application in polyoxymethylene

In this study, an acrylate elastomer with light‐stable functional groups was synthesized by methyl methacrylate (MMA), butyl acrylate (BA), and a polymerizable UV stabilizer 2‐hydroxy‐4‐(3‐methacryloxy‐2‐hydroxylproroxy) benzophenone (BPMA) via emulsion polymerization, and the product was poly[methyl methacrylate‐co‐butyl acrylate‐co‐2‐hydroxy‐4‐(3‐methacryloxy‐2‐hydroxylproroxy) benzophenone] [poly(MMA‐co‐BA‐co‐BPMA)]. The composition and characteristics of poly (MMA‐co‐BA‐co‐BPMA) were determined by using Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance (¹H‐NMR), and ultraviolet–visible absorption spectroscopy (UV–vis). Further, the obtained poly(MMA‐co‐BA‐co‐BPMA) was blended with polyoxymethylene (POM) to modify its photostabilization, as well as the mechanical properties of POM composite were tested before and after UV irradiation. The result showed that poly(MMA‐co‐BA‐co‐BPMA) can be dispersed well in the POM matrix, which could play a role of improving compatibility with and toughening for POM, and its light‐stable functional groups could increase the UV resistance of POM composite. Mechanical properties of modified POM were kept well with higher impact strength and elongation at break than pure POM after UV irradiation. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Hydrophilic modification of P(VDF-co-CTFE) porous membranes

This paper describes fabrication of a poly(vinylidene difluoride-co-chlorotrifluoroethylene) (P(VDF-co-CTFE)) porous membrane via non-solvent induced phase inversion and subsequent hydrophilic modification using high efficient surface initiated atom transfer radical polymerization (ATRP). The effect of viscosities of casting solutions on microstructures of the P(VDF-co-CTFE) membrane was investigated. The surface chemistry, thermal stability, morphological structure, and hydrophilicity of the modified membranes were evaluated by Fourier Transform Infrared Attenuated Total Reflection (FTIR-ATR), Differential Scanning Calorimeter (DSC), Scanning Electron Microscope (SEM), and contact angle measurements, respectively. The degree of grafting and the degree of swelling were measured to analyze the effect of polymerization time on the wettability. The mechanical strength of the membranes after modification was also investigated. The permeability and fouling resistance were evaluated according to pure water flux and protein solution filtration measurements. The results demonstrate that the hydrophobic P(VDF-co-CTFE) membrane can be feasibly modified by immobilization of hydrophilic poly(ethylene glycol) methyl ether methacrylate (PEGMA) brushes via surface initiated ATRP.     

Syntheses,characterization, and antibacterial activity of chitosan grafted hydrogels and associated mica‐containing nanocomposite hydrogels

Chitosan (CS) grafted poly[(acrylic acid)‐co‐(2‐hydroxyethyl methacrylate)] (CS‐g‐poly(AA‐co‐HEMA)) at different molar ratios of AA and HEMA, and the associated nanocomposite hydrogels of CS‐g‐poly(AA‐co‐HEMA)/mica were synthesized by radical copolymerization. The grafting positions at the amino or hydroxyl groups in the CS were identified by Fourier transform infrared spectroscopy. CS‐g‐poly(AA‐co‐HEMA) hydrogels were intercalated in the mica and the amount of hydrogel insertion did not affect the spacing of the silicate layers in mica. The higher mica loadings produced a rougher surface of the nanocomposite hydrogel. The water absorbency of the CS‐g‐poly(AA‐co‐HEMA)/mica nanocomposite hydrogels decreased with increasing levels of mica loading to a lower level than those of the CS‐g‐poly(AA‐co‐HEMA) hydrogels. Both CS‐g‐poly(AA) and CS‐g‐poly(AA‐co‐HEMA)/mica nanocomposite hydrogels exhibited a higher antiproliferative activity against Staphylococcus aureus than did the neat CS hydrogel with CS‐g‐poly(AA) revealing a very pronounced minimum inhibition concentration (MIC) of 1.56 mg mL^?1. The extent of mica loading in the CS‐g‐poly(AA‐co‐HEMA) nanocomposite hydrogels did not affect the MIC (12.5 mg mL^?1). © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Graft copolymers from modified ethylene–vinyl acetate (EVA) copolymer. I. Synthesis of poly(ethylene-co-vinyl acetate-g-styrene) using EVA modified by mercaptoacetic acid as chain transfer agent

The modification of the poly(ethylene-co-vinyl acetate) (EVA) by direct esterification of its ethylene—vinyl alcohol copolymer with mercaptoacetic acid was carried out. The amount of the mercaptan group was controlled to avoid gel formation during the graft polymerization with styrene by chain transfer. The chain transfer constant (Cs) of the SH groups and graft efficiency were measured. These graft copolymers were evaluated as a blend compatibilizer. © 1993 John Wiley & Sons, Inc.     

