Adsorption of reactive dyes from aqueous solutions by fly ash: kinetic and equilibrium studies

Adsorption kinetic and equilibrium studies of three reactive dyes namely, Remazol Brillant Blue (RB), Remazol Red 133 (RR) and Rifacion Yellow HED (RY) from aqueous solutions at various initial dye concentration (100–500 mg/l), pH (2–8), particle size (45–112.5 μm) and temperature (293–323 K) on fly ash (FA) were studied in a batch mode operation. The adsorbent was characterized with using several methods such as SEM, XRD and FTIR. Adsorption of RB reactive dye was found to be pH dependent but both RR and RY reactive dyes were not. The result showed that the amount adsorbed of the reactive dyes increased with increasing initial dye concentration and contact time. Batch kinetic data from experimental investigations on the removal of reactive dyes from aqueous solutions using FA have been well described by external mass transfer and intraparticle diffusion models. It was found that external mass transfer and intraparticle diffusion had rate limiting affects on the removal process. This was attributed to the relatively simple macropore structure of FA particles. The adsorption data fitted well with Langmuir and Freundlich isotherm models. The optimum conditions for removal of the reactive dyes were 100 mg/l initial dye concentration, 0.6 g/100 ml adsorbent dose, temperature of 293 K, 45 μm particle size, pH 6 and agitation speed of 250 rpm, respectively. The values of Langmuir and Freundlich constants were found to increase with increasing temperature in the range 135–180 and 15–34 mg/g for RB, 47–86 and 1.9–3.7 mg/g for RR and 37–61 and 3.0–3.6 mg/g for RY reactive dyes, respectively. Different thermodynamic parameters viz., changes in standard free energy, enthalpy and entropy were evaluated and it was found that the reaction was spontaneous and endothermic in nature.     

Error analysis of equilibrium studies for the almond shell activated carbon adsorption of Cr(VI) from aqueous solutions

In this study, the preparation of activated carbon from almond shell with H2SO4 activation and its ability to remove toxic hexavalent chromium from aqueous solutions are reported. The influences of several operating parameters such as pH, particle size and temperature on the adsorption capacity were investigated. Adsorption of Cr(VI) is found to be highly pH, particle size and temperature dependent. Four adsorption isotherm models namely, Langmuir, Freundlich, Tempkin and Dubinin-Radushkevich were used to analyze the equilibrium data. The Langmuir isotherm provided the best correlation for Cr(VI) onto the almond shell activated carbon (ASC). Adsorption capacity was calculated from the Langmuir isotherm as 190.3 mg/g at 323 K. Thermodynamic parameters were evaluated and the adsorption was endothermic showing monolayer adsorption of Cr(VI). Five error functions were used to treat the equilibrium data using non-linear optimization techniques for evaluating the fit of the isotherm equations. The highest correlation for the isotherm equations in this system was obtained for the Freundlich isotherm. ASC is found to be inexpensive and effective adsorbent for removal of Cr(VI) from aqueous solutions.     

A comparison of basic dye adsorption onto zeolitic materials synthesized from fly ash

This investigation reveals the adsorption characteristics of two basic dyes, thionine (TH) and safranine T (ST), onto fly ash (FA) and its three zeolitized products prepared at different hydrothermal conditions. Typical two-step isotherms were observed for TH adsorption onto four adsorbents, whereas the isotherms of the larger ST molecules were S-shaped. The adsorption capacities of the zeolitized fly ash (ZFA) estimated from the first plateau region of the TH isotherms was nearly twice the FA capacity. The capacities increased by up to five times in the second plateau region. The adsorption capacity of FA for ST is equivalent that of TH, whereas the capacities of ZFA are lower than those found for TH. The equilibrium results were well-described by the Freundlich isotherm model. The kinetic data obtained in the temperature range of 298-318 K was analyzed using Paterson's and Nernst Plank's approximations based on the homogeneous surface diffusion model (HSDM). The thermodynamic functions for the transition state were evaluated from the temperature-dependence of the surface diffusion coefficients by applying the Eyring model.     

