共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
3.
渐开线非圆齿轮的齿廓曲线数学模型 总被引:18,自引:2,他引:18
对于给定的非圆齿轮节曲线,借助于共轭齿条建立齿廓曲线的数学模型。根据渐开线齿轮齿廓成形原理,当共轭齿条分度线在非圆齿轮节曲线上作纯滚动,齿条的齿廓便在齿轮上包络出齿轮的齿廓。因此,首先建立了共轭齿条的数学模型和节曲线纯滚动模型,而后用啮合方程将这两个模型结合起来,经坐标变换后便在齿轮坐标系中获得了非圆齿轮齿廓曲线的数学模型。进一步用计算机图形仿真的方法获得椭圆齿轮的渐开线齿廓曲线图形,验证了该模型的正确性和有效性。该模型为非圆齿轮的加工刀具设计、数控加工程序设计以及轮齿强度分析等提供了基础。 相似文献
4.
定义了非圆齿轮的啮合角函数 ,由此 ,建立了非圆齿轮齿廓方程 ,并导出非圆齿轮齿廓曲率半径、齿廓弧长和滑动系数计算公式 ;提出了齿廓根切的条件。啮合角函数决定了非圆齿轮齿廓形状及其几何特性 ,由啮合角函数可直接求解共轭齿廓 ;无需先给定齿廓曲线 ,即可由啮合角函数系统地对齿廓几何特性进行分析。该共轭齿廓的直接求解及几何特性研究甚为简便。 相似文献
5.
6.
利用非圆齿轮行星系或圆齿轮差动机构和非圆齿轮机构的配合,可以再现一定种类的非单调函数.本文选取极角和极径变量作为参数来构造设计非圆齿轮节曲线,利用MATLAB软件,给定一种再现函数,绘出其节曲线和传动比函数曲线,可以很好的分析是否满足要求的变传动比. 相似文献
7.
8.
9.
10.
11.
12.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
13.
三爪自定心卡盘作为机床的主要附件,已有一百多年的发展历史,尽管目前随着数控技术的不断发展,越来越多地需求高速动力卡盘,但三爪自定心卡盘目前仍有一定的市场。 要保证卡盘可靠地夹紧工件,必须使其有可靠的夹持精度;要保持卡盘的精度,必须要严格控制各零部件公差及误差,如盘丝的极心偏。 极心偏是形成圆的渐开线的基圆圆心 (极心 )与盘丝内孔中心不同心所造成的偏差值。它对卡盘精度的影响分两种情况,一是卡爪夹持弧采用配磨,二是卡爪夹持弧采用单磨。本文主要探讨配磨时的影响。 卡爪夹持弧采用配磨,即每台卡盘整体… 相似文献
14.
详细分析了圆柱面素线的直线度公差带在新旧标准中定义和解释的区别,并从对圆柱面素线实际要素检测的角度,提出了推行新标准的实际意义。 相似文献
15.
16.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
17.
根据广州市珠江新城旅客自动运输系统(APM)列车的运行特点,介绍APM列车制动系统的制动方式及其特点,分析APM列车动态制动和摩擦制动的工作机理及其区别和联系,阐明APM列车制动系统的电控制过程和气控制过程,从而为APM列车制动系统的维护和管理提供一定的依据. 相似文献
18.
我公司于80年代末引进Aspera公司年产80万台冰箱(冷柜)压缩机生产线及软件技术,在压缩机加工中,活塞销孔(如图1所示)的加工是难点之一。用镗床加工,质量一直难以达到要求,废品率很高。后来我们将Aspera公司的加工工艺即精镗后滚光改为精镗后用金刚石铰刀粗、精铰孔,由此解决了这个技术难题。(1)原意大利Aspera公司工艺简述其工艺流程为:钻6.5通孔→扩孔至7+0.1→粗镗7.473+0.036、圆柱度0.01→精镗至7.935+0.006、圆柱度0.002→滚光7.938+0.006、圆柱度0… 相似文献
19.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
20.
The article presents a brief review of the wear models based on the kinetic thermofluctuation approach. The materials were developed using SamGTU sclerometric programming software and a set of instruments developed at Samara Engineering University for assessing the parameters of kinetic thermoactivation for surface fracture deformed by friction. The first obtained results of assessments and the estimated prediction of wear resistance exemplified by tribocouple of the aircraft chassis are presented. 相似文献