Studies on polymer blends with moderate specific interactions. 2. phase structure of blends SAN/TPU and SAN/TPU/EVA

This paper deals with morphological studies of binary and ternary blends composed of poly(styrene-co-acrylonitrile) (SAN), polyurethane elastomer (TPU) and poly(ethylene-co-vinyl acetate) (EVA). Selective etching was found necessary to expose the morphologies of the blends. Chloroform or hot acetone, hexane/toluene (2/1v/v) and NaOH/CH₃OH (1wt%) were found to be selective etching agents for SAN, EVA and TPU, respectively. SAN and TPU form blends with fine dispersion structure, while SAN and EVA lead to rough phase structure with poor phase adhesion. These results are in accordance with the difference in the mechanical properties of SAN/TPU and SAN/EVA. In addition, for SAN/TPU/EVA blends, if TPU is only a minor component, it is preferentially located at the interphase, playing the role of a compatibilizer. As the amount of TPU increases, the compatibility is gradually improved. ©1997 SCI     

Gloss reduction and morphological properties of polycarbonate and poly(methyl methacrylate‐acrylonitrile‐butadiene‐styrene) blends with SAN‐co‐GMA as a reactive compatibilizer

The gloss properties of the polycarbonate (PC)/poly(methyl methacrylate‐acrylonitrile‐butadiene‐styrene) (MABS) blend with styrene‐acrylonitrile‐co‐glycidyl methacrylate (SAN‐co‐GMA) as a compatibilizing agent were investigated. For the PC/poly(MABS)/SAN‐co‐GMA (65/15/20, wt %) blend surface, the reduction of gloss level was observed most significantly when the GMA content was 0.1 wt %, compared with the blends with 0.05 wt % GMA or without GMA content. The gloss level of the PC/poly(MABS)/SAN‐co‐GMA (0.1 wt % GMA) blend surface was observed to be 35, which showed 65% lower than the PC/poly(MABS)/SAN‐co‐GMA blend without GMA content. The gloss reduction was most probably caused by the insoluble fractions of the PC/poly(MABS)/SAN‐co‐GMA blend that were formed by the reaction between the carboxylic acid group in poly(MABS) and epoxy group in SAN‐co‐GMA. The results of optical and transmission electron microscope analysis, spectroscopy study, and rheological properties supported the formation of insoluble structure of the PC/poly(MABS)/SAN‐co‐GMA blend when the GMA content was 0.1 wt %. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46450.     

Production of polymeric membranes made of polypropylene,poly(ethylene‐co‐vinyl acetate), and poly(vinyl alcohol)

In this study, we prepared and characterized membranes containing polypropylene, poly(ethylene‐co‐vinyl acetate) (EVA), and poly(vinyl alcohol) (PVA). The production process involved blend extrusion and calendering followed by solvent extraction by toluene and water of the EVA and PVA phases. Morphology studies involving scanning electron microscopy determined the pore size distribution at the surface and in the internal regions of the membrane. The resulting membrane properties were related to the processing variables (extension rate, process temperature, and solvent extraction methods) and blend composition. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3275–3286, 2004     

Multilayer composite surfaces prepared by an electrostatic self‐assembly technique with quaternary ammonium salt and poly(acrylic acid) on poly(acrylonitrile‐co‐acrylic acid) membranes

An electrostatic self‐assembly technique was applied to prepare ion complex polymer layers on polyacrylonitrile with acrylic acid segments {poly(acrylonitrile‐co‐acrylic acid) [P(AN‐co‐AA)]}. For the ionic complex layers, quaternary ammonium salts, such as cetyl trimethyl ammonium chloride (CTAC) and tetramethyl ammonium chloride (TMAC), were used as cationic species, and also, poly(acrylic acid) (PAA) was used as an anionic species. These cationic and anionic species were self‐assembled alternately on the surface of the P(AN‐co‐AA) membrane. Fourier transform infrared spectroscopy, AFM, and water contact angle measurements of the membrane surface were used to confirm the formation of the multilayer composites on the P(AN‐co‐AA). The permeabilities of water and macromolecules of different molecular weights were evaluated by a membrane filtration technique. The values of permeability strongly depended on the formation layer by layer of these ion composites on the base P(AN‐co‐AA). Through the measurement of the values of the contact angle of water, it was clear that surface nature of the base membrane treated by CTAC or TMAC and PAA dramatically changed. We concluded that such an electrostatic self‐assembly technique is useful for the preparation of multicomposite layers to modify the surface of base P(AN‐co‐AA) membranes. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008