Elucidation of the naproxen sodium adsorption onto activated carbon prepared from waste apricot: kinetic, equilibrium and thermodynamic characterization

In this study, activated carbon (WA11Zn5) was prepared from waste apricot, which is waste in apricot plants in Malatya, by chemical activation with ZnCl(2). BET surface area of activated carbon is determined as 1060 m(2)/g. The ability of WA11Zn5, to remove naproxen sodium from effluent solutions by adsorption has been studied. Equilibrium isotherms for the adsorption of naproxen sodium on activated carbon were measured experimentally. Results were analyzed by the Langmiur, Freundlich equation using linearized correlation coefficient at 298 K. The characteristic parameters for each isotherm have been determined. Langmiur equation is found to best represent the equilibrium data for naproxen sodium-WA11Zn5 systems. The monolayer adsorption capacity of WA11Zn5 for naproxen sodium was found to be 106.38 mg/g at 298 K. The process was favorable and spontaneous. The kinetics of adsorption of naproxen sodium have been discussed using three kinetic models, i.e., the pseudo first-order model, the pseudo second-order model, the intraparticle diffusion model. Kinetic parameters and correlation coefficients were determined. It was shown that the pseudo second-order kinetic equation could describe the adsorption kinetics for naproxen sodium onto WA11Zn5. The thermodynamic parameters, such as DeltaG degrees , DeltaS degrees and DeltaH degrees, were calculated. The thermodynamics of naproxen sodium-WA11Zn5 system indicates endothermic process.     

Kinetic and equilibrium studies on the removal of acid dyes from aqueous solutions by adsorption onto activated carbon cloth

Removal of acid dyes Acid Blue 45, Acid Blue 92, Acid Blue 120 and Acid Blue 129 from aqueous solutions by adsorption onto high area activated carbon cloth (ACC) was investigated. Kinetics of adsorption was followed by in situ UV-spectroscopy and the data were treated according to pseudo-first-order, pseudo-second-order and intraparticle diffusion models. It was found that the adsorption process of these dyes onto ACC follows the pseudo-second-order model. Adsorption isotherms were derived at 25 degrees C on the basis of batch analysis. Isotherm data were treated according to Langmuir and Freundlich models. The fits of experimental data to these equations were examined.     

Adsorption of basic dye on high-surface-area activated carbon prepared from coconut husk: equilibrium, kinetic and thermodynamic studies

Adsorption isotherm and kinetics of methylene blue on activated carbon prepared from coconut husk were determined from batch tests. The effects of contact time (1-30 h), initial dye concentration (50-500 mg/l) and solution temperature (30-50 degrees C) were investigated. Equilibrium data were fitted to Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherm models. The equilibrium data were best represented by Langmuir isotherm model, showing maximum monolayer adsorption capacity of 434.78 mg/g. The kinetic data were fitted to pseudo-first-order, pseudo-second-order and intraparticle diffusion models, and was found to follow closely the pseudo-second-order kinetic model. Thermodynamic parameters such as standard enthalpy (DeltaH degrees), standard entropy (DeltaS degrees) and standard free energy (DeltaG degrees) were evaluated. The adsorption interaction was found to be exothermic in nature. Coconut husk-based activated carbon was shown to be a promising adsorbent for removal of methylene blue from aqueous solutions.     

Removal of phenol from aqueous solutions by adsorption onto activated carbon prepared from biomass material

Activated carbon derived from rattan sawdust (ACR) was evaluated for its ability to remove phenol from an aqueous solution in a batch process. Equilibrium studies were conducted in the range of 25–200 mg/L initial phenol concentrations, 3–10 solution pH and at temperature of 30 °C. The experimental data were analyzed by the Langmuir, Freundlich, Temkin and Dubinin–Radushkevich isotherm models. Equilibrium data fitted well to the Langmuir model with a maximum adsorption capacity of 149.25 mg/g. The dimensionless separation factor R_L revealed the favorable nature of the isotherm of the phenol-activated carbon system. The pseudo-second-order kinetic model best described the adsorption process. The results proved that the prepared activated carbon was an effective adsorbent for removal of phenol from aqueous solution.     

Equilibrium and kinetic studies on free cyanide adsorption from aqueous solution by activated carbon

Adsorption equilibrium and kinetics of free cyanide onto activated carbon were investigated in the batch tests, and the effects of contact time (1–72 h) and initial cyanide concentrations in the range of 102–532 mg/L were studied. Linear regression was used to determine the best fit of equilibrium and kinetics expressions. The two-parameter models including Freundlich, Dubinin–Radushkevich, Temkin and four different linearized forms of Langmuir and three-parameter models including Redlich–Peterson and Koble–Corrigan were employed for fitting the equilibrium data and it was found that, three-parameter models fitted the data better than the two-parameter models and among the three-parameter models the equilibrium data are best represented by Koble–Corrigan model. A number of kinetic models including fractional power, zero order, first order, pseudo-first order, Elovich, second order, intraparticle diffusion and four different linearized forms of pseudo-second order models were tested to fit the kinetic data. The latter was found to be consistent with the data. Intraparticle diffusion plots show that the adsorption process of free cyanide is a two steps process. In the first step, the adsorption of cyanide is fast while in the second step, cyanide adsorption slows down.     

Pyridine sorption from aqueous solution by rice husk ash (RHA) and granular activated carbon (GAC): parametric, kinetic, equilibrium and thermodynamic aspects

The present study deals with the adsorption of pyridine (Py) from synthetic aqueous solutions by rice husk ash (RHA) and commercial grade granular activated carbon (GAC) and reports on the kinetic, equilibrium and thermodynamic aspects of Py sorption. Batch sorption studies were carried out to evaluate the effect of various parameters, such as adsorbent dose (m), initial pH (pH0), contact time (t), initial concentration (C0) and temperature (T) on the removal of Py. The maximum removal of Py is found to be approximately 96% and approximately 97% at lower concentrations (<50 mg dm(-3)) and approximately 79.5% and approximately 84% at higher concentrations (600 mg dm(-3)) using 50 kg m(-3) and 30 kg m(-3) of RHA and GAC dosage, respectively, at 30+/-1 degrees C. Adsorption of Py is found to be endothermic in nature and the equilibrium data can be adequately represented by Toth and Redlich-Peterson isotherm equations. Py can be recovered from the spent adsorbents by using acidic water and 0.1 N H2SO4. The overall adsorption of Py on RHA and GAC is found to be in the order of GAC>RHA. Comparative assessment of adsorbents used by various investigators available in literature showed the effectiveness of BFA and RHA over other adsorbents. Spent RHA can simply be filtered, dried and used in the boiler furnaces/incinerators. Thus, its heating value can be recovered.     

Kinetics and equilibrium studies for the adsorption of Acid Red 57 from aqueous solutions onto calcined-alunite

The adsorption of Acid Red 57 (AR57) onto calcined-alunite was examined in aqueous solution in a batch system with respect to contact time, pH and temperature. The first-order, pseudo-second-order kinetic and the intraparticle diffusion models were used to describe the kinetic data and the rate constants were evaluated. The experimental data fitted very well the pseudo-second-order kinetic model and also followed the intraparticle diffusion model up to 90 min. The Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms and the isotherm constants were also determined. The equilibrium data are successfully fitted to the Langmuir adsorption isotherm. The Langmuir isotherm constant, K(L), was used to evaluate the changes of free energy, enthalpy and entropy of adsorption for the adsorption of AR57 onto calcined-alunite. The results indicate that calcined-alunite could be employed as low-cost material for the removal of acid dyes from textile effluents.     

Adsorption of p-nitrophenol from aqueous solutions onto activated carbon fiber

The adsorption of p-nitrophenol (PNP) onto activated carbon fiber (ACF) was investigated in simulated wastewater in a batch system to evaluate the effects of solution pH, presence of sodium chloride, adsorbent doses and temperature. It was found that PNP adsorption amount depended on pH, sodium chloride content, adsorbent doses and temperature. Langmuir and Freundlich models were applied to describe the adsorption isotherms. Freundlich model agreed with experimental data well, indicating the possibility of more than just one monomolecular layer of coverage. SEM photographs of ACF before and after adsorption revealed that it was in part with multimolecular layers of coverage on ACF surfaces. The change of free energy, enthalpy, and entropy of adsorption were also evaluated for the adsorption process. The pseudo-first-order and pseudo-second-order kinetic models were used to describe the kinetic data. The experimental data fitted very well the pseudo-second-order kinetic model. Attempts were made to desorb PNP from ACF using dilute NaOH solution and water, and desorption efficiency was obtained to the extent of 92.7% with 0.025 M NaOH and water at 368 K.     

Kinetic and equilibrium studies in removing lead ions from aqueous solutions by natural sepiolite

The capacity of sepiolite for the removal of lead ions from aqueous solution was investigated under different experimental conditions. The Langmuir and Freundlich equations, which are in common use for describing sorption equilibrium for wastewater-treatment applications, were applied to data. The constants and correlation coefficients of these isotherm models for the present system at different conditions such as pH, temperature and particle size were calculated and compared. The equilibrium process was well described by the Langmuir isotherm model and the maximum sorption capacity was found to be 93.4 mg/g for the optimal experimental condition. The thermodynamic parameters (DeltaG(o), DeltaH(o) and DeltaS(o)) for lead sorption on the sepiolite were also determined from the temperature dependence. The influences of specific parameters such as the agitation speed, particle size and initial concentration for the kinetic studies were also examined. The sorption kinetics were tested for first order reversible, pseudo-first order and pseudo-second order reaction and the rate constants of kinetic models were calculated. The best correlation coefficients were obtained using the pseudo-second order kinetic model, indicating that lead uptake process followed the pseudo-second order rate expression.     

Adsorption of boron from aqueous solutions using fly ash: batch and column studies

In the present paper, boron removal from aqueous solutions by adsorption was investigated. Fly ash particle size used in adsorption experiments was between 250 and 400 microm. During the experimental part of this study, the effect of parameters such as pH, agitation time, initial boron concentration, temperature, adsorbent dosage and foreign ion on boron removal were observed. In addition, adsorption kinetics, adsorption isotherm studies and column studies were made. Maximum boron removal was obtained at pH 2 and 25 degrees C. Thermodynamic parameters such as change in free energy (DeltaG degrees), enthalpy (DeltaH degrees), entropy (DeltaS degrees) were also determined. As a result of the kinetic studies, it was observed that the adsorption data conforms to the second degree kinetics model. In the isotherm studies, Langmuir and Freundlich isotherm models were applied and it was determined that the experimental data conformed to Langmuir isotherm model. Batch adsorbent capacity (q(o)) was calculated as 20.9 mg/g. The capacity value for column study was obtained by graphical integration as 46.2 mg/g. The Thomas and the Yoon-Nelson models were applied to experimental data to predict the breakthrough curves and to determine the characteristics parameters of the column useful for process design.     

Adsorptive removal of cationic (BY2) dye from aqueous solutions onto Turkish clay: Isotherm,kinetic, and thermodynamic analysis

ABSTRACT

The removal of Basic Yellow 2 (BY2), a cationic dye, from aqueous solution by using montmorillonite as adsorbent was studied in batch experiments. The effect of pH, agitation speed, adsorbent dosage, initial dye concentration ionic strength, and temperature on the removal of BY2 was also investigated. Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich isotherms were applied to fit the adsorption data of BY2 dye. Equilibrium data were well described by the typical Langmuir adsorption isotherm. The maximum monolayer adsorption capacity was calculated as 434.196 mg g^?1 from the Langmuir isotherm model. The adsorption data was fitted to both the pseudo-first-order, pseudo-second-order, Elovich, and intraparticle kinetic models, and the calculated values of the amount adsorbed at equilibrium (q_e) by pseudo-second-order equations were found to be in good agreement with the experimental values. The thermodynamic factors were also evaluated. The entropy change (ΔS*) was negative, suggesting that the adsorption process decreases in entropy and enthalpy change (ΔH*) was positive which indicates endothermic nature. The positive ΔG* value confirms the un-spontaneity of the process. In addition, a semiempirical model was calculated from kinetic data.     

Cadmium removal from aqueous solutions using hybrid eucalyptus wood based activated carbon: adsorption batch studies

Activated carbon has been equipped from wood of Hybrid Eucalyptus. Its adsorption capacity in elimination of cadmium from wastewater has been examined during batch adsorption experiments. The adsorption kinetics of this particular carbon for several factors such as adsorbent dosage and contact time of the cadmium were identified. The cadmium adsorption characteristics and the effect of the initial cadmium concentration on elimination capability were also studied. The optimum dosage of Hybrid Eucalyptus wood based activated carbon to remove 80 mg/L of cadmium from aqueous solution was 1.0 g/150 mL and the optimum contact time was 30 min. The isotherm data fit with both Langmuir and Freundlich isotherm models.     

Phosphate removal from aqueous solutions using raw and activated red mud and fly ash

The effect of acidification and heat treatment of raw red mud (RM) and fly ash (FA) on the sorption of phosphate was studied in parallel experiments. The result shows that a higher efficiency of phosphate removal was acquired by the activated samples than by the raw ones. The sample prepared by using the RM stirred with 0.25 M HCl for 2h (RM0.25), as well as another sample prepared by heating the RM at 700 degrees C for 2h (RM700), registered the maximum removal of phosphate (99% removal of phosphate). This occurred when they were used in the phosphate sorption studies conducted at pH 7.0 and 25 degrees C with the initial PO(4)(3-) concentration of 155 mg P/l. The FA samples treated in the same way described above can achieve 7.0 and 8.2 mg P/l phosphate removal for FA0.25 and FA700 respectively, corresponding to 45.2% and 52.9% removal. The activated materials performed higher phosphate removal over broader pH range compared with the raw ones. The influences of various factors, such as initial pH and initial phosphate concentration on the sorption capacity were also studied in batch equilibration technique. Solution pH significantly influenced the sorption. Each sample achieved the maximal removal of phosphate at pH 7.0. The amount of phosphate removal increased with the solute concentration. The Freundlich and Langmuir models were used to simulate the sorption equilibrium. The results indicate that the Langmuir model has a better correlation with the experimental data than the Freundlich model.     

Removal of Acid Violet 17 from aqueous solutions by adsorption onto activated carbon prepared from sunflower seed hull

The adsorption of Acid Violet 17 (AV17) was carried out using various activated carbons prepared from sunflower seed hull (SSH), an agricultural solid waste by-product. The effect of parameters such as agitation time, initial dye concentration, adsorbent dosage, pH and temperature were studied. The Langmuir and Freundlich isotherm models were applied and the Langmuir model was found to best report the equilibrium isotherm data. Langmuir adsorption capacity was found to be 116.27 mg/g. Kinetic data followed pseudo-second-order kinetics. Maximum colour removal was observed at pH 2.0. It was observed that the rate of adsorption improves with increasing temperature and the process is endothermic. The adsorbent surface was analysed with a scanning electron microscope. The results indicate that activated sunflower seed hull could be an attractive option for colour removal from dilute industrial effluents.     

Removal of chromium(VI) from aqueous solution by activated carbons: kinetic and equilibrium studies

The objective of this study is to assess the uptake of hexavalent chromium (Cr(VI)) from aqueous solutions onto activated carbons (AC) produced from wood. Two activated carbons are tested, a KOH-activated carbon and a commercial H3PO4-activated carbon (Acticarbone CXV). The adsorption of Cr(VI) is maximal at the lowest values of pH (pH 3) and increases with temperature for both adsorbents. The KOH-activated carbon shows higher capacity for adsorption of Cr(VI) than Acticarbone. The sorption isotherms fit the Langmuir model accurately. The adsorption reaction was found to obey a pseudo second-order rate. The activation energy and the pre-exponential factor as well as the thermodynamic functions related to adsorption reaction, DeltaS degrees , DeltaH degrees , DeltaG degrees , were determined. Nevertheless, the global reaction rate is probably controlled by the intra-particular diffusion of Cr(VI) and the mass diffusivity of Cr(VI) was evaluated.     

Impregnated activated carbon for the adsorption of Gd(III) radionuclides from aqueous solutions

Activated carbons (ACs) impregnated by FeCl₃, SnCl₄ and ZnCl₂ are used as adsorbents for the removal of Gd(III) radionuclides from aqueous solutions. Adsorption of Gd(III) is investigated as a function of pH, concentration of adsorbate, contact time, ionic strength and temperature. Gadolinium is efficiently removed (R%?>?95%) at pH values ≥4.8 (for FeAC and SnAC) and 2.9 (for ZnAC). The pseudo-first-order, the pseudo-second-order and Elovich kinetic models are used to analyze the kinetic data of Gd(III), at the studied concentrations (30, 100 and 200?mg/L) onto the employed materials. Of these models, Elovich is the only one that well-fitted the experimental kinetics onto the applied materials at all of the studied Gd(III) concentrations. Equilibrium data of Gd(III) are analyzed by the Freundlich, Temkin, Dubnin–Radushkevich (D-R) and Redlich–Petrson isotherm models. The adsorption efficiency of Gd(III) onto FeAC and SnAC is deleteriously affected by increasing the ionic strength, while adsorption onto ZnAC is unaffected. The thermodynamic parameters are calculated and it is revealed that the adsorption of Gd(III) onto the employed materials is an endothermic process. Desorption studies of Gd(III)-loaded ACs are performed using different desorbing agents (HCl, ZnCl₂, FeCl₃ and SnCl₄) at various concentrations (0.0005, 0.0025, 0.01 and 0.025?M).     

Modeling studies on simultaneous adsorption of phenol and resorcinol onto granular activated carbon from simulated aqueous solution

The modelling study on simultaneous adsorption of phenol and resorcinol onto granular activated carbon (GAC) in multicomponent solution was carried out at 303K by conducting batch experiments at initial concentration range of 100-1000 mg/l. Three equilibrium isotherm models for multicomponent adsorption studies were considered. In order to determine the parameters of multicomponent adsorption isotherms, individual adsorption studies of phenol and resorcinol on GAC were also carried out. The experimental data of single and multicomponent adsorption were fitted to these models. The parameters of multicomponent models were estimated using error minimization technique on MATLAB R2007a. It has been observed that for low initial concentration of adsorbate (100-200mg/l), modified Langmuir model represents the data very well with the adsorption constant (Q(0)), 216.1, 0.032 and average relative error (ARE) of 8.34, 8.31 for phenol and resorcinol respectively. Whereas, for high initial concentration of adsorbate (400-1000 mg/l), extended Freundlich model represents the data very well with adsorption constant (K(F)) of 25.41, 24.25 and ARE of 7.0, 6.46 for phenol and resorcinol respectively. The effect of pH of solution, adsorbent dose and initial concentrations of phenol and resorcinol on adsorption behaviour was also investigated.