共查询到20条相似文献,搜索用时 93 毫秒
1.
2.
调速型液力偶合器勺管是用于调节工作机的转速,着从介绍了容积调速下液力偶合器中勺管的设计方法,对于勺管的设计具有一定的借鉴作用。 相似文献
3.
为获得节流调速系统在不同工作状态下的瞬态特性,对进油、回油节流阀节流调速系统进行了数字与实验研究。建立了系统流体流动和各部件受力相互作用的动力学模型,仿真分析了系统参数--节流阀通流截面积At、负载F和油液体积弹性模量E对节流调速系统的动态特性影响;讨论了进油、回油节流阀节流调速系统的动态响应特性;通过试验验证了所设计的动力学模型的正确性。其研究方法可为设计液压系统时选择调速系统参数提供借鉴和参考。 相似文献
4.
5.
用节流阀和调速阀的进油节流调速回路速度-负载特性研究 总被引:1,自引:1,他引:0
通过实验,对分别采用节流阀和调速阀的进油节流调速回路的速度负载特性进行了研究,并做出了速度负载特性曲线,得出了采用调速阀的进油节流调速回路的适用条件,对正确对待和使用这两种调速方式提供了参考。 相似文献
6.
7.
8.
9.
10.
论述了硅油风扇离合器的工作原理,分析了影响其性能的主要因素。对影响其调速性能的排油机构进行了探讨,构建了排油压力方程。针对某型硅油风扇离合器的设计参数,设计产品样品,并对其进行台架试验,给出了转速特性曲线及温度特性曲线。 相似文献
11.
12.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
13.
三爪自定心卡盘作为机床的主要附件,已有一百多年的发展历史,尽管目前随着数控技术的不断发展,越来越多地需求高速动力卡盘,但三爪自定心卡盘目前仍有一定的市场。 要保证卡盘可靠地夹紧工件,必须使其有可靠的夹持精度;要保持卡盘的精度,必须要严格控制各零部件公差及误差,如盘丝的极心偏。 极心偏是形成圆的渐开线的基圆圆心 (极心 )与盘丝内孔中心不同心所造成的偏差值。它对卡盘精度的影响分两种情况,一是卡爪夹持弧采用配磨,二是卡爪夹持弧采用单磨。本文主要探讨配磨时的影响。 卡爪夹持弧采用配磨,即每台卡盘整体… 相似文献
14.
15.
详细分析了圆柱面素线的直线度公差带在新旧标准中定义和解释的区别,并从对圆柱面素线实际要素检测的角度,提出了推行新标准的实际意义。 相似文献
16.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
17.
根据广州市珠江新城旅客自动运输系统(APM)列车的运行特点,介绍APM列车制动系统的制动方式及其特点,分析APM列车动态制动和摩擦制动的工作机理及其区别和联系,阐明APM列车制动系统的电控制过程和气控制过程,从而为APM列车制动系统的维护和管理提供一定的依据. 相似文献
18.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
19.
我公司于80年代末引进Aspera公司年产80万台冰箱(冷柜)压缩机生产线及软件技术,在压缩机加工中,活塞销孔(如图1所示)的加工是难点之一。用镗床加工,质量一直难以达到要求,废品率很高。后来我们将Aspera公司的加工工艺即精镗后滚光改为精镗后用金刚石铰刀粗、精铰孔,由此解决了这个技术难题。(1)原意大利Aspera公司工艺简述其工艺流程为:钻6.5通孔→扩孔至7+0.1→粗镗7.473+0.036、圆柱度0.01→精镗至7.935+0.006、圆柱度0.002→滚光7.938+0.006、圆柱度0… 相似文献
20.
对多级离心泵噪声检测的不确定度进行了评定,涉及不确定度的来源及分析,A类、B类标准不确定度的评定,合成标准不确定度的评定,以及扩展不确定度的评定和噪声检测结果的报告等. 相似